☆ 4.8 Article

Synthesis and fabrication of segregative and durable MnO2@chitosan composite aerogel beads for uranium(VI) removal from wastewater

WATER RESEARCH (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Flexible self-supporting Na3MnTi(PO4)3@C fibers for uranium extraction from seawater by electro sorption

Yuliang Chen et al.

Summary: In this study, a flexible self-supporting nanofiber electrode material NMTP@C was designed and prepared, which demonstrated efficient capture of uranium ions. The nanofiber has abundant active sites and fast charge/ion transport capability, allowing for rapid removal of U(VI) in seawater.

JOURNAL OF HAZARDOUS MATERIALS (2024)

Add to Collection

Article Chemistry, Physical

Spectroscopic and modeling investigation of U(VI) removal mechanism on nanoscale zero-valent iron/clay composites

Zengqiang Ci et al.

Summary: This study demonstrated the removal mechanism of U(VI) on nZVI/clay composites through batch experiments, XPS analysis, and surface complexation modeling. The findings include the adsorption capacity, reduction process, and surface complexation reaction of U(VI) on nZVI/clay composites. These findings are crucial for the highly efficient removal of radionuclides in actual environmental remediation.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Add to Collection

Article Environmental Sciences

Three-dimension titanium phosphate aerogel for selective removal of radioactive strontium(II) from contaminated waters

Yiguo Meng et al.

Summary: In this study, a novel TiP aerogel was developed for the selective removal of Sr(II) from radioactive wastewater. The TiP aerogel demonstrated high efficiency and selectivity, with a distribution coefficient of up to 4740.03 mL/g. It exhibited rapid adsorption kinetics and a maximum adsorption capacity of 373.6 mg/g at pH 5. The TiP aerogel also showed over 80% removal for 50 mg/L Sr2+ in real water systems. The results indicate that TiP aerogel is a promising adsorbent for the effective and selective capture of Sr(II) from radioactive wastewater.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2023)

Add to Collection

Article Engineering, Environmental

Hydrophilic imprinted MnO2 nanowires coating membrane with ultrahigh adsorption capacity for highly selective separation of Artemisinin/Artemether

Minjia Meng et al.

Summary: In this study, a hydrophilic ART molecularly imprinted MnO2 nanowires coating membrane (MINM) was fabricated by vacuum filtration of imprinted MnO2 nanowires and graphene oxide nanosheets on the PVDF membrane surface. The MINM showed ultrahigh ART adsorption capacity and selectivity, with the ART adsorption amount of 335 mg g(-1) at 5 min using a dynamic cross-flow separation system, which was 12.18 times higher than that of ARE and had a separation factor (a) value of 12.39.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Chemistry, Applied

Enhanced performance in uranium extraction by the synergistic effect of functional groups on chitosan-based adsorbent

Qi Xin et al.

Summary: In this study, a novel adsorbent SPCCHC was prepared and showed good adsorption selectivity for U(VI). The introduction of phosphate group greatly improved the adsorption effect on uranium and SPCCHC exhibited good recycling performance.

CARBOHYDRATE POLYMERS (2023)

Add to Collection

Article Biochemistry & Molecular Biology

Phosphorylation improved the competitive U/V adsorption on chitosan-based adsorbent containing amidoxime for rapid uranium extraction from seawater

Jiali Gan et al.

Summary: A chitosan-based porous composite adsorbent was prepared with phosphoric acid, amidoxime, and quaternary ammonium groups to enhance the adsorption rate and competitive uranium-vanadium adsorption. PACNC exhibited a maximum uranium adsorption capacity of 962.226 mg g-1 at 308 K and pH = 7, with an adsorption rate constant 2.38 times higher than that of ACNC. The adsorption equilibrium time was reduced to 50 minutes with PACNC compared to 300 minutes with ACNC. PACNC also showed excellent recycling performance and maintained stable adsorption capacity after five cycles. The results suggest that phosphorylation improves the competitive adsorption of uranium-vanadium and uranium adsorption rate.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2023)

Add to Collection

Article Biochemistry & Molecular Biology

High strength chitin/chitosan-based aerogel with 3D hierarchically macro-meso-microporous structure for high-efficiency adsorption of Cu(II) ions and Congo red

Jie Kuang et al.

Summary: A high-strength aerogel with a 3D hierarchically macro-meso-microporous structure (HPS-aerogel) was designed using biological macromolecules of chitin and chitosan. It showed high porosity, good mechanical properties, and excellent compression strength. The HPS-aerogel was also used as an adsorbent for the simultaneous removal of Cu(II) and Congo red from water, exhibiting promising adsorption capabilities.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2023)

Add to Collection

Article Environmental Sciences

Silica-supported thiourea resin for efficient recovery of Pd(II): Batch, column and mechanism study

Zhenxiong Ye et al.

