☆ 4.7 Article

Inverse identification of in-situ curing shrinkage using a method combining 3D digital image correlation and finite-element simulation

MEASUREMENT (2023)

Related references

Note: Only part of the references are listed.

Review Computer Science, Artificial Intelligence

A review of artificial fish swarm algorithms: recent advances and applications

Farhad Pourpanah et al.

Summary: The Artificial Fish Swarm Algorithm (AFSA) is a Swarm Intelligence (SI) methodology inspired by the ecological behaviors of fish schooling. It has been widely used for solving real-world optimization problems due to its flexibility, fast convergence, and insensitivity to initial parameter settings. This paper provides a concise review of continuous AFSA and its improvements, hybrid models, and applications. It also discusses parameter modifications, procedure, and sub-functions of AFSA, along with the reasons for enhancements and comparison results with other methods. Furthermore, hybrid, multi-objective, and dynamic AFSA models for continuous optimization problems are analyzed, and future research directions for advancing AFSA-based models are highlighted.

ARTIFICIAL INTELLIGENCE REVIEW (2023)

Add to Collection

Article Engineering, Chemical

Analyzing Deformation of a Cationic Photopolymerized Epoxy Adhesive during the Curing Process in UV Irradiation and Dark Reaction based on Finite Element Method and Measurement

A. Takahashi et al.

Summary: Precise adjustments and adhesive positioning are crucial in maintaining optical axis alignment in the manufacturing of optical products. This study investigates the displacement of optical components resulting from the deformation of a UV-cured adhesive and highlights the importance of understanding the adhesive joint's behavior over time.

JOURNAL OF ADHESION (2023)

Add to Collection

Article Engineering, Mechanical

On characterization of cohesive zone model (CZM) based upon digital image correlation (DIC) method

Xintao Huo et al.

Summary: The cohesive zone model (CZM) is widely used in numerical simulations of interfacial fracture behaviors. This paper aimed to accurately identify CZM parameters through experimental measurement and to derive the traction-separation law using the digital image correlation (DIC) technique. By testing DCB specimens with a ductile adhesive layer, the study successfully verified the effectiveness of the proposed method for extracting the traction-separation law and achieving accurate simulation of adhesive joints.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Polymer Science

Measurement of effective cure shrinkage of epoxy-based molding compound by fiber Bragg grating sensor using two-stage curing process

Changsu Kim et al.

Summary: A two-stage curing process has been developed to measure the effective cure shrinkage in an epoxy-based molding compound using an embedded fiber Bragg grating sensor. Technical considerations were taken to ensure uniform curing and accurate measurement of the EMC with a filler content of 88 wt%, resulting in a measured ECS value of 0.077% with confirmed repeatability.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Add to Collection

Article Materials Science, Characterization & Testing

Effects of loading rate, temperature, and thickness on the tensile strength of precision adhesive joints

Lei Guo et al.

Summary: The influences of micron bondline thickness, temperature, and loading rate on the tensile strength of adhesive joints in precision adhesive structures were studied. The results showed that the tensile strength initially increased and then linearly decreased with bondline thickness, with the peak strength occurring at a thickness of approximately 30 μm. The maximum tensile strength increased by 28.6% as thickness increased from 10 to 30 μm at a loading rate of 1 mm/min. The tensile strength decreased by more than 33% at different bondline thicknesses as temperature increased from -30 to 110 degrees C. Reducing bondline thickness to less than 10 μm resulted in a weak bonding interface. The tensile strength increased with loading rate, exhibiting a strain-rate hardening effect below the T-g. The plastic-damage characteristic became clearer on the fractured surface as temperature increased.

POLYMER TESTING (2022)

Add to Collection

Article Engineering, Multidisciplinary

A prediction-correction method for fast and accurate initial displacement field estimation in digital image correlation

Hongfan Yang et al.

Summary: This paper proposes an efficient method for initial displacement estimation, which finds the initial displacement of each subset through a prediction-correction approach. The method has been validated to have excellent features of accuracy, effectiveness, and convergence. The authors also conducted a three-dimensional surface reconstruction experiment using the proposed method, obtaining high geometric accuracy.

MEASUREMENT SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Deformation Evolution Law of Surfacing Welding on Thin Bending Plates Based on the Three-Dimensional Thermal Digital Image Correlation Method

Xiqiang Ma et al.

Summary: This paper proposes a non-contact detection method based on the three-dimensional thermal digital image correlation (DIC) method for the 3D full-field dynamic measurement of metal thin bending plate surfaces. It also studies the evolution law of in-plane and out-of-plane deformation during surfacing welding and cooling, and explores the influence of curvature on the shrinkage deformation of the weld bead.

