☆ 4.8 Article

Diffusible Capping Layer Enabled Homogeneous Crystallization and Component Distribution of Hybrid Sequential Deposited Perovskite

ADVANCED MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Intermediate-phase engineering via dimethylammonium cation additive for stable perovskite solar cells

David P. McMeekin et al.

Summary: Achieving long-term stability is the key challenge for widespread commercialization of perovskite solar cells. This study introduces a high-temperature dimethyl-sulfoxide-free processing method to control the crystallization of perovskite films, effectively improving the material quality and operational stability of the devices. The encapsulated devices showed improved lifetimes, with a median T80 of 1,190 hours and a champion device reaching a T80 of 1,410 hours.

NATURE MATERIALS (2023)

Add to Collection

Article Multidisciplinary Sciences

All-perovskite tandem solar cells with 3D/3D bilayer perovskite heterojunction

Renxing Lin et al.

NATURE (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient Perovskite/Silicon Tandem Solar Cells on Industrially Compatible Textured Silicon

Xin Luo et al.

Summary: An anion-engineered additive strategy is developed to control the crystallization process of wide-bandgap perovskite films on industrially textured silicon, resulting in improved film crystallinity and reduced trap density. This strategy enables the fabrication of 28.6%-efficient perovskite/silicon tandem solar cells, which retain over 80% of their initial performance after 2000 hours of operation under full 1-sun illumination.

ADVANCED MATERIALS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Modulation of nucleation and crystallization in PbI2 films promoting preferential perovskite orientation growth for efficient solar cells

Wenlong Shao et al.

Summary: This study presents an effective method to improve the crystalline quality and device performance of formamidinium-rich lead iodide perovskite solar cells by modulating the nucleation and crystallization of PbI2 films using PFAT.

ENERGY & ENVIRONMENTAL SCIENCE (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Omnidirectional diffusion of organic amine salts assisted by ordered arrays in porous lead iodide for two-step deposited large-area perovskite solar cells

Jiacheng He et al.

Summary: A porous PbI2 layer with ordered array structure is successfully fabricated by integrating a succinamide (SA) additive with nanoimprinting technology, leading to omnidirectional diffusion and sufficient conversion to perovskites. The unencapsulated device achieves an efficiency of 23.56% and excellent long-term humidity stability. The perovskite solar cell and module achieve impressive efficiencies of 21.57% and 16.42%, respectively. This work paves the way for large-scale fabrication of high-performance perovskite photovoltaic devices.

ENERGY & ENVIRONMENTAL SCIENCE (2023)

Add to Collection

Article Multidisciplinary Sciences

Interface passivation for 31.25%-efficient perovskite/silicon tandem solar cells

Xin Yu Chin et al.

Summary: Silicon solar cells are reaching their efficiency limit of 29%, but this can be surpassed by using advanced device structures. In this study, we created a tandem device with a perovskite layer on top of a silicon bottom cell to enhance the photocurrent. By regulating the perovskite crystallization process and reducing recombination losses, we achieved a certified power conversion efficiency of 31.25% with an active area of 1.17 square centimeters.

SCIENCE (2023)

Add to Collection

Article Chemistry, Physical

Origins and influences of metallic lead in perovskite solar cells

Jiwei Liang et al.

Summary: This study reveals the origins and influences of metallic lead (Pb-0) in metal-halide perovskites, and provides a strategy for avoiding the formation of detrimental Pb-0 byproducts. This has significant implications for enhancing the performance of devices such as perovskite solar cells.

JOULE (2022)

Add to Collection

Article Multidisciplinary Sciences

Initializing film homogeneity to retard phase segregation for stable perovskite solar cells

Yang Bai et al.

Summary: The mixtures of cations and anions in hybrid halide perovskites for solar cells often undergo segregation, limiting device lifetime. By adding selenophene, the distribution of ions in the film becomes more homogeneous, resulting in improved efficiency and prolonged operational lifetime.

SCIENCE (2022)

Add to Collection

Article Multidisciplinary Sciences

Compositional texture engineering for highly stable wide-bandgap perovskite solar cells

Qi Jiang et al.

Summary: This study demonstrates the development of highly stable and efficient wide-bandgap perovskite solar cells through a combination of rapid bromine crystallization and gentle gas-quenching method. The resulting perovskite films exhibit reduced defect density and enable the realization of high efficiency and operational stability in wide-bandgap perovskite solar cells. Additionally, the integration of narrow-bandgap perovskite solar cells leads to the creation of an all-perovskite, two-terminal tandem device with high open-circuit voltage.

SCIENCE (2022)

Add to Collection

Article Multidisciplinary Sciences

Control of perovskite film crystallization and growth direction to target homogeneous monolithic structures

Daming Zheng et al.

Summary: This study investigates the preparation process of organo-metal halide perovskite films, revealing the effects of initial solution composition on film formation and the processes occurring during thermal annealing, including crystal domain evolution and grain growth mechanism. A typology is proposed to distinguish the growth direction of perovskite crystals. The findings provide guidance for the preparation of efficient perovskite light absorber thin films for solar cells.

NATURE COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Physical

A Two-Step Solution-Processed Wide-Bandgap Perovskite for Monolithic Silicon-Based Tandem Solar Cells with >27% Efficiency

Bingbing Chen et al.

Summary: A two-step sequential deposition method has been successfully applied to narrow-bandgap perovskite solar cells, resulting in improved efficiency and area for monolithic perovskite/silicon tandem solar cells, as well as for an enlarged-scaled tandem device.