Journal of Cleaner Production (2023)

Add to Collection

Article Environmental Sciences

An ultralight and flexible nanofibrillated cellulose/chitosan aerogel for efficient chromium removal: Adsorption-reduction process and mechanism

Qinyu Wang et al.

Summary: Heavy metals, especially the anionic heavy metal chromium, pose a significant threat to global water resources and human health. In this study, an ultralight nanofibrillated cellulose/chitosan aerogel was developed for efficient removal of both Cr(VI) and Cr(III). The aerogel exhibited high adsorption capacity, excellent selectivity, and mechanical integrity. Additionally, it showed regeneration capability and promising application prospects for alleviating heavy metal pollution in agriculture.

CHEMOSPHERE (2023)

Add to Collection

Article Environmental Sciences

Adsorption of uranium by chitosan/Chlorella pyrenoidosa composite adsorbent bearing phosphate ligand

Wenjie Liu et al.

Summary: A novel chitosan/Chlorella pyrenoidosa composite adsorbent bearing phosphate ligand (CSP/ CP) was designed and synthesized in this study, showing high uranium adsorption capacity and excellent selectivity for uranium. The mechanism analysis revealed that CSP/CP has active sites for high-performance uranium adsorption, and it can be recycled more than five times through desorption with 0.1 M Na2CO3 + 2% H2O2 at 318 K, providing a new scientific basis for the preparation of high selectivity composite adsorbent by chitosan.

CHEMOSPHERE (2022)

Add to Collection

Article Engineering, Environmental

Fabrication and investigation of novel monochloroacetic acid fortified, tripolyphosphate-crosslinked chitosan for highly efficient adsorption of uranyl ions from radioactive effluents

Meng Xia et al.

Summary: Chitosan crosslinked with potassium tripolyphosphate (CTPP) and monochlomacetic-acid-modified chitosan crosslinked with potassium tripolyphosphate (MCTPP) were synthesized for efficient removal of UO22+ from acidic radioactive effluents. The adsorption process was influenced by factors such as pH and adsorbent dose, and the adsorption mechanism was found to be an endothermic single-layer process. The synthesized composites showed high adsorption capacities for UO22+ and were minimally affected by common metal ions.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection

Article Engineering, Chemical

Preparation of amidoxime modified imidazole copolymers and the efficient extraction of U(VI) from the alkaline aqueous solution

Fan Wang et al.

Summary: With the development of nuclear power, extracting uranium from seawater has become a grand task due to the depletion of uranium resources on land. Synthesis of highly efficient and selective adsorbents is crucial for this task. The adsorption of U(VI) by the copolymers strongly depended on ionic strength and pH, fitting well with pseudo-second-order model and Langmuir model. Possible binding mechanisms involved uranyl with oxime O and amino nitrogen by bidentate coordination model or through bidentate coordination of oxime O, amino N and imidazole N.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Engineering, Environmental

Mechanically robust and multifunctional polyimide/MXene composite aerogel for smart fire protection

Changcheng Jiang et al.

Summary: A multifunctional smart fire-protection aerogel with temperature-sensing and fire-warning capabilities has been fabricated. The aerogel showed sensitive temperature-sensing capability and could trigger the fire-warning system within 5 seconds when burned. It also exhibited excellent flame retardancy, thermal insulation, thermostability, and durable piezoresistive sensing.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Multifunctional chitosan non-woven fabrics modified with terylene carbon dots for selective detection and efficient adsorption of Cr(VI)

Tianwu Hu et al.

Summary: A novel terylene carbon dots were synthesized and modified onto chitosan non-woven fabrics for selective detection and removal of Cr(VI). The modified fabrics exhibited higher selectivity and lower detection limit, and maintained a high removal rate even after multiple recirculations. The adsorption process followed the Langmuir model with a high fitting correlation.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Review Environmental Sciences

Remediation techniques for uranium removal from polluted environment-Review on methods, mechanism and toxicology

S. Akash et al.

Summary: Uranium, a radioactive and chemically toxic element, poses a major threat to the ecosystem. However, bioremediation methods that utilize microbes and plants to transform uranium into a less toxic form have proven to be effective in eliminating its hazards.

ENVIRONMENTAL POLLUTION (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Selective biosorption of U(VI) from aqueous solution by ion-imprinted honeycomb-like chitosan/kaolin clay composite foams

Hailan Yu et al.

