☆ 4.7 Article

Virtually Possible: Enhancing Quality Control of 3D-Printed Medicines with Machine Vision Trained on Photorealistic Images

PHARMACEUTICS (2023)

Related references

Note: Only part of the references are listed.

Article Pharmacology & Pharmacy

Machine learning using multi-modal data predicts the production of selective laser sintered 3D printed drug products

Youssef Abdalla et al.

Summary: Three-dimensional (3D) printing in medicine is changing the way medicine is produced, offering precise digital fabrication and personalized designs. Selective laser sintering (SLS), an emerging 3D printing technology, is gaining attention for its high precision and ability to work with a wide range of pharmaceutical materials. However, fully realizing the potential of SLS for medicine requires expertise and extensive trial-and-error research. This study used machine learning (ML) to predict the printability of SLS formulations, achieving high accuracy by combining formulation composition data with various characterization techniques.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2023)

Add to Collection

Review Engineering, Manufacturing

A Review of State-of-the-Art on Enabling Additive Manufacturing Processes for Precision Medicine

Atheer Awad et al.

Summary: Precision medicine is a new healthcare delivery approach that considers patient variability, such as genetic makeups. The White House launched the Precision Medicine Initiative in 2015 to reshape healthcare delivery. Advanced manufacturing plays a crucial role in translating the concept of precision medicine into practice, including the fabrication of personalized drugs and drug delivery devices. This review discusses the products, manufacturing processes, and future outlook of precision medicine manufacturing.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2023)

Add to Collection

Article Computer Science, Artificial Intelligence

Cascaded foreign object detection in manufacturing processes using convolutional neural networks and synthetic data generation methodology

Jixiang Tang et al.

Summary: This paper discusses a novel method for intelligent foreign object detection and automatic data generation based on a cascaded convolutional neural network. The method addresses the limitations of traditional and deep learning methods in foreign object detection through data augmentation and synthetic image generation, presenting an effective and superior approach to foreign object detection.

JOURNAL OF INTELLIGENT MANUFACTURING (2023)

Add to Collection

Article Pharmacology & Pharmacy

Advancing non-destructive analysis of 3D printed medicines

Anna Kirstine Jørgensen et al.

TRENDS IN PHARMACOLOGICAL SCIENCES (2023)

Add to Collection

Article Chemistry, Analytical

In situ thermal image analysis of selective laser sintering for oral dosage form manufacturing

Evgenii Tikhomirov et al.

Summary: Additive Manufacturing (AM) is a fast-growing technique for producing personalized oral dosage forms, but it lacks quality control. Selective laser sintering, one of the AM techniques, allows for non-destructive quality control based on thermal image analysis at each layer of the printing process.

JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Practical guidelines for the use of gradient boosting for molecular property prediction

Davide Boldini et al.

Summary: This study provides a comprehensive comparison of gradient boosting algorithms for QSAR, showing that XGBoost achieves the best predictive performance and LightGBM is more efficient in terms of training time. The importance ranking of molecular features varies among models, highlighting the need for expert knowledge in evaluation. Furthermore, the relevance of hyperparameters varies greatly across datasets, emphasizing the importance of optimizing as many hyperparameters as possible for maximizing predictive performance.

JOURNAL OF CHEMINFORMATICS (2023)

Add to Collection

Article Materials Science, Ceramics

Investigation of oleic acid as a dispersant for hydroxyapatite powders for use in ceramic filled photo-curable resins for stereolithography

Brendan M. Kennedy et al.

Summary: The addition of oleic acid to hydroxyapatite resins improved their rheological properties, enabling the fabrication of scaffolds with continuous macro-porosity using digital light processing printing.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2023)

Add to Collection

Review Materials Science, Biomaterials

Machine learning to empower electrohydrodynamic processing

Fanjin Wang et al.

Summary: Electrohydrodynamic (EHD) processes show promise in healthcare fabrication, and the incorporation of machine learning (ML) is expected to enhance EHD workflows and improve production efficiency.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2022)

Add to Collection

Article Engineering, Chemical

Machine Learning Modeling and Predictive Control of the BatchCrystallization Process

Yingzhe Zheng et al.

Summary: This work develops a framework for building machine learning models and machine-learning-based predictive control schemes for batch crystallization processes. The study focuses on developing a one-dimensional population balance model and recurrent neural network (RNN) model to capture the dynamic behavior of the crystallization process and optimize the control.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2022)

Add to Collection

Article Pharmacology & Pharmacy

Disintegration testing augmented by computer Vision technology

Sydney Floryanzia et al.

