☆ 4.7 Article

Characterization, properties and mechanism of composite synthesized Eucommia ulmoides rubber and epoxy resin for electromagnetic interference shielding application

INDUSTRIAL CROPS AND PRODUCTS (2024)

Related references

Note: Only part of the references are listed.

Review Materials Science, Multidisciplinary

Recent progress on multifunctional electromagnetic interference shielding polymer composites

Ke Tian et al.

Summary: The explosive development of electronic devices and wireless communication technology has led to the issue of electromagnetic pollution, and the development of multifunctional EMI shielding materials has emerged to solve this problem. This paper summarizes the basic theory and characterization technologies of EMI shielding, and provides detailed descriptions of seven types of multifunctional EMI shields. The main challenges in the development of multifunctional EMI shielding materials are identified.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

Add to Collection

Article Chemistry, Physical

Green EMI shielding: Dielectric/magnetic ?genes? and design philosophy

Xi-Xi Wang et al.

Summary: Benefiting from new materials, innovative structures, advanced techniques, and multiple mechanisms, electro-magnetic interference (EMI) shielding materials are developing vigorously. However, the electromagnetic pollution caused by excessive secondary reflection has not received enough attention in the pursuit of high-efficiency EMI shielding performance. Developing green EMI shielding is becoming a new hot topic.

CARBON (2023)

Add to Collection

Article Agricultural Engineering

Flexible conductive gasket based on Eucommia ulmoides gum and carbon fillers

Panpan Yue et al.

Summary: Eucommia ulmoides gum (EUG) is an eco-friendly and biodegradable novel polymer with properties of both rubber and plastic, showing excellent potential for conductive gasket material. A flexible, lightweight, and biodegradable composite was prepared via hot pressing, exhibiting advantageous properties such as mechanical performance, thermal stability, and electrical conductivity. The EUG-based composite also showed stable electrical conductivity under various physical and chemical damages, with increased effectiveness in electromagnetic interference shielding through higher carbon nanotubes content and film thickness. This green, degradable, and cost-effective strategy provides an alternative route for conductive gaskets amidst the growing misuse of nondegradable polymers, promoting the practical application of Eucommia ulmoides gum.

INDUSTRIAL CROPS AND PRODUCTS (2022)

Add to Collection

Article Engineering, Environmental

Natural rubber toughened carbon nanotube buckypaper and its multifunctionality in electromagnetic interference shielding, thermal conductivity, Joule heating and triboelectric nanogenerators

Mingshuai Fan et al.

Summary: A new type of multifunctional natural rubber-toughened carbon nanotube buckypaper with excellent comprehensive performance was successfully fabricated in this study. It exhibited improved mechanical properties, maintained conductivity, and demonstrated high EMI shielding efficiency, showing great potential for wearable electronic devices.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Agricultural Engineering

The influence of different drying methods on bioactive components of Eucommia ulmoides Oliver male flower and the comprehensive assessment for industrial application

Xiao-Na Le et al.

Summary: The study investigated the impact of different drying methods on Eucommia ulmoides Oliver male flowers and found that microwave drying was the most suitable drying condition based on chemical composition. Economically, microwave drying was considered the most efficient method for industrial production of Eucommia ulmoides Oliver male flower tea.

INDUSTRIAL CROPS AND PRODUCTS (2022)

Add to Collection

Article Chemistry, Physical

Graphene-wrapped multiloculated nickel ferrite: A highly efficient electromagnetic attenuation material for microwave absorbing and green shielding

Yuchang Wang et al.

Summary: This study reports a multifunctional electromagnetic absorbing and electromagnetic interference shielding material using graphene-wrapped multiloculated NiFe2O4 composites. The conductive networks formed by graphene and the multiloculated structure of NiFe2O4 optimize the dielectric constant of the composites and establish a magnetic-dielectric synergy effect. The material also exhibits good electrocatalytic activity. This work provides an excellent jumping-off point for the development of multifunctional EM absorbing materials, eco-friendly EMI shielding materials, and electrocatalysts.

