☆ 4.7 Article

An inverse optimization of turbulent flow and heat transfer for a cooling passage with hierarchically arranged ribs in turbine blades

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2024)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Performance evaluation with turbulent flow and heat transfer characteristics in rectangular cooling channels with various novel hierarchical rib schemes

Shao-Fei Zheng et al.

Summary: The hierarchical arrangement of ribs can significantly reduce the friction loss and improve the cooling efficiency. However, it may cause a slight deterioration in heat transfer. The W-shaped ribs achieve higher heat transfer enhancement under the hierarchical scheme.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2023)

Add to Collection

Article Thermodynamics

Numerical study of heat transfer and flow structure over channel surfaces featuring miniature V rib-dimples with various configurations

Shuangye Ran et al.

Summary: The numerical study on miniature V rib-dimple hybrid structures for enhancing heat transfer in gas turbine blade internal cooling channels revealed that increasing rib height and dimple depth initially leads to significant heat transfer enhancement before reaching a stable state. The hybrid structures exhibited superior heat transfer performance compared to rib-only and dimple-only structures, with optimal parameters identified for maximum heat transfer augmentation. The interaction between vortex flow induced by V ribs and downstream dimpled walls enhances momentum and heat transport, contributing to improved and more uniform heat transfer on the channel surface.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

Add to Collection

Article Thermodynamics

Effects of a high Reynolds number and rotation on the leading-edge heat transfer of a ribb e d cooling channel with a cross-section consisting of a semicircle and a rectangle

Dawei Zhang et al.

Summary: This study experimentally investigated the heat transfer performance in a combined-shaped cooling channel with angled ribs. The results showed that the rotating channel had a maximum Nu/Nu(0) ratio of 6.4, which was 1.79 times higher than that of the non-rotating channel. The interaction between ribs and rotation had an impact on the Nu/Nus ratio at different measurement points.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Thermodynamics

Fluid flow and heat transfer in a rectangular ribbed channel with a hierarchical design for turbine blade internal cooling

Shao-Fei Zheng et al.

Summary: This study proposes a hierarchical design concept to optimize the arrangement of rib turbulators for internal cooling of turbine blades, aiming to reduce pressure loss while maintaining heat transfer performance. Numerical simulations verify the feasibility of the proposed design and demonstrate that the optimized configuration greatly reduces pressure loss with a slight deterioration in heat transfer. The comparison of overall thermal performance shows significant improvement, indicating the potential of the hierarchical design concept in developing high-performance internal cooling of turbine blades.

APPLIED THERMAL ENGINEERING (2022)

Add to Collection

Article Thermodynamics

Coupled heat transfer analysis of internal and film cooling of turbine blade under medium temperature conditions

W. Jin et al.

Summary: There is a lack of research on the coupled heat transfer characteristics of turbine blade cooling. This study numerically investigates the coupled heat transfer in a turbine blade by considering both internal and film cooling. The results show that the heat conduction through the dividing wall enhances the cooling effect, and adjusting the blowing ratio improves the blade cooling performance.

APPLIED THERMAL ENGINEERING (2022)

Add to Collection

Review Thermodynamics

Heat transfer in the trailing region of gas turbines - A state-of-the-art review

Du Wei et al.

Summary: Highly efficient gas turbines are crucial for improving energy structures and reducing carbon emissions, but issues at the trailing edge call for enhanced heat transfer measures. Research focuses primarily on pin finned ducts, with limited investigations on latticework ducts. Additional cooling structures and innovative designs are being explored for better efficiency.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Engineering, Aerospace

Optimization of cooling structures in gas turbines: A review

Guohua ZHANG et al.

Chinese Journal of Aeronautics (2021)

Add to Collection

Article Thermodynamics

Combined experimental and numerical investigations on heat transfer augmentation in truncated ribbed channels designed by adopting fractal theory

Guohua Zhang et al.

Summary: This study experimentally tests and numerically investigates the heat transfer enhancement and flow characteristics of truncated ribs designed using fractal theory in a rectangular channel with an aspect ratio of 1:4. The research reveals two methods to improve the heat transfer performance of truncated ribs, based on the study of ribs with different cross sections, arrangements, and cut-off angles. Results indicate that the overall thermal performance can be improved by up to 38.21% with respect to a certain factor, and up to 12.16% with respect to another factor, showcasing the benefits of using fractal-designed truncated ribs.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Experimental and numerical investigations of heat transfer and fluid flow in a rectangular channel with perforated ribs

Jian Liu et al.

Summary: This study focuses on using perforated 90 degrees ribs to enhance thermal performance in a rectangular cooling channel with an aspect ratio of 4:1. The results show that perforated ribs can significantly improve heat transfer efficiency with reduced pressure drop, but they may disturb flow reattachment regions leading to slightly decreased local heat transfer in those areas.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Mechanics

Numerical investigation of truncated-root rib on heat transfer performance of internal cooling turbine blades

C. T. Dinh et al.

Summary: A new turbine blade rib configuration called the truncated-root rib was designed in this study to reduce the disadvantages of the traditional squared-rib and improve heat transfer performance. Numerical results showed that the heat transfer performance of the truncated-root rib configuration was greater than that of the squared-rib, with an increase in Nusselt number by 8.56% and a 39.24% higher thermal performance compared to the original rib shape.