ACS ENERGY LETTERS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Fully Textured, Production-Line Compatible Monolithic Perovskite/Silicon Tandem Solar Cells Approaching 29% Efficiency

Lin Mao et al.

Summary: This study develops a molecular-level nanotechnology to achieve high-performance perovskite/silicon tandem solar cells on fully textured wafer. By using a designed ultrathin hybrid hole transport layer, the cells obtain a certified efficiency of 28.84% on a 1.2 cm（2）masked area, which is the highest performance to date.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Conductive Passivator for Efficient Monolithic Perovskite/Silicon Tandem Solar Cell on Commercially Textured Silicon

Qiaojing Xu et al.

Summary: By using independent perovskite/silicon tandem solar cells on commercially textured silicon, combined with a conductive organic amine salt at the interface, the efficiency of solar cells is greatly improved.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Wide Bandgap Interface Layer Induced Stabilized Perovskite/Silicon Tandem Solar Cells with Stability over Ten Thousand Hours

Yucheng Li et al.

Summary: The perovskite/silicon tandem solar cell can break through the efficiency limitations of silicon cells by optimizing energy level alignment, achieving high efficiency and stability for long-term operation.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity

Wei Hui et al.

Summary: A new method for synthesizing stable black-phase formamidinium lead iodide (α-FAPbI(3)) was reported, which enables the stable synthesis of α-FAPbI(3) under high temperature and humidity conditions, and maintains high efficiency under light stress.

SCIENCE (2021)

Add to Collection

Article Multidisciplinary Sciences

Efficient and stable inverted perovskite solar cells with very high fill factors via incorporation of star-shaped polymer

Qi Cao et al.

Summary: This study introduces a star-shaped polymer to enhance charge transport and inhibit ion migration in perovskite solar cells, leading to improved efficiency and stability. Modified devices demonstrate significant performance enhancements and excellent long-term operational stability.

SCIENCE ADVANCES (2021)

Add to Collection

Article Chemistry, Physical

Highly Efficient Perovskite Solar Cells Enabled by Multiple Ligand Passivation

Zhifang Wu et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Energy & Fuels

Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures

Mark V. Khenkin et al.

NATURE ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Precise Control of Perovskite Crystallization Kinetics via Sequential A-Site Doping

Minchao Qin et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Quasi-Heteroface Perovskite Solar Cells

Ningyu Ren et al.

SMALL (2020)

Add to Collection

Article Energy & Fuels

Low-bandgap mixed tin-lead iodide perovskites with reduced methylammonium for simultaneous enhancement of solar cell efficiency and stability

Chongwen Li et al.

NATURE ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Gradient Annealing of Halide Perovskite Films for Improved Performance of Solar Cells

Jiahao Xi et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

In Situ Observation of Crystallization Dynamics and Grain Orientation in Sequential Deposition of Metal Halide Perovskites

Ke Meng et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Caffeine Improves the Performance and Thermal Stability of Perovskite Solar Cells

Rui Wang et al.

JOULE (2019)

Add to Collection

Article Chemistry, Physical

Fully textured monolithic perovskite/silicon tandem solar cells with 25.2% power conversion efficiency

Florent Sahli et al.

NATURE MATERIALS (2018)

Add to Collection

Article Multidisciplinary Sciences

Revealing the detailed path of sequential deposition for metal halide perovskite formation

Amita Ummadisingu et al.

SCIENCE ADVANCES (2018)

Add to Collection

Article Chemistry, Physical

Material nucleation/growth competition tuning towards highly reproducible planar perovskite solar cells with efficiency exceeding 20%

Bin Ding et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Physical

Predicting the Morphology of Perovskite Thin Films Produced by Sequential Deposition Method: A Crystal Growth Dynamics Study

Hyomin Ko et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Unveiling a Key Intermediate in Solvent Vapor Postannealing to Enlarge Crystalline Domains of Organometal Halide Perovskite Films

Shuang Xiao et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Large Grain-Based Hole-Blocking Layer-Free Planar-Type Perovskite Solar Cell with Best Efficiency of 18.20%

Haejun Yu et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Spatial Distribution of Lead Iodide and Local Passivation on Organo-Lead Halide Perovskite

Sheng Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Perspective: Understanding of ripening growth model for minimum residual PbI2 and its limitation in the planar perovskite solar cells

Se-Yun Kim et al.

APL MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Crystallization Dynamics of Organolead Halide Perovskite by Real-Time X-ray Diffraction

Tetsuhiko Miyadera et al.

NANO LETTERS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Controllable Sequential Deposition of Planar CH3NH3PbI3 Perovskite Films via Adjustable Volume Expansion

Taiyang Zhang et al.

NANO LETTERS (2015)

Add to Collection

Article Multidisciplinary Sciences

High-performance photovoltaic perovskite layers fabricated through intramolecular exchange

Woon Seok Yang et al.

SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient Perovskite Hybrid Solar Cells Through a Homogeneous High-Quality Organolead Iodide Layer

Kai Wang et al.

SMALL (2015)

Add to Collection

Article Chemistry, Physical

A Smooth CH3NH3PbI3 Film via a New Approach for Forming the PbI2 Nanostructure Together with Strategically High CH3NH3I Concentration for High Efficient Planar-Heterojunction Solar Cells

Hong Zhang et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

Thermodynamic regulation of CH3NH3PbI3 crystal growth and its effect on photovoltaic performance of perovskite solar cells

Namyoung Ahn et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Retarding the crystallization of PbI2 for highly reproducible planar-structured perovskite solar cells via sequential deposition

Yongzhen Wu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.