Summary: Oral solid dosage forms, such as immediate release tablets, are widely used in the pharmaceutical industry. The current disintegration testing method focuses on the duration of tablet disintegration and is subjective and prone to human error. To improve data integrity, efforts have been made to automate the analysis using imaging technologies and computer algorithms. The development of the Computer Vision for Disintegration (CVD) system allows for more reliable data collection and offers the potential for a deeper understanding of disintegration rates and mechanisms.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)

Add to Collection

Article Pharmacology & Pharmacy

Prediction of Solid-State Form of SLS 3D Printed Medicines Using NIR and Raman Spectroscopy

Sarah J. Trenfield et al.

Summary: This article demonstrates the feasibility of using SLS 3D printing to produce solid dispersions containing a BCS II drug. It also shows the potential of near infrared and Raman spectroscopy to quantify amorphous content in formulations.

PHARMACEUTICS (2022)

Add to Collection

Article Materials Science, Ceramics

SLA-3d printing and compressive strength of PEGDA/nHAP biomaterials

Qinghua Chen et al.

Summary: In this study, PEGDA/nHAP biomaterials with optimal compressive strength were prepared by stereolithography (SLA), using a mechanically mixed paste of PEGDA, photoinitiator I2959, and bioceramic nHAP. The content of the photoinitiator was determined based on the cytotoxicity of cured samples. The solid content of the paste and processing parameters were optimized using a uniform design experiment method. The resulting PEGDA/nHAP printed specimens exhibited a minimum cured width of 65 pm and a minimum cured depth of 150 pm. The compressive strength reached a maximum of 61.0 +/- 3.9 MPa, which was significantly higher than pure PEGDA.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Pharmacology & Pharmacy

Real-time coating thickness measurement and defect recognition of film coated tablets with machine vision and deep learning

Mate Ficzere et al.

Summary: This paper presents a system that combines digital camera, image analysis, and deep learning to identify and categorize film coating defects and measure the film coating thickness of tablets. The YOLOv5 algorithm achieved an accuracy of 98.2% in defect recognition, and the coating thickness was measured by the diameter of tablets in pixels. The proposed system can be easily scaled up for large-scale production and enables real-time screening of tablets for improved quality control.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)

Add to Collection

Review Pharmacology & Pharmacy

Pharmaceutical applications of powder-based binder jet 3D printing process - A review

Koyel Sen et al.

Summary: Pharmaceutical applications of 3D printing have matured with FDA approval of Spritam, the first commercial 3D printed dosage form, but there is still a lack of understanding regarding the effect of raw materials on printed dosage forms and the feasibility of using this technology beyond conventional methods.

ADVANCED DRUG DELIVERY REVIEWS (2021)

Add to Collection

Article Materials Science, Biomaterials

Stereolithography (SLA) 3D printing of a bladder device for intravesical drug delivery

Xiaoyan Xu et al.

Summary: This study introduces the use of stereolithography (SLA) 3D printing for manufacturing novel indwelling bladder devices that allow extended and localized delivery of lidocaine hydrochloride. The devices showed good blood compatibility, resistance to external forces, and sustained drug release capabilities. This new approach offers potential for personalized and revolutionary intravesical drug delivery for bladder diseases.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Add to Collection

Article Immunology

Machine Learning Identifies Complicated Sepsis Course and Subsequent Mortality Based on 20 Genes in Peripheral Blood Immune Cells at 24 H Post-ICU Admission

Shayantan Banerjee et al.

Summary: By analyzing gene expression datasets, novel early biomarkers were identified and a machine learning model was developed to effectively predict disease trajectories and clinical outcomes of critically ill patients. These findings provide options to improve sepsis diagnosis, treatment, and prognosis.

FRONTIERS IN IMMUNOLOGY (2021)

Add to Collection

Article Polymer Science

Mechanical Properties and Energy Absorption Characteristics of Additively Manufactured Lightweight Novel Re-Entrant Plate-Based Lattice Structures

Sultan Al Hassanieh et al.

Summary: Three novel re-entrant plate lattice structures were designed and fabricated using additive manufacturing technology, and the elastic anisotropy of the lattice structures was studied. The FPV and FPMA showed anisotropic behavior while the FPT showed cubic symmetry. In terms of compressive response, the FPMA had the highest Young's modulus, with a mixed bending-stretching behavior, while the FPT exhibited a stretching-dominated behavior.

POLYMERS (2021)

Add to Collection

Review Pharmacology & Pharmacy

Applications of machine vision in pharmaceutical technology: A review

Dorian Laszlo Galata et al.

Summary: This paper introduces the analysis of images acquired by a digital camera with visible illumination and its applications in pharmaceutical manufacturing as a Process Analytical Technology (PAT). The development of machine vision and conversion to continuous manufacturing have accelerated the use of digital image analysis methods, enabling more comprehensive analysis and prediction of product quality attributes.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2021)

Add to Collection

Review Pharmacology & Pharmacy

Blend Segregation in Tablets Manufacturing and Its Effect on Drug Content Uniformity-A Review

Emilia Jakubowska et al.

