Related references
Note: Only part of the references are listed.Heat dissipation design of end winding of permanent magnet synchronous motor for electric vehicle
Li Ye et al.
ENERGY REPORTS (2023)
Optimization of oil flow distribution inside the in-wheel motor assembly of electric vehicles for improved thermal performance
Arslan Saleem et al.
APPLIED THERMAL ENGINEERING (2022)
Electromagnetic thermal coupling analysis for a novel cooling system of an axial flux hub motor
Jiujian Chang et al.
IET ELECTRIC POWER APPLICATIONS (2022)
A Performance Evaluation of Three-Phase Induction Electric Motors between 1945 and 2020
Danilo Ferreira de Souza et al.
ENERGIES (2022)
Numerical Analysis of Wick-Type Two-Phase Mechanically Pumped Fluid Loop for Thermal Control of Electric Aircraft Motors
Xinyu Chang et al.
ENERGIES (2022)
Total CO2-equivalent life-cycle emissions from commercially available passenger cars
Johannes Buberger et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)
Development of an external rotor surface permanent magnet machine with high continuous torque density
Ye Li et al.
ENERGY REPORTS (2022)
Thermal Performance Improvement by Rotating Thermosyphon Loop in Rotor of an Interior Permanent Magnet Synchronous Electric Motor
Pey Shey Wu et al.
INVENTIONS (2022)
Comparison of electro-thermal performance of advanced cooling techniques for electric vehicle motors
Amitav Tikadar et al.
APPLIED THERMAL ENGINEERING (2021)
Smart Cooling System Design for Augmentation of Cooling Performance of Electric Vehicle Driving Motor Utilizing Cooling Channel Fin
Si-Mok Park et al.
Journal of the Korean Society for Precision Engineering (2021)
A review on methods of finding losses and cooling methods to increase efficiency of electric machines
Edison Gundabattini et al.
AIN SHAMS ENGINEERING JOURNAL (2021)
A new phase-change cooling method for the frequent start-stop electric motor
Xiangyang Liu et al.
APPLIED THERMAL ENGINEERING (2021)
A passive cooling design for an aircraft electromechanical actuator by using heat pipes
Wenlei Lian et al.
APPLIED THERMAL ENGINEERING (2021)
Reliability study of motor controller in electric vehicle by the approach of fault tree analysis
Xiong Shu et al.
ENGINEERING FAILURE ANALYSIS (2021)
Improvement of Traction Motor Performance for Electric Vehicles Using Conductors With Insulation of High Thermal Conductivity Considering Cooling Methods
Thanh Anh Huynh et al.
IEEE TRANSACTIONS ON MAGNETICS (2021)
Heat Dissipation of Three Permanent Magnet Synchronous Motors Integrated with Heat Pipes
Xiaowu Wang et al.
INTERNATIONAL JOURNAL OF THERMOPHYSICS (2021)
Thermal performance of a R600a two-phase loop thermosiphon in rotational shaft
Fajing Li et al.
HEAT AND MASS TRANSFER (2021)
Direct Oil Cooling of End-Windings in Torus-Type Axial-Flux Permanent-Magnet Machines
Federico Marcolini et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2021)
Research on energy saving and thermal management of high-efficiency and high-voltage motor based on fluid network decoupling
Mengmeng Ai et al.
ENERGY REPORTS (2021)
Heat dissipation analysis and multi-objective optimization of a permanent magnet synchronous motor using surrogate assisted method
Yongsheng Li et al.
CASE STUDIES IN THERMAL ENGINEERING (2021)
A Novel Stator Cooling Structure for Yokeless and Segmented Armature Axial Flux Machine with Heat Pipe
Wei Le et al.
ENERGIES (2021)
Additively Manufactured Hollow Conductors Integrated With Heat Pipes: Design Tradeoffs and Hardware Demonstration
Fan Wu et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2021)
Fatigue life prediction of Electric RaceAbout (ERA) traction motor rotor
Sanjin Braut et al.
4TH INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY AND DURABILITY (ICSID 2020) (2021)
Thermal capability of electric vehicle PMSM with different slot areas via thermal network analysis
Emma Arfa Grunditz et al.
ETRANSPORTATION (2021)
Improvement on the heat dissipation of permanent magnet synchronous motor using heat pipe
Zhenping Wan et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2020)
Self-circulation cooling structure design of permanent magnet machines for electric vehicle
Ming Kang et al.
APPLIED THERMAL ENGINEERING (2020)
Performance evaluation of an electric vehicle thermal management system with waste heat recovery
Zhen Tian et al.
APPLIED THERMAL ENGINEERING (2020)
On Heat Transfer Performance of Cooling Systems Using Nanofluid for Electric Motor Applications
Ali Deris Zadeh et al.
ENTROPY (2020)
Wound field synchronous motor with hybrid circuit for neighborhood electric vehicle traction improving fuel economy
Kyoung-Soo Cha et al.
APPLIED ENERGY (2020)
Experimental and numerical investigation on a novel heat pipe based cooling strategy for permanent magnet synchronous motors
Yalong Sun et al.
