☆ 4.7 Article

Physics-guided diagnosis framework for bridge health monitoring using raw vehicle accelerations

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2024)

Related references

Note: Only part of the references are listed.

Article Engineering, Multidisciplinary

Roadmap on measurement technologies for next generation structural health monitoring systems

Simon Laflamme et al.

Summary: Structural health monitoring (SHM) is the automation of assessing the condition of engineered systems. The challenge lies in designing cost-effective sensing solutions for large components or structures, and the implementation of these solutions is still limited due to economic and technical challenges.

MEASUREMENT SCIENCE AND TECHNOLOGY (2023)

Add to Collection

Article Engineering, Mechanical

Structural damage detection based on transfer learning strategy using digital twins of bridges

Shuai Teng et al.

Summary: In this paper, a novel structural damage detection method based on digital twin and transfer learning was proposed. By using the digital twin technology, a large number of damage samples of numerical models were obtained to train a pre-trained convolutional neural network (CNN). Then, the pre-trained CNN was transferred to experimental tested structures and real bridge structures using transfer learning. The results showed that the CNN trained by digital twin models had strong compatibility, and with the combination of transfer learning, the performance of the CNN was significantly improved for experimental structures and real bridge structures.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

Add to Collection

Article Engineering, Mechanical

Extraction of bridge mode shapes from the response of a two-axle passing vehicle using a two-peak spectrum idealized filter approach

Junyong Zhou et al.

Summary: Bridge mode shape is crucial for assessing the structural health of bridges. This study proposes a novel approach to extract bridge mode shapes from the response of a passing vehicle and verifies its feasibility through experiments.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

Add to Collection

Article Chemistry, Physical

A Time-Domain Signal Processing Algorithm for Data-Driven Drive-by Inspection Methods: An Experimental Study

Yifu Lan et al.

Summary: A novel time-domain signal processing algorithm is proposed for the raw vehicle acceleration data of data-driven drive-by inspection methods. The algorithm can overcome the difficulties in the application of drive-by methods and greatly improve the accuracy and efficiency of Machine Learning models in vehicle-based damage detection. Experimental results show that the algorithm can increase the average accuracy by 12.2-15.0% and the average efficiency by 35.7-96.7% compared to using raw data.

MATERIALS (2023)

Add to Collection

Article Chemistry, Physical

Investigation of Frequency-Domain Dimension Reduction for A2M-Based Bridge Damage Detection Using Accelerations of Moving Vehicles

Zhenkun Li et al.

Summary: In recent decades, there has been increased interest in monitoring bridge health using vehicle vibrations. However, existing studies face challenges in practical engineering applications due to their reliance on constant speeds or tuning vehicular parameters. This paper proposes a novel machine-learning-based method called the assumption accuracy method (A(2)M), which does not require labeled data for damage scenarios and utilizes full-band vehicle responses to improve accuracy in detecting bridge damage. The use of dimension-reduction techniques such as principal component analysis (PCA) and Mel-frequency cepstral coefficients (MFCCs) further enhances the effectiveness of the method.

MATERIALS (2023)

Add to Collection

Article Engineering, Civil

Diagnosis algorithms for indirect bridge health monitoring via an optimized AdaBoost-linear SVM

Yifu Lan et al.

Summary: A data-driven approach based on Optimized AdaBoost-Linear SVM is proposed to indicate bridge damage using only raw vibration signals received from a vehicle passing over the bridge. Laboratory experiments are conducted to establish a dataset and train the algorithm to identify bridge health states. The algorithm has better performance than other commonly used algorithms, improving result accuracy by 5% to 16.7%.

ENGINEERING STRUCTURES (2023)

Add to Collection

Article Engineering, Civil

Indirect damage detection for bridges using sensing and temporarily parked vehicles

Zhenkun Li et al.

Summary: This paper proposes an indirect approach to localize and quantify bridge damage using sensing and parked vehicles. Equations for back-calculating residual contact-point responses of the sensing vehicle are deduced to eliminate its self-frequencies. Another temporarily parked truck is introduced to increase the amount of modal information about the bridge and its sensitivity to local damage, and a novel objective function based on indirectly identified frequencies is used to enhance the robustness of damage detection.

