Related references
Note: Only part of the references are listed.
Article
Engineering, Chemical
Haoran Xu et al.
Summary: In this study, a new laser sensitizer, copper pyrophosphate, was proposed for laser-induced selective metallization. The conductivities of the copper layers obtained by near-infrared and ultraviolet laser activation were measured. The adhesion of the copper layers to the composites was evaluated. This study also investigated the color change, microstructure, and composition changes of the composites before and after laser activation. Furthermore, decorative patterns and interdigitated capacitor patterns were successfully fabricated on 3D plastic parts, demonstrating the potential application prospects of laser-induced selective metallization.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
(2023)
Review
Chemistry, Multidisciplinary
Qiuying Xia et al.
Summary: This review discusses the current status and existing challenges of all-solid-state thin-film lithium/lithium-ion microbatteries (TFBs) for practical application in internet-connected devices for the Internet of Things (IoT). Recent progress in thin-film deposition, electrode and electrolyte materials, interface modification, and 3D architecture design is comprehensively summarized and discussed, with an emphasis on state-of-the-art strategies to improve the areal capacity and cycling stability of TFBs. Perspectives on designing practically accessible TFBs are provided to guide the future development of reliable power sources for IoT devices.
ADVANCED MATERIALS
(2023)
Article
Engineering, Manufacturing
Peiren Wang et al.
Summary: Hybrid additive manufacturing technology (HAM) is an advanced way of traditional additive manufacturing (AM) that allows for the direct fabrication of fully functional end-use products. Using a combination of vat photopolymerization (VPP) 3D printing and laser-activated electroless plating (ELP), the proposed HAM technology can successfully create conformal 3D printed electronics. By developing a functional liquid photopolymer doped with antimony tin oxide (ATO) and titania (TiO2) nanoparticles, the technology achieves high fabrication accuracy and customizable full-functional electronic products.
ADDITIVE MANUFACTURING
(2023)
Article
Nanoscience & Nanotechnology
Gaohua Hu et al.
Summary: In this study, a facile and scalable patterning method for liquid metal conductors on an elastomer substrate is reported. Laser-activated patterns are used as versatile templates to define arbitrary liquid metal patterns. The as-prepared liquid metal features show excellent conductivity, high resolution, ultrahigh stretchability, and electromechanical durability. The practical suitability of liquid metal conductors is demonstrated by fabricating a stretchable LED matrix and a smart sensing glove. The maskless fabrication technique introduced here allows versatile patterning of liquid metal conductors with affordable costs, which may stimulate a broad range of applications in stretchable electronic devices and systems.
ACS APPLIED MATERIALS & INTERFACES
(2023)
Article
Chemistry, Multidisciplinary
Manjuan Huang et al.
Summary: The evolution of AIoT greatly promotes the development of smart cities by enabling comprehensive perception and seamless communication. However, the integration and sustainability of AIoT nodes are currently limited. In this study, an intelligent piezoelectric AIoT node called iCUPE is designed, which integrates energy harvesting and self powered sensing modules. It achieves continuous power supply over a wide frequency range and high-precision multifunctional vibration recognition. The proposed iCUPE is scalable and essential for AIoT implementation in diverse environments.
Article
Chemistry, Multidisciplinary
Yaqiang Ji et al.
Summary: In this study, a method for customizing microstructured flexible electrodes by femtosecond laser-activated metal deposition is proposed. The method takes advantage of catalyzing particles scattered during femtosecond laser ablation and is suitable for moldless, maskless, and low-cost fabrication of microstructured metal layers. The developed flexible capacitive pressure sensor with microstructured electrodes exhibits high sensitivity, low detection limit, rapid response/recovery time, and excellent stability. Moreover, the proposed method can also fabricate a pressure sensor array in a maskless manner for spatial pressure mapping.
Article
Engineering, Manufacturing
Liexin Wu et al.
Summary: This paper proposes a hybrid AM method combining FDM and LAM for manufacturing 3D electronics based on PEEK. Conformal copper patterns were deposited on 3D-printed PEEK parts, and a high level of adhesion was achieved. The application of a hydrophobic coating on the FDM-printed PEEK promoted better catalytic selectivity and improved the resolution of electroless plated copper lines.
INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING
(2023)
Article
Chemistry, Physical
Xingwei Wang et al.
Summary: In this study, a high-precision CeO2/V2C ammonia sensor capable of operating at room temperature was prepared by an in situ polymerization method. The sensor showed excellent response, low detection limit, stability, and fast response/recovery time for low concentrations of ammonia gas. Circuit modules of Bluetooth, Near Field Communication (NFC), and IoT data were designed based on the sensor parameters, enabling factory emission detection, personnel safety management, and gas leak inspection. All monitoring data are visualized on both the computer and cell phone sides.
JOURNAL OF MATERIALS CHEMISTRY A
(2023)
Article
Chemistry, Multidisciplinary
Manjuan Huang et al.