APPLIED THERMAL ENGINEERING (2020)
Hybrid electric vehicle electric motors for optimum energy efficiency: A computationally efficient design
Dong Wei et al.
ENERGY (2020)
Configuration, design, and optimization of air-cooled battery thermal management system for electric vehicles: A review
A. Hakeem Akinlabi et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)
Cooling of Windings in Electric Machines via 3-D Printed Heat Exchanger
William Sixel et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2020)
A comprehensive review of future thermal management systems for battery-electrified vehicles
Joris Jaguemont et al.
JOURNAL OF ENERGY STORAGE (2020)
Efficiency improvement of permanent magnet synchronous motor for electric vehicles
Yang Yang et al.
ENERGY (2020)
Innovated Approach of Predictive Thermal Management for High-Speed Propulsion Electric Machines in More Electric Aircraft
Tenghui Dong et al.
IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2020)
Thermal management analysis using heat pipe in the high current discharging of lithium-ion battery in electric vehicles
Hamidreza Behi et al.
JOURNAL OF ENERGY STORAGE (2020)
Improved hotspot monitoring method for thermal management system of automotive traction motor
Tenghui Dong et al.
IET ELECTRIC POWER APPLICATIONS (2020)
Cooling of Automotive Traction Motors: Schemes, Examples, and Computation Methods
Yaohui Gai et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2019)
Improved Thermal Management and Analysis for Stator End-Windings of Electrical Machines
Vincenzo Madonna et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2019)
Applicability study of the potting material based thermal management strategy for permanent magnet synchronous motors
Yalong Sun et al.
APPLIED THERMAL ENGINEERING (2019)
Review on battery thermal management system for electric vehicles
Jaewan Kim et al.
APPLIED THERMAL ENGINEERING (2019)
Study of thermal stresses developed during a fatigue test on an electrical motor rotor cage
Vicente Climente-Alarcon et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
The impact of demagnetization on the feasibility of permanent magnet synchronous motors in industry applications
A. A. Adly et al.
JOURNAL OF ADVANCED RESEARCH (2019)
Design and optimization of dual-cycled cooling structure for fully-enclosed permanent magnet motor
Wei Chen et al.
APPLIED THERMAL ENGINEERING (2019)
Thermal characteristics and effects of oil spray cooling on in-wheel motors in electric vehicles
Myeong Hyeon Park et al.
APPLIED THERMAL ENGINEERING (2019)
Thermal management integrated with three-dimensional heat pipes for air-cooled permanent magnet synchronous motor
Guoyun Fang et al.
APPLIED THERMAL ENGINEERING (2019)
Assessment of Different Cooling Techniques for Reduced Mechanical Stress in the Windings of Electrical Machines
Bishal Silwal et al.
ENERGIES (2019)
A Hybrid Electric Vehicle Motor Cooling System-Design, Model, and Control
Junkui Huang et al.
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2019)
Direct Liquid Cooling Method Verified With a Permanent-Magnet Traction Motor in a Bus
Pia Lindh et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2019)
Numerical and experimental analysis of heat dissipation intensification from electric motor
B. Melka et al.
ENERGY (2019)
Market entry strategies for electric vehicle start-ups in the automotive industry - Lessons from Tesla Motors
V. J. Thomas et al.
JOURNAL OF CLEANER PRODUCTION (2019)
A review of Energy Efficiency Measures Within Electric Motors Systems
Andrea Trianni et al.
INNOVATIVE SOLUTIONS FOR ENERGY TRANSITIONS (2019)
Air inlet/outlet arrangement for rotor cooling application of axial flux PM machines
A. S. Fawzal et al.
APPLIED THERMAL ENGINEERING (2018)
Experimental investigation of single loop thermosyphons utilized in motorized spindle shaft cooling
Fajing Li et al.
APPLIED THERMAL ENGINEERING (2018)
An innovative natural air-cooling system technique for temperature-rise suppression on the permanent magnet synchronous machines
Pedram Asef et al.
ELECTRIC POWER SYSTEMS RESEARCH (2018)
Three-D Numerical Thermal Analysis of Electric Motor with Cooling Jacket
Zabdur Rehman et al.
ENERGIES (2018)
Design Optimization of a High Torque Density Spoke-Type PM Motor for a Formula E Race Drive Cycle
Alireza Fatemi et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2018)
Design and Optimization of a Novel Wound Field Synchronous Machine for Torque Performance Enhancement
Wenping Chai et al.
ENERGIES (2018)
CFD analyses of a radial fan for electric motor cooling
E. Galloni et al.
THERMAL SCIENCE AND ENGINEERING PROGRESS (2018)
Thermal performance of Pulsating Heat Pipe on Electric Motor as Cooling Application
Nurhalimah Aprianingsih et al.
