Related references
Note: Only part of the references are listed.Stochastic semi-analytical modeling of reinforced filaments for additive manufacturing
E. Polyzos et al.
COMPOSITES PART B-ENGINEERING (2023)
Stochastic modeling of the elastic response of parts produced by material extrusion using ideal voids
E. Polyzos et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2023)
BEM evaluation of surface octahedral strains and internal strain gradients in 3D-printed scaffolds used for bone tissue regeneration
T. V. Gortsas et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2022)
Modeling elastic properties of 3D printed composites using real fibers
E. Polyzos et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)
Analytical model for the estimation of the hygrothermal residual stresses in generally layered laminates
E. Polyzos et al.
ENGINEERING FRACTURE MECHANICS (2021)
Numerical modelling of the elastic properties of 3D-printed specimens of thermoplastic matrix reinforced with continuous fibres
E. Polyzos et al.
COMPOSITES PART B-ENGINEERING (2021)
Additively manufactured continuous carbon fiber-reinforced thermoplastic for topology optimized unmanned aerial vehicle structures
G. D. Goh et al.
COMPOSITES PART B-ENGINEERING (2021)
Importance of Polymer Rheology on Material Extrusion Additive Manufacturing: Correlating Process Physics to Print Properties
Arit Das et al.
ACS APPLIED POLYMER MATERIALS (2021)
Effects of local stress fields around broken fibres on the longitudinal failure of composite materials
Rodrigo P. Tavares et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)
An analytical model to predict stress fields around broken fibres and their effect on the longitudinal failure of hybrid composites
Jose M. Guerrero et al.
COMPOSITE STRUCTURES (2019)
Additive manufacturing of polymer composites: Processing and modeling approaches
A. El Moumen et al.
COMPOSITES PART B-ENGINEERING (2019)
A 3D Progressive Failure Model for predicting pseudo-ductility in hybrid unidirectional composite materials under fibre tensile loading
J. M. Guerrero et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Properties of the Eshelby tensor and existence of the equivalent ellipsoidal inclusion solution
D. M. Barnett et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)
Exploration of specimen geometry and tab configuration for tensile testing exploiting the potential of 3D printing freeform shape continuous carbon fibre-reinforced nylon matrix composites
Lincy Pyl et al.
POLYMER TESTING (2018)
Effective simulation of the mechanics of longitudinal tensile failure of unidirectional polymer composites
Rodrigo P. Tavares et al.
INTERNATIONAL JOURNAL OF FRACTURE (2017)
On weakest link theory and Weibull statistics
Frank W. Zok
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)
Elastomers in large-amplitude oscillatory uniaxial extension
Claudia Dessi et al.
RHEOLOGICA ACTA (2017)
Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers
Rafael Thiago Luiz Ferreira et al.
COMPOSITES PART B-ENGINEERING (2017)
Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures
Garrett W. Melenka et al.
COMPOSITE STRUCTURES (2016)
Mechanics of hybrid polymer composites: analytical and computational study
Rodrigo P. Tavares et al.
COMPUTATIONAL MECHANICS (2016)
A novel online rheometer for elongational viscosity measurement of polymer melts
Thomas Koepplmayr et al.
POLYMER TESTING (2016)
On some controversial issues in effective field approaches to the problem of the overall elastic properties
Igor Sevostianov et al.
MECHANICS OF MATERIALS (2014)
On the shape of effective inclusion in the Maxwell homogenization scheme for anisotropic elastic composites
Igor Sevostianov
MECHANICS OF MATERIALS (2014)
Generalization of Maxwell homogenization scheme for elastic material containing inhomogeneities of diverse shape
Igor Sevostianov et al.
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2013)
Tensile Properties and Weibull Modulus of Some High-Performance Polymeric Fibers
Kimiyoshi Naito
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Is the concept of average shape legitimate, for a mixture of inclusions of diverse shapes?
Igor Sevostianov et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
The effect of gauge length on tensile strength and Weibull modulus of polyacrylonitrile (PAN)- and pitch-based carbon fibers
Kimiyoshi Naito et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Combining self-consistent and numerical methods for the calculation of elastic fields and effective properties of 3D-matrix composites with periodic and random microstructures
S. Kanaun et al.
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2011)
Evaluation of elastic modulus for unidirectionally aligned short fiber composites
Hong Gun Kim et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2009)
Effects of fiber aspect ratio evaluated by elastic analysis in discontinuous composites
Hong Gun Kim
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2008)
A progressive damage model for unidirectional fibre-reinforced composites based on fibre fragmentation.: Part I:: Formulation
A Turon et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Effective elastic properties of matrix composites with transversely-isotropic phases
I Sevostianov et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2005)
Mean-field homogenization of multi-phase thermo-elastic composites: a general framework and its validation
O Pierard et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Miniature universal testing platform: from extensional melt rheology to solid-state deformation behavior
ML Sentmanat
RHEOLOGICA ACTA (2004)
Weibull analysis of the tensile behavior of fibers with geometrical irregularities
YP Zhang et al.
JOURNAL OF MATERIALS SCIENCE (2002)
Explicit cross-property correlations for anisotropic two-phase composite materials
I Sevostianov et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2002)
Micromechanical prediction of ultimate strength of transversely isotropic fibrous composites
ZM Huang
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2001)
Simulation of the mechanical properties of fibrous composites by the bridging micromechanics model
ZM Huang
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
Generalised Mori-Tanaka scheme to model anisotropic damage using numerical Eshelby tensor
F Desrumaux et al.
JOURNAL OF COMPOSITE MATERIALS (2001)
Prediction of the effective damage properties and failure properties of nonlinear anisotropic discontinuous reinforced composites
K Derrien et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2000)
Share Paper
