☆ 4.5 Article

Grain refinement and high-frequency properties of spark plasma sintered MnZn ferrite

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2024)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Structural, morphological and magnetic properties of low temperature sintered LiZnTiBi ferrites

Jun Zhou et al.

Summary: Interest in enhancing magnetic performances of low-sintered ceramic materials by co-doping of oxide nanoparticle and low-melting glass has thrived. Usually this process includes performance enhancement of ceramic attributed to grain growth and deterioration caused by excess additives.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Add to Collection

Article Materials Science, Ceramics

Two-step doping of SiO2 and CaO for high-frequency MnZn power ferrites

Jiafeng Xu et al.

Summary: SiO2 and CaO are effective co-doping oxides for low-loss MnZn soft ferrites, but the synergistic effect is not well understood. In this study, the effect of SiO2 and CaO was investigated, and a two-step doping strategy for high-frequency MnZn ferrites was proposed. SiO2 facilitated the formation of mono-domain grains, reducing residual loss at high frequency. CaO dissolved into the ferrite matrix, improving resistivity but leading to abnormal growth of grains. Coating MnZn particles with SiO2 effectively suppressed the reaction between CaO and the ferrite matrix, resulting in the formation of a continuous calcium silicate grain boundary phase. This strategy achieved superior high-frequency performance desired by miniaturized electronic devices.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2023)

Add to Collection

Article Chemistry, Physical

Influence of MnZn Ferrite Homogeneous Fibers on the Microstructure, Magnetic, and Mechanical Properties of MnZn Ferrite Materials

Yajing Shang et al.

Summary: MnZn ferrite homogeneous fibers were synthesized and used as reinforcing phase in MnZn ferrite materials. The doping of homogeneous fibers significantly affected the microstructure, magnetic, and mechanical properties of the materials. The addition of a certain content of homogeneous fibers resulted in more uniform and compact crystal structures, lower porosity, and fewer grain boundaries, leading to improved magnetic and mechanical properties. The best properties were obtained with a fiber content of about 2%.

MATERIALS (2023)

Add to Collection

Article Materials Science, Ceramics

Study of thermal, structural, microstructural, vibrational and elastic properties of MnxMg0.8-xZn0.2Fe2O4 (0.1 ≤ x≤ 0.7) ferrite nanoparticles

S. A. V. Prasad et al.

Summary: Sol-gel auto combustion method was used to synthesize MnxMg0.8-xZn(0.2)Fe(2)O(4) nano ferrites. The ferrite samples showed stable cubic spinel phase with minor amounts of α-Fe2O3 phase. The mechanical behavior of the ferrite compositions was found to be ductile.

CERAMICS INTERNATIONAL (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Particles size-dependent magnetic properties of a FeSiAl soft magnetic composite with hybrid insulating coating for MHz applications

Wanjia Li et al.

Summary: In this study, water-soluble silicone resin modified spherical-FeSiAl soft magnetic composites with different particle sizes were prepared and their effects on permeability, magnetic loss, and DC bias were investigated. The results show that smaller particle sizes lead to a decrease in domain wall resonance and an increase in spin rotation, while larger particles exhibit multi-domain behavior that restricts low-frequency permeability. Two stages with different loss mechanisms were observed, and the sudden increase in loss near 70 kHz is attributed to the insulation coating short circuiting at high frequency due to space charge polarization. Electrochemical analysis confirmed the insulation of this soft magnetic composite, which may have implications for the development of MHz frequency semiconductor power devices.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2023)

Add to Collection

Article Chemistry, Physical

Preparation of Densified Fine-Grain High-Frequency MnZn Ferrite Using the Cold Sintering Process

Yao Ying et al.

Summary: Densified MnZn ferrite ceramics were prepared using the cold sintering process under pressure, with an acetate ethanol solution used as the transient solvent. The effects of the transient solvent, pressure, and annealing temperature on the density, micromorphology, and magnetic properties of the sintered MnZn ferrites were studied. The cold sintering process, along with the transient solvent and high pressure, is crucial for achieving densified MnZn ferrite. Additionally, the annealing treatment is necessary to increase the density further and reduce power loss at high frequencies.

MATERIALS (2023)

Add to Collection

Article Materials Science, Ceramics

Frequency dispersion model of the complex permeability of soft ferrites in the microwave frequency range

Antonio Barba-Juan et al.

Summary: A mathematical model has been proposed in this study to fit the measured magnetic permeability spectra of Cu-doped nickel-zinc polycrystalline ferrites, with a range of average grain sizes and relative densities. For the first time, domain-wall motion and spin rotation contributions to magnetic permeability have been integrated with microstructure in the model, highlighting their relative influences at different angular frequencies.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of sintering temperature on microstructure, initial permeability and electric behaviour of Ni-Mn-Zn ferrites

U. B. Gawas et al.

Summary: The study investigated the effects of sintering temperature on microstructure, initial permeability, and electrical behavior of Ni0.5-xMnxZn0.5Fe2O4 prepared using the precursor combustion method. The results showed changes in properties of the ferrites with increasing Mn substitution. The findings suggest the suitability of these ferrites for high frequency device applications.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Add to Collection

Article Materials Science, Ceramics

Effect of compressive stress on power loss of Mn-Zn ferrite for high-frequency applications

Zhaocheng Li et al.

