Related references
Note: Only part of the references are listed.Effect of glass fiber loading and reprocessing cycles on the mechanical, thermal, and morphological properties of isotactic polypropylene composites
Emmanuel O. O. Achukwu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2023)
Ultra-fast and low-cost electroactive biochar production for electroactive-constructed wetland applications: A circular concept for plant biomass utilization
Yamini Mittal et al.
CHEMICAL ENGINEERING JOURNAL (2023)
Mapping the progress in natural fiber reinforced composites: Preparation, mechanical properties, and applications
Barshan Dev et al.
POLYMER COMPOSITES (2023)
A comprehensive review on plant-based natural fiber reinforced polymer composites: Fabrication, properties, and applications
U. V. Akhil et al.
POLYMER COMPOSITES (2023)
Cellulosic pine needles-based biorefinery for a circular bioeconomy
Ashvinder K. Rana et al.
BIORESOURCE TECHNOLOGY (2023)
Bioenergy routes for valorizing constructed wetland vegetation: An overview
Henrique J. O. Pinho et al.
ECOLOGICAL ENGINEERING (2023)
Insight into pharmaceutical and personal care products removal using constructed wetlands: A comprehensive review
Mohomed Salah et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2023)
Potential of natural fiber based polymeric composites for cleaner automotive component production -a comprehensive review
Sahib Dua et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)
Effect of chemical treatment of jute fiber on thermo-mechanical properties of jute and sheep wool fiber reinforced hybrid polypropylene composites
Jarin Tusnim et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2022)
Characterization of Cellulosic Leaf Fiber from the Typha Angustifolia Plant
Govardhana Rao Chilukoti et al.
JOURNAL OF NATURAL FIBERS (2022)
Utilization of constructed wetland for the removal of heavy metal through fly ash bricks manufactured using harvested plant biomass
Mahesh Prasad Barya et al.
ECOHYDROLOGY (2022)
Cellulosic fibres-based epoxy composites: From bioresources to a circular economy
Neha Uppal et al.
INDUSTRIAL CROPS AND PRODUCTS (2022)
Cellulose/polyaniline hybrid nanocomposites: Design, fabrication, and emerging multidimensional applications
Ashvinder K. Rana et al.
INDUSTRIAL CROPS AND PRODUCTS (2022)
Effect of water absorption on the mechanical properties of bamboo/glass-reinforced polybenzoxazine hybrid composite
Kai Zhang et al.
POLYMERS & POLYMER COMPOSITES (2021)
Use of water hyacinth waste to produce fibre-reinforced polymer composites for concrete confinement: Mechanical performance and environmental assessment
Tidarut Jirawattanasomkul et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Adding value to poly (butylene succinate) and nanofibrillated cellulose-based sustainable nanocomposites by applying masterbatch process
Oskars Platnieks et al.
INDUSTRIAL CROPS AND PRODUCTS (2021)
From Wood and Hemp Biomass Wastes to Sustainable Nanocellulose Foams
Sergejs Beluns et al.
INDUSTRIAL CROPS AND PRODUCTS (2021)
Analysis of the properties of a glass/sisal/polyester composite
Rivalani B. Baloyi et al.
SCIENTIFIC REPORTS (2021)
Isolation of Textile Waste Cellulose Nanofibrillated Fibre Reinforced in Polylactic Acid-Chitin Biodegradable Composite for Green Packaging Application
Samsul Rizal et al.
POLYMERS (2021)
Enzymatic engineering of nanometric cellulose for sustainable polypropylene nanocomposites
Daria Zielinska et al.