NANO RESEARCH (2022)

Add to Collection

Article Polymer Science

Bio-Based Eucommia ulmoides Gum Composites with High Electromagnetic Interference Shielding Performance

Hailan Kang et al.

Summary: High-performance electromagnetic interference shielding composites were prepared using Eucommia ulmoides gum (EUG) as the matrix and carbon nanotube (CNT)/graphene nanoplatelet (GNP) hybrids as conductive fillers. The composites showed uniform distribution of CNTs and GNPs, resulting in improved conductivity and EMI shielding effect. They exhibited attractive mechanical properties and high thermal stability, making them potential candidates for various applications.

POLYMERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Grow defect-rich bamboo-like carbon nanotubes on carbon black for enhanced microwave absorption properties in X band

Yameng Jiao et al.

Summary: In this study, defect-rich bamboo-like carbon nanotubes (CNTs) were grown on carbon black (CB) to establish a developed multilevel conductive network and introduce abundant CB/CNTs nano-interfaces. The defects on CNTs provide moderate conductivity and good impedance matching for effective microwave absorption (MA). Moreover, the high-density defects on CNTs enhance the EMW loss ability by inducing dipole polarization.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Engineering, Mechanical

High-speed tribological properties of Eucommia ulmoides gum/natural rubber blends: Experimental and molecular dynamics simulation study

Fei Teng et al.

Summary: Eucommia ulmoides gum (EUG) shows excellent tribological qualities and can be used as an alternative material for aircraft tires. Investigation of the high-speed tribological properties of EUG/natural rubber (NR) blends revealed that EUG improves wear resistance and reduces friction coefficient of the blend.

TRIBOLOGY INTERNATIONAL (2022)

Add to Collection

Article Engineering, Electrical & Electronic

New Energy Vehicle Electromagnetic Compatibility Test and Closed-Loop Simulation Analysis

Ling Ma et al.

Summary: The study shows that the radiation emission of the electric drive system mainly depends on the presence of torque, rather than the motor speed and bus voltage. Even with an increase in torque size, there is no significant impact on radiation emission. Therefore, during testing, the appropriate torque should be selected based on actual conditions.

JOURNAL OF SENSORS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Modern Advances in Magnetic Materials of Wireless Power Transfer Systems: A Review and New Perspectives

De'an Wang et al.

Summary: This paper provides an extensive review of the development and application of high-performance magnetic materials in magnetic coupling resonant wireless power transfer (MCR-WPT). It offers an exclusive reference to researchers and engineers interested in the technology, highlighting critical issues to be addressed. The potential challenges and opportunities of WPT magnetic materials are presented, along with the future development directions of the technology.

NANOMATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Wearable, ultrathin and transparent bacterial celluloses/MXene film with Janus structure and excellent mechanical property for electromagnetic interference shielding

Chang Ma et al.

Summary: A novel Janus bacterial cellulose/MXene film with excellent flexibility, transparency, and conductivity was demonstrated, showing potential for skin-contactable materials. The thin and light film exhibited high tensile strength, folding-endurance, and specific shielding effectiveness, making it a promising candidate for wearable devices, military technology, and human electronic equipment.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Polymer Science

Lightweight and flexible silicone rubber foam with dopamine grafted multi-walled carbon nanotubes and silver nanoparticles using supercritical foaming technology: Its preparation and electromagnetic interference shielding performance

Yifa Song et al.

Summary: By grafting dopamine onto multi-walled carbon nanotubes and using it as a chemical activation point for in-situ synthesis of silver nanoparticles, a lightweight and flexible silicone rubber foam material with efficient electromagnetic shielding performance was prepared. The EMI SE value of the foam material with added MWCNT-PDA-Ag can reach 36 dB, exceeding commercial requirements, and increases with sample thickness.

EUROPEAN POLYMER JOURNAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Flexible, stretchable and magnetic Fe3O4@Ti3C2Tx/elastomer with supramolecular interfacial crosslinking for enhancing mechanical and electromagnetic interference shielding performance

Quancheng Song et al.