Summary: This study successfully fabricated ion-imprinted honeycomb-like chitosan/kaolin clay composite foams and demonstrated their potential for selective biosorption of U(VI). The ion-imprinted sorbent showed higher sorption capacity and selectivity compared to the non-imprinted sorbent, thanks to its ability to smartly recognize the target ions. This research provides a potential solution for the separation of U(VI) from radioactive wastewater.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Add to Collection

Article Chemistry, Physical

Layered ammonium vanadate nanobelt as efficient adsorbents for removal of Sr2+and Cs+ from contaminated water

Heng Zhang et al.

Summary: In this study, a layered ammonium vanadate nanobelt adsorbent was synthesized and used to remove Sr2+ and Cs+ from water. The main adsorption mechanism was ion exchange, and the adsorption capacity varied with pH. The adsorption kinetics and isotherms data followed the pseudo-second-order kinetic model and Langmuir model, respectively.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Environmental Sciences

Highly-efficient and easy separation of γ-Fe2O3 selectively adsorbs U(VI) in waters

Minhua Su et al.

Summary: This study investigated the interaction between U (VI) ions and maghemite particles, and found that maghemite showed excellent selectivity for U (VI) removal, with organic matter promoting the interfacial interaction under acidic conditions.

ENVIRONMENTAL RESEARCH (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Ultrahigh efficient and selective adsorption of U(VI) with amino acids-modified magnetic chitosan biosorbents: Performance and mechanism

Yan Li et al.

Summary: In this study, amino acids-modified magnetic chitosan adsorbents were successfully used for the removal of uranium from wastewater, showing high adsorption capacity and efficient solid-liquid separation.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Add to Collection

Article Engineering, Environmental

3D printing calcium alginate adsorbents for highly efficient recovery of U (VI) in acidic conditions

Song Fuxiang et al.

Summary: In this study, a 3D porous calcium alginate scaffold was successfully constructed using 3D printing and calcium ion cross-linking. The scaffold showed excellent structural stability and high U(VI) adsorption capacity under acidic conditions. It could be used for the removal and recycling of U(VI) from acidic solutions.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection

Review Engineering, Environmental

Advanced MOFs@aerogel composites: Construction and application towards environmental remediation

Haihao Peng et al.

Summary: The combination of MOFs with aerogels shows promise for environmental remediation, optimizing performance and enhancing practicality.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection

Article Engineering, Chemical

Compressible amino-modified carboxymethyl chitosan aerogel for efficient Cu(II) adsorption from wastewater

Qinyu Wang et al.

Summary: An elastic polyethyleneimine-modified carboxymethyl chitosan aerogel was developed for the adsorption of Cu(II) in water, showing excellent adsorption performance and selectivity. The aerogel also demonstrated effective purification of industrial wastewater in a fixed-bed column filtration system. The strong electrostatic force, Vander Waals' force, and coordination of functional groups were found to contribute to the exceptional adsorption performance.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Engineering, Chemical

Adsorption behavior and mechanism of U(VI) onto phytic Acid-modified Biochar/MoS2 heterojunction materials

Yanbing Sun et al.

Summary: Using low-cost, pollution-free, and efficient adsorbents to remove uranium from radioactive wastewater is important for environmental protection. In this study, bamboo powder-derived biomass charcoal (BDC) was composited with MoS2 and surface-modified with phytic acid to obtain BDC/MoS2-PO4 composite. The adsorption performance of the composite was enhanced after H-2 plasma treatment. This study provides a theoretical and experimental basis for the design and synthesis of biochar-based materials and contributes to radioactive wastewater treatment.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Engineering, Manufacturing

Lightweight and mechanically robust carbon aerogel/SnO2 nanorods composites with heterogeneous structure for electromagnetic interference shielding

Hui Zhao et al.

Summary: This study successfully fabricated lightweight and mechanically robust carbon aerogel (CA)/tin dioxide (SnO2) nanorod composites with excellent electromagnetic interference (EMI) shielding performance, mechanical properties, flame retardant properties, and thermal insulation properties.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Polyethyleneimine incorporated chitosan/a-MnO2 nanorod honeycomb-like composite foams with remarkable elasticity and ultralight property for the effective removal of U(VI) from aqueous solution

Xianqian Ao et al.