INDUSTRIAL CROPS AND PRODUCTS (2021)
Physico-mechanical and Flammability Properties of Cyrtostachys renda Fibers Reinforced Phenolic Resin Bio-composites
Tamil Moli Loganathan et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2021)
Tensile properties and regression analysis of natural fiber and intralaminar mat reinforcement
Satyajit Dwivedi et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Comparative study of different natural fibre printed circuit board (PCB) composites
Varun Kumar et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Processing and characterization of pineapple fiber reinforced recycled polyethylene composites
Yashpal Singh et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Performance of horizontal flow constructed wetland for secondary treatment of domestic wastewater in a remote tribal area of Central India
Reetika Shukla et al.
SUSTAINABLE ENVIRONMENT RESEARCH (2021)
Effect of yarn singeing and commingling on the mechanical properties of jute/polypropylene composites
Muhammad Ayub Asghar et al.
POLYMER COMPOSITES (2021)
The Potential of Constructed Wetland Plants for Bioethanol Production
Yan Lin et al.
BIOENERGY RESEARCH (2020)
Mechanical and morphological characterization of basalt/Cissus quadrangularis hybrid fiber reinforced polylactic acid composites
A. Arul Jeya Kumar et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2020)
The Effect of Filler Content on the Tensile Behavior of Polypropylene/Cotton Fiber and poly(vinyl chloride)/Cotton Fiber Composites
Elsadig Mahdi et al.
MATERIALS (2020)
Impact Properties and Water Uptake Behavior of Old Newspaper Recycled Fibers-Reinforced Polypropylene Composites
David Hernandez-Diaz et al.
MATERIALS (2020)
Experimental and Numerical Study of the Critical Length of Short Kenaf Fiber Reinforced Polypropylene Composites
Mohammad Nematollahi et al.
FIBERS AND POLYMERS (2020)
Study on Domestic Wastewater Treatment of the Horizontal Subsurface Flow Wetlands (HSSF-CWs) Using Brachiaria mutica
Van Thi Thanh Ho et al.
WASTE AND BIOMASS VALORIZATION (2020)
Chemistry, Structures, and Advanced Applications of Nanocomposites from Biorenewable Resources
Burhan Ates et al.
CHEMICAL REVIEWS (2020)
Influence of designated properties on the characteristics of dombeya buettneri fiber/graphite hybrid reinforced polypropylene composites
I. O. Oladele et al.
SCIENTIFIC REPORTS (2020)
Transforming Marble Waste into High-Performance, Water-Resistant, and Thermally Insulative Hybrid Polymer Composites for Environmental Sustainability
Payal Bakshi et al.
POLYMERS (2020)
Life cycle thinking applied to phytoremediation of dairy wastewater using aquatic macrophytes for treatment and biomass production
Rita de Cassia Souza de Queiroz et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Plant-Based Natural Fibre Reinforced Composites: A Review on Fabrication, Properties and Applications
Md Syduzzaman et al.
COATINGS (2020)
Mechanical and Thermal Characterization of Camphor Soot Embedded Coir Fiber Reinforced Nylon Composites
T. Raghavendra et al.
FIBERS AND POLYMERS (2020)
Characterization of dimensional stability in flax fiber reinforced polypropylene composites
Aubrey M. Davis et al.
POLYMER COMPOSITES (2019)
Anaerobic digestion of wetland biomass from conservation management for biogas production
Slawomir Roj-Rojewski et al.
BIOMASS & BIOENERGY (2019)
The Inclusion of Ecosystem Service Valuations in Bioenergy Cost Analysis: A Case Study of Constructed Wetlands in the Neotropics
Brian F. Snyder
ECOLOGICAL ECONOMICS (2019)
Ultrahigh Performance of Nanoengineered Graphene-Based Natural Jute Fiber Composites
Forkan Sarker et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Synthesis and characterization of short sisal fibre polyester composites
Neha Uppal et al.
BULLETIN OF MATERIALS SCIENCE (2019)
Development of Green Composites Based on Polypropylene and Corncob Agricultural Residue
R. R. F. Ramos et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2019)
Preparation and property evaluation of Glass/Ramie fibers reinforced epoxy hybrid composites
R. Giridharan
COMPOSITES PART B-ENGINEERING (2019)
Recycling of sisal fiber reinforced polypropylene and polylactic acid composites: Thermo-mechanical properties, morphology, and water absorption behavior
Chakaphan Ngaowthong et al.
