☆ 4.7 Article

High-entropy zeolitic imidazolate framework for efficient oxidative desulfurization of diesel fuel: Towards complete sulfur removal and valuable sulfone production

FUEL (2024)

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Quantum Informed Machine-Learning Potentials for Molecular Dynamics Simulations of CO2's Chemisorption and Diffusion in Mg-MOF-74

Bowen Zheng et al.

Summary: Metal-organic frameworks (MOFs) are promising materials for gas separation and purification, and the combination of machine learning and atomistic simulation can provide accurate and efficient evaluation of gas adsorption and diffusion in MOFs.

ACS NANO (2023)

Add to Collection
Article Engineering, Chemical

Modulating the active phase structure of NiMo/Al2O3 by La modification for ultra-deep hydrodesulfurization of diesel

Rixin Yan et al.

Summary: A series of mesoporous NiMo/LaAlOx catalysts with different La contents were synthesized using a solvent evaporation-induced self-assembly method. It was found that the incorporation of La affected the electronic structure and morphology of the NiMoS active phase. A lower amount of La resulted in improved catalytic activity by promoting the formation of the Type II NiMoS phase. However, higher La incorporation led to the generation of inactive phases and a decrease in the proportion of the NiMoS active phase.

AICHE JOURNAL (2023)

Add to Collection
Article Chemistry, Inorganic & Nuclear

Design and Synthesis of Amphiphilic Catalyst [C16mim]5VW12O40Br and Its Application in Deep Desulfurization with Superior Cyclability at Room Temperature

Xiao-Xiao Xing et al.

Summary: In this study, a series of catalysts [Cnmim]5VW12O40Br (CnVW12) with different alkyl chain lengths were used for the catalytic oxidation of dibenzothiophene (DBT) and its derivatives at room temperature. The impact of catalyst amount, oxidant, and temperature on the reaction process were investigated. Among them, C16VW12 exhibited higher catalytic performance, achieving 100% conversion and selectivity in 50 minutes with only 10 mg of catalyst. The mechanism study revealed that the hydroxyl radical played a crucial role in the reaction. Furthermore, the use of a polarity strategy resulted in the accumulation of sulfone products with a yield of approximately 84% and 100% purity after 23 cycles in the C16VW12 system.

INORGANIC CHEMISTRY (2023)

Add to Collection
Article Engineering, Environmental

A metal-organic framework (MOF) and graphene oxide (GO) based peroxymonosulfate (PMS) activator applied in pollutant removal

Meiyun Qi et al.

Summary: Fenton-like reactions based on peroxymonosulfate (PMS) are effective for pollutant degradation, and a heterogeneous PMS activator (Zn/Co-MOF@rGO-600) derived from a cobalt-zinc metal-organic framework (MOF) was synthesized. The Zn/Co-MOF@rGO-600 catalyst showed enhanced tetracycline (TC) removal during PMS activation, thanks to the presence of zinc and graphene oxide (GO). The catalyst also exhibited improved morphology and reduced charge transfer resistance. This study provides a new approach to fabricate an effective PMS activator using bimetallic (Zn/Co) MOFs.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2023)

Add to Collection
Article Engineering, Chemical

Enhancing charge transfer efficiency of cerium-iron oxides via Co regulated oxygen vacancies to boost peroxymonosulfate activation for tetracycline degradation

Zihan Qian et al.

Summary: Enhancing charge transfer efficiency and accelerating the redox cycle improve catalysts' ability to activate peroxymonosulfate (PMS). The cobalt regulated cerium-iron oxides (CFOCo) successfully achieved this by reducing particle size, increasing oxygen vacancies, and generating more reactive oxygen species (ROS). CFO-Co exhibited significantly boosted PMS activation and excellent catalytic performance in various conditions, as well as easy catalyst recovery. The introduction of cobalt reduced PMS adsorption energy on the catalyst and promoted ROS production. This work provides a new perspective on the design of PMS-activated catalysts.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

Add to Collection
Article Chemistry, Applied

Designing oxygen vacancy rich mesoporous CeO2 nanorods with co-doped Cd and Ni for synergistic oxidative-hydrogenation desulfurization of transportation fuel oils

Lei Wang et al.

