Related references
Note: Only part of the references are listed.
Article
Engineering, Mechanical
Xuebo Li et al.
Summary: This paper proposes an identification model based on a Gated Recurrent Unit (GRU) Network with Attention mechanism for accurate identification of braking intention, improved braking safety, and maximized energy recovery efficiency for electric vehicles. The model is trained and verified using vehicle braking test data, braking process analysis, and characteristic parameters selection. The attention mechanism is introduced to capture valuable feature information and improve identification accuracy. Comparative verification results show that the Attention-GRU model outperforms other comparison models, achieving an identification accuracy of 96.7% with accuracy rates for slight braking, normal braking, and emergency braking at 96.3%, 95.8%, and 100% respectively. The identified braking intention can serve as an effective basis for establishing vehicle control strategies.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING
(2023)
Article
Energy & Fuels
Chengxu Li et al.
Summary: In this paper, an improved maximum torque per ampere (MTPA) control method for high saturation interior permanent magnet synchronous motors (IPMSM) is proposed. The conventional models of flux linkage and torque are improved by analyzing the nonlinear variation of the permanent magnet (PM) flux linkage with dq-axis currents. An expression suitable for MTPA control of high saturated IPMSM is derived based on the improved models. The proposed parameter fitting models are incorporated into the MTPA optimization algorithm to obtain the MTPA curve, and simulations and experiments verify the effectiveness of the proposed method in enhancing the control accuracy of the MTPA angle.
Article
Energy & Fuels
Xuebo Li et al.
Summary: A composite braking control strategy for four-axle battery electric heavy-duty trucks equipped with an electromechanical braking system is studied. The strategy includes torque distribution and dynamic coordinated control to maximize energy recovery and ensure braking stability. The proposed strategy outperforms benchmark strategies in terms of comprehensive braking performance and achieves an energy recovery rate above 40% in different load states.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH
(2023)
Article
Engineering, Electrical & Electronic
Xiaoyong Zhu et al.
Summary: From the perspective of motor design and control, this article proposes a new adjustable-flux permanent magnet synchronous motor (AF-PMSM) sensorless drive system that can resolve the issue of parameter variation in diverse operating conditions. With a special rotor design and a parameter-sensitive adaptive online decoupling sensorless control strategy, the estimated accuracy of rotor position and the suppression of secondary saliencies harmonics can be improved. Experimental results confirm the feasibility and effectiveness of the proposed motor drive system.
IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION
(2023)
Article
Automation & Control Systems
Amirhossein Malekipour et al.
Summary: In this article, a novel sensorless control for permanent magnet synchronous machine (PMSM) using its radiated acoustic noise is proposed. The field formation within the airgap leading to the generation of radial forces and acoustic noise is extensively investigated. Distinctive sidebands around the injected frequency directly related to the fundamental synchronous frequency are observed in the experimental verification, depending on the machine structure. The proposed signal processing algorithm with self-adaptive band-pass filters effectively extracts the rotor position information from the distorted and environment-sensitive acoustic noise waveform.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
(2023)
Article
Automation & Control Systems
Victor Repecho et al.
Summary: This article introduces a sensorless scheme that accurately observes the rotor angle of permanent magnet synchronous machines at low speeds without injecting high-frequency signals. The algorithm utilizes the inaccuracies in the switching functions slopes produced by the saliency effect to determine the rotor position and speed, and provides information in a compact form using the equivalent control concept and sliding-mode-based phase-locked loop observer.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
(2022)
Article
Engineering, Electrical & Electronic
Xiaodong Sun et al.
Summary: This article presents a new scheme that uses a high-frequency signal injection method and an iterative strategy to extract the rotor position angle of interior permanent magnet synchronous motors. By dividing the angle space into several independent sectors and calculating the defined cost function, the optimal rotor position angle can be obtained. Experimental tests have confirmed the effectiveness of the proposed scheme.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2022)
Article
Engineering, Electrical & Electronic
Shaobo Liu et al.
Summary: For the position sensorless PMSM drive system, a stator temperature identification method with position error adaptive compensation is proposed. The method improves the identification precision by compensating the position error based on the MCVOT scheme and adopts a current vector angle tracking strategy with adaptive variable tracking step value in the rotating reference frame.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2022)
Article
Energy & Fuels
Yunfei Zhang et al.
Summary: This paper presents a flux-weakening model predictive control (FW-MPC) for the interior permanent magnet synchronous motor (IPMSM) drive system. The proposed FW-MPC is capable of extending the operating region of the IPMSM and finding the optimal point with maximum electrical torque under current and voltage limitations, making it beneficial for the motor's application. The simulation and experiment results demonstrate the feasibility and effectiveness of the proposed FW-MPC in driving the IPMSM in the flux-weakening region.
