4.5 Article

Hydrate Formation from Joule Thomson Expansion Using a Single Pass Flowloop

Related references

Note: Only part of the references are listed.
Article Engineering, Environmental

Probabilistic model for hydrate and wax risk assessment in oil and gas pipelines

Hongfei Xu et al.

Summary: The study aims to develop a risk-based flow assurance model for hydrates and wax, assessing the likelihood of blockages using thermo-hydraulic data. The models were tested against published studies and lab data, and their application was demonstrated through case studies. The models would aid in developing and implementing pipeline design and intervention strategies for a safe operation.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2023)

Article Thermodynamics

The locally varying thermodynamic driving force dominates the gas production efficiency from natural gas hydrate-bearing marine sediments

Lei Yang et al.

Summary: This study focuses on improving gas production efficiency from marine gas hydrate reservoirs by understanding the interactions between the depressurization scheme and hydrate decomposition behavior. Through a stepwise depressurization process and careful pressure management, the production efficiency can be significantly increased. Monitoring the local pressure and temperature conditions can guide the design of pressure schemes in field tests.

ENERGY (2023)

Article Energy & Fuels

Improved temperature distribution upon varying gas producing channel in gas hydrate reservoir: Insights from the Joule-Thomson effect

Dawei Guan et al.

Summary: The gas production from marine gas hydrate faces challenges such as low productivity and a complex geological environment. Horizontal wells are gaining attention for their potential in facilitating pressure propagation. This study explores the use of a pre-embedded dual horizontal well to examine its effects on local temperature distribution and gas production behavior. The results show that the dual well case leads to an increased flow channel and a higher reservoir temperature, potentially improving gas production efficiency. Recommendations are made for enlarging the depressurization region in field tests to make better use of the reservoir's sensible heat.

APPLIED ENERGY (2023)

Article Engineering, Environmental

The impact of mono-ethylene glycol and kinetic inhibitors on methane hydrate formation

W. S. Vincent Lim et al.

Summary: The study shows that in under-dosed MEG systems, MEG does not significantly affect the probability of hydrate formation, nor does it have a noticeable impact on the nucleation rate and distribution of hydrate formation. Additionally, a low-dosage kinetic hydrate inhibitor can be used together with MEG to further inhibit hydrate formation.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Energy & Fuels

Modeling and characterizing the thermal and kinetic behavior of methane hydrate dissociation in sandy porous media

Youqiang Liao et al.

Summary: This study adopts a LTNE model to investigate the thermal performance during methane hydrate dissociation. The results show that the LTNE model has better simulation accuracy compared to the traditional LTE model, providing more accurate estimations of temperature, gas, and water production profiles. The study also focuses on the Joule-Thomson effect, which has less impact under certain conditions but becomes more significant at high gas saturations.

APPLIED ENERGY (2022)

Article Engineering, Environmental

Gas hydrate nucleation in acoustically levitated water droplets

Kwanghee Jeong et al.

Summary: This study reports on subcooling-dependent measurements of hydrate formation on water droplets suspended in high-pressure natural gas via acoustic levitation. It reveals that formation rates of hydrates in different systems are influenced by different nucleation sites, providing important insights for hydrate formation studies.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Thermodynamics

Study on the influence of distributed Joule-Thomson effect on the performance of microchannel cryocooler

Hailong She et al.

Summary: This paper investigates the application of distributed Joule-Thomson (J-T) effect in throttling refrigeration systems. By designing and simulating a fully distributed J-T effect microchannel, the refrigeration performance is analyzed and compared with the prototype. The results show that the refrigeration ability of the fully distributed J-T cryocooler is slightly inferior to that of the prototype, but its structure can delay the excessive flow velocity caused by fluid flushing.

APPLIED THERMAL ENGINEERING (2022)

Article Engineering, Environmental

Extracting nucleation rates from ramped temperature measurements of gas hydrate formation

Mark T. J. Barwood et al.

Summary: The formation of solids in the energy industry poses risks to the safety and reliability of operational facilities. A new method for extracting nucleation rates from constant cooling experiments is presented, and methane hydrate formation probability is analyzed based on temperature ramp rates. The results indicate that increasing subcooling leads to more heterogeneous nucleation sites with higher energy barriers.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Hydrate nucleation and growth on water droplets acoustically-levitated in high-pressure natural gas

Kwanghee Jeong et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2019)

Review Engineering, Environmental

A review of gas hydrate growth kinetic models

Zhenyuan Yin et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Energy & Fuels

A new practical method to evaluate the Joule-Thomson coefficient for natural gases

N. Tarom et al.

JOURNAL OF PETROLEUM EXPLORATION AND PRODUCTION TECHNOLOGY (2018)

Article Thermodynamics

A micromachined Joule-Thomson cryogenic cooler with parallel two-stage expansion

H. S. Cao et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2016)

Article Engineering, Chemical

Hydrate plug formation risk with varying watercut and inhibitor concentrations

Young Hoon Sohn et al.

CHEMICAL ENGINEERING SCIENCE (2015)

Article Energy & Fuels

Probabilistic estimation of hydrate formation

Dinesh Herath et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2015)

Article Energy & Fuels

Sensitivity of Joule-Thomson cooling to impure CO2 injection in depleted gas reservoirs

Zaman Ziabakhsh-Ganji et al.

APPLIED ENERGY (2014)

Article Engineering, Chemical

Joule-Thomson Effects on the Flow of Liquid Water

Philip H. Stauffer et al.

TRANSPORT IN POROUS MEDIA (2014)

Review Chemistry, Applied

Fundamentals and Applications of Gas Hydrates

Carolyn A. Koh et al.

ANNUAL REVIEW OF CHEMICAL AND BIOMOLECULAR ENGINEERING, VOL 2 (2011)

Article Green & Sustainable Science & Technology

Analytical solution for Joule-Thomson cooling during CO2 geo-sequestration in depleted oil and gas reservoirs

Simon A. Mathias et al.

INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL (2010)

Article Thermodynamics

Joule-Thomson cooling due to CO2 injection into natural gas reservoirs

Curtis M. Oldenburg

ENERGY CONVERSION AND MANAGEMENT (2007)

Article Engineering, Mechanical

The Joule-Thomson effect in natural gas flow-rate measurements

I Maric

FLOW MEASUREMENT AND INSTRUMENTATION (2005)