ENGINEERING STRUCTURES (2023)

Add to Collection

Article Engineering, Mechanical

High-fidelity time-series data synthesis based on finite element simulation and data space mapping

Youqi Zhang et al.

Summary: Dynamic responses can provide rich information for supporting the entire life cycle of structures. This study proposed a data synthesis method using FE simulation and deep learning space mapping to synthesize high-fidelity dynamic responses. Vibration experiments were conducted on an I-shaped steel beam and the corresponding FE model, demonstrating the effectiveness of the proposed method.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

Add to Collection

Article Engineering, Civil

Bridge frequency identification in city bus monitoring: A coherence-PPI algorithm

Yifu Lan et al.

Summary: This study proposes a novel algorithm based on Bayesian framework to extract bridge frequencies using drive-by measurements. Unlike previous studies, this method encourages the introduction of variability to filter bridge frequencies, making it particularly compelling for practical engineering applications.

ENGINEERING STRUCTURES (2023)

Add to Collection

Article Engineering, Civil

Recent Advances in Researches on Vehicle Scanning Method for Bridges

Z. L. Wang et al.

Summary: The vehicle scanning method (VSM) is an indirect approach for bridge measurement that does not require sensors to be mounted on the bridge but only on the test vehicle. It has been extensively applied in various aspects of bridge measurement, such as construction of mode shapes, identification of damping ratios, and detection of damages. The indirect method offers advantages in terms of mobility, economy, and efficiency compared to the conventional direct method. The VSM has seen significant growth in research, with lab experiments, field tests, and the incorporation of modern devices enhancing its capabilities.

INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS (2022)

Add to Collection

Article Construction & Building Technology

BIM-based task and motion planning prototype for robotic assembly of COVID-19 hospitalisation light weight structures

Yifan Gao et al.

Summary: The fast transmission of COVID-19 has caused many construction projects to halt, but robotic platforms can ensure essential construction tasks are not suspended by performing unmanned construction.

AUTOMATION IN CONSTRUCTION (2022)

Add to Collection

Article Engineering, Civil

Smartphone-based bridge monitoring through vehicle-bridge interaction: analysis and experimental assessment

Alberto Di Matteo et al.

Summary: This study presents the results of an experimental campaign on the applicability of a smartphone-based technique for bridge monitoring. The vehicle-bridge interaction (VBI)-based approach is used to estimate the natural frequencies of bridges, with the aim of developing a low-cost and widely applicable infrastructure monitoring system. The results demonstrate that smartphone sensors can reliably record the accelerations of vehicles on bridges for determining the modal properties of the bridge.

JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2022)

Add to Collection

Article Construction & Building Technology

Vision-based modal analysis of built environment structures with multiple drones

Michele Bolognini et al.

Summary: This study explores the use of multiple drones to estimate the natural frequencies and modal shapes of a structure by synchronizing their measurements. The method is able to detect variations in modal parameters and identify anomalies in the structure. Experimental results suggest that the approach is highly accurate and can support autonomous, multi-drone applications in the inspection of the built environment.

AUTOMATION IN CONSTRUCTION (2022)

Add to Collection

Article Engineering, Civil

General contact response of single-axle two-mass test vehicles for scanning bridge frequencies considering suspension effect

H. Xu et al.

Summary: This paper derives a general formula for the contact response of a single-axle, two-mass test vehicle considering the suspension effect, which can be applied to various beam-type bridges. The use of vehicle-bridge contact response can overcome the problem of bridge frequencies being masked by the vehicle's self frequencies. Closed-form solutions for the vehicle's body, wheel, and contact responses are newly derived, treating the test vehicle as a two degree-of-freedom model with suspension effect. The parametric study shows that the proposed formula is more effective for frequency extraction compared to the vehicle response, and the contact response is able to detect the first few frequencies of the bridge.

ENGINEERING STRUCTURES (2022)

Add to Collection

Review Engineering, Civil

A review of mobile sensing of bridges using moving vehicles: Progress to date, challenges and future trends

Abdollah Malekjafarian et al.

Summary: Sensors installed on moving vehicles have been extensively used for condition monitoring and structural assessment of bridges. These methods rely on measuring dynamic responses on passing vehicles to identify the bridge's dynamic characteristics and assess its structural condition. The critical advantage of these methods is the ability to monitor multiple bridges in a transport network at a relatively lower cost.