WASTE MANAGEMENT (2019)
Manufacturing and characterization of sustainable hybrid composites using sisal and hemp fibres as reinforcement of poly (lactic acid) via injection moulding
Asokan Pappu et al.
INDUSTRIAL CROPS AND PRODUCTS (2019)
Epoxy-polypyrrole-straw composites: Towards higher dielectric constant and lower water absorption
Anam Khan et al.
MATERIALS LETTERS (2019)
Effect of fabrication parameters on strength of natural fiber polypropylene composites: Statistical assessment
Khalid I. Alzebdeh et al.
MEASUREMENT (2019)
Preparation and characterization of polypropylene composites reinforced by functional ZnO/lignin hybrid materials
Lukasz Klapiszewski et al.
POLYMER TESTING (2019)
Recent progress of reinforcement materials: a comprehensive overview of composite materials
Dipen Kumar Rajak et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
The Role of Constructed Wetlands as Green Infrastructure for Sustainable Urban Water Management
Alexandros Stefanakis
SUSTAINABILITY (2019)
Characterization of Tensile Properties of Alkali-treated Kenaf/Polypropylene Composites
Harini Sosiati et al.
4TH INTERNATIONAL CONFERENCE ON INDUSTRIAL, MECHANICAL, ELECTRICAL, AND CHEMICAL ENGINEERING (2019)
Improving Thermal and Mechanical Properties of Injection Moulded Kenaf Fibre-reinforced Polyhydroxybutyrate Composites through Fibre Surface Treatment
Aziz Hassan et al.
BIORESOURCES (2019)
Performance Evaluation of Composite from Recycled Polypropylene Reinforced with Mengkuang Leaf Fiber
Mohamad Zaki Abdullah et al.
RESOURCES-BASEL (2019)
A review on abaca fiber reinforced composites
Joefreim A. Delicano
COMPOSITE INTERFACES (2018)
Influence of chemical treatments on mechanical properties of hemp fiber reinforced composites
R. Sepe et al.
COMPOSITES PART B-ENGINEERING (2018)
Properties of natural fibre composites for structural engineering applications
Kin-tak Lau et al.
COMPOSITES PART B-ENGINEERING (2018)
Development of the French system vertical flow constructed wetland to treat raw domestic wastewater in India
Anant Yadav et al.
ECOLOGICAL ENGINEERING (2018)
Characterization and properties of natural fiber polymer composites: A comprehensive review
M. R. Sanjay et al.
JOURNAL OF CLEANER PRODUCTION (2018)
The role of constructed wetlands in a new circular economy, resource oriented, and ecosystem services paradigm
E. Masi et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2018)
A recyclability study of bagasse fiber reinforced polypropylene composites
Manish Kumar Lila et al.
POLYMER DEGRADATION AND STABILITY (2018)
Effects of sodium carbonate on the performance of epoxy and polyester coir-reinforced composites
Julio Cesar dos Santos et al.
POLYMER TESTING (2018)
Adding benefit to wetlands - Valorization of harvested common reed through mushroom production
Malin Hultberg et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2018)
Tensile and flexural properties of natural fiber reinforced polymer composites: A review
Mohammad Z. R. Khan et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2018)
Natural Fibre Composites and Their Applications: A Review
Paulo Pecas et al.
JOURNAL OF COMPOSITES SCIENCE (2018)
Polymer matrix-natural fiber composites: An overview
T. G. Yashas Gowda et al.
COGENT ENGINEERING (2018)
Tensile and Thermal Degradation Properties of Poly (Lactic Acid)/Typha Latifolia Bio-Composites
Y. M. Daud et al.
GREEN DESIGN AND MANUFACTURE: ADVANCED AND EMERGING APPLICATIONS (2018)
Application of horizontal flow constructed wetland and solar driven disinfection technologies for wastewater treatment in India
Virendra Kumar Mishra et al.
