4.6 Review

Sulfur and Water Resistance of Carbon-Based Catalysts for Low-Temperature Selective Catalytic Reduction of NOx: A Review

Related references

Note: Only part of the references are listed.
Article Environmental Sciences

Enhancement of performance and sulfur resistance of Si-doped V/W/Ti using sulfation for selective catalytic reduction of NOx with ammonia

Jong Min Won et al.

Summary: This study investigated the enhancement of SO2 resistance in silica using V/SiW/TiO2 catalysts prepared from different precursors. The catalyst prepared with DMDMS demonstrated the highest increase in resistance. The formation of Si(SO4) species increased the number of adsorbed sites and the reducing agent, improving denitrification efficiency.

ENVIRONMENTAL TECHNOLOGY (2023)

Review Chemistry, Multidisciplinary

Graphitic carbon nitride-based nanostructures as emergent catalysts for carbon monoxide (CO) oxidation

Kamel Eid et al.

Summary: Pristine graphitic carbon nitride-based catalysts (g-C3N4) show limitations in practical CO oxidation applications, such as low surface area, sluggish electron transfer, inadequate gas activation, poor electrical conductivity, and weak visible-light absorption. These issues can be addressed by incorporating heteroatoms, metals/metal oxides, and single atoms into g-C3N4 nanostructures, as well as coupling g-C3N4 with other semiconductors to form heterojunction structures. Additionally, electron donation from the g-C3N4 support enhances O-2 adsorption and activation. This review aims to provide a comprehensive understanding of the rational design and challenges of g-C3N4-based catalysts for CO oxidation.

GREEN CHEMISTRY (2023)

Article Chemistry, Applied

Recent advance for NOx removal with carbonaceous material for low-temperature NH3-SCR reaction

Liang Wang et al.

Summary: The purification of gaseous pollutants, especially nitrogen oxides, from fossil fuel combustion is currently a significant concern. Selective catalytic reduction (SCR) technology has proven to be an effective method for removing nitrogen oxides. The improvement of catalyst performance, such as enhancing anti-poisoning ability and low-temperature catalytic efficiency, is the main focus of current extensive research. Carbonaceous materials have been widely used as low-temperature catalysts for NOx removal due to their diverse structures and rich surface functional groups, with potential for multi-pollutant removal. This article summarizes different carbonaceous materials, activation methods, and carbon-based NH3-SCR catalysts, along with their corresponding reaction mechanisms. Additionally, the removal of multiple contaminants using carbon-based catalysts is discussed. Finally, future development directions for carbonaceous materials in pollutant control are proposed.

CATALYSIS TODAY (2023)

Article Energy & Fuels

Unveiling the inductive strategy of different precipitants on MnFeOx catalyst for low-temperature NH3-SCR reaction

Zhichao Chen et al.

Summary: The inductive strategy of three precipitants on dual transition metal MnFeOx catalysts for low-temperature NH3-SCR reaction was investigated. The anions of precipitants played a leading role in the formation of catalytic phase, while cations determined the stability of hydroxyl groups. The MnFe-ammonium carbonate catalyst showed the highest catalytic efficiency, with over 90% NO conversion achieved from 75 to 225 degrees C. The effects of the precipitants on the intrinsic catalytic activity of the catalysts, such as energy barrier and reaction rate, were confirmed.
Review Chemistry, Multidisciplinary

The Resistance of SO2 and H2O of Mn-Based Catalysts for NOx Selective Catalytic Reduction with Ammonia: Recent Advances and Perspectives

Jungang Tang et al.

Summary: The treatment of NOx has become an urgent issue due to its difficulty in degradation in air and its negative impact on public health. Among various technologies, selective catalytic reduction (SCR) using ammonia as the reducing agent is considered as the most effective and promising technique. However, the development of high-efficiency catalysts for SCR is severely limited due to the poisoning and deactivation effect by SO2 and H2O vapor. This review summarizes the recent advances in enhancing the catalytic activity and stability of manganese-based catalysts in low-temperature NH3-SCR, as well as discussing the challenges and potential solutions for designing a catalytic system with high resistance to SO2 and H2O.

ACS OMEGA (2023)

Article Engineering, Chemical

Unraveling the morphology and crystal plane dependence of bifunctional MnO2 catalyst for simultaneous removal of NO and CO at low temperature

Xiaodi Li et al.

Summary: Four different crystalline phases of MnO2 catalysts were synthesized, and their effects on the catalytic performance for NO reduction and CO oxidation were investigated. It was found that the γ-MnO2 catalyst exhibited the best activity, achieving high NO removal efficiency and CO conversion rate. The presence of CO was found to enhance the catalytic activity of the γ-MnO2 catalyst in the NH3-SCR reaction.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

Article Energy & Fuels

Performance of Fe-Ni-W exchanged zeolite for NOx reduction with NH3 in a lab-scale circulating fluidized bed

Hanzi Liu et al.