Summary: Photocatalytic oxidative coupled in situ hydrogenation using Cd/Ni-doped CeO2 catalyst was applied for the ultra-deep desulfurization of diesel oil. The catalyst demonstrated high activity and achieved 100% desulfurization of 4,6-DMDBT under visible light irradiation, surpassing many state of the art catalysts. The Cd/Ni@CeO2 catalyst remained highly active after multiple reuses and showed rapid recovery by simple washing and filtration.

FUEL PROCESSING TECHNOLOGY (2023)

Add to Collection
Article Chemistry, Physical

Oxygen vacancy regulation strategy in V-Nb mixed oxides catalyst for enhanced aerobic oxidative desulfurization performance

Haofeng Chen et al.

Summary: This article proposes an oxygen vacancies (OVs) regulation strategy to enhance the catalytic activity of bimetallic oxide for oxidative desulfurization of fuel. By synthesizing V-Nb mixed oxide with different crystal phases, it was found that the tetragonal V-Nb mixed oxide (T-VNbOx) has lower OVs formation energy and larger OVs concentration, leading to significantly improved catalytic activity and cycling stability for ultra-deep oxidative desulfurization.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Add to Collection
Article Engineering, Environmental

An ultra-stable high entropy metal nitride for aerobic oxidative desulfurization and source recovery of aromatic sulfides from fuel oils

Peiwen Wu et al.

Summary: In this study, a high entropy metal nitride (HEN) was designed using a soft-urea-assisted strategy, and it showed excellent activity and stability in the oxidative desulfurization (ODS) reaction. This research contributes to the development of new catalysts with high catalytic activity and excellent stability.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection
Article Engineering, Environmental

High-entropy alloy nanoparticles/biochar as an efficient catalyst for high-performance treatment of organic pollutants

Ling-Zhen Miao et al.

Summary: High entropy alloys (HEA) have unique physical and chemical properties, making them a promising material for various applications. In this study, high entropy alloys/biochar (HEA@BC) were synthesized through waste recycling using alkaline lignin. The HEA@BC exhibited excellent catalytic activity for the degradation of organic pollutants, outperforming pure BC-600 and monometallic catalyst. The study also proposed the degradation pathways for a typical antibiotic pollutant and revealed the reduction of toxicity during the degradation process.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection
Article Engineering, Environmental

High entropy alloy/C nanoparticles derived from polymetallic MOF as promising electrocatalysts for alkaline oxygen evolution reaction

Shiqi Wang et al.

Summary: A facile and scalable approach was reported for synthesizing advanced high entropy alloy catalyst nanoparticles with ultralow OER overpotential and excellent long-term stability in alkaline environment. The catalyst exhibited outstanding performance in water splitting process, attributed to surface reconstruction and high entropy effect.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection
Article Engineering, Environmental

Design and preparation of polyoxometalate-based catalyst [MIMPs]3PMo6W6O40 and its application in deep oxidative desulfurization with excellent recycle performance and low molar O/S ratio

Jian Wang et al.

Summary: A novel polyoxometalate-based ionic liquid salt [MIMPs]3PMo6W6O40 was designed and used as a catalyst in oxidative desulfurization, showing high activity in removing sulfur compounds with a low O/S molar ratio. The catalyst also exhibited excellent recyclability and efficiency in reducing sulfur compounds in real diesel.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection
Article Energy & Fuels

Metal-organic framework encapsulated high-loaded phosphomolybdic acid: A highly stable catalyst for oxidative desulfurization of 4,6-dimethyldibenzothiophene

Shuaishuai Zhou et al.