Summary: The development of a smart city is greatly facilitated by the evolution of artificial intelligence of things (AIoT), and the iCUPE intelligent piezoelectric AIoT node presented in this study integrates energy harvesting and self-powered sensing modules to effectively respond to vibrational energy sources from different directions. The intelligent sensor using machine learning achieves accurate vibration recognition and provides multifunctional accelerometer and gyroscope functions. This research demonstrates the importance of wireless sensor networks in the construction of smart cities.
Article
Engineering, Environmental
Koteeswara Reddy Nandanapalli et al.
Summary: Efficient and durable catalyst-based energy harvesting devices have attracted attention by integrating low-cost materials with low-temperature techniques. A synergistic Oxygen evolution reaction (OER) catalyst was developed by combining ZnO nanorods structures with stainless-steel mesh as three-dimensional (3D) structures, showing excellent water-splitting characteristics, especially after passivation with ultrathin cobalt oxide layers. The established large surface area, fine energy band alignments, and synergistic effects contribute to the enhanced catalytic activity of the electrodes.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Nanoscience & Nanotechnology
Yaqiang Ji et al.
Summary: This paper presents a feasible strategy, called femtosecond laser-activated metal deposition, for low-cost fabrication of metal layers. The method allows for maskless patterning of metals on substrates such as PDMS, and demonstrates advantages compared to previous studies using nanosecond lasers.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Nanoscience & Nanotechnology
Chengchao Xiao et al.
Summary: This study combines laser-induced selective metallization and selective wetting to directly prepare 2D and 3D liquid metal circuits. The prepared liquid metal circuits exhibit strong adhesion, good flexibility, self-healing ability, and acid-alkaline resistance, and have great application prospects.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Nanoscience & Nanotechnology
Jin Feng et al.
Summary: A unique pitaya-structured graphene/TiO2@OPS microsphere with dual laser wavelength responses has been designed and prepared. The microsphere shows remarkable performance in both NIR and UV laser direct writing of polymers, thanks to its unique structure. Additionally, the microsphere exhibits outstanding color-changing ability.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Nanoscience & Nanotechnology
Peiren Wang et al.
Summary: The article introduces a novel hybrid additive manufacturing technology, which combines 3D printing and electroless plating, for the fabrication of customized ceramic electronics. By optimizing the laser and plating parameters, functional ceramic electronics with high conductivity are achieved, demonstrating the potential of this technology.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Nanoscience & Nanotechnology
Haoran Xu et al.
Summary: This study reported a new laser activator (MoO3) that is suitable for both UV and NIR lasers for selective metallization on polymers. It revealed a different autocatalytic mechanism of MoO3 for electroless copper plating and demonstrated the better quality of copper layer prepared using UV laser. The proposed strategy is easy for industrial applications and improves the conductivity and resistance stability of metal layers.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Multidisciplinary Sciences
Wonbeom Lee et al.
Summary: An elastic printed circuit board (E-PCB) is a conductive framework used for the assembly of stretchable electronics. This study presents a method using a liquid metal particle network (LMPNet) as an elastic conductor, which satisfies all the requirements for E-PCBs. The LMPNet enables the fabrication of high-density E-PCBs, allowing the integration of numerous electronic components to create highly stretchable skin electronics.
Editorial Material
Engineering, Environmental
Jonathan Blumenthal et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY
(2022)
Article
Multidisciplinary Sciences
Dengfeng Li et al.
Summary: This study reports a wireless self-sensing and haptic-reproducing electronic skin that enables noncontact touch communication and can be connected with other smart devices for a touch internet of things.
Article
Chemistry, Physical
Yi Xie et al.
Summary: This study demonstrates a novel strategy for scalable fabrication of copper-nickel-polypyrrole micro-supercapacitors (MSCs) through laser-induced selective metallization. The prepared MSCs devices exhibit high capacitance, energy density, and cycling stability. Furthermore, wireless charging of the MSCs device can be achieved by designing a wireless charging coil.
ENERGY STORAGE MATERIALS
(2022)
Article
Engineering, Environmental
Shuai Zhang et al.
Summary: With the acceleration of urbanization, energy-efficient, comfortable, and lightweight materials have been widely used. This paper develops a sensitive and durable fire alarm intelligent coating strategy based on a metal-insulator transitional Ti3O5, and elucidates its atomic and electronic structure. The coating demonstrates a sensitive fire response time and excellent response repeatability, as well as remarkable flame retardancy, smoke suppression, and weatherability.
CHEMICAL ENGINEERING JOURNAL
(2022)
Review
Chemistry, Physical
Yanfei Zheng et al.
Summary: This study provides a comprehensive review of recent progress in oxygen vacancy engineering for designing catalytic materials for VOCs treatment. It discusses the construction strategy, structural characterization, and catalytic effects of oxygen vacancies, as well as forecasts technical challenges and prospects. The perspectives provided in this study could potentially contribute to guiding the synthesis of efficient catalysts for VOCs degradation and understanding their mechanisms.
JOURNAL OF MATERIALS CHEMISTRY A
(2022)
Article
Multidisciplinary Sciences
Dan Zhao et al.