Summary: In this study, flexible FMDE materials with excellent electromagnetic shielding performance were prepared by designing nanostructures and regulating interface interactions, demonstrating outstanding mechanical properties.

SCIENCE CHINA-MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Structure and porosity of conductive carbon blacks

R. Neffati et al.

Summary: By comparing the structure and porosity of two carbon black grades, it was found that Ketjenblack EC600JD has a higher specific surface and volume, as well as more disordered graphitic layers, and the impact of these differences on the electrical conductivity of nanocomposites was investigated.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Add to Collection

Article Multidisciplinary Sciences

Specific electromagnetic radiation in the wireless signal range increases wakefulness in mice

Lingyu Liu et al.

Summary: Exposure to modulated 2.4-GHz EMR at a nonthermal output level significantly increases wakefulness time and decreases NREM and REM time in mice. In contrast, unmodulated 2.4-GHz EMR at the same output level has little impact on mouse sleep patterns. These findings suggest that alteration of sleep architecture in mice is a specific physiological response to prolonged exposure to wireless-range EMR.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Structural Design Strategies of Polymer Matrix Composites for Electromagnetic Interference Shielding: A Review

Chaobo Liang et al.

Summary: With the widespread application of electronic communication technology, the concern for electromagnetic radiation pollution has increased. Metal matrix EMI shielding materials have issues, while polymer matrix EMI shielding composites have natural advantages but need to improve performance.

NANO-MICRO LETTERS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Polymer-based EMI shielding composites with 3D conductive networks: A mini-review

Lei Wang et al.

Summary: Polymer-based EMI shielding materials, with their lightweight, high specific strength, and stable properties, have become the mainstream for addressing electromagnetic interference (EMI) issues. The construction of 3D conductive networks has proven to be an effective method for preparing these materials with excellent shielding effectiveness. Future research will focus on solving key scientific and technical issues and exploring the development trends and application prospects of polymer-based EMI shielding materials.

SUSMAT (2021)

Add to Collection

Article Engineering, Environmental

Superhydrophobic and multi-responsive fabric composite with excellent electro-photo-thermal effect and electromagnetic interference shielding performance

Junchen Luo et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Variable-Temperature Electron Transport and Dipole Polarization Turning Flexible Multifunctional Microsensor beyond Electrical and Optical Energy

Mao-Sheng Cao et al.

ADVANCED MATERIALS (2020)

Add to Collection

Review Engineering, Electrical & Electronic

Thermally Conducting Polymer Composites with EMI Shielding: A review

Subhransu S. Pradhan et al.

JOURNAL OF ELECTRONIC MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

2D MXenes for Electromagnetic Shielding: A Review

Aamir Iqbal et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Flexible and Ultrathin Waterproof Cellular Membranes Based on High-Conjunction Metal-Wrapped Polymer Nanofibers for Electromagnetic Interference Shielding

Zhihui Zeng et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Ultra-light MXene aerogel/wood-derived porous carbon composites with wall-like mortar/brick structures for electromagnetic interference shielding

Chaobo Liang et al.

SCIENCE BULLETIN (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Graphene Foams for Electromagnetic Interference Shielding: A Review

Zhenxin Jia et al.

ACS APPLIED NANO MATERIALS (2020)

Add to Collection

Review Engineering, Multidisciplinary

A review of multifunctional polymer-matrix structural composites

D. D. L. Chung

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Protective polymeric films for industrial substrates: A critical review on past and recent applications with conducting polymers and polymer composites/nanocomposites

Saviour A. Umoren et al.

PROGRESS IN MATERIALS SCIENCE (2019)

Add to Collection

Article Engineering, Manufacturing

Study on foamability and electromagnetic interference shielding effectiveness of supercritical CO2 foaming epoxy/rubber/MWCNTs composite

Xun Fan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Recent advances in carbon-based polymer nanocomposites for electromagnetic interference shielding

Hooman Abbasi et al.