WATER PRACTICE AND TECHNOLOGY (2018)
Effect of physiochemical structure on energy absorption properties of plant fibers reinforced composites: Dielectric, thermal insulation, and sound absorption properties
Shanping Zhang et al.
COMPOSITES COMMUNICATIONS (2018)
Effect of Pineapple Leaf Fibre and Kenaf Fibre Treatment on Mechanical Performance of Phenolic Hybrid Composites
M. Asim et al.
FIBERS AND POLYMERS (2017)
Plant fibre based bio-composites: Sustainable and renewable green materials
M. Ramesh et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Towards sustainable micro and nano composites from fly ash and natural fibers for multifunctional applications
Asokan Pappu et al.
VACUUM (2017)
The role of constructed wetlands for biomass production within the water-soil-waste nexus
C. T. Avellan et al.
WATER SCIENCE AND TECHNOLOGY (2017)
Biocomposite consisting of miscanthus fiber and biodegradable binary blend matrix: compatibilization and performance evaluation
Rajendran Muthuraj et al.
RSC ADVANCES (2017)
Enhanced Interfacial Strength of Natural Fiber/Polypropylene Composite with Mechanical-Interlocking Interface
Shaohong Shi et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)
Improving the Properties of Banana Fiber Reinforced Polymeric Composites by Treating the Fibers
William Jordan et al.
3RD INTERNATIONAL CONFERENCE ON NATURAL FIBERS: ADVANCED MATERIALS FOR A GREENER WORLD, ICNF 2017 (2017)
Preparation and characterizations of a chitosan-based medium-density fiberboard adhesive with high bonding strength and water resistance
Xiaodi Ji et al.
CARBOHYDRATE POLYMERS (2017)
Waste biorefineries: Enabling circular economies in developing countries
A. S. Nizami et al.
BIORESOURCE TECHNOLOGY (2017)
Hemp fiber reinforced polypropylene composites: The effects of material treatments
Theresa Sullins et al.
COMPOSITES PART B-ENGINEERING (2017)
Synthesis and Applications of Biodegradable Soy Based Graft Copolymers: A Review
Manju Kumari Thakur et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)
Co-Composting of Macrophyte Biomass and Sludge as an Alternative for Sustainable Management of Constructed Wetland By-Products
Soulwene Kouki et al.
CLEAN-SOIL AIR WATER (2016)
Effect of alkali treatment on interfacial bonding in abaca fiber-reinforced composites
Ming Cai et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Semichemical fibres of Leucaena collinsii reinforced polypropylene composites: Flexural characterisation, impact behaviour and water uptake properties
L. A. Granda et al.
COMPOSITES PART B-ENGINEERING (2016)
The possibility of using plants from hybrid constructed wetland wastewater treatment plant for energy purposes
Magdalena Gizinska-Gorna et al.
ECOLOGICAL ENGINEERING (2016)
Characterization and properties of low-linear-density polyethylene/Typha latifolia composites
Khalid Balaed et al.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2016)
Pyrolysis of wetland biomass waste: Potential for carbon sequestration and water remediation
Xiaoqiang Cui et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2016)
Facile extraction, processing and characterization of biorenewable sisal fibers for multifunctional applications
Asokan Pappu et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY (2016)
Long-term water absorption behavior of thermoplastic composites produced with thermally treated wood
Seyyed Khalil Hosseinihashemi et al.
MEASUREMENT (2016)
Capacity and mechanisms of ammonium and cadmium sorption on different wetland-plant derived biochars
Xiaoqiang Cui et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2016)
Potential mechanisms of cadmium removal from aqueous solution by Canna indica derived biochar
Xiaoqiang Cui et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2016)
Hybrid Composites from Wheat Straw, Inorganic Filler, and Recycled Polypropylene: Morphology and Mechanical and Thermal Expansion Performance
Min Yu et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2016)
Effect of Plant Harvesting on the Performance of Constructed Wetlands during Summer
Zhongchen Yang et al.