Summary: This review discusses the most relevant powder segregation mechanisms in tablet manufacturing, summarizes the latest research on particle segregation and uniformity loss at different stages of the production process, and considers formulation and processing factors affecting content uniformity and tablet manufacturing.

PHARMACEUTICS (2021)

Add to Collection

Article Pharmacology & Pharmacy

Machine Learning and Machine Vision Accelerate 3D Printed Orodispersible Film Development

Colm S. O'Reilly et al.

Summary: Orodispersible films (ODFs) are a promising delivery system in various clinical applications, but their manufacturing lacks personalized, on-demand or sustainable approaches. To address this, 3D printing and machine learning technologies were utilized for on-demand production and quality control of ODFs. The combination of these technologies showed potential for rapid production and verification of ODFs, as well as automation of in vitro testing using machine vision tools.

PHARMACEUTICS (2021)

Add to Collection

Article Computer Science, Artificial Intelligence

VR-Caps: A Virtual Environment for Capsule Endoscopy

Kagan Incetan et al.

Summary: Current capsule endoscopes and next-generation robotic capsules are complex cyber-physical platforms that require orchestration of software and hardware functions. Data-driven algorithms and physically-realistic simulations play a key role in the development of these systems.

MEDICAL IMAGE ANALYSIS (2021)

Add to Collection

Review Pharmacology & Pharmacy

Translating 3D printed pharmaceuticals: From hype to real-world clinical applications

Iria Seoane-Viano et al.

Summary: 3D printing technology is revolutionizing the pharmaceutical industry by enabling the production of personalized drug products on demand. Despite its demonstrated benefits, the full clinical potential of the technology is yet to be realized.

ADVANCED DRUG DELIVERY REVIEWS (2021)

Add to Collection

Article Toxicology

Effective data-balancing methods for class-imbalanced genotoxicity datasets using machine learning algorithms and molecular fingerprints

Su-Yong Bae et al.

Summary: Machine learning and deep learning approaches have been increasingly utilized in toxicology, however, class-imbalanced toxicity data pose challenges. This study identified effective data-balancing methods and demonstrated that oversampling techniques improved model performance.

COMPUTATIONAL TOXICOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Machine learning predicts 3D printing performance of over 900 drug delivery systems

Brais Muniz Castro et al.

Summary: Three-dimensional printing (3DP) is a transformative technology in pharmaceutical research, producing personalized drug products. However, slow progress has been made due to the lengthy trial-and-error optimization process. Artificial intelligence (AI) has the potential to revolutionize pharmaceutical 3DP by analyzing large datasets.

JOURNAL OF CONTROLLED RELEASE (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Nanoparticle synthesis assisted by machine learning

Huachen Tao et al.

Summary: This review discusses the use of machine learning in the synthesis of nanoparticles and the importance of data collection methods and nanoparticle properties for their applications.

NATURE REVIEWS MATERIALS (2021)

Add to Collection

Proceedings Paper Engineering, Aerospace

Artificial Dataset Generation for Automated Aircraft Visual Inspection Artificial Dataset Generation for Automated Aircraft Visual Inspection

Nathan J. Gaul et al.

Summary: Aircraft visual inspection is crucial but time-consuming and expensive. Researchers are exploring the use of UAVs and CNNs for automated inspection, but face challenges in generating training datasets due to their niche nature. Innovative approaches, such as leveraging artificial data generation techniques from self-driving car research, are being proposed to address this issue.

PROCEEDINGS OF THE 2021 IEEE NATIONAL AEROSPACE AND ELECTRONICS CONFERENCE (NAECON) (2021)

Add to Collection

Proceedings Paper Computer Science, Artificial Intelligence

Hyperparameter Optimization: Comparing Genetic Algorithm against Grid Search and Bayesian Optimization

Hussain Alibrahim et al.

Summary: The performance of machine learning algorithms is influenced by factors such as data quantity, quality, features, choice of algorithm, and parameter configuration. This study aims to compare different algorithms to find the best hyperparameter values for neural networks, using grid search, Bayesian, and genetic algorithms as well as evaluation measures like accuracy and running time.

2021 IEEE CONGRESS ON EVOLUTIONARY COMPUTATION (CEC 2021) (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Benchmark for filter methods for feature selection in high-dimensional classification data

Andrea Bommert et al.