PHYSICS OF FLUIDS (2021)

Add to Collection

Article Thermodynamics

Inverse simulation to optimize the rib-profile in a rectangular flow-channel

Chunhua Min et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

An inverse optimization of convection heat transfer in rectangle channels with ribbed surface based on the extremum principle of entransy dissipation

Chunhua Min et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Thermodynamics

Heat transfer enhancement and turbulent flow in a high aspect ratio channel (4:1) with ribs of various truncation types and arrangements

Jian Liu et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2018)

Add to Collection

Article Thermodynamics

Advanced Cooling in Gas Turbines 2016 Max Jakob Memorial Award Paper

Je-Chin Han

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2018)

Add to Collection

Article Thermodynamics

Study on heat transfer performance of steam-cooled ribbed channel using neural networks and genetic algorithms

Lei Xi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Thermodynamics

Experimental investigations of heat transfer enhancement from rectangular duct roughened by hybrid ribs

S. Alfarawi et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2017)

Add to Collection

Article Thermodynamics

Numerical investigation of turbulent flow and heat transfer in two-pass ribbed channels

Bharath Viswanath Ravi et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2017)

Add to Collection

Article Thermodynamics

Heat Transfer and Flow Characteristics of Two-Pass Parallelogram Channels With Attached and Detached Transverse Ribs

T. M. Liou et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2017)

Add to Collection

Article Thermodynamics

Experimental study of heat transfer augmentation in a two-pass channel featuring V-shaped ribs and cylindrical dimples

Prashant Singh et al.

APPLIED THERMAL ENGINEERING (2017)

Add to Collection

Article Thermodynamics

Effects of inlet velocity profile on flow and heat transfer in the entrance region of a ribbed channel

Dae Hyun Kim et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Add to Collection

Article Thermodynamics

Efficient multi-objective optimization of a boot-shaped rib in a cooling channel

Jae-Won Seo et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2016)

Add to Collection

Article Thermodynamics

Multi-parameter optimization of flow and heat transfer for a novel double-layered microchannel heat sink

Chuan Leng et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Add to Collection

Article Thermodynamics

Effect of Rotation on Detailed Heat Transfer Distribution for Various Rib Geometries in Developing Channel Flow

Justin A. Lamont et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2014)

Add to Collection

Article Thermodynamics

ON THE IMPROVEMENT OF THE POOR HEAT TRANSFER LEE-SIDE REGIONS OF SQUARE CROSS-SECTION RIBBED CHANNELS

Shaofei Zheng et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2014)

Add to Collection

Article Thermodynamics

A numerical study of flow structure and heat transfer in a square channel with ribs combined downstream half-size or same-size ribs

Gongnan Xie et al.

APPLIED THERMAL ENGINEERING (2013)

Add to Collection

Article Thermodynamics

Geometry optimization of thermoelectric coolers using simplified conjugate-gradient method

Yu-Xian Huang et al.

ENERGY (2013)

Add to Collection

Review Engineering, Mechanical

Heat Transfer Augmentation Technologies for Internal Cooling of Turbine Components of Gas Turbine Engines

Phil Ligrani

INTERNATIONAL JOURNAL OF ROTATING MACHINERY (2013)

Add to Collection

Article Thermodynamics

Multi-parameters optimization for microchannel heat sink using inverse problem method

Zheng-Hua Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2011)

Add to Collection

Article Thermodynamics

Heat Transfer and Pressure Drop Correlations for Square Channels With V-Shaped Ribs at High Reynolds Numbers

Nawaf Y. Alkhamis et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2011)

Add to Collection

Article Chemistry, Physical

An inverse geometry design problem for optimization of single serpentine flow field of PEM fuel cell

Xiao-Dong Wang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

Add to Collection

Article Thermodynamics

High Rotation Number Effect on Heat Transfer in a Triangular Channel With 45 deg, Inverted 45 deg, and 90 deg Ribs

Yao-Hsien Liu et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2010)

Add to Collection

Article Thermodynamics

Shape optimization of three-dimensional channel roughened by angled ribs with RANS analysis of turbulent heat transfer

Hong-Min Kim et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)

Add to Collection

Article Thermodynamics

Influence of entrance geometry on heat transfer in rotating rectangular cooling channels (AR=4:1) with angled ribs

LM Wright et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2005)

Add to Collection

Article Thermodynamics

Computational analysis of heat transfer enhancement in square ducts with V-shaped ribs:: Turbine blade cooling

R Jia et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2005)

Add to Collection

Article Thermodynamics

Design optimization of rib-roughened channel to enhance turbulent heat transfer

HM Kim et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)

Add to Collection

Article Thermodynamics

Convective heat transfer in a channel with perforated ribs

JM Buchlin

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.