☆ 4.6 Article

A Nb521 alloy processed by selective laser melting: Microstructure and tensile properties

VACUUM (2024)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Study on the microstructure evolution and dynamic recrystallization mechanism of selective laser melted Inconel 718 alloy during hot deformation

Wei Le et al.

Summary: In this study, the hot deformation behavior, microstructure evolution, and dynamic recrystallization (DRX) behavior of selective laser melted (SLM) 718 alloy were investigated using isothermal compression testing, electron back scattered diffraction (EBSD) technology, and transmission electron microscope (TEM). The results reveal that the deformation condition has a significant impact on the flow behavior and DRX grain of the alloy. Increasing the deformation temperature or decreasing the strain rate leads to an increase in the volume fraction and average size of DRX grains. The DRX mechanism of SLM 718 alloy involves discontinuous dynamic recrystallization (DDRX) characterized by initial grain boundary and regenerated grain boundary bulging, and continuous dynamic recrystallization (CDRX) occurring inside the grain characterized by progressive subgrain rotation and homogeneous misorientation increase.

VACUUM (2023)

Add to Collection

Article Nuclear Science & Technology

Corrosion behavior of refractory metals in liquid lead at 1000?C for 1000 h

Zunqi Xiao et al.

Summary: Lead-based fast reactor (LFR) is one of the most promising reactors in Generation IV nuclear systems, with high efficiency and operation temperatures up to 800 degrees C or higher. Corrosion of cladding materials with lead at high temperatures is a key issue in high-efficiency LFR. This study investigated the corrosion behavior of refractory metals (Nb, Nb521, and Mo-0.5La) in static lead at 1000 degrees C for 1000 h. The results showed that Nb and Nb521 exhibited intense dissolution corrosion with lead penetration along grain boundaries, while Mo-0.5La showed better corrosion resistance with no lead penetration observed. However, surface etching indicated some degree of corrosion in Mo-0.5La. The results suggest that Mo-0.5La is compatible with lead up to 1000 degrees C, while Nb and Nb alloys may not be compatible with lead in high-efficiency LFR at such high temperatures.

NUCLEAR ENGINEERING AND TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal and mechanical properties of selective laser melted and heat treated H13 hot work tool steel

Yiwei Sun et al.

Summary: Fabricating molds and dies using additive manufacturing (AM) technology is attractive for higher cooling efficiency. This study investigated the thermal and mechanical properties of an H13 tool steel processed by selective laser melting (SLM) and identified the factors affecting its thermal conductivity.

MATERIALS & DESIGN (2022)

Add to Collection

Article Materials Science, Multidisciplinary

The oxidation behaviors of high-purity niobium for superconducting radio-frequency cavity application in vacuum heat treatment

Mingming Yu et al.

Summary: This study investigated the impact of vacuum heat treatment on the chemical composition and impurities distribution on the surface and depth of high-purity niobium. X-ray photoelectron spectroscopy (XPS) results showed that the heat treatment temperature affected the composition of surface oxide, while the influence of nitrogen was not confirmed. This study is important for understanding the effect of material properties on RF performance and optimizing surface treatment process for SRF Nb cavities.

VACUUM (2022)

Add to Collection

Review Thermodynamics

Additive Manufacturing for Enhancing Thermal Dissipation in Heat Sink Implementation: A Review

Bakhtiyar Mohammad Nafis et al.

Summary: This review paper discusses the successes and challenges of utilizing 3D printed heat sinks in electronics cooling applications, evaluating the current state of additively manufactured thermal management solutions and showcasing the great potential of this emerging sector.

HEAT TRANSFER ENGINEERING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

New Opportunities in Refractory Alloys

N. R. Philips et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)

Add to Collection

Article Automation & Control Systems

The effect of scan path on thermal gradient during selective laser melting

Benjamin Blackford et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

The crystal growth, intercellular spacing and microsegregation of selective laser melted Inconel 718 superalloy

Pan Tao et al.

VACUUM (2019)

Add to Collection

Article Thermodynamics

Thermodynamic assessment of the C-Zr-Nb ternary system

Yinping Zeng et al.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2018)

Add to Collection

Article Thermodynamics

Transpiration cooling for additive manufactured porous plates with partition walls

Gan Huang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Nanoscience & Nanotechnology

On the occurrence of dynamic strain aging in C-103 Nb based alloy

S. S. Panwar et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of internal oxidation on the microstructure and mechanical properties of C-103 alloy

M. Sankar et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of W content on high temperature oxidation resistance and room temperature mechanical properties of hot-pressing Nb-XW alloys

Bairu Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Add to Collection

Article Biochemical Research Methods

NIH Image to ImageJ: 25 years of image analysis

Caroline A. Schneider et al.

NATURE METHODS (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Thermodynamic evaluation of the Nb-O-Zr system

R. Jerlerud Perez et al.

JOURNAL OF NUCLEAR MATERIALS (2007)

Add to Collection

Review Materials Science, Multidisciplinary

A review of refractory metal alloys and mechanically alloyed-oxide dispersion strengthened steels for space nuclear power systems

MS El-Genk et al.

JOURNAL OF NUCLEAR MATERIALS (2005)

Add to Collection

Article Chemistry, Physical

Effect of carbon on the tensile properties of Nb-Mo-W alloys at 1773 K

WY Kim et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2002)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of W addition on compressive strength of Nb-10Mo-10Ti-18Si-Base in-situ composites

JB Sha et al.

MATERIALS TRANSACTIONS JIM (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.