☆ 4.1 Article

Influence analysis of complex crack geometric parameters on mechanical properties of soft rock

INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Mixed mode fracture parameters and fracture characteristics of diorite using cracked straight through Brazilian disc specimen

Quanqi Zhu et al.

Summary: The cracked straight through Brazilian disc (CSTBD) specimen was used to investigate the I/II mixed mode static fracture of diorite in this study. The results showed that the fracture mechanical behavior and trajectories were influenced by the crack angle. Fracture energy and crack mouth opening displacement (CMOD) were characterized, and a fracture energy calculation method considering primary crack growth was proposed. The proposed EEMTSN criterion had the best prediction effect on the mixed mode fracture toughness of diorite.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2023)

Add to Collection

Review Energy & Fuels

Application and prospects of 3D printing in physical experiments of rock mass mechanics and engineering: materials, methodologies and models

Qingjia Niu et al.

Summary: The existence of joints or other kinds of discontinuities affects the stability of rock excavations and engineering. 3D printing technology has shown promise in the field of rock mass mechanics by allowing the creation of rock samples with defects. This study reviews traditional test methods and discusses the application of 3D printing technology in rock mass mechanics.

INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY (2023)

Add to Collection

Article Energy & Fuels

Integrated geochemical and statistical evaluation of the source rock potential in the deep-water, Western Basin of Ghana

Rabiatu Abubakar et al.

Summary: This study investigates the source rock potential of the Western Basin in Ghana using geochemical techniques and statistical analyses. The results show that the basin has significant production potential, mainly with kerogen type II/III, and has multiple potential hydrocarbon generation ages within the Cretaceous Period.

GEOENERGY SCIENCE AND ENGINEERING (2023)

Add to Collection

Article Engineering, Geological

Experimental Investigation into the Mechanical Behavior of Jointed Soft Rock Using Sand Powder 3D Printing

Yang Zhao et al.

Summary: The presence of joints and other types of discontinuities significantly affects the mechanical behavior of rock, which in turn influences the stability of rock excavations. This study utilizes 3D printing to investigate the mechanical behavior of jointed rock. Synthetic specimens made from sand powder are tested in the laboratory to simulate soft rock. The effects of joint parameters on the mechanical behaviors and failure patterns are quantitatively analyzed, with the dip angle found to have the strongest influence. The applicability of sand powder 3D printing for simulating soft rock mechanical behavior is demonstrated, with potential for further applications in rock mechanics.

ROCK MECHANICS AND ROCK ENGINEERING (2023)

Add to Collection

Article Chemistry, Physical

The Influence of the Strain Rate and Prestatic Stress on the Dynamic Mechanical Properties of Sandstone-A Case Study from China

Jun Wang et al.

Summary: A series of tests were conducted to investigate the dynamic mechanical behavior and fracture characteristics of medium siltstone. The dynamic uniaxial strength was found to be rate-dependent, while the dynamic elastic modulus was not dependent on the strain rate. A generalized model was proposed to describe the rate-dependent strength. Microscopic differences in the post-loading microcrack characteristics were identified between two morphological types observed in the tests. Type I behavior was dominated by intergranular fracture, while Type II behavior resulted from the combination of intergranular and transgranular fracture.

MATERIALS (2023)

Add to Collection

Article Multidisciplinary Sciences

Super-resolution of X-ray CT images of rock samples by sparse representation: applications to the complex texture of serpentinite

Toshiaki Omori et al.

Summary: X-ray computed tomography (X-ray CT) is widely used in the earth sciences to provide three-dimensional structures of rocks and sediments. However, extracting information on multi-scale structures is challenging due to limitations of sample size and scanning time. In this study, we applied the super-resolution technique to X-ray CT images of rock core samples and successfully reconstructed high-resolution images of grain shapes, veins, and background heterogeneities. This technique shows potential effectiveness for feature extraction of complex rock textures.

SCIENTIFIC REPORTS (2023)

Add to Collection

Article Mechanics

Dynamic shear fracture behavior of rocks: insights from three-dimensional digital image correlation technique

Chenxi Zhang et al.

Summary: The influence of loading rate on the mode I fracture property of rocks has been extensively studied, but the rate-effect of dynamic mode II fracture is rarely reported. This study conducted a series of dynamic mode II fracture tests under a wide range of loading rates using the modified split Hopkinson pressure bar (SHPB) system. The results showed that the dynamic mode II fracture toughness increases with loading rate, and the fracture processes can be divided into multiple stages.

ENGINEERING FRACTURE MECHANICS (2023)

Add to Collection

Article Engineering, Geological

Cyclic triaxial test investigation on tuffs with different water content at Badantoru Hydropower Station in Indonesia

Xudong Chen et al.

Summary: This study investigates the weakening effect of water on the mechanical properties and failure modes of a Hydropower station's bedrock. By conducting static and cyclic triaxial compressive tests on dry, natural, and saturated tuffs, the researchers found that increasing water content leads to a decrease in peak stress, residual stress, and elastic modulus, while increasing confining pressure results in an increase in peak stress, peak strain, and elastic modulus.

