Related references
Note: Only part of the references are listed.
Article
Engineering, Mechanical
J. Wang et al.
Summary: This study investigates the use of elastic materials, including foam rubber damping pads and polyurethane foam boards, to improve the impact sound insulation performance of floating floors. The performance parameters of the damping pads and foam boards were tested and analyzed under different loading conditions. It was found that the thickness of the polyurethane foam board is greater than that of the foam rubber damping pad, and the sound insulation and damping performance of the polyurethane foam board are lower than that of the foam rubber damping pad. Increasing the thickness of the floating plate leads to a deterioration in the sound insulation performance of the structure made of polyurethane foam board and foam rubber damping pad. This study provides a foundational reference for the sound insulation of floating floors using foam rubber damping pads or polyurethane foam boards as elastic damping cushions.
EXPERIMENTAL TECHNIQUES
(2023)
Article
Forestry
Chun-Won Kang et al.
Summary: This study investigated the effects of surface perforation on the drying characteristics and sound absorption coefficients of Russian Simon poplar lumber. The results showed that perforated wood had a lower moisture content and a different drying stress compared to control samples. The sound absorption coefficient of the perforated samples was significantly improved, particularly at 1000 Hz, and adding air gaps in the back cavity further enhanced the sound absorption performance.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS
(2023)
Article
Construction & Building Technology
Chun-Won Kang et al.
Summary: This study examines the impact of floorboard installation on changes in impact sound in a wooden building. The results show that installing floorboards can reduce lightweight impact sound by about 8.6 dB.
JOURNAL OF BUILDING ENGINEERING
(2023)
Article
Engineering, Industrial
Jeewon Choi et al.
Summary: The study found that hardwood flooring has a significant impact on infants' crawling, leading to a lower crawling rate and longer duration of hand-floor contact.
APPLIED ERGONOMICS
(2022)
Article
Chemistry, Applied
Haradhan Kolya et al.
Summary: This research aimed to study the efficacy of oxidation in wood cell walls by ammonium persulfate solution and its effects on sound absorption coefficients and gas permeability in Oak wood. The oxidation treatment changed the chemical compositions of wood, boosting wood porosity and gas permeability. It significantly improved the average sound absorption coefficient at different frequency ranges and could be helpful for research and production of wood-based sound absorption materials to manage the acoustic housing environment.
CARBOHYDRATE POLYMERS
(2022)
Article
Environmental Sciences
Maya Negev et al.
Summary: The review of literature and regulations revealed potential health risks associated with synthetic surface materials containing toxic chemicals. Testing results showed that a majority of synthetic playground and grass surfaces exceeded relevant standards for trace metals, indicating potential risks of exposure for children.
JOURNAL OF EXPOSURE SCIENCE AND ENVIRONMENTAL EPIDEMIOLOGY
(2022)
Article
Forestry
Sidong Wang et al.
Summary: This study evaluated the physical and mechanical properties of plantation Japanese larch wood by measuring various indicators with reference to Chinese national standards. The results showed that growth ring characteristics and latewood percentage were related to the wood's physical and mechanical properties. Growth ring width was found to be the most suitable for evaluating MOE and MOR, while latewood percentage was suitable for evaluating air-dry density, radial air-dry shrinkage, IBS and UTS. RW can be used to differentiate juvenile wood and mature wood.
Article
Green & Sustainable Science & Technology
Yong-Hee Kim
Summary: This study investigates the effects of multi-perforated gypsum boards on floor impact noises through experiments conducted in a test building and an actual apartment building. The results show that multi-perforated gypsum boards can significantly reduce heavy-weight impact noises, with varying degrees of reduction at different frequencies. In situ investigations also confirm the effectiveness of installing multi-perforated gypsum boards in reducing heavy-weight impact noises.
Article
Agronomy
Manuel Ferrandez-Villena et al.
Summary: The aim of this study was to determine the acoustic and thermal properties of particleboards made from mulberry wood pruning waste using urea formaldehyde resin (UF) as a binder. The results showed that these particleboards had low thermal conductivity and good sound absorption properties, and the mechanical performance also met the requirements. The particle size of the particleboards was the key factor affecting the acoustic properties.
Article
Construction & Building Technology
Kurt Eggenschwiler et al.
Summary: This study investigates the effects of facade surface material and building rotation on perceived noise annoyance in laboratory experiments. The results show that absorbing facades are associated with lower noise annoyance than reflecting or diffusing facades, but at the same noise level, absorbing facades are perceived as more annoying. Building rotation is associated with lower noise annoyance.
BUILDING AND ENVIRONMENT
(2022)
Article
Economics
Timo Hener
Summary: This study reveals how exposure to noise pollution increases violent crime. By using the daily variation in aircraft landing approaches, the researcher measures the noise levels and finds that a 4.1 decibel increase in background noise leads to a 6.6% increase in the violent crime rate. The additional crimes mostly involve physical assaults on men. These findings indicate that noise pollution has a substantial societal burden beyond its health impacts.