STRUCTURES (2022)

Add to Collection

Article Engineering, Civil

Deep autoencoder architecture for bridge damage assessment using responses from several vehicles

Muhammad Zohaib Sarwar et al.

Summary: This study evaluates the feasibility of an indirect bridge monitoring system through numerical investigation, where a deep autoencoder model is trained using vertical acceleration responses from multiple vehicles passing over a healthy bridge. The reconstruction error of damaged signals is shown to be sensitive when considering the distribution of results from multiple vehicle-crossing events. Damage is quantified using a damage index based on the Kullback-Leibler divergence, evaluating changes in reconstruction error distributions.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Computer Science, Artificial Intelligence

Perturbation-based methods for explaining deep neural networks: A survey

Maksims Ivanovs et al.

Summary: Deep neural networks have achieved state-of-the-art results in tasks dealing with perceptual data, but their black box nature hinders their full-scale application in safety-critical areas. In response to this, the field of explainable artificial intelligence has emerged. This survey focuses on perturbation-based XAI methods, exploring how these methods are applied to different data types.

PATTERN RECOGNITION LETTERS (2021)

Add to Collection

Article Engineering, Civil

Transmissibility performance assessment for drive-by bridge inspection

M. Makki Alamdari et al.

Summary: This paper introduces a novel metric based on transmission performance between a vehicle and a bridge, with higher sensitivity index vehicles showing superior performance in identifying bridge frequencies. Experimental validation shows successful identification of the first three vibration modes of the bridge under constant slow speed, highlighting the potential for real-world application in drive-by bridge inspection systems.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Engineering, Mechanical

A kNN algorithm for locating and quantifying stiffness loss in a bridge from the forced vibration due to a truck crossing at low speed

Kun Feng et al.

Summary: This paper presents a k-Nearest Neighbours (kNN) algorithm for locating and quantifying bridge damage based on the time-varying forced frequencies due to a moving truck. The algorithm utilizes eigenvalue analysis and a vast sample of patterns generated to determine the location and severity of the damage. Field measurements are simulated using dynamic transient analysis for theoretical testing purposes.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Review Engineering, Multidisciplinary

Wireless sensor network for structural health monitoring: A contemporary review of technologies, challenges, and future direction

Mohammed Abdulkarem et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2020)

Add to Collection

Article Engineering, Civil

Measuring bridge frequencies by a test vehicle in non-moving and moving states

Y. B. Yang et al.

ENGINEERING STRUCTURES (2020)

Add to Collection

Article Engineering, Mechanical

Diagnosis algorithms for indirect structural health monitoring of a bridge model via dimensionality reduction

Jingxiao Liu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Add to Collection

Article Engineering, Civil

Towards smart cities: crowdsensing-based monitoring of transportation infrastructure using in-traffic vehicles

Qipei Mei et al.

JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2020)

Add to Collection

Proceedings Paper Acoustics

DAMAGE-SENSITIVE AND DOMAIN-INVARIANT FEATURE EXTRACTION FOR VEHICLE-VIBRATION-BASED BRIDGE HEALTH MONITORING

Jingxiao Liu et al.

2020 IEEE INTERNATIONAL CONFERENCE ON ACOUSTICS, SPEECH, AND SIGNAL PROCESSING (2020)

Add to Collection

Article Engineering, Mechanical

Indirect health monitoring of bridges using Mel-frequency cepstral coefficients and principal component analysis

Qipei Mei et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Engineering, Civil

Experimental monitoring of bridge frequency evolution during the passage of vehicles with different suspension properties

Daniel Cantero et al.

ENGINEERING STRUCTURES (2019)

Add to Collection

Article Chemistry, Analytical

A Machine Learning Approach to Bridge-Damage Detection Using Responses Measured on a Passing Vehicle

Abdollah Malekjafarian et al.

SENSORS (2019)

Add to Collection

Article Engineering, Civil

Automated real-time damage detection strategy using raw dynamic measurements

Rhara de Almeida Cardoso et al.