WATER (2016)
Applications of biocomposite materials based on natural fibers from renewable resources: a review
Kurki Nagaraj Bharath et al.
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2016)
Biomethanation Potential of Wetland Biomass in Codigestion with Pig Slurry
Rosa Marchetti et al.
WASTE AND BIOMASS VALORIZATION (2016)
Key issues in estimating energy and greenhouse gas savings of biofuels: challenges and perspectives
Dheeraj Rathore et al.
BIOFUEL RESEARCH JOURNAL-BRJ (2016)
Natural Fiber-Reinforced Hybrid Polymer Nanocomposites: Effect of Fiber Mixing and Nanoclay on Physical, Mechanical, and Biodegradable Properties
Md. Saiful Islam et al.
BioResources (2015)
Green composites based on polypropylene matrix and hydrophobized spend coffee ground (SCG) powder
D. Garcia-Garcia et al.
COMPOSITES PART B-ENGINEERING (2015)
Flexural properties of fully biodegradable alpha-grass fibers reinforced starch-based thermoplastics
F. X. Espinach et al.
COMPOSITES PART B-ENGINEERING (2015)
Flexural Properties of Typha Natural Fiber-Reinforced Polyester Composites
Rezig Sana et al.
FIBERS AND POLYMERS (2015)
Advances in industrial prospective of cellulosic macromolecules enriched banana biofibre resources: A review
Asokan Pappu et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2015)
The Potential of Canna lily for Wastewater Treatment Under Indian Conditions
A. K. Haritash et al.
INTERNATIONAL JOURNAL OF PHYTOREMEDIATION (2015)
Integrated Cr(VI) removal using constructed wetlands and composting
Mar-Yam Sultana et al.
JOURNAL OF HAZARDOUS MATERIALS (2015)
Mechanical properties and failure modes of recycled polypropylene/microcrystalline cellulose composites
N. Izzati Zulkifli et al.
MATERIALS & DESIGN (2015)
Energy and environmental assessment of industrial hemp for building applications: A review
Carlo Ingrao et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Layth Mohammed et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2015)
Fiber dispersion during compounding/injection molding of PP/kenaf composites: Flammability and mechanical properties
A. D. L. Subasinghe et al.
MATERIALS & DESIGN (2015)
Constructed wetlands: A future alternative wastewater treatment technology
MS Mthembu et al.
AFRICAN JOURNAL OF BIOTECHNOLOGY (2015)
Constructed wetlands for stormwater management in the UK: a concise review
R. Lucas et al.
CIVIL ENGINEERING AND ENVIRONMENTAL SYSTEMS (2015)
Effect of plant harvesting on the performance of constructed wetlands during winter: radial oxygen loss and microbial characteristics
Qian Wang et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2015)
Domestic wastewater treatment performance using constructed wetland
J. S. Sudarsan et al.
SUSTAINABLE WATER RESOURCES MANAGEMENT (2015)
Green composites: A review of material attributes and complementary applications
Michael P. M. Dicker et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
PLA based biocomposites reinforced with Arundo donax fillers
V. Fiore et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Effect of Reinforcement and Chemical Treatment of Fiber on the Properties of Jute-Coir Fiber Reinforced Hybrid Polypropylene Composites
Salma Siddika et al.
FIBERS AND POLYMERS (2014)
A simplified fabrication process for biofiber-reinforced polymer composites for automotive interior trim applications
Yicheng Du et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Hybrid fiber reinforced polymer composites - a review
T. P. Sathishkumar et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2014)
Research on biogas production potential of aquatic plants
Xinyuan Jiang et al.