Summary: Encapsulating phosphomolybdic acid into a metal-organic framework improves the stability and activity of the oxidative desulfurization catalyst, showing excellent performance in treating the most stubborn sulfides in fuel oil. The catalyst can be recycled multiple times and the oxidizing product can be well separated, indicating promising potential for real diesel desulfurization.

FUEL (2022)

Add to Collection
Article Engineering, Chemical

Synergistic Effect of Au-Cu Alloy Nanoparticles on TiO2 for Efficient Aerobic Catalytic Oxidative Desulfurization

Peiwen Wu et al.

Summary: Noble-metal alloy nanoparticles have been successfully engineered with TiO2 support, which not only reduces the consumption of noble metals but also enhances catalytic performance. The AuCu/TiO2 catalyst exhibits high activity for sulfur removal in catalytic oxidative desulfurization of liquid fuels, even in the presence of interferents. The synergistic effect between Au and Cu, achieved by alloying, contributes to the boosted catalytic activity.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2022)

Add to Collection
Article Engineering, Chemical

CO2-Selective mixed matrix membranes of bimetallic Zn/Co-ZIF vs. ZIF-8 and ZIF-67

Mahsa Loloei et al.

Summary: Bimetallic metal-organic frameworks (MOF) have gained attention for their synergic effect and enhanced properties compared to their parent structures. This study reports the synthesis of bimetallic Zn/Co-ZIF and its monometallic counterparts, ZIF-8 and ZIF-67, with a facile and low-cost method. Zn/Co-ZIF showed higher pore volume, BET surface area, and a slightly higher Zn-rich external surface.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection
Article Energy & Fuels

Highly Efficient Catalytic Oxidative Desulfurization of Gasoline Using PMnW11@PANI@CS as a New Inorganic-Organic Hybrid Nanocatalyst

Mohammad Ali Rezvani et al.

Summary: In this study, a new nanocatalyst was successfully synthesized and used in a nanocatalytic oxidative desulfurization process. The results showed that the catalyst was able to effectively remove sulfur compounds from gasoline and exhibited good recyclability.

ENERGY & FUELS (2022)

Add to Collection
Article Chemistry, Physical

High-Entropy Metal-Organic Framework Arrays Boost Oxygen Evolution Electrocatalysis

Shuaishuai Xu et al.

Summary: Integrating multiple metals to form high-entropy materials is an efficient strategy to bring about fantastic physicochemical and electrocatalytic properties. In this study, a high-entropy metal-organic framework (HE-MOF) with five metals (Ni, Co, Fe, Zn, and Mo) was synthesized via a mild solvothermal method. The HE-MOF exhibited a two-dimensional array structure, resulting in enhanced electrical conductivity and mass transport of reactants, intermediates, and products. The electrocatalyst showed excellent electrocatalytic performance and long-term stability.

JOURNAL OF PHYSICAL CHEMISTRY C (2022)

Add to Collection
Article Nanoscience & Nanotechnology

Effective Formation of a Mn-ZIF-67 Nanofibrous Network via Electrospinning: An Active Electrocatalyst for OER in Alkaline Medium

Sam Sankar Selvasundarasekar et al.

Summary: In this study, a bimetallic ZIF system was constructed and nanofibers were obtained using electrospinning technique. The active center for electrocatalytic oxygen evolution reaction was identified as Mn3+ in the Mn-incorporated ZIF-67 nanofibers, with Co2+ ions suppressing the Jahn-Teller distortion. The obtained nanofibers showed promising electrocatalytic performance with low overpotential and high current density.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection
Article Engineering, Environmental

Facile synthesis of black phosphorene via a low melting media assisted ball milling

Fengchen Zhou et al.