ENGINEERING GEOLOGY (2022)

Add to Collection

Article Geosciences, Multidisciplinary

Sampling interval-size effects and differential sensitivities of different morphology parameters of rock joint

Xunhui Xu et al.

Summary: The study analyzed the variation of rock-joint morphology characteristics under different sampling intervals and window sizes using the progressive coverage method and five morphology parameters. The results showed that larger sampling windows generally led to more stable values of the morphology parameters, while R-p, theta(max)*/(C+1)(2D) and M were more sensitive to the sampling spacing effect under small sampling intervals. The study also discussed the interaction between the sampling interval effect and the sampling size effect, as well as the correlation between joint roughness and the sensitivity of the morphology parameters.

JOURNAL OF STRUCTURAL GEOLOGY (2022)

Add to Collection

Article Engineering, Geological

Correlation Between the Constant mi of Hoek-Brown Criterion and Porosity of Intact Rock

Mingming He et al.

Summary: The study proposes a new model to investigate the relationship between porosity and rock strength ratios, modifying the Hoek-Brown criterion to incorporate porosity instead of constants m(i) and s. Various rock tests show that the modified criterion effectively represents the impact of porosity on rock failure envelopes and can be used to estimate rock porosity and strength parameters.

ROCK MECHANICS AND ROCK ENGINEERING (2022)

Add to Collection

Article Engineering, Geological

Soft Computing-Based Models for Predicting the Characteristic Impedance of Igneous Rock from Their Physico-mechanical Properties

Adeyemi Emman Aladejare et al.

Summary: This study proposed two soft computing models (ANN and ANFIS) for better predictions of characteristic impedance of igneous rocks, and compared them with multiple linear regression (MLR) model. The results showed that the ANN and ANFIS models had better prediction performance and could be used to predict the characteristic impedance of igneous rocks.

ROCK MECHANICS AND ROCK ENGINEERING (2022)

Add to Collection

Article Engineering, Geological

Thermal effects on fracture toughness of cracked straight-through Brazilian disk green sandstone and granite

Lei Zhou et al.

Summary: This study investigated the evolution laws of physical and fracture properties of different rock materials under high-temperature geological conditions. The results showed that the fracture characteristics of the rock materials changed from brittle fracture to plasticity fracture with increasing temperature, and the fracture toughness decreased. The study also observed changes in fracture morphologies with increasing temperature.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2022)

Add to Collection

Article Geochemistry & Geophysics

Numerical Analysis on the Joint Weakening Effect of Rock Mass Behaviors in Tension

Yang Zhao et al.

Summary: The presence of joints and other types of discontinuities significantly affects the mechanical properties of rock, especially tensile properties. This study used a particle flow model to investigate the relationship between joint geometric parameters and tensile mechanical properties. The results showed that the joint angle played the most important role in affecting the tensile strength, followed by joint length, density, and aperture.

LITHOSPHERE (2022)

Add to Collection

Article Engineering, Geological

Research on interactions among parameters affecting dynamic mechanical properties of sandstone after freeze-thaw cycles

Ruifeng Zhao et al.

Summary: This study investigates the interactions among parameters affecting the dynamic strength of sandstone after freeze-thaw cycles from a system perspective. The improved Mahalanobis SOM algorithm and coding method based on Pearson correlation coefficient are used to analyze the interactions and effects on the dynamic mechanical properties of the sandstone. The results reveal the dominant factors and intensity of interactions, providing insights into the deterioration mechanism of sandstone after freeze-thaw cycles.

ENGINEERING GEOLOGY (2021)

Add to Collection

Article Engineering, Environmental

Estimation of the appropriate sampling interval for rock joints roughness using laser scanning

Yunfeng Ge et al.

Summary: The study found that the relationship between sampling interval and roughness coefficient follows a power distribution, with the appropriate sampling interval increasing with sampling size and showing a negative correlation with roughness level.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Study on the Physical Properties and Joint Evolution Characteristics of Three-Dimensional Reconstructed Coal

Yongning Wu et al.

Summary: The study shows that the size and area of joints inside the coal body are closely related to the compressive strength of the coal sample, and increasing the joint size and area can increase the ductility and multipeak phenomenon of the stress-strain curve of the coal sample.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2021)

Add to Collection

Article Energy & Fuels

Experimental and numerical study of coal-rock bimaterial composite bodies under triaxial compression

Yulong Chen et al.

Summary: This study focuses on the mechanical behavior of coal-rock bimaterial composite structures under triaxial compression, finding that the mechanical parameters of rock-coal-rock composites are superior to other combinations. After compression failure, the primary fracture of coal-rock composite bodies occurs within the coal, and increasing confining pressure can reduce burst proneness.

INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Investigation on the relationship between CT numbers and marble failure under different confining pressures

Yang Yan-Shuang et al.

