Related references
Note: Only part of the references are listed.
Article
Engineering, Mechanical
Goram Gohel et al.
Summary: This research presents the impact properties of novel all-thermoplastic composite structures using different thermoplastic fabrics. The results show that the all-thermoplastic composites have higher load carrying capability and lower absorbed energy compared to epoxy composites, along with improved structural integrity.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
(2023)
Article
Engineering, Mechanical
Siyuan Yu et al.
Summary: A study on the dynamic response characteristics and anti-explosion mechanism of CSPC composite structures under explosion loads was conducted. Shallow-buried arch structure models were used for explosion experiments, and the deformation and failure characteristics were investigated. The presence of corrugated steel plates in the CSPC composite structure weakens the spallation effect and ensures the safety of the internal space.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
(2023)
Article
Engineering, Civil
Minzu Liang et al.
Summary: The failure mode and blast resistance of polyurea-coated metallic cylinders were investigated under internal multi-field coupled loading. The synergistic effect of detonation products, blast waves, and fragments loadings, as well as the damages on polyurea-coated cylinders, were studied through experiments. The results showed that the polyurea coating reduced substrate deformation, damage caused by shock waves and products, and prevented fragment dispersion due to its glassy transition capabilities.
THIN-WALLED STRUCTURES
(2023)
Article
Mechanics
Artemis Kontiza et al.
Summary: The study investigated the healing efficiency of microcapsules containing DCDP on carbon fibre reinforced polymers (CFRPs) through morphological and mechanical characterisation. Micro-CT was utilized to observe crack propagation dynamics in 3D, providing qualitative and quantitative information on CFRP structure and composition. Microcapsules with Poly(urea-formaldehyde) shell and DCPD core showed promising results in reducing crack volume and achieving mechanical restoration in CFRPs.
COMPOSITE STRUCTURES
(2022)
Article
Engineering, Mechanical
Zixi Xu et al.
Summary: Experimental and numerical investigations were conducted on the response of thin aluminum plates to airblast loading. It was found that the characteristics of counterintuitive behavior (CIB) are highly sensitive to structural and loading parameters, with the width of the CIB region varying based on these parameters. The occurrence of CIB was predicted by deriving the relationship between normalized duration of the critical point and charge mass.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
(2022)
Article
Engineering, Multidisciplinary
David Felix et al.
Summary: By improving the explosion model based on Finite Element Analysis (FEA) with Mott's equation, a fast simulation model is developed that can be used for quick predictions and real-time simulations to determine the number, weight, size, shape, and origin of fragments created by an explosion.
DEFENCE TECHNOLOGY
(2022)
Article
Engineering, Civil
Yu Liao et al.
Summary: In this study, woven glass fiber mesh (WGF) was used as a "soft rebar" to enhance the load-carrying capacity and flexural stiffness of the polyurea (PU) retrofitted structure. Finite element models and numerical simulation methods were employed to analyze and assess the effects. The results show that incorporating WGF can increase energy absorption and reduce damage degree.
Review
Engineering, Civil
S. M. Anas et al.
Summary: In certain developing countries, weak political systems and poor governance create a war-like environment where structures are targeted by blasts and bombs, with industrial blasts due to frail know-how and mishandlings being common. Understanding blast phenomena and extreme loads is crucial for assessing structural responses, and this study presents prospects for engineers, town planners, researchers, policymakers, and drafting committees to comprehend these phenomena.
INTERNATIONAL JOURNAL OF PROTECTIVE STRUCTURES
(2022)
Article
Engineering, Multidisciplinary
Jian-nan Zhou et al.
Summary: Polyurea coating and carbon fibre reinforced polymer techniques were used to retrofit a severely damaged urban utility tunnel. The retrofitted tunnel showed comparable or even better blast resistance than the intact one. Using basalt fibre reinforced polymer bars for reinforcement resulted in lower damage and lower retrofitting cost. Analysis using Euler beam theory considering the interaction between soil and structure yielded good agreement with experimental results.