Summary: Few-layer phosphorene (FLP) has exceptional physical and chemical properties, and a simple and efficient low melting media-assisted ball milling (LMMBM) approach is developed to prepare FLP in large quantities. The use of liquid medium promotes the slipping/curling of black phosphorus (BP) layers during ball milling. The LMMBM approach also has potential for mass production of other two-dimensional materials.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection
Article Chemistry, Applied

Novel synthesis of highly dispersed molybdenum oxide over nanorods cryptomelane octahedral manganese oxide molecular sieve (MoOx/nanorod-OMS-2) as a high performance catalyst for oxidative desulfurization process

Mohammad Hossein Farghadani et al.

Summary: This study successfully prepared a novel and effective bifunctional heterogeneous catalytic system for the desulfurization process by synthesizing nanorod-OMS-2 and molybdenum oxide catalysts. By controlling the composition and structure of the catalysts, highly dispersed molybdenum oxide species and strong acidic sites were achieved, resulting in improved catalytic activity and stability. The kinetics of the desulfurization reaction and the optimum conditions were investigated, providing a basis for further optimization of catalyst design.

FUEL PROCESSING TECHNOLOGY (2022)

Add to Collection
Review Energy & Fuels

High-Entropy Materials for Water Electrolysis

Xiaomin Xu et al.

Summary: This article presents the application of high-entropy materials in water electrolysis, focusing on their role in catalyzing water-splitting reactions. The article summarizes various design strategies for high-entropy materials, including controlling size and shape, constructing porous structures, engineering defects, etc., to enhance catalytic performance. Additionally, it points out the challenges faced in the field and suggests future perspectives for development.

ENERGY TECHNOLOGY (2022)

Add to Collection
Article Chemistry, Physical

PMo11V polyoxometalate encapsulated into hollow mesoporous carbon spheres: A highly efficient and ultra-stable catalyst for oxidative desulfurization

Shuyan Ma et al.

Summary: A highly efficient and stable catalyst for oxidative desulfurization was synthesized, which exhibited a hollow mesoporous structure and amphiphilicity. This catalyst showed improved catalytic performance and recyclability.

APPLIED SURFACE SCIENCE (2022)

Add to Collection
Review Chemistry, Physical

High-entropy oxide: A future anode contender for lithium-ion battery

Xuefeng Liu et al.

Summary: High-entropy oxides (HEO) show great promise for breaking through performance bottlenecks of conventional anode materials in lithium-ion batteries, providing new impetus for the research and development of electrochemical energy storage materials. Research focuses on phase stability, the role of individual cations, mechanisms for controlling properties, as well as state-of-the-art synthetic strategies and modification approaches.

ECOMAT (2022)

Add to Collection
Article Chemistry, Physical

Rational design of ionic V-MOF with confined Mo species for highly efficient oxidative desulfurization

Shuo Wang et al.

Summary: By adjusting the valence state of metal units, this study successfully generated active species within ionic metal-organic frameworks, which is crucial for the rational design of efficient ionic MOFs.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Add to Collection
Article Engineering, Environmental

Synthesis of yolk-shell magnetic porous organic nanospheres supported Pd catalyst for oxidation of alcohols and Heck reactions

Li Zhang et al.

Summary: Pd nanoparticles supported by yolk-shell magnetic porous organic nanospheres exhibit high catalytic performance and excellent magnetic recyclability, allowing for rapid separation and recovery in various reactions using external magnetic fields.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection
Review Chemistry, Inorganic & Nuclear

Recent advances in bimetallic metal-organic framework as a potential candidate for supercapacitor electrode material

Nadeem Raza et al.

Summary: Metal-organic frameworks (MOFs) have garnered significant attention for their advantageous properties, with bimetallic MOFs (BMOFs) being used to enhance framework properties through combinational effects between different metals. The utility of BMOFs has been greatly expanded in various applications such as supercapacitors (SCs). This review describes methods for preparing BMOFs and their derivatives for constructing diverse BMOF-based SCs, as well as recent advances in the design and production of BMOFs and their derived nanostructures in SC applications.

COORDINATION CHEMISTRY REVIEWS (2021)

Add to Collection
Article Energy & Fuels

Catalytic oxidation desulfurization of silica-gel-supported ionic liquid [Bmim]CoCl3 coupling oxone

Hang Xu et al.