3RD INTERNATIONAL TROPICAL RENEWABLE ENERGY CONFERENCE SUSTAINABLE DEVELOPMENT OF TROPICAL RENEWABLE ENERGY (I-TREC 2018) (2018)
Water Cold Plates Cooling in a Permanent Magnet Synchronous Motor
Aurelie Fasquelle et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2017)
Fan Performance Analysis for Rotor Cooling of Axial Flux Permanent Magnet Machines
Ahmad Syahid Fawzal et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2017)
Thermal performance analysis of a 30 kW switched reluctance motor
Han-Chieh Chiu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
A review on battery thermal management in electric vehicle application
Guodong Xia et al.
JOURNAL OF POWER SOURCES (2017)
Modeling of Motor-Spindel Thermal Values
L. Nikitina
INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING (ICIE 2017) (2017)
Electric motor thermal management system using L-shaped flat heat pipes
Nandy Putra et al.
APPLIED THERMAL ENGINEERING (2017)
Fully predictive heat transfer coefficient modeling of an axial flux permanent magnet synchronous machine with geometrical parameters of the magnets
Alireza Rasekh et al.
APPLIED THERMAL ENGINEERING (2017)
Effect of air-gap fans on cooling of windings in a large-capacity, high-speed induction motor
Chiwon Kim et al.
APPLIED THERMAL ENGINEERING (2016)
Development of an interior permanent magnet motor through rotor cooling for electric vehicles
Kea-Ho Lee et al.
APPLIED THERMAL ENGINEERING (2016)
Transient cooling effect analyses for a permanent-magnet synchronous motor with phase-change-material packaging
Shengnan Wang et al.
APPLIED THERMAL ENGINEERING (2016)
Numerical simulation and experimental verification of heat transfer from a finned housing of an electric motor
Miroslaw Grabowski et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Experimental investigation of the thermal control effects of phase change material based packaging strategy for on-board permanent magnet synchronous motors
Ji-Xiang Wang et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Direct Liquid Cooling in Low-Power Electrical Machines: Proof-of-Concept
Pia M. Lindh et al.
IEEE TRANSACTIONS ON ENERGY CONVERSION (2016)
Experimental study of oil cooling systems for electric motors
Tanguy Davin et al.
APPLIED THERMAL ENGINEERING (2015)
Heat-transfer improvements in an axial-flux permanent-magnet synchronous machine
Juha Pyrhonen et al.
APPLIED THERMAL ENGINEERING (2015)
Thermal effects of stator potting in an axial-flux permanent magnet synchronous generator
Mariia Polikarpova et al.
APPLIED THERMAL ENGINEERING (2015)
Hybrid Cooling Method of Axial-Flux Permanent-Magnet Machines for Vehicle Applications
M. Polikarpova et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2015)
Modeling and Investigation of Thermal Characteristics of a Water-Cooled Permanent-Magnet Linear Motor
Qinfen Lu et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2015)
Limitations/capabilities of electric machine technologies and modeling approaches for electric motor design and analysis in plug-in electric vehicle applications
Murat Yilmaz
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
Modeling and analysis of switched reluctance generator using finite element method
B. Ganji et al.
AIN SHAMS ENGINEERING JOURNAL (2015)
Numerical study on electromagnetics and thermal cooling of a switched reluctance motor
Jer-Huan Jang et al.
CASE STUDIES IN THERMAL ENGINEERING (2015)
Thermal performance of oil spray cooling system for in-wheel motor in electric vehicles
Dong Hyun Lim et al.
APPLIED THERMAL ENGINEERING (2014)
Condition Monitoring and Diagnostics of Motor and Stator Windings - A Review
G. C. Stone
IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2013)
A Thermal Improvement Technique for the Phase Windings of Electrical Machines
Michael Galea et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2012)
Electrical Motor Drivelines in Commercial All-Electric Vehicles: A Review
Juan de Santiago et al.
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2012)
Research on a novel Rotor Structure Switched Reluctance Motor
Lingquan Zeng et al.
INTERNATIONAL CONFERENCE ON APPLIED PHYSICS AND INDUSTRIAL ENGINEERING 2012, PT A (2012)
Research on Induction Motor for Mini Electric Vehicles
Cheng Shukang et al.
2012 INTERNATIONAL CONFERENCE ON FUTURE ELECTRICAL POWER AND ENERGY SYSTEM, PT A (2012)
Measurement and CFD Prediction of Heat Transfer in Air-Cooled Disc-Type Electrical Machines
David A. Howey et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2011)
Thermal Modeling of a Segmented Stator Winding Design
Rafal Wrobel et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2011)
A Real-Time Thermal Model of a Permanent-Magnet Synchronous Motor
Georgios D. Demetriades et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS (2010)
Radially resolved measurement of stator heat transfer in a rotor-stator disc system
D. A. Howey et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)
Cooling of a permanent magnet electric motor with a centrifugal impeller
Hongmin Li
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)
Design, demonstrations and sustainability impact assessments for plug-in hybrid electric vehicles
Thomas H. Bradley et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)
Computational analysis of temperature rise phenomena in electric induction motors
Y Huai et al.
APPLIED THERMAL ENGINEERING (2003)
Experimental study of the cooling of a closed type electric motor
K Farsane et al.
APPLIED THERMAL ENGINEERING (2000)