PROGRESS IN MATERIALS SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

A simple strategy for flexible electromagnetic interference shielding: Hybrid rGO@CB-Reinforced polydimethylsiloxane

J. B. Anooja et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Agricultural Engineering

Characterization and simulation of composite films synthesized by Eucommia rubber and epoxy resin

Guo-Tao Sun et al.

INDUSTRIAL CROPS AND PRODUCTS (2019)

Add to Collection

Article Engineering, Environmental

Fabrication of a flexible electromagnetic interference shielding Fe3O4@ reduced graphene oxide/natural rubber composite with segregated network

Yanhu Zhan et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Review Engineering, Multidisciplinary

A review of porous lightweight composite materials for electromagnetic interference shielding

Ashish Kumar Singh et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Review Polymer Science

A review on the mechanical, electrical and EMI shielding properties of carbon nanotubes and graphene reinforced polycarbonate nanocomposites

Nisha Bagotia et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Thermally Driven Transport and Relaxation Switching Self-Powered Electromagnetic Energy Conversion

Maosheng Cao et al.

SMALL (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Porous Javelin-Like NiFe2O4 Nanorods as n-Propanol Sensor with Ultrahigh-Performance

Xiao-Feng Wang et al.

CHEMISTRYSELECT (2018)

Add to Collection

Article Multidisciplinary Sciences

A highly stretchable, transparent, and conductive polymer

Yue Wang et al.

SCIENCE ADVANCES (2017)

Add to Collection

Article Materials Science, Ceramics

Theoretical prediction and experimental verification on EMI shielding effectiveness of dielectric composites using complex permittivity

Jimei Xue et al.

CERAMICS INTERNATIONAL (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Graphene-Based Sandwich Structures for Frequency Selectable Electromagnetic Shielding

Wei-Li Song et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Physical

Ultralight lamellar amorphous carbon foam nanostructured by SiC nanowires for tunable electromagnetic wave absorption

Shanshan Xiao et al.

CARBON (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Segregated Hybrid Poly(methyl methacrylate)/Graphene/Magnetite Nanocomposites for Electromagnetic Interference Shielding

Farbod Sharif et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Agricultural Engineering

Isolation and analysis of four constituents from barks and leaves of Eucommia ulmoides Oliver by a multi-step process

Ming-Qiang Zhu et al.

INDUSTRIAL CROPS AND PRODUCTS (2016)

Add to Collection

Article Chemistry, Physical

Achieving excellent bandwidth absorption by a mirror growth process of magnetic porous polyhedron structures

Hualiang Lv et al.

NANO RESEARCH (2016)

Add to Collection

Article Multidisciplinary Sciences

Electromagnetic interference shielding with 2D transition metal carbides (MXenes)

Faisal Shahzad et al.

SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

Preparation and microwave absorption properties of Ni-Co nanoferrites

Bi-yu Chen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Prediction of the stress relaxation property of diene rubber composites by artificial neural network approaches

Xiujuan Wang et al.

RSC ADVANCES (2015)

Add to Collection

Review Nanoscience & Nanotechnology

Effective Approaches to Improve the Electrical Conductivity of PEDOT:PSS: A Review

Hui Shi et al.

ADVANCED ELECTRONIC MATERIALS (2015)

Add to Collection

Review Materials Science, Multidisciplinary

Polymer/carbon based composites as electromagnetic interference (EMI) shielding materials

Jean-Michel Thomassin et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2013)

Add to Collection

Article Engineering, Electrical & Electronic

MODELING AND ANALYSIS OF CONDUCTED ELECTROMAGNETIC INTERFERENCE IN ELECTRIC VEHICLE POWER SUPPLY SYSTEM

Yan Jie Guo et al.

PROGRESS IN ELECTROMAGNETICS RESEARCH-PIER (2013)

Add to Collection

Article Engineering, Manufacturing

Electromagnetic interference shielding/absorbing characteristics of CNT-embedded epoxy composites

I. W. Nam et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.