Summary: The silica gel supported ionic liquid ([Bmim]CoCl3) catalyst, prepared using a sol-gel method and coupled with [Bmim]BF4 and oxone, showed high desulfurization efficiency. The catalyst exhibited good recyclability and effective desulfurization performance on three sulfur-containing substances with high sulfur content. The desulfurization mechanism was speculated based on the GC-MS results.

FUEL (2021)

Add to Collection
Article Chemistry, Applied

Phosphomolybdic acid niched in the metal-organic framework UiO-66 with defects: An efficient and stable catalyst for oxidative desulfurization

Cheng Wang et al.

Summary: The study synthesized a composite material of HPMo@UiO-66 and systematically characterized its superior oxidative desulfurization performance. The catalyst 0.5-HPMo@UiO-66-D with defects exhibited the best activity and high reusability.

FUEL PROCESSING TECHNOLOGY (2021)

Add to Collection
Article Engineering, Environmental

Bimetal oxide CuO/Co3O4 derived from Cu ions partly-substituted framework of ZIF-67 for toluene catalytic oxidation

Wenjian Xu et al.

Summary: A bimetal oxide CuO/Co3O4 catalyst was synthesized using a MOF-templated method, showing excellent catalytic performance at low temperatures, good stability, and tolerance to water vapor. The superior performance is attributed to the high dispersion of the two oxides, porous structure, and abundant active oxygen species.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection
Article Engineering, Chemical

Synthesis and Characterization of New Substituted Sandwich-Type Polyoxometalate-Based Inorganic-Organic Hybrid Nanocomposites for Catalytic Oxidative Desulfurization of Real Gasoline

Mohammad Ali Rezvani et al.

Summary: A new FeW/MgO/CS hybrid nanocomposite was synthesized and utilized as a heterogeneous catalyst in catalytic oxidative desulfurization reactions, achieving up to 95% oxidation efficiency for both model liquid fuels and gasoline under mild conditions. The nanocomposite demonstrated excellent sulfur removal properties and reusability, showing potential for the production of clean transportation fuels.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Add to Collection
Article Chemistry, Applied

An Effective Magnetic Catalyst for Oxidative Desulfurization of Model and Real Fuels: Fe3O4/ZIF-8/TiO2

Hossein Kargar et al.

Summary: The research on Fe3O4/ZIF-8/TiO2 composite catalyst demonstrates its efficiency, stability, and easy recovery in oxidative desulfurization process, providing important insights for future industrial applications.

MICROPOROUS AND MESOPOROUS MATERIALS (2021)

Add to Collection
Review Multidisciplinary Sciences

High-entropy materials for catalysis: A new frontier

Yifan Sun et al.

Summary: Entropy plays a crucial role in catalysis, with a focus on understanding the relationship between entropy and reaction pathways. Recent advances in high-entropy materials have sparked interest in exploring entropy-stabilized systems for catalysis, offering opportunities for tailoring structures and properties. Tuning composition and configuration of HEMs introduces untapped opportunities for accessing better catalysts.

SCIENCE ADVANCES (2021)

Add to Collection
Article Energy & Fuels

Extraction desulphurization of fuels using ZIF-8-based porous liquid

Jimin Wu et al.

Summary: The ZIF-8-PILs demonstrated high removal efficiencies for thiophene and benzothiophene under optimal conditions and can be easily recovered and reused due to their stable liquid porous structure. The synergistic effects of electrostatic interactions, hydrogen bonding, and pi-complexation interactions among ILs, ZIF-8, and sulfur compounds contributed to the high removal efficiency. The results suggest that PILs are a new and promising extractant for fuel extraction desulfurization process.

FUEL (2021)

Add to Collection
Article Nanoscience & Nanotechnology

Ultrasound-Assisted Rapid ZIF-8 Synthesis, Porous ZnO Preparation by Heating ZIF-8, and Their Photocatalytic Activity

Pham Dinh Du et al.