Summary: The development of new adsorbents is crucial for addressing the environmental challenges of radioactive wastewater treatment. In this study, a novel polyethyleneimine incorporated chitosan/alpha-MnO2 nanorod honeycomb-like composite foam (PCM) with remarkable elasticity and ultralight property was synthesized for U(VI) removal. PCM-40 showed the highest sorption capacity for U(VI) due to its well-developed macroporous structure and high content of amine/imine groups. The kinetics followed a pseudo-second-order model, indicating chemisorption as the rate-controlling step. The isotherms were well described by the Langmuir model, suggesting mono-layer homogeneous sorption of U(VI). The maximum sorption capacity of PCM-40 for U(VI) reached up to 301.9 mg/g at pH 4.5 and 298 K. The thermodynamic parameters indicated the spontaneous and endothermic nature of the adsorption process. The main sorption mechanism was attributed to the complexation of uranyl ions with the amine/imine and hydroxyl groups. The high sorption capacity, fast kinetics, and relatively good selectivity make PCM-40 a promising candidate for radioactive pollution cleanup.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Add to Collection

Article Chemistry, Physical

Chitosan-based aerogel with anti-swelling for U(VI) adsorption from aqueous solution

Lirong Yang et al.

Summary: The novel hierarchical porous chitosan-based aerogel CS-PTADMAs shows anti-swelling properties and high U(VI) adsorption capacity, with adsorption behavior coordinated with the pseudo-second-order kinetic model and Freundlich isothermal model. The findings are crucial for the practical development of uranium adsorbents.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Add to Collection

Article Engineering, Environmental

Continuous and controllable synthesis of MnO2/PPy composites with core-shell structures for supercapacitors

Yang Song et al.

Summary: A slug-based microreactor system was utilized to integrate the redox reaction between KMnO4 and MnSO4 with the chemical oxidative polymerization of pyrrole, resulting in the preparation of MnO2/PPy composite with a typical core-shell structure. The morphology of the composite material was significantly influenced by the molar ratio and residence time, showing a competition between pyrrole polymerization and MnO2 crystallization. The electrochemical performance of the core-shell composite material was enhanced, demonstrating the synergistic effect between MnO2 and PPy.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Review Environmental Sciences

Research progress of adsorption and removal of heavy metals by chitosan and its derivatives: A review

Yuzhe Zhang et al.

Summary: Chitosan has great potential as an adsorbent for pollutants, but its application is limited by factors such as pH sensitivity, low thermal stability, and weak mechanical strength. Modifying the functional groups of chitosan can improve its performance.

CHEMOSPHERE (2021)

Add to Collection

Review Engineering, Environmental

Chitosan modifications for adsorption of pollutants-A review

Ismaila Olalekan Saheed et al.

Summary: Modification of chitosan through methods such as grafting and cross-linking is a promising approach for removing organic and inorganic pollutants from aqueous medium. The performance of modified chitosan for adsorption of pollutants depends largely on the modification method adopted, materials used, and adsorption experimental conditions. Cross-linking is commonly used for improving the stability of chitosan, although it may decrease adsorption capacity, but recent works have shown enhancement through grafting or incorporation of solid adsorbents before cross-linking.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Highly efficient removal of U(VI) by a novel biochar supported with FeS nanoparticles and chitosan composites

Guohe Chen et al.

Summary: The new biochar supported with FeS nanoparticles and chitosan composites shows high efficiency in removing U(VI) ions, with superior adsorption performance attributed to functional groups on its surface, reaction between FeS nanoparticles and U(VI), and the stabilizing effect of chitosan. The suggested reaction mechanism includes electrostatic attractive, surface complexation, chemical precipitation, and reductive reaction. Additionally, the biochar is chemically stable and environmentally friendly, making it a cost-effective option for wastewater treatment.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Engineering, Environmental

Efficient removal of uranium (VI) by 3D hierarchical Mg/Fe-LDH supported nanoscale hydroxyapatite: A synthetic experimental and mechanism studies

Yadan Guo et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Materials Science, Ceramics

Stiffening of biopolymer aerogel networks upon wetting: A model-based study

Ameya Rege et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2020)

Add to Collection

Article Engineering, Environmental

Ultrahigh efficient and selective adsorption of Au(III) from water by novel Chitosan-coated MoS2 biosorbents: Performance and mechanisms

Minghu Zhao et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Recent trends of MnO2-derived adsorbents for water treatment: a review

Syed M. Husnain et al.

NEW JOURNAL OF CHEMISTRY (2020)

Add to Collection

Article Engineering, Environmental

Photoconversion of U(VI) by TiO2: An efficient strategy for seawater uranium extraction

Ping Li et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Environmental Sciences

Preparation of core-shell structure Fe3O4@C@MnO2 nanoparticles for efficient elimination of U(VI) and Eu(III) ions

Shuhui Dai et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Add to Collection

Article Environmental Sciences

MnO2-loaded microorganism-derived carbon for U(VI) adsorption from aqueous solution

Wei Liao et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)

Add to Collection

Article Environmental Sciences

Mutual effects of U(VI) and Eu(III) immobilization on interpenetrating 3-dimensional MnO2/graphene oxide composites

Junping Ma et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Simple construction of core- shell MnO2@ TiO2 with highly enhanced U( VI) adsorption performance and evaluated adsorption mechanism

Junping Ma et al.