RENEWABLE ENERGY (2014)
Effect of low content reed (Phragmite australis) fibers on the mechanical properties of recycled HDPE composites
D. Kraiem et al.
COMPOSITES PART B-ENGINEERING (2013)
Comparative analysis of constructed wetlands: The design and construction of the ecotechnology research facility in Langenreichenbach, Germany
Jaime Nivala et al.
ECOLOGICAL ENGINEERING (2013)
Comparisons of Biochar Properties from Wood Material and Crop Residues at Different Temperatures and Residence Times
Yu Wang et al.
ENERGY & FUELS (2013)
Fabrication and Physico-Chemical Properties of High-Performance Pine Needles/Green Polymer Composites
V. K. Thakur et al.
INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2013)
Mechanical properties of polypropylene composites: A review
Quazi T. H. Shubhra et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2013)
Sorption of ammonium and phosphate from aqueous solution by biochar derived from phytoremediation plants
Zheng Zeng et al.
JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE B (2013)
Biodegradable Poly(butylene succinate) Composites Reinforced by Cotton Fiber with Silane Coupling Agent
Buenaventurada P. Calabia et al.
POLYMERS (2013)
Nutrient removal efficiency and biomass production of different bioenergy plants in hypereutrophic water
Fengliang Zhao et al.
BIOMASS & BIOENERGY (2012)
Fabrication and characterizations of biodegradable jute reinforced soy based green composites
Ajaya Kumar Behera et al.
CARBOHYDRATE POLYMERS (2012)
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
M. M. Kabir et al.
COMPOSITES PART B-ENGINEERING (2012)
Critical factors on manufacturing processes of natural fibre composites
Mei-po Ho et al.
COMPOSITES PART B-ENGINEERING (2012)
Physical and mechanical properties of wood-plastic composites hybridized with inorganic fillers
Jae Gyoung Gwon et al.
JOURNAL OF COMPOSITE MATERIALS (2012)
Mechanical behavior of carbon/flax hybrid composites for structural applications
V. Fiore et al.
JOURNAL OF COMPOSITE MATERIALS (2012)
A review on mechanical behavior of natural fiber based hybrid composites
Srinivas Nunna et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
The impact of the nature of nanoclay on physical and mechanical properties of polypropylene/reed flour nanocomposites
Abdollah Najafi et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2012)
Influence of fiber content on the mechanical and thermal properties of Kenaf fiber reinforced thermoplastic polyurethane composites
Y. A. El-Shekeil et al.
MATERIALS & DESIGN (2012)
A study of surface changes of wood-polypropylene composites as the result of exterior weathering
Syetlana Butylina et al.
POLYMER DEGRADATION AND STABILITY (2012)
Constructed wetlands as biofuel production systems
Dong Liu et al.
NATURE CLIMATE CHANGE (2012)
Facilitating implementation of landscape-scale water management: The integrated constructed wetland concept
Mark Everard et al.
ECOSYSTEM SERVICES (2012)
Bioenergy production potential for aboveground biomass from a subtropical constructed wetland
Yi-Chung Wang et al.
BIOMASS & BIOENERGY (2011)
Effect of fibre content and alkali treatment on mechanical properties of Roystonea regia-reinforced epoxy partially biodegradable composites
Govardhan Goud et al.
BULLETIN OF MATERIALS SCIENCE (2011)
Estimation of the tensile strength of an oriented flax fiber-reinforced polymer composite
J. Andersons et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Interfacial studies of natural fibre/polypropylene composites using single fibre fragmentation test (SFFT)
A. Awal et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Green composites: A brief review
F. P. La Mantia et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Mechanical response of PHB- and cellulose acetate natural fiber-reinforced composites for construction applications
S. J. Christian et al.
COMPOSITES PART B-ENGINEERING (2011)
A review on the tensile properties of natural fiber reinforced polymer composites
H. Ku et al.
COMPOSITES PART B-ENGINEERING (2011)
Biocomposites from Musa textilis and polypropylene: Evaluation of flexural properties and impact strength
J. Girones et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Highly aligned flax/polypropylene nonwoven preforms for thermoplastic composites
Menghe Miao et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Constructed Wetlands for Wastewater Treatment: Five Decades of Experience
Jan Vymazal
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2011)
Novel, binder-free fiber reinforced composites based on a renewable resource from the reed-like plant Typha sp.