DEFENCE TECHNOLOGY
(2022)
Article
Engineering, Mechanical
D. Chen et al.
Summary: This paper investigates the tensile properties of spray polyurea under different strain rates, revealing the sensitivity of its mechanical properties to strain rates. A nonlinear visco-hyperelastic constitutive model is established and validated through experiments.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
(2022)
Article
Materials Science, Multidisciplinary
Yuhang Xiang et al.
Summary: This paper comprehensively studied the laminated construction and failure mechanism of twill carbon fiber and ultra-high molecular weight polyethylene (UHMWPE) fiber hybrid composite laminates. The results were validated by ballistic impact experiments and simulations. The sample with carbon fiber in the front and UHMWPE fiber in the back showed the best impact energy absorption performance.
MATERIALS & DESIGN
(2022)
Article
Mechanics
J. M. Dewey
Summary: AirBlast is an interface that provides physical properties of blast waves from different types of TNT explosions, with a database of over 300 experimental explosions. As AirBlast is no longer compatible with modern operating systems, new interfaces are being developed using Excel(C) workbooks.
Article
Engineering, Civil
Lu Gan et al.
Summary: This study numerically investigates the dynamic responses and damage of plates subjected to blast loads generated by cuboid explosives. The results show that the shape of the cuboid explosives, characterized by the height-to-length ratio, significantly influences the deformation of the plates. The study also compares the equivalency between cuboid explosives and cubic explosives of the same mass.
THIN-WALLED STRUCTURES
(2022)
Article
Mechanics
Hui Li et al.
Summary: This study focuses on the optimal design of vibro-impact resistant fiber reinforced composite plates with polyurea coating, utilizing a theoretical model and experimental validation. By considering dynamic stiffness and impact damage area as key factors, an optimization analysis based on the Non-dominated Sorting Genetic Algorithm is conducted to achieve desired vibration and impact resistant capabilities while maintaining lightweight property, with design variables related to Pareto-optimal solutions.
COMPOSITE STRUCTURES
(2022)
Article
Mechanics
Pan Zhang et al.
Summary: This paper investigates the effect of foam filling on the performance of sandwich panels under combined blast and fragments loading. The experimental results show that increasing the stand-off distance can alleviate perforation failure, increasing the foam filler density can reduce permanent deformation of the panels, and foam filling can relieve debonding failure between the face sheet and core webs.
COMPOSITE STRUCTURES
(2022)
Review
Engineering, Mechanical
Abhiroop Goswami et al.
Summary: This paper discusses reinforced concrete structures subjected to cased explosive charges, presenting the damaging properties and structural responses of such devices. It also explores methods for quantifying the loading from these devices and evaluating structural responses. The paper identifies critical areas for further research and provides guidance for readers' own research.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
(2022)
Article
Engineering, Environmental
Meng Gu et al.
Summary: To enhance the safety of existing buildings in high-risk areas of the process industry, retrofitting in an economical and effective way is recommended. The mechanical properties and explosion responses of polyurea were investigated through laboratory tests and field gas explosion tests. The results showed that polyurea exhibited strain-rate-hardening behavior and its thickness played a significant role in improving the explosion resistance of fiber-reinforced cement board.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
(2022)
Review
Polymer Science
Rui Zhang et al.
Summary: Polyurea has attracted significant attention in blast and impact protection due to its exceptional quasi-static and dynamic mechanical properties. Its mechanical properties and energy absorption capacity can be adjusted through formulation optimization, molecular dynamics simulation, and the addition of reinforcing materials. The protection mechanism of polyurea against blasts and impacts is the result of the simultaneous effects of multiple properties. Depending on the characteristics of the load, polyurea needs to provide different performance characteristics, such as adhesion, hardness, and breaking elongation. This article reviews relevant publications on polyurea blast and impact protection, including material optimization, protection mechanisms, and applications.
Article
Chemistry, Multidisciplinary
Oussama Atoui et al.
Summary: This paper presents a laboratory-scale technique to generate a combined blast loading and projectile impacts on a target. The experiments show that it is possible to control the path of a single projectile inside the tube and generate a well-controlled planar blast wave. Both experimental and numerical data reveal the influence of charge and projectile parameters on the time interval.
APPLIED SCIENCES-BASEL
(2022)
Article
Engineering, Mechanical
Xin Wang et al.