Summary: ZIF-8 can be synthesized quickly in methanol with the support of ultrasound and exhibits good photocatalytic activity under UV radiation. Additionally, porous ZnO can be prepared by thermal treatment of ZIF-8, with the ZnO obtained by calcination at 660 degrees C for 5 hours showing the highest photocatalytic activity. However, the photocatalytic efficiency of ZnO samples in degrading methylene blue is lower than that of ZIF-8 samples, indicating that ZIF-8 is an effective photocatalyst for environmental pollution treatment.

JOURNAL OF NANOMATERIALS (2021)

Add to Collection
Article Engineering, Environmental

Co-ZIF-67 encapsulated phosphomolybdic acid as a hybrid catalyst for deep oxidative desulfurization

Mitra Jafarinasab et al.

Summary: A novel HPMo@Co-ZIF-67 composite catalyst was successfully synthesized for the efficient removal of DBTs from fuels, achieving a high ODS efficiency of 98%. The catalyst showed a stable structure with only 5% performance loss after five cycles of use, and no significant HPMo leaching was detected during the ODS treatment.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection
Article Engineering, Environmental

Magnetic metal-organic framework (Fe3O4@ZIF-8) core-shell composite for the efficient removal of Pb(II) and Cu(II) from water

Xue Jiang et al.

Summary: Fe3O4@ZIF-8 core-shell magnetic composite was synthesized and utilized successfully for the removal of Pb2+ and Cu2+ from wastewater. The material showed high adsorption capacity, fast kinetics, and could be reused multiple times, making it a promising candidate for water treatment applications.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection
Article Engineering, Environmental

Can epicatechin gallate increase Cr(VI) adsorption and reduction on ZIF-8?

Xiaohong Hu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Hierarchically Porous Multimetal-Based Carbon Nanorod Hybrid as an Efficient Oxygen Catalyst for Rechargeable Zinc-Air Batteries

Dezhang Ren et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

Boron and Nitride Dual vacancies on Metal-Free Oxygen Doping Boron Nitride as Initiating Sites for Deep Aerobic Oxidative Desulfurization

Li Dai et al.

CHEMCATCHEM (2020)

Add to Collection
Article Chemistry, Applied

MoWFe based catalysts to the oxidative desulfurization of refractory dibenzothiophene compounds: Fe promoting the catalytic performance

Marco A. Alvarez-Amparan et al.

FUEL PROCESSING TECHNOLOGY (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Synergistic Catalysis of the PtCu Alloy on Ultrathin BN Nanosheets for Accelerated Oxidative Desulfurization

Jing He et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection
Article Chemistry, Applied

Synthesis of new nanocomposite based on nanoceramic andmonosubstituted polyoxometalate, PMo11Cd@MnFe2O4, with superior catalytic activity for oxidative desulfurization of real fuel

Mohammad Ali Rezvani et al.

APPLIED ORGANOMETALLIC CHEMISTRY (2020)

Add to Collection
Article Multidisciplinary Sciences

Bulk high-entropy nitrides and carbonitrides

Olivia F. Dippo et al.

SCIENTIFIC REPORTS (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Novel Class of Proton Conducting Materials-High Entropy Oxides

Maria Gazda et al.

ACS MATERIALS LETTERS (2020)

Add to Collection
Review Chemistry, Physical

A comprehensive review on oxidative desulfurization catalysts targeting clean energy and environment

Antony Rajendran et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection
Article Chemistry, Inorganic & Nuclear

Carbon nitride mediated strong metal-support interactions in a Au/TiO2 catalyst for aerobic oxidative desulfurization

Mingyang Liu et al.

INORGANIC CHEMISTRY FRONTIERS (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Entropy-Driven Mechanochemical Synthesis of Polymetallic Zeolitic Imidazolate Frameworks for CO2 Fixation

Wei Xu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection
Article Energy & Fuels

Different supports of modified heteropolyacid for ultra-deep oxidative desulfurization: A newly easy shaped catalyst and the DFT cluster model study

Si-Wen Li et al.