Guenter Wuzella et al.
INDUSTRIAL CROPS AND PRODUCTS (2011)
Oil palm fiber (OPF) and its composites: A review
S. Shinoj et al.
INDUSTRIAL CROPS AND PRODUCTS (2011)
Preparation and Mechanical Properties of High-Performance Short Ramie Fiber-Reinforced Polypropylene Composites
Yulin Feng et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Mechanical, Thermal and Dynamic-Mechanical Behavior of Banana Fiber Reinforced Polypropylene Nanocomposites
Manoranjan Biswal et al.
POLYMER COMPOSITES (2011)
Effects of Nanoclay and Coupling Agent on the Physico-Mechanical, Morphological, and Thermal Properties of Wood Flour/Polypropylene Composites
Hasan Ziaei Tabari et al.
POLYMER ENGINEERING AND SCIENCE (2011)
Creep behavior of bagasse fiber reinforced polymer composites
Yanjun Xu et al.
BIORESOURCE TECHNOLOGY (2010)
Biomass production of papyrus (Cyperus papyrus) in constructed wetland treating low-strength domestic wastewater
Thaneeya Perbangkhem et al.
BIORESOURCE TECHNOLOGY (2010)
Properties of thermoplastic rice starch composites reinforced by cotton or low-density polyethylene
J. Prachayawarakorn et al.
CARBOHYDRATE POLYMERS (2010)
Silane coupling agents used for natural fiber/polymer composites: A review
Yanjun Xie et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Removal of nutrients from wastewater with Canna indica L. under different vertical-flow constructed wetland conditions
Lihua Cui et al.
ECOLOGICAL ENGINEERING (2010)
Biobased Composites Prepared by Compression Molding with a Novel Thermoset Resin from Soybean Oil and a Natural-Fiber Reinforcement
Kayode Adekunle et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2010)
Investigation on the Use of Coir Fiber as Alternative Reinforcement in Polypropylene
S. H. P. Bettini et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2010)
Mechanical Properties of Polypropylene Composites Reinforced with Chemically Treated Coir and Abaca Fiber
Md Mominul Haque et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
Production of first and second generation biofuels: A comprehensive review
S. N. Naik et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)
Constructed Wetlands for Wastewater Treatment
Jan Vymazal
WATER (2010)
Preparation and properties of banana fiber-reinforced composites based on high density polyethylene (HDPE)/Nylon-6 blends
H. Liu et al.
BIORESOURCE TECHNOLOGY (2009)
A plant fiber reinforced polymer composite prepared by a twin-screw extruder
G. Sui et al.
BIORESOURCE TECHNOLOGY (2009)
Chemical modification of flax reinforced polypropylene composites
Maya Jacob John et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Natural fibre-reinforced composites for bioengineering and environmental engineering applications
Hoi-yan Cheung et al.
COMPOSITES PART B-ENGINEERING (2009)
Constructed wetlands in China: recent developments and future challenges
Dong Liu et al.
FRONTIERS IN ECOLOGY AND THE ENVIRONMENT (2009)
Physical, Chemical and Mechanical Properties of Hibiscus sabdariffa Fiber/Polymer Composite
A. S. Singha et al.
INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS (2009)
Properties of Medium Density Fiberboard Based on Bagasse Fibers
Alireza Ashori et al.