INORGANIC CHEMISTRY FRONTIERS (2019)

Add to Collection

Article Chemistry, Applied

Cellulose nanowhiskers improve the methylene blue adsorption capacity of chitosan-g-poly(acrylic acid) hydrogel

Bruno C. Melo et al.

CARBOHYDRATE POLYMERS (2018)

Add to Collection

Article Engineering, Environmental

Hydrothermal carbon superstructures enriched with carboxyl groups for highly efficient uranium removal

Bing Han et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Engineering, Environmental

Manganese oxide nanoparticles impregnated graphene oxide aggregates for cadmium and copper remediation

Shunli Wan et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Engineering, Environmental

Polydopamine coating assisted synthesis of MnO2 loaded inorganic/organic composite electrospun fiber adsorbent for efficient removal of Pb2+ from water

Yanzi Li et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Green & Sustainable Science & Technology

In-situ growth of hierarchical layered double hydroxide on polydopamine-encapsulated hollow Fe3O4 microspheres for efficient removal and recovery of U(VI)

Dongxu Yang et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Engineering, Environmental

Enhanced Enhanced adsorption of U(VI) and 241Am(III) from wastewater using Ca/Al layered double hydroxide@carbon nanotube composites

Haijun Chen et al.

JOURNAL OF HAZARDOUS MATERIALS (2018)

Add to Collection

Article Chemistry, Applied

Efficient removal of Pb(II), Cr(VI) and organic dyes by polydopamine modified chitosan aerogels

Dong-Mei Guo et al.

CARBOHYDRATE POLYMERS (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Development of a phosphate precipitation method for the recovery of uranium from lean tenor alkaline leach liquor

D. K. Singh et al.

HYDROMETALLURGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Amorphous MnO2 Modified Biochar Derived from Aerobically Composted Swine Manure for Adsorption of Pb(II) and Cd(II)

Jie Liang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Add to Collection

Article Engineering, Environmental

Superior immobilization of U(VI) and 243Am(III) on polyethyleneimine modified lamellar carbon nitride composite from water environment

Pengyi Wang et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Add to Collection

Article Chemistry, Physical

Removal of aqueous Pb(II) by adsorption on Al2O3-pillared layered MnO2

Haipeng Zhang et al.

APPLIED SURFACE SCIENCE (2017)

Add to Collection

Article Engineering, Environmental

Preparation of graphene oxide-manganese dioxide for highly efficient adsorption and separation of Th(IV)/U(VI)

Ning Pan et al.

JOURNAL OF HAZARDOUS MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Effect of environmental conditions on the sorption of uranium on Fe3O4@MnO2 hollow spheres

Jian Zhang et al.

JOURNAL OF MOLECULAR LIQUIDS (2016)

Add to Collection

Article Engineering, Environmental

Electrochemical and Spectroscopic Evidence on the One-Electron Reduction of U(VI) to U(V) on Magnetite

Ke Yuan et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2015)

Add to Collection

Article Chemistry, Physical

Investigation of interaction between U(VI) and carbonaceous nanofibers by batch experiments and modeling study

Rui Zhang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2015)

Add to Collection

Article Engineering, Environmental

PANI/GO as a super adsorbent for the selective adsorption of uranium(VI)

Dadong Shao et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Add to Collection

Review Chemistry, Multidisciplinary

Recovery of Uranium from Wet Phosphoric Acid by Solvent Extraction Processes

Denis Beltrami et al.

CHEMICAL REVIEWS (2014)

Add to Collection

Article Engineering, Environmental

Adsorption of Uranium(VI) to Manganese Oxides: X-ray Absorption Spectroscopy and Surface Complexation Modeling

Zimeng Wang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2013)

Add to Collection

Article Engineering, Environmental

Few-Layered Graphene Oxide Nanosheets As Superior Sorbents for Heavy Metal Ion Pollution Management

Guixia Zhao et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2011)

Add to Collection

Article Chemistry, Analytical

Solid phase extraction and preconcentration of uranium(VI) and thorium(IV) on Duolite XAD761 prior to their inductively coupled plasma mass spectrometric determination

Funda Armagan Aydin et al.

TALANTA (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.