FUEL (2019)

Add to Collection
Review Materials Science, Multidisciplinary

High-entropy alloys by mechanical alloying: A review

Mayur Vaidya et al.

JOURNAL OF MATERIALS RESEARCH (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Improving the Activity for Oxygen Evolution Reaction by Tailoring Oxygen Defects in Double Perovskite Oxides

Yunmin Zhu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection
Review Chemistry, Physical

Oxidative desulfurization and denitrogenation of fuels using metal-organic framework-based/-derived catalysts

Biswa Nath Bhadra et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2019)

Add to Collection
Article Chemistry, Physical

Mixed Transition Metal Oxide with Vacancy-Induced Lattice Distortion for Enhanced Catalytic Activity of Oxygen Evolution Reaction

Hyeon Jeong Lee et al.

ACS CATALYSIS (2019)

Add to Collection
Article Chemistry, Physical

Oxygen-defective Co3O4 for pseudo-capacitive lithium storage

Jie Zhang et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection
Review Chemistry, Multidisciplinary

Applications of Metal-Organic-Framework-Derived Carbon Materials

Wenping Yang et al.

ADVANCED MATERIALS (2019)

Add to Collection
Article Chemistry, Physical

Oxidation Desulfurization of Fuels by Using Amphiphilic Hierarchically Meso/Macroporous Phosphotungstic Acid/SiO2 Catalysts

Du Yue et al.

CATALYSIS LETTERS (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Nanoscale Trimetallic Metal-Organic Frameworks Enable Efficient Oxygen Evolution Electrocatalysis

Fei-Long Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection
Article Materials Science, Multidisciplinary

Phase- and size-controllable synthesis with efficient photocatalytic activity of ZnS nanoparticles

Feng Huo et al.

JOURNAL OF MATERIALS SCIENCE (2017)

Add to Collection
Article Materials Science, Multidisciplinary

Designing high entropy alloys employing thermodynamics and Gaussian process statistical analysis

Franck Tancret et al.

MATERIALS & DESIGN (2017)

Add to Collection
Article Chemistry, Multidisciplinary

Deep catalytic oxidative desulfurization (ODS) of dibenzothiophene (DBT) with oxalate-based deep eutectic solvents (DESs)

Hongying Lue et al.

CHEMICAL COMMUNICATIONS (2015)

Add to Collection
Article Chemistry, Multidisciplinary

Deep desulfurization of fuels based on an oxidation/extraction process with acidic deep eutectic solvents

Jingmei Yin et al.

GREEN CHEMISTRY (2015)

Add to Collection
Article Chemistry, Multidisciplinary

An organic-inorganic hybrid compound constructed by polytungsto-vanadosilicate and hexadecyltrimethyl ammonium as an efficient catalyst for demercaptanization of crude oil

Mohammad All Rezvani et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)

Add to Collection
Article Biochemical Research Methods

DBT- and DBTO2-Induced Dysplasia and Their Associated Proteomic Alterations in the Small Intestines of Wistar Rats

Karina Taciana Silva et al.

JOURNAL OF PROTEOME RESEARCH (2015)

Add to Collection
Article Chemistry, Multidisciplinary

Carbon nanotube catalysts for oxidative desulfurization of a model diesel fuel using molecular oxygen

Wei Zhang et al.

GREEN CHEMISTRY (2014)

Add to Collection
Article Energy & Fuels

Oxidative desulfurization of light gas oil and vacuum gas oil by oxidation and solvent extraction

S Otsuki et al.

ENERGY & FUELS (2000)

Add to Collection
Webinars Posters Questions Hubs Funding Journals Papers Connect Collections Reviewers About Us FAQs Mobile App Privacy Policy Terms of Use
© Peeref 2019-2024. All rights reserved.