ENGINEERING STRUCTURES (2019)

Add to Collection

Article Acoustics

Indirect bridge modal parameters identification with one stationary and one moving sensors and stochastic subspace identification

Jiantao Li et al.

JOURNAL OF SOUND AND VIBRATION (2019)

Add to Collection

Article Materials Science, Characterization & Testing

Simulated Road Profiles According to ISO 8608 in Vibration Analysis

P. Mucka

JOURNAL OF TESTING AND EVALUATION (2018)

Add to Collection

Review Engineering, Civil

State-of-the-Art Review on Modal Identification and Damage Detection of Bridges by Moving Test Vehicles

Y. B. Yang et al.

INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS (2018)

Add to Collection

Article Engineering, Civil

Bridge natural frequency estimation by extracting the common vibration component from the responses of two vehicles

T. Nagayama et al.

ENGINEERING STRUCTURES (2017)

Add to Collection

Article Engineering, Mechanical

A discussion on the merits and limitations of using drive-by monitoring to detect localised damage in a bridge

David Hester et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

Add to Collection

Article Construction & Building Technology

A mode shape-based damage detection approach using laser measurement from a vehicle crossing a simply supported bridge

Eugene J. OBrien et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2016)

Add to Collection

Article Construction & Building Technology

Drive-by damage detection in bridges using the apparent profile

E. J. OBrien et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2015)

Add to Collection

Proceedings Paper Engineering, Aerospace

Mitigating the effects of variable speed on drive-by infrastructure monitoring

Andrew Thorsen et al.

SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2015 (2015)

Add to Collection

Article Engineering, Civil

Identification of bridge mode shapes using Short Time Frequency Domain Decomposition of the responses measured in a passing vehicle

A. Malekjafarian et al.

ENGINEERING STRUCTURES (2014)

Add to Collection

Article Engineering, Civil

Drive-by bridge inspection from three different approaches

C. W. Kim et al.

SMART STRUCTURES AND SYSTEMS (2014)

Add to Collection

Article Engineering, Civil

A drive-by inspection system via vehicle moving force identification

E. J. OBrien et al.

SMART STRUCTURES AND SYSTEMS (2014)

Add to Collection

Article Engineering, Multidisciplinary

The use of a dynamic truck-trailer drive-by system to monitor bridge damping

Jennifer Keenahan et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2014)

Add to Collection

Article Engineering, Civil

Development of practical health monitoring system for short-and medium-span bridges based on vibration responses of city bus

Ayaho Miyamoto et al.

JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2012)

Add to Collection

Article Instruments & Instrumentation

Theoretical investigation of the use of a moving vehicle to identify bridge dynamic parameters

P. J. McGetrick et al.

INSIGHT (2009)

Add to Collection

Article Engineering, Civil

Dynamic responses of a two-span beam subjected to high speed 2DOF sprung vehicles

Pritsathat Seetapan et al.

INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS (2006)

Add to Collection

Article Engineering, Civil

Effect of vehicle velocity on the dynamic amplification of a vehicle crossing a simply supported bridge

Sean P. Brady et al.

JOURNAL OF BRIDGE ENGINEERING (2006)

Add to Collection

Article Engineering, Civil

Use of a passing vehicle to scan the fundamental bridge frequencies: An experimental verification

CW Lin et al.

ENGINEERING STRUCTURES (2005)

Add to Collection

Article Acoustics

Vehicle-bridge interaction dynamics and potential applications

YB Yang et al.

JOURNAL OF SOUND AND VIBRATION (2005)

Add to Collection

Article Acoustics

Extracting bridge frequencies from the dynamic response of a passing vehicle

YB Yang et al.

JOURNAL OF SOUND AND VIBRATION (2004)

Add to Collection

Article Computer Science, Artificial Intelligence

Laplacian eigenmaps for dimensionality reduction and data representation

M Belkin et al.

NEURAL COMPUTATION (2003)

Add to Collection

Article Acoustics

Simplified models for the location of cracks in beam structures using measured vibration data

JK Sinha et al.

JOURNAL OF SOUND AND VIBRATION (2002)

Add to Collection

Article Multidisciplinary Sciences

A global geometric framework for nonlinear dimensionality reduction

JB Tenenbaum et al.

SCIENCE (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.