Article
Energy & Fuels
Karol Kyslan et al.
Summary: This article compares different switching functions used in sensorless field-oriented control and verifies their influence on the performance of PMSM. The optimal shaping coefficient values are found through statistical evaluation.
Article
Engineering, Chemical
Xiangyu Luo et al.
Summary: In recent years, there has been an increase in the use of multiphase electric drives in industrial applications. These machines have advantages over three-phase systems, making them suitable for harsh working conditions. To improve their reliability, some authors have developed sensorless control schemes where the absence of an encoder ensures proper system performance. However, these sensorless control systems face challenges due to parameter uncertainties. The use of extended Kalman filters helps overcome this by considering system and measurement errors in the estimation process. This study proposes an extended Kalman filter that decomposes the original state equation, reducing the complexity of the estimation stage and enhancing the overall phase-current quality by suppressing third-harmonic injection.
Article
Automation & Control Systems
Yanzhen Shao et al.
Summary: A two-degree-of-freedom structure-based backstepping observer (TSBO) is proposed in this article to improve the accuracy and frequency-domain response of the BEMF observer for sensorless PMSM drives. By introducing a second-order complex vector transfer function, the TSBO achieves bandpass characteristics without the need for an extra filter.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
(2022)
Article
Engineering, Multidisciplinary
P. K. Gayen
Summary: An improved rotor position and speed estimation technique for DFIG is proposed in this paper, achieving various desirable features and accurate estimation regardless of power levels. Compared to existing excitation current based schemes, the proposed method offers superior performance without magnetizing parameter mismatch.
Article
Engineering, Electrical & Electronic
Yanping Xu et al.
Summary: The paper presents a disturbance rejection speed sensorless control of PMSMs based on full order adaptive observer to improve robustness against load disturbances. Experimental results show better anti-interference capability compared to full order adaptive speed sensorless control.
JOURNAL OF POWER ELECTRONICS
(2021)
Article
Multidisciplinary Sciences
Quanmin Zhu
Summary: This study introduces a complete model-free sliding mode control framework for continuous-time non-affine non-linear dynamic systems with unknown models. The novelty lies in the introduction of two equalities to assign the derivative of the sliding functions. This framework includes double SMC design, state observer design, and desired reference state vector design, without requiring nominal plant models.
SCIENTIFIC REPORTS
(2021)
Article
Automation & Control Systems
Xinghe Fu et al.
Summary: An initial rotor position estimation method based on the dynamical equations of the PMSM is proposed in this study, which analyzes vibration signals to determine rotor position and identifies rotor magnetic polarity based on saturation saliency effect. The method has the advantages of easy implementation, high adaptability, and strong robustness.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
(2021)
Article
Engineering, Electrical & Electronic
Jiwon Yoo et al.
Summary: This article analyzes the impact of angle estimation error on sensorless torque control of permanent-magnet synchronous motor (PMSM) and proposes a torque feedforward method considering transient angle error to enhance control loop gain margin. The proposed method is validated through simulation and experimental results.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2021)
Review
Engineering, Electrical & Electronic
Anantaram Varatharajan et al.
Summary: This article reviews six fundamental-wave excitation sensorless techniques for synchronous machines, all of which rely on a hybrid flux observer scheme. Experimental validation was conducted to support the stability analysis of these techniques.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2021)
Article
Computer Science, Information Systems
Lu Wang et al.
Summary: This paper proposes a novel method for developing driving cycles for battery electric vehicles in Xi'an city, utilizing a combination of data collection methods, dimension reduction, and clustering techniques to select a target cycle. The effectiveness of the proposed method is demonstrated through a comparative study, revealing the typicality of the target cycle compared to other legislative cycles.
Article
Automation & Control Systems
Chao Gong et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
(2020)
Review
Automation & Control Systems
Gaolin Wang et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
(2020)
Article
Automation & Control Systems
Oussama Saadaoui et al.
ASIAN JOURNAL OF CONTROL
(2019)
Review
Engineering, Electrical & Electronic
Qiong Wang et al.
IEEJ TRANSACTIONS ON ELECTRICAL AND ELECTRONIC ENGINEERING
(2019)
Article
Energy & Fuels
Ming-Shyan Wang et al.
Article
Energy & Fuels
Tae-Uk Jung et al.
Article
Automation & Control Systems
Xin Luo et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
(2016)
Article
Engineering, Multidisciplinary
J. M. Liu et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS
(2014)
Article
Robotics
Gerasimos G. Rigatos et al.
International Journal of Advanced Robotic Systems
(2012)