Summary: In this study, low-power-loss Mn-Zn ferrite was prepared using traditional ceramic sintering process. The sample exhibited good wide-temperature stability of power loss. The effect of uniaxial compressive stress on power loss at different frequencies was investigated, and the mechanism behind the stress-induced power loss was clarified. The findings are beneficial for the development of new soft ferrite materials with low stress sensitivity for high-frequency applications.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Low power loss manganese ferrites with the addition of Ta2O5 for MHz applications

Yao Ying et al.

Summary: Low power loss manganese ferrites in the frequency range of 1-3 MHz have been developed by adding Ta2O5, exhibiting excellent temperature stability and P-cv performance.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Perspectives on the spark plasma sintering process

Zuhair A. Munir et al.

Summary: The Viewpoint paper discusses the success of the spark plasma sintering process, providing a historical account, an updated overview of accomplishments, and highlighting selected examples.

JOURNAL OF MATERIALS SCIENCE (2021)

Add to Collection

Article Materials Science, Ceramics

Development of Mn-Zn power ferrite with low losses over a broad temperature range for applications in the high frequency region of 0.5-3 MHz

Nengchao Wang et al.

Summary: In this work, Mn-Zn power ferrites with low loss operating in the frequency range of 0.5-3 MHz were successfully fabricated, with an optimal Co3O4 content of 0.35 wt%. The material exhibited ideal power loss characteristics over a broad temperature range and is suitable for high-frequency power conversion electronics applications.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal instabilities of cobalt containing MnZn ferrite cores for medium (500 kHz) frequency applications

G. Kogias et al.

Summary: The study showed that Mn-Zn ferrites doped with cobalt experienced significant reduction in power loss during thermal ageing, with the addition of TiO2 slowing down the ageing process while SnO2 did not have any apparent effect.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Influence of microstructure optimization on magnetic and thermal properties of MnZn ferrite

Fan Luo et al.

Summary: The industrial preparation of high magnetic permeability and low magnetic loss MnZn ferrite involved extrusion with a large aspect ratio using a three-phase asynchronous machine, followed by high-temperature sintering in a tube furnace. Increasing sintering temperature and oxygen partial pressure initially improved effective permeability and quality factor of the MnZn ferrite, reaching optimal values at 1260 degrees C and 3% oxygen partial pressure, respectively. The thermal conductivity showed a parabolic trend with oxygen partial pressure, peaking at 3%, while total magnetic loss exhibited a valley bottom temperature that shifted to higher values with increased oxygen partial pressure. MnZn ferrite prepared with 3% oxygen partial pressure demonstrated the lowest total loss at 90 degrees C.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Add to Collection

Article Chemistry, Physical

Grain boundary engineering of power inductor cores for MHz applications

Parisa Andalib et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Ceramics

Development of high-temperature high-permeability MnZn power ferrites for MHz application by Nb2O5 and TiO2 co-doping

Shengbo Yi et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Chemistry, Physical

Ultra-low core losses at high frequencies and temperatures in MnZn ferrites with nano-BaTiO3 additives

Guohua Wu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Review Materials Science, Ceramics

A review on MnZn ferrites: Synthesis, characterization and applications

Preeti Thakur et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Ceramics

Co2O3 and SnO2 doped MnZn ferrites for applications at 3-5 MHz frequencies

Akhlaq Hussain et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Review of Fe-6.5 wt%Si high silicon steel-A promising soft magnetic material for sub-kHz application

Gaoyuan Ouyang et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2019)

Add to Collection

Article Physics, Condensed Matter

Effects of second milling time to the core loss of MnZn ferrites for high frequency application

Lingfeng Wang et al.

PHYSICA B-CONDENSED MATTER (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Effect of CaCO3 and V2O5 Composite Additives on the Microstructure and Magnetic Property of MnZn Ferrites

Guohua Wu et al.

IEEE TRANSACTIONS ON MAGNETICS (2018)

Add to Collection

Article Chemistry, Physical

Innovative ferrite nanofibres reinforced soft magnetic composite with enhanced electrical resistivity

J. Fuzer et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Low loss MnZn ferrites for applications in the frequency region of 1-3 MHz

S. Tokatlidis et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2018)

Add to Collection

Article Thermodynamics

Microstructure and thermal analysis of lithium ferrite pre-milled in a high-energy ball mill

E. N. Lysenko et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2018)

Add to Collection

Review Multidisciplinary Sciences

Soft magnetic materials for a sustainable and electrified world

Josefina M. Silveyra et al.

SCIENCE (2018)

Add to Collection

Article Materials Science, Ceramics

Uniaxial anisotropy and enhanced magnetostriction of CoFe2O4 induced by reaction under uniaxial pressure with SPS

A. Aubert et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Add to Collection

Article Engineering, Chemical

Simultaneous synthesis and densification of nanocrystalline magnesium silicide compound by spark plasma sintering

Porselvan Vivekanandhan et al.