Summary: CT scanning technology was used to investigate marble specimens under different confining pressures, revealing statistical regularity in the CT numbers with increasing confining pressure. The conventional triaxial tests showed higher average CT numbers compared to graded loading tests, while the variances were lower. Damage variables of the rock specimens decreased with increasing confining pressure, and were higher in graded loading tests compared to conventional triaxial tests.

REVIEWS ON ADVANCED MATERIALS SCIENCE (2021)

Add to Collection

Article Energy & Fuels

Relationship between rock uniaxial compressive strength and digital core drilling parameters and its forecast method

Hongke Gao et al.

Summary: The article proposes a new method of predicting rock uniaxial compressive strength (UCS) using digital core drilling, establishing a relationship model between digital core drilling parameters and rock UCS through experiments and mechanical analysis, providing a theoretical basis for support designs in underground engineering.

INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Energy & Fuels

Prediction and analysis of net ecosystem carbon exchange based on gradient boosting regression and random forest

Jianchao Cai et al.

APPLIED ENERGY (2020)

Add to Collection

Article Engineering, Geological

Geometrical heterogeneity of the joint roughness coefficient revealed by 3D laser scanning

Han Bao et al.

ENGINEERING GEOLOGY (2020)

Add to Collection

Article Engineering, Civil

Numerical Study of Anisotropic Weakening Mechanism and Degree of Non-Persistent Open Joint Set on Rock Strength with Particle Flow Code

Jie Cui et al.

KSCE JOURNAL OF CIVIL ENGINEERING (2020)

Add to Collection

Article Acoustics

Acoustic Emission Response Characteristics of Anthracitic Coal under Uniaxial Compression

Haiyan Wang et al.

SHOCK AND VIBRATION (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Impact of the initial crack volume on the intact behavior of a bonded particle model

Shantanu Patel et al.

COMPUTERS AND GEOTECHNICS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Energy distribution and fractal characterization of acoustic emission (AE) during coal deformation and fracturing

Shumin Liu et al.

MEASUREMENT (2019)

Add to Collection

Article Engineering, Geological

Effect of Fracture Heterogeneity on Rock Mass Stability in a Highly Heterogeneous Underground Roadway

Peng Kong et al.

ROCK MECHANICS AND ROCK ENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

Comparison of Achievable Contrast Features in Computed Tomography Observing the Growth of a 4H-SiC Bulk Crystal

Michael Salamon et al.

MATERIALS (2019)

Add to Collection

Article Engineering, Geological

Dynamic Mechanical Properties and Fracturing Behavior of Marble Specimens Containing Single and Double Flaws in SHPB Tests

Diyuan Li et al.

ROCK MECHANICS AND ROCK ENGINEERING (2019)

Add to Collection

Article Environmental Sciences

Different bedding loaded coal mechanics properties and acoustic emission

Jiajia Liu et al.

ENVIRONMENTAL EARTH SCIENCES (2018)

Add to Collection

Article Energy & Fuels

Evaluation of gas resource potentiality, geochemical and mineralogical characteristics of Permian shale beds of Latehar-Auranga Coalfield, India

Vinod Atmaram Mendhe et al.

INTERNATIONAL JOURNAL OF COAL GEOLOGY (2018)

Add to Collection

Article Mining & Mineral Processing

Computing the damage and fracture energy in a coal mass based on joint density

Faham Tahmasebinia et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Engineering, Geological

Effects of strain rate on fracture toughness and energy release rate of gas shales

Bankim Mahanta et al.

ENGINEERING GEOLOGY (2017)

Add to Collection

Article Engineering, Geological

Mechanical Behavior of Brittle Rock-Like Specimens with Pre-existing Fissures Under Uniaxial Loading: Experimental Studies and Particle Mechanics Approach

Ri-hong Cao et al.

ROCK MECHANICS AND ROCK ENGINEERING (2016)

Add to Collection

Article Engineering, Geological

Influence of fracture-induced weakening on coal mine gateroad stability

Lishuai Jiang et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2016)

Add to Collection

Article Multidisciplinary Sciences

Giant photostriction in organic-inorganic lead halide perovskites

Yang Zhou et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Article Energy & Fuels

Uniaxial and triaxial single and multistage creep tests on coal-measure shale rocks

Brijes Mishra et al.

INTERNATIONAL JOURNAL OF COAL GEOLOGY (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical simulation of intergranular and transgranular crack propagation in ferroelectric polycrystals

Amir Abdollahi et al.

INTERNATIONAL JOURNAL OF FRACTURE (2012)

Add to Collection

Article Mechanics

Geometry and size effects on fracture trajectory in a limestone rock under mixed mode loading

M. R. M. Aliha et al.

ENGINEERING FRACTURE MECHANICS (2010)

Add to Collection

Article Engineering, Geological

Systematic evaluation of cracking behavior in specimens containing single flaws under uniaxial compression

L. N. Y. Wong et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2009)

Add to Collection

Article Engineering, Geological

Coalescence of multiple flaws in a rock-model material in uniaxial compression

M Sagong et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.