COATINGS (2022)

Add to Collection

Article Engineering, Multidisciplinary

In-situ noncontact measurement system for nozzle throat deformation in high-temperature gas heating via laser speckle digital image correlation with wavelet smoothing of displacement field

Fujia Liu et al.

Summary: This paper proposes a non-contact full-field deformation measurement system for evaluating nozzle throat deformation in high-temperature gas heating tests. By using laser speckle Digital Image Correlation with wavelet smoothing of displacement field, a smoother displacement field for deformation evaluation can be obtained.

MEASUREMENT (2022)

Add to Collection

Article Materials Science, Ceramics

Micro-scale evolution of mechanical properties of glass-ceramic sealant for solid oxide fuel/electrolysis cells

M. Fakouri Hasanabadi et al.

Summary: This study investigated the mechanical properties of a sealant material using indentation testing, including elastic modulus, hardness, and fracture toughness. Heat treatment did not significantly alter the mechanical properties, and potential self-healing behavior of the sealant was observed.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Investigation of mechanical performances and polymerization shrinkage of dual-cured resin composites as core build-up material

Sin Man Chan et al.

Summary: The study found that the novel dual-cured resin composites showed comparable flexural and bond strength to the conventional light-cured resin composites, but with significantly higher polymerization shrinkage.

DENTAL MATERIALS JOURNAL (2021)

Add to Collection

Article Materials Science, Characterization & Testing

Effects of surface treatment and adhesive thickness on the shear strength of precision bonded joints

Lei Guo et al.

Summary: The study found that different surface treatments have an impact on the bond strength of single-lap-joint specimens, with PAA treatment significantly improving the bond strength. Additionally, bond strength is not only determined by surface roughness value or wettability, but also by surface characteristics such as peak density, nano-scale pores, and texture direction.

POLYMER TESTING (2021)

Add to Collection

Article Engineering, Manufacturing

Effects of assembly errors and bonding defects on the centroid drift of a precision sleeve structure

Jian-Hua Liu et al.

Summary: This paper presents a numerical study on the bonding assembly of a sleeve structure of a precision inertial device using a finite element method, where the effects of assembly errors and bonding defects on the centroid drift of the sleeve structure were quantitatively analyzed. The study can help understand the zero-drift mechanism of the precision inertial device and provide valuable data for error compensation.

ADVANCES IN MANUFACTURING (2021)

Add to Collection

Article Materials Science, Composites

In-Situ Investigation of Resin Shrinkage in the Composite Manufacturing Environment

Samarth Motagi et al.

Summary: A novel approach is developed to measure the resin shrinkage and strain evolution of an epoxy resin during composite manufacturing process, with digital image correlation and differential scanning calorimetry used to analyze the processing induced strains and correlate them to cure-state. The different mechanisms involved in polymer strain evolution during composite processing are discussed in this study.

APPLIED COMPOSITE MATERIALS (2021)

Add to Collection

Article Engineering, Mechanical

A pre-processing method for digital image correlation on rotating structures

Jiasheng Huang et al.

Summary: The paper discusses the limitations of DIC algorithms in large rotation cases and introduces the Phase Mapping Method (PMM) to improve the efficiency of initial parameter guessing. By rearranging images and introducing a fast phase detection approach to automate PMM, the success rate and efficiency of DIC algorithms can be significantly improved.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Liquid crystal epoxy resins with high intrinsic thermal conductivities and their composites: A mini-review

Kunpeng Ruan et al.

Summary: Traditional epoxy resins have low intrinsic thermal conductivity coefficients, but high thermal conductivity can be achieved by designing and changing the structures of molecules. The development prospects of intrinsically thermally conductive liquid crystal epoxy resins and their composites are promising.

MATERIALS TODAY PHYSICS (2021)

Add to Collection

Article Computer Science, Artificial Intelligence

Twin support vector machine based on improved artificial fish swarm algorithm with application to flame recognition

Yikai Gao et al.

APPLIED INTELLIGENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Volumetric effective cure shrinkage measurement of dual curable adhesives by fiber Bragg grating sensor

Sukrut Prashant Phansalkar et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Add to Collection

Article Computer Science, Artificial Intelligence

Fuzzy Mathematical Programming and Self-Adaptive Artificial Fish Swarm Algorithm for Just-in-Time Energy-Aware Flow Shop Scheduling Problem With Outsourcing Option

Erfan Babaee Tirkolaee et al.

IEEE TRANSACTIONS ON FUZZY SYSTEMS (2020)

Add to Collection

Article Engineering, Civil

Digital image correlation (DIC) on fresh cement mortar to quantify settlement and shrinkage

Evin Dildar Dzaye et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2019)

Add to Collection

Article Construction & Building Technology

Quantitative analysis of the influence of synthetic fibres on plastic shrinkage cracking using digital image correlation

I. M. G. Bertelsen et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Polymer Science

Polymerization Shrinkage Evaluation of Restorative Resin-Based Composites Using Fiber Bragg Grating Sensors

Rodrigo Lins et al.

