Hot Deformation Behavior and Mechanisms of SiC Particle Reinforced Al-Zn-Mg-Cu Alloy Matrix Composites

A systematic and comprehensive analysis of the hot deformation and mechanisms of SiC particle-reinforced aluminum matrix composites is significant for optimizing the processing of the composites and obtaining the desired components. Based on this, related research on 11 vol% SiCp particle-reinforced 7050Al matrix composites was carried out. Hot compression experiments were carried out on the Gleeble-3500 thermal simulator to study the hot deformation behavior of composites at the temperature of 370-520 degrees C and strain rate of 0.001-10 s-1. The hyperbolic sine constitutive equation of the material was established, and the processing map was calculated. Combining the typical metallograph and misorientation angle distribution, the microstructure evolution mechanism of composites was analyzed, and the effect of particles on recrystallization behavior was investigated. Under certain process conditions, the dominant deformation mechanism of composites changed from dynamic recovery (DRV) to dynamic recrystallization (DRX), and the grain boundary sliding mechanism began to play a role. In addition, high temperature tensile and elongation at break were tested, and it was found that the dominant form of fracture failure changed from brittle fracture of the particles to ductile fracture of the matrix as the temperature increased.

Automated summary

A systematic and comprehensive analysis of the hot deformation and mechanisms of SiC particle-reinforced aluminum matrix composites is significant for optimizing the processing of the composites and obtaining the desired components. Through hot compression experiments and metallographic analysis, it was found that the dominant deformation mechanism and fracture failure mode of the composite material changed under certain process conditions.