Summary: This study investigates the feasibility of using polyurea coating to protect thin-walled liquid storage tanks against combined impact from fragments and blast shock waves. Experimental results show that polyurea can reduce perforation rates and damage areas on the tanks, while also exhibiting excellent self-healing properties to prevent liquid leakage.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
(2022)
Article
Mechanics
Benjamin Stavnar Elveli et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
(2022)
Article
Engineering, Civil
Long Zhang et al.
Summary: This paper studied the protective performance of polyurea-coated steel plates under the combined actions of blast and high-speed fragments through field tests. The results showed that under certain conditions, polyurea had a converse strengthening effect on the protective performance of steel plates, and only when the coating thickness exceeded a certain value did it play a strengthening role.
THIN-WALLED STRUCTURES
(2022)
Article
Acoustics
N. Mehreganian et al.
Summary: The study aims to deduce explicit solutions for the response of dynamically loaded thin clamped circular plates undergoing large deformations by minimizing the FVK energy functional. The solutions were derived from a presumed kinematically admissible displacement field and represented a Multiple Degrees-of-Freedom system.
JOURNAL OF SOUND AND VIBRATION
(2021)
Article
Materials Science, Ceramics
Pengcheng Hu et al.
Summary: A novel multi-layered composite armor system is proposed for ballistic protection, consisting of ductile metal, ceramic/UHMWPE composite, and ductile metal layers. Experimental and numerical studies show that optimal placement of the ceramic layer can significantly reduce residual velocity, while maximizing total energy absorption can be achieved by optimizing the ceramic placement strategy. Specific energy absorption of the UHMWPE layer can be significantly improved with a higher mass ratio, benefiting the energy absorption capability of the composite armor.
CERAMICS INTERNATIONAL
(2021)
Article
Materials Science, Multidisciplinary
Hongbo Zhai et al.
Summary: The study explores dynamic responses of FML plates compared to monolithic plates, finding that under anomalous dynamic behavior load conditions, FMLs oscillate before resting on permanent deformation, and laminate thickness strongly affects final deflection. Interaction of damage accumulation with deflection responses is also investigated. The findings have practical implications for optimal design of FMLs for extreme loadings.
FRONTIERS IN MATERIALS
(2021)
Article
Engineering, Civil
Qiang Liu et al.
Summary: Polyurea coating has been used to enhance the protective performance of multi-layered composite structures under blast or impact loading, especially showing significant improvement in the ballistic resistance of Carbon Fiber Reinforced Plastics (CFRP) composites.
THIN-WALLED STRUCTURES
(2021)
Article
Engineering, Civil
Gang Wu et al.
Summary: This study investigated the anti-blast performances of 6063-T5 aluminum alloy circular tubes coated with polyurea. The experiments showed significant improvements in blast resistance for the polyurea-coated aluminum alloy tubes, with established engineering calculations for thickness and deformation. This research provides theoretical support for anti-blast engineering applications.
THIN-WALLED STRUCTURES
(2021)
Article
Nanoscience & Nanotechnology
Khurshid Ahmed et al.
Article
Engineering, Mechanical
Arief N. Pratomo et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
(2020)
Article
Engineering, Civil
Minzu Liang et al.
THIN-WALLED STRUCTURES
(2020)
Proceedings Paper
Engineering, Civil
N. A. Sazhenkov et al.
1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1
(2020)
Article
Engineering, Mechanical
Shiyun Shi et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
(2019)
Article
Engineering, Mechanical
Shi Shaoqing et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
(2019)
Article
Engineering, Mechanical
V. Aune et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
(2017)
Article
Mechanics
Mehdi Shams Alizadeh et al.
Article
Mechanics
Minzu Liang et al.
INTERNATIONAL JOURNAL OF APPLIED MECHANICS
(2017)
Article
Engineering, Multidisciplinary
Minzu Liang et al.
COMPOSITES PART B-ENGINEERING
(2017)
Article
Engineering, Mechanical
V. Aune et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
(2016)
Article
Engineering, Mechanical
Ulrika Nystrom et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
(2009)
Article
Engineering, Mechanical
Q. M. Li et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
(2008)