COMPUTATIONAL STATISTICS & DATA ANALYSIS (2020)

Add to Collection

Article Pharmacology & Pharmacy

Non-destructive dose verification of two drugs within 3D printed polyprintlets

Sarah J. Trenfield et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

Add to Collection

Article Multidisciplinary Sciences

Ultrafast machine vision with 2D material neural network image sensors

Lukas Mennel et al.

NATURE (2020)

Add to Collection

Article Pharmacology & Pharmacy

3D Printed Tablets (Printlets) with Braille and Moon Patterns for Visually Impaired Patients

Atheer Awad et al.

PHARMACEUTICS (2020)

Add to Collection

Article Pharmacology & Pharmacy

3D printing: Principles and pharmaceutical applications of selective laser sintering

Atheer Awad et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

Add to Collection

Article Pharmacology & Pharmacy

M3DISEEN: A novel machine learning approach for predicting the 3D printability of medicines

Moe Elbadawi et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

Add to Collection

Article Pharmacology & Pharmacy

Machine Learning in Drug Discovery and Development Part 1: A Primer

Alan Talevi et al.

CPT-PHARMACOMETRICS & SYSTEMS PHARMACOLOGY (2020)

Add to Collection

Article Pharmacology & Pharmacy

3D Printed Pellets (Miniprintlets): A Novel, Multi-Drug, Controlled Release Platform Technology

Atheer Awad et al.

PHARMACEUTICS (2019)

Add to Collection

Article Multidisciplinary Sciences

An Automated Training of Deep Learning Networks by 3D Virtual Models for Object Recognition

Kamil Zidek et al.

SYMMETRY-BASEL (2019)

Add to Collection

Article Pharmacology & Pharmacy

Automated therapy preparation of isoleucine formulations using 3D printing for the treatment of MSUD: First single-centre, prospective, crossover study in patients

Alvaro Goyanes et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Application Research of Improved YOLO V3 Algorithm in PCB Electronic Component Detection

Jing Li et al.

APPLIED SCIENCES-BASEL (2019)

Add to Collection

Article Computer Science, Artificial Intelligence

One Pixel Attack for Fooling Deep Neural Networks

Jiawei Su et al.

IEEE TRANSACTIONS ON EVOLUTIONARY COMPUTATION (2019)

Add to Collection

Article Chemistry, Analytical

Process analytical technology for continuous manufacturing tableting processing: A case study

Victoria Pauli et al.

JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS (2019)

Add to Collection

Article Biochemistry & Molecular Biology

Improving classical scoring functions using random forest: The non-additivity of free energy terms' contributions in binding

Karim Afifi et al.

CHEMICAL BIOLOGY & DRUG DESIGN (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Automated Machine Vision System for Liquid Particle Inspection of Pharmaceutical Injection

Hui Zhang et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2018)

Add to Collection

Article Pharmacology & Pharmacy

Fabricating 3D printed orally disintegrating printlets using selective laser sintering

Fabrizio Fina et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)

Add to Collection

Article Multidisciplinary Sciences

Deep learning improves prediction of drug-drug and drug-food interactions

Jae Yong Ryu et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)

Add to Collection

Review Pharmacology & Pharmacy

3D Printing Pharmaceuticals: Drug Development to Frontline Care

Sarah J. Trenfield et al.

TRENDS IN PHARMACOLOGICAL SCIENCES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Biobased Acrylate Photocurable Resin Formulation for Stereolithography 3D Printing

Vincent S. D. Voet et al.

ACS OMEGA (2018)

Add to Collection

Article Chemistry, Physical

Chemically intuited, large-scale screening of MOFs by machine learning techniques

Giorgos Borboudakis et al.

NPJ COMPUTATIONAL MATERIALS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Characterizing powder materials using keypoint-based computer vision methods

Brian L. DeCost et al.

COMPUTATIONAL MATERIALS SCIENCE (2017)

Add to Collection

Article Computer Science, Artificial Intelligence

Parallel vision for perception and understanding of complex scenes: methods, framework, and perspectives

Kunfeng Wang et al.

ARTIFICIAL INTELLIGENCE REVIEW (2017)

Add to Collection

Article Computer Science, Artificial Intelligence

Using random forest and decision tree models for a new vehicle prediction approach in computational toxicology

Pritesh Mistry et al.

SOFT COMPUTING (2016)

Add to Collection

Review Chemistry, Analytical

Process Analytical Technology for continuous manufacturing of solid-dosage forms

Margot Fonteyne et al.

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2015)

Add to Collection

Review Food Science & Technology

Image acquisition techniques for assessment of legume quality

Shveta Mahajan et al.

TRENDS IN FOOD SCIENCE & TECHNOLOGY (2015)

Add to Collection

Article Ecology

Random forests for classification in ecology

D. Richard Cutler et al.

ECOLOGY (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.