Summary: Propane dehydrogenation to propene is an important industrial process, but current commercial catalysts often suffer from toxicity or ecological concerns. A new environmentally friendly catalyst based on ZnO has been developed, showing higher propene productivity and selectivity compared to traditional catalysts.
Article
Chemistry, Multidisciplinary
Yan Wang et al.
Summary: The Marine Internet of Things (MIoT) is composed of marine distributed sensors and highly reliant on batteries. A flexible seaweed-like triboelectric nanogenerator (S-TENG) capable of utilizing wave energy has been proposed to provide in situ power supply. The bending and recovering of the S-TENG structure under wave excitations can be converted to electricity, making it a potential effective approach for achieving a battery independent MIoT.
Review
Materials Science, Ceramics
Vitaly Gurylev et al.
Summary: Defects in zinc oxide (ZnO) play a crucial role in influencing its properties and applications, with potential for improved characteristics through the introduction of oxygen and zinc vacancies. Defective ZnO shows broad application potential in nanoscale devices, yet faces challenges and requires further research for in-depth exploration.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
(2021)
Article
Multidisciplinary Sciences
Yuxin Yang et al.
Summary: This study introduces a non-printed integrated-circuit textile (NIT) that can be used for biomedical and theranostic applications, woven through a unique method. The woven circuit textile is self-powered and capable of wireless biomedical monitoring, suggesting a potential future in wearable health monitoring technologies.
NATURE COMMUNICATIONS
(2021)
Article
Chemistry, Multidisciplinary
Luyao Ma et al.
Summary: This study introduces a method for monitoring antimicrobial resistance of foodborne pathogens using IoT technology, achieving high accuracy in bacterial classification and monitoring through color sensors and neural networks. The results show a high level of consistency with traditional methods. This method is rapid, cost-effective, and portable, making it effective for monitoring and mitigating the risk of bacterial antimicrobial resistance in the agri-food chain.
Review
Chemistry, Physical
John Lama et al.
Summary: Textile-based TENGs (tTENGs) integrate biomonitoring technology offering a cost-effective, breathable, and comfortable option for daily wear, widely applied in areas such as cardiovascular, respiratory, motion, and sleep monitoring, with a significant impact on personalized healthcare.
JOURNAL OF MATERIALS CHEMISTRY A
(2021)
Review
Chemistry, Physical
Lei Zhang et al.
Summary: The review presents the synthetic strategies for oxygen defect-SACs and highlights the relationship between oxygen defects and the stability of metal species. Additionally, characterization methods of oxygen vacancies and recent applications of SACs are summarized.
JOURNAL OF MATERIALS CHEMISTRY A
(2021)
Review
Chemistry, Multidisciplinary
Chuhong Zhang et al.
Summary: 3D printing technology is revolutionary due to its customizability and multidimensional functionality, but the lack of functional polymeric materials limits its development. The physical properties of polymeric materials must match the printing process, restricting the selection of printable materials. Challenges in large-scale production further hinder the development of the 3D printing industry.
Review
Chemistry, Multidisciplinary
Xiaopei Zhang et al.
Summary: The rapid development of wearable electronics has increased the demand for functional fiber devices. Research on fiber components for energy storage and conversion, actuating, and sensing functions is gaining attention. Through advancements in fiber material preparation, innovative structure design, and device performance, integrated fiber electronics are expected to have a wide range of applications in next-generation smart systems.
Review
Chemistry, Multidisciplinary
Wei Shi et al.
ADVANCED MATERIALS
(2020)
Article
Engineering, Environmental
Sabryna I. G. Costa et al.
CHEMICAL ENGINEERING JOURNAL
(2020)
Article
Chemistry, Multidisciplinary
Liyang Jia et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
(2020)
Article
Materials Science, Composites
Huiyuan Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY
(2020)
Review
Chemistry, Multidisciplinary
Michael Mayer et al.
Article
Chemistry, Multidisciplinary
Chunfeng Wang et al.
Article
Chemistry, Multidisciplinary
Ruihao Chen et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2019)
Article
Nanoscience & Nanotechnology
Jihai Zhang et al.
ACS APPLIED MATERIALS & INTERFACES
(2019)
Article
Nanoscience & Nanotechnology
Hasan Goktas et al.
Article
Chemistry, Physical
Hyung-Seok Kim et al.
Article
Chemistry, Physical
Tridip Das et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2017)
Article
Chemistry, Multidisciplinary
Jihai Zhang et al.
ADVANCED MATERIALS INTERFACES
(2017)
Article
Engineering, Multidisciplinary
Jong-uk Yang et al.
COMPOSITES PART B-ENGINEERING
(2017)
Article
Nanoscience & Nanotechnology
Jihai Zhang et al.
ACS APPLIED MATERIALS & INTERFACES
(2016)
Article
Nanoscience & Nanotechnology
Jihai Zhang et al.
ACS APPLIED MATERIALS & INTERFACES
(2016)
Article
Materials Science, Multidisciplinary
Weifeng Yang et al.
Article
Chemistry, Multidisciplinary
Xiangwen Liu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2009)