JOURNAL OF COMPOSITE MATERIALS (2009)
Recent Development in Natural Fiber Reinforced Polypropylene Composites
Ramakrishna Malkapuram et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)
Synthesis, Characterisation and Analysis of Hibiscus Sabdariffa Fibre Reinforced Polymer Matrix Based Composites
A. S. Singha et al.
POLYMERS & POLYMER COMPOSITES (2009)
Biofibres and biocomposites
Maya Jacob John et al.
CARBOHYDRATE POLYMERS (2008)
Improvement of physico-mechanical properties of jute fiber reinforced polypropylene composites by post-treatment
Md. Rezaur Rahman et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Investigations on mechanical properties of poly(propylene) and poly(lactic acid) reinforced by miscanthus fibers
Alain Bourmaud et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Effect of fiber surface treatment and fiber loading on the properties of bagasse fiber-reinforced unsaturated polyester composites
V. Vilay et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Synthesis and Characterization of Pine Needles Reinforced RF Matrix Based Biocomposites
A. S. Singha et al.
E-JOURNAL OF CHEMISTRY (2008)
Plant fiber - Industrial waste reinforced polymer composites as a potential wood substitute material
Mohini Saxena et al.
JOURNAL OF COMPOSITE MATERIALS (2008)
Impact of harvesting on constructed wetlands performance - a comparison between Scirpus grossus and Typha angustifolia
K. B. S. N. Jinadasa et al.
JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH PART A-TOXIC/HAZARDOUS SUBSTANCES & ENVIRONMENTAL ENGINEERING (2008)
Tensile, flexural and interlaminar shear properties of woven jute and jute-glass fabric reinforced polyester composites
K. Sabeel Ahmed et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Prospects of renewable energy utilisation for electricity generation in Bangladesh
A. K. Hossain et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2007)
Injection-molded short hemp fiber/glass fiber-reinforced polypropylene hybrid composites - Mechanical, water absorption and thermal properties
Suhara Panthapulakkal et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Kenaf natural fiber reinforced polypropylene composites: A discussion on manufacturing problems and solutions
M. Zampaloni et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Mechanical properties of wood-fiber reinforced polypropylene composites: Effect of a novel compatibilizer with isocyanate functional group
Ajay Karmarkar et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Natural-fiber-reinforced polymer composites applications in automotive
James Holbery et al.
JOM (2006)
Biomass energy and biochemical conversion processing for fuels and chemicals
M Balat
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2006)
Dynamic mechanical and thermal properties of MAPE treated jute/HDPE composites
S Mohanty et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Preparation and characterization of wheat straw fibers for reinforcing application in injection molded thermoplastic composites
S Panthapulakkal et al.
BIORESOURCE TECHNOLOGY (2006)
Hemp strands: PP composites by injection molding: Effect of low cost physico-chemical treatments
P Mutje et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2006)
Role of macrophyte Typha latifolia in a constructed wetland for wastewater treatment and assessment of its potential as a biomass fuel
MP Ciria et al.
BIOSYSTEMS ENGINEERING (2005)
Improvement of the impact performance of a starch based biopolymer via the incorporation of Miscanthus giganteus fibres
M Johnson et al.
INDUSTRIAL CROPS AND PRODUCTS (2005)
Effect of short wavelength UV-irradiation on ageing of polypropylene/cellulose compositions
H Kaczmarek et al.
POLYMER DEGRADATION AND STABILITY (2005)
About the use of fibrous materials in compact heat exchangers
L Tadrist et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2004)
Effect of MAPP as a coupling agent on the performance of Jute-PP composites
S Mohanty et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2004)
Constructed wetlands as a sustainable solution for wastewater treatment in small villages
ML Solano et al.
BIOSYSTEMS ENGINEERING (2004)
An assessment of biofuel use and burning of agricultural waste in the developing world
R Yevich et al.
GLOBAL BIOGEOCHEMICAL CYCLES (2003)
High stiffness natural fiber-reinforced hybrid polypropylene composites
HJ Li et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2003)
Biodegradable polyester composites reinforced with short abaca fiber
M Shibata et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2002)