JOURNAL OF PUBLIC ECONOMICS
(2022)
Article
Chemistry, Multidisciplinary
Nikolaos-Georgios Vardaxis et al.
Summary: This study finds that multilayered CLT floors can significantly improve sound insulation in terms of airborne sound and impact sound. By increasing total mass and thickness and adding layers such as elastic mats, insulation, gypsum boards, plywood, concrete screed, and wooden parquet floors, the acoustic performance can be enhanced. Dry floor solutions (concrete screed) and wooden parquet floors are particularly effective in floating floor configurations.
APPLIED SCIENCES-BASEL
(2022)
Article
Public, Environmental & Occupational Health
Tsuyoshi Tatemoto et al.
Summary: This study aimed to investigate the performance of a shock-absorbing floor material with a mechanical metamaterial structure (MM-flooring) and its impact on the gait and balance of older adults. The results showed that MM-flooring has sufficient shock-absorbing performance to reduce the risk of fractures in older people when they fall. Additionally, it does not affect the gait or balance of older adults.
Article
Materials Science, Paper & Wood
Sang-Sik Jang et al.
Summary: This study measured and compared the modulus of elasticity, modulus of rupture, and allowable bending stress of small and large-diameter larch as well as large diameter Douglas fir timber according to ASTM standards. Results showed that large-diameter Douglas fir timber exhibited the highest modulus of elasticity values, while small-diameter larch had a higher allowable bending stress.
INTERNATIONAL WOOD PRODUCTS JOURNAL
(2021)
Article
Acoustics
Yi Yang et al.
Summary: This study presents an analysis of the vibroacoustic characteristics of Cross-Laminated Timber (CLT) panels using a Wave and Finite Element (WFE) method. Two WFE modelling approaches are investigated, and results are compared to a thin, orthotropic plate model. The study shows that different modelling approaches predict varying sound transmission loss at high frequencies, with a complex vibroacoustic behaviour observed in the panel at high frequencies.
JOURNAL OF SOUND AND VIBRATION
(2021)
Article
Acoustics
Jesse Lietzen et al.
Summary: Experimental study of impact force excitation on wooden floors revealed significant differences in force spectra at frequencies above 500 Hz, with variations in driving force corresponding to a level difference of over 3 dB in the low-frequency range. The excitation process was found not to be transient, and vibration of the measured wooden floors did not appear to affect the impact force. These findings are crucial for the development of mathematical tools to predict impact sound insulation of wooden floors.
Article
Materials Science, Paper & Wood
Haradhan Kolya et al.
Summary: Steam explosion treatment significantly increases the air permeability and sound absorption capability of palmwood, mainly due to changes in the cell wall. The color change, air permeability, and sound absorption coefficient are correlated, indicating that low-pressure steam explosion is an effective technique to improve the acoustic properties of wood.
Article
Green & Sustainable Science & Technology
Christina Makoundou et al.
Summary: The specific needs of cyclists, pedestrians, and elderly people in urban road infrastructures are often overlooked, but the development of rubber-based impact-absorbing pavements has the potential to address this issue and improve safety for vulnerable road users.
Article
Materials Science, Paper & Wood
Seong Hyun Kim et al.
Summary: The study compared the wood quality of Dahurian larch and Japanese larch in Korea, showing that Dahurian larch had superior properties in terms of density, shrinkage, compression strength in heartwood, young’s modulus in compression, etc. These results can be used as quality indices for both wood species.
Article
Chemistry, Multidisciplinary
Federica Bettarello et al.
Summary: The increased use of timber constructions, particularly Cross Laminated Timber floors in multi-story buildings, is driven by standardization processes, product testing, and eco-sustainability advantages. However, further research is needed to investigate sound insulation properties for indoor comfort and compliance with building regulations. Field measurements on CLT floors show varying noise reduction effects based on different layering and sources, with no available analytical model accurately predicting acoustic performances.
APPLIED SCIENCES-BASEL
(2021)
Article
Acoustics
Haradhan Kolya et al.
Article
Construction & Building Technology
Marco Caniato et al.
BUILDING AND ENVIRONMENT
(2017)
Article
Acoustics
Andreia Pereira et al.
Article
Construction & Building Technology
Seung Yup Yoo et al.
BUILDING AND ENVIRONMENT
(2014)
Article
Construction & Building Technology
Jan Weckendorf et al.
JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES
(2014)
Article
Acoustics
Alessandro Schiavi et al.
Article
Materials Science, Composites
J. Zhao et al.
COMPOSITES SCIENCE AND TECHNOLOGY
(2010)
Article
Acoustics
A. Dijckmans et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA
(2010)
Article
Construction & Building Technology
Kyoung-Woo Kim et al.
BUILDING AND ENVIRONMENT
(2009)