POWDER TECHNOLOGY (2017)

Add to Collection

Article Materials Science, Ceramics

Temperature stable MnZn ferrites for applications in the frequency region of 500 kHz

G. Kogias et al.

CERAMICS INTERNATIONAL (2016)

Add to Collection

Article Materials Science, Ceramics

MnZn power ferrite with high Bs and low core loss

Dong Liu et al.

CERAMICS INTERNATIONAL (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Structure and magnetic properties of ZnO coated MnZn ferrite nanoparticles

Shanigaram Mallesh et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis of a low loss Mn-Zn ferrite for power applications

Vasiliki Tsakaloudi et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of zinc concentration on structure, complex permittivity and permeability of Ni-Zn ferrites at high frequency

Nan-Nan Jiang et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2016)

Add to Collection

Article Engineering, Electrical & Electronic

Effect of TiO2 and Nb2O5 additives on the magnetic properties of cobalt-modified MnZn ferrites

Zhonghao Wei et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2016)

Add to Collection

Article Chemistry, Physical

Cation distribution and magnetic property of Ti/Sn-substituted manganese-zinc ferrites

Ke Sun et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Proceedings Paper Physics, Applied

New MnZn Ferrite with Low Losses at 500 kHz over a Broad Temperature Range

George Kogias et al.

20TH INTERNATIONAL CONFERENCE ON MAGNETISM, ICM 2015 (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of nano-TiO2 and normal size TiO2 additions on the microstructure and magnetic properties of manganese-zinc power ferrites

Bing Sun et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2014)

Add to Collection

Letter Materials Science, Multidisciplinary

Improvement of the properties of MnZn ferrite power cores through improvements on the microstructure of the compacts

G. Kogias et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2012)

Add to Collection

Article Physics, Applied

Temperature and frequency characteristics of low-loss MnZn ferrite in a wide temperature range

Ke Sun et al.

JOURNAL OF APPLIED PHYSICS (2011)

Add to Collection

Article Chemistry, Physical

Development of high DC-bias Mn-Zn ferrite working at frequency higher than 3 MHz

Yapi Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

Add to Collection

Article Physics, Condensed Matter

Temperature dependence of core losses at high frequency for MnZn ferrites

Ke Sun et al.

PHYSICA B-CONDENSED MATTER (2010)

Add to Collection

Article Chemistry, Physical

Analysis of losses in NiO doped MnZn ferrites

Ke Sun et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Add to Collection

Article Materials Science, Multidisciplinary

The grain size effect on the magnetic properties in NiZn ferrite and the quality factor of the inductor

K. Kawano et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and magnetic properties of Sn-substituted MnZn ferrites

Zhiyong Xu et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2009)

Add to Collection

Review Materials Science, Multidisciplinary

Recent advances in processing and applications of microwave ferrites

Vincent G. Harris et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Study of Mn3O4 doping to improve the magnetic properties of MnZn ferrites

Ming Gu et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of nanoparticles on the magnetic properties of Mn-Zn soft ferrite

Preeti Mathur et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Influences of Bi2O3 on microstructure and magnetic properties of MnZn ferrite

Zhong Yu et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Study on electromagnetic properties of MnZn ferrites with Fe-poor composition

Huang Aiping et al.

MATERIALS CHEMISTRY AND PHYSICS (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Low temperature processing of Mn-Zn nanoferrites

P. Mathur et al.

JOURNAL OF MATERIALS SCIENCE (2007)

Add to Collection

Article Chemistry, Multidisciplinary

Study of dielectric behaviour of Mn-Zn nano ferrites

A. Thakur et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of SnO2 addition on the magnetic properties of manganese zinc ferrites

AP Huang et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2006)

Add to Collection

Review Materials Science, Multidisciplinary

The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method

ZA Munir et al.

JOURNAL OF MATERIALS SCIENCE (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Low sintering temperature MnZn-ferrites for power applications in the frequency region of 400 kHz

P Papazoglou et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Recent development of low-loss grain-oriented silicon steel

Y Ushigami et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2003)

Add to Collection

Article Materials Science, Ceramics

Preparation and characterization of nanosize Mn0.4Zn0.6Fe2O4 ferrite by citrate precursor method

A Thakur et al.

CERAMICS INTERNATIONAL (2003)

Add to Collection

Article Materials Science, Multidisciplinary

The effect of Nb2O5 dopant on the structural and magnetic properties of MnZn-ferrites

VT Zaspalis et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2002)

Add to Collection

Article Materials Science, Ceramics

Co-firing process using conventional and microwave sintering technologies for MnZn- and NiZn-ferrites

CY Tsay et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2001)

Add to Collection

Article Materials Science, Ceramics

Rapid sintering of nanocrystalline ZrO2(3Y) by spark plasma sintering

W Li et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2000)

Add to Collection

Article Physics, Applied

Analysis of power loss at high frequency for MnZn ferrites

T Kawano et al.

JOURNAL OF APPLIED PHYSICS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.