POLYMERS (2019)

Add to Collection

Article Engineering, Manufacturing

Cure strain monitoring in composite laminates with distributed optical sensor

Jung-Ting Tsai et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection

Article Materials Science, Characterization & Testing

Evaluation of in-situ shrinkage and expansion properties of polymer composite materials for adhesive anchor systems by a novel approach based on digital image correlation

Gerald Singer et al.

POLYMER TESTING (2019)

Add to Collection

Review Computer Science, Interdisciplinary Applications

An effective artificial fish swarm optimization algorithm for two-sided assembly line balancing problems

Yuguang Zhong et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2019)

Add to Collection

Article Construction & Building Technology

Using digital image correlation to evaluate plastic shrinkage cracking in cement-based materials

Pengfei Zhao et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Review Engineering, Multidisciplinary

Digital image correlation for surface deformation measurement: historical developments, recent advances and future goals

Bing Pan

MEASUREMENT SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Engineering, Mechanical

Model of moisture absorption by adhesive joint

Veronica Bonilla Mora et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

Add to Collection

Article Engineering, Mechanical

Moisture contamination detection in adhesive bond using embedded FBG sensors

Magdalena Mieloszyk et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

Add to Collection

Article Mechanics

Monitoring the gelation and effective chemical shrinkage of composite curing process with a novel FBG approach

Haixiao Hu et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Engineering, Manufacturing

Chemical and thermal shrinkage in thermosetting prepreg

Oleksandr G. Kravchenko et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Mechanical properties, volumetric shrinkage and depth of cure of short fiber-reinforced resin composite

Akimasa Tsujimoto et al.

DENTAL MATERIALS JOURNAL (2016)

Add to Collection

Article Engineering, Multidisciplinary

High precision pycnometer for volumetric measurement of polymerization shrinkage in light cured dental composites

Anton Khomenko et al.

MEASUREMENT (2016)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

Polymerization shrinkage assessment of dental resin composites: a literature review

Dalia Kaisarly et al.

ODONTOLOGY (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Synthesis and application of epoxy resins: A review

Fan-Long Jin et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Digital image correlation measurement of resin chemical and thermal shrinkage after gelation

Oleksandr G. Kravchenko et al.

JOURNAL OF MATERIALS SCIENCE (2015)

Add to Collection

Article Optics

High-efficiency and high-accuracy digital image correlation for three-dimensional measurement

Yue Gao et al.

OPTICS AND LASERS IN ENGINEERING (2015)

Add to Collection

Article Computer Science, Artificial Intelligence

Artificial fish swarm algorithm: a survey of the state-of-the-art, hybridization, combinatorial and indicative applications

Mehdi Neshat et al.

ARTIFICIAL INTELLIGENCE REVIEW (2014)

Add to Collection

Article Engineering, Chemical

Development of a dilatometer and measurement of the shrinkage behaviour of adhesives during cure

H. Yu et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)

Add to Collection

Article Optics

Feature matching for automated and reliable initialization in three-dimensional digital image correlation

Yihao Zhou et al.

OPTICS AND LASERS IN ENGINEERING (2013)

Add to Collection

Article Engineering, Multidisciplinary

Application of digital image correlation to full-field measurement of shrinkage strain of dental composites

Jian-ying Li et al.

JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A (2013)

Add to Collection

Article Materials Science, Characterization & Testing

Volume changes in a filled elastomer studied via digital image correlation

Jordan de Crevoisier et al.

POLYMER TESTING (2012)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

Current perspectives on post systems: a literature review

C. Goracci et al.

AUSTRALIAN DENTAL JOURNAL (2011)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Spatially resolved assessments of composite shrinkage in MOD restorations using a digital-image-correlation technique

Shu-Fen Chuang et al.

DENTAL MATERIALS (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Simultaneous Measurement of Effective Chemical Shrinkage and Modulus Evolutions During Polymerization

Y. Wang et al.

EXPERIMENTAL MECHANICS (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Digital Image Correlation

Nick McCormick et al.

MATERIALS TODAY (2010)

Add to Collection

Article Materials Science, Characterization & Testing

Evaluation of cure shrinkage measurement techniques for thermosetting resins

Darshil U. Shah et al.

POLYMER TESTING (2010)

Add to Collection

Article Computer Science, Artificial Intelligence

Lucas-Kanade 20 years on: A unifying framework

S Baker et al.

INTERNATIONAL JOURNAL OF COMPUTER VISION (2004)

Add to Collection

Article Materials Science, Composites

In-situ measurement of chemical shrinkage of MY750 epoxy resin by a novel gravimetric method

C Li et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.