Summary: A new catalyst (Fe-Ni-W exchanged zeolite) has been reported to extend the application range of SNCR at lower temperatures, increasing NOx conversion rates. Optimization of catalyst usage conditions has led to achieving maximum efficiency at 700 degrees Celsius.
Article Chemistry, Multidisciplinary

Recent advances and perspectives in the resistance of SO2 and H2O of cerium-based catalysts for NOx selective catalytic reduction with ammonia

Junqiang Xu et al.

Summary: NOx is a severe air pollutant, and NH3-SCR technology is regarded as an effective way to treat it. Cerium-based catalysts are environmentally friendly, but improvements in resistance to withstand actual exhaust conditions are needed.

NEW JOURNAL OF CHEMISTRY (2022)

Article Chemistry, Physical

Time-resolved in situ DRIFTS study on NH3-SCR of NO on a CeO2/TiO2 catalyst

Jie Yang et al.

Summary: CeO2/TiO2 catalyst was studied using in situ diffuse reflectance infrared Fourier transform spectroscopy, and it was found that CeO2 particles grew along TiO2 faces and amorphous cerium in the lattice of TiO2. NH4+ could adsorb on the Ti-O-Ce structures or TiO2-CeO2 interface as Bronsted acid sites, and NH4NO3 intermediate dominated the SCR reactions.

CATALYSIS SCIENCE & TECHNOLOGY (2022)

Article Chemistry, Physical

Understanding the dual-acting of iron and sulfur dioxide over Mn-Fe/AC catalysts for low-temperature SCR of NO

Jie Yang et al.

Summary: Research shows that sulfur dioxide can have a dual effect on catalysts in the process of NH3-SCR of NO, both inhibiting the catalyst's low-temperature activity and enhancing N-2 selectivity. The presence of Fe species in the Mn-Fe/AC catalyst can improve selectivity and exhibit better sulfur resistance when exposed to SO2.

MOLECULAR CATALYSIS (2022)

Review Environmental Sciences

Cerium functionalized graphene nano-structures and their applications; A review

Fatemeh Nemati et al.

Summary: Graphene-based nanomaterials have shown great potential in various applications due to their remarkable properties. Functionalized graphene nanocomposites have advantages in increasing surface area and porosity, improving adsorption capacities, reducing adsorption energy barrier, and preventing agglomeration. Combining cerium structures with graphene networks has been widely investigated to enhance the properties of the composite. This research reviews the recent developments in cerium functionalized graphene derivatives and their industrial applications, providing comprehensive information on these nanonetworks. The applications of functionalized graphene derivatives are successfully summarized. This systematic review study has the potential to pave the way for scientific research in material science and various applications.

ENVIRONMENTAL RESEARCH (2022)

Article Chemistry, Multidisciplinary

Effect of K-Modified Blue Coke-Based Activated Carbon on Low Temperature Catalytic Performance of Supported Mn-Ce/Activated Carbon

Zhenghua Shen et al.

Summary: In this study, the effects of K modification on Mn-Ce oxide catalysts supported on activated carbon were investigated. It was found that the catalyst with 8% K loading showed the highest catalytic activity. K modification also improved the resistance to SO2 and H2O, as well as the reduction performance and acid strength of the catalyst. Furthermore, the NO adsorption capacity was enhanced, leading to improved denitration efficiency and SO2 resistance.

ACS OMEGA (2022)

Article Energy & Fuels

Insights into samarium doping effects on catalytic activity and SO2 tolerance of MnFeOx catalyst for low-temperature NH3-SCR reaction

Zhichao Chen et al.

Summary: A series of Sm-doping MnFeOx catalysts were synthesized and SmMnFe-0.1 catalyst showed high NH3-SCR activity and excellent SO2 tolerance. The presence of Sm optimized the dispersity of active components and enlarged the surface area, leading to enhanced catalytic performance.
Article Chemistry, Physical

Different lead species deactivation on Mn-Ce activated carbon supported catalyst for low-temperature SCR of NO with NH3: Comparison of PbCl2, Pb (NO3)2 and PbSO4

Mingming Wang et al.

Summary: This study investigated the deactivation effect of different lead salts on the Mn-Ce activated carbon supported catalyst for low-temperature NH3-SCR of NO. The results showed that PbCl2 caused the most severe deactivation, while Pb(NO3)(2) had the least poisoning impact on the catalyst. PbSO4 exhibited a moderate poisoning effect. The deactivation effect of different lead salts was related to their redox property and surface acidity.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Engineering, Environmental

Poisoning mechanism of KCl, K2O and SO2 on Mn-Ce/CuX catalyst for low-temperature SCR of NO with NH3

Lin Chen et al.

Summary: This study investigates the influence mechanism of K species and SO2 poisoning on waste blast furnace slag catalysts in low-temperature NH3-SCR process. The results show that the co-existence of K species and SO2 inhibits NO conversion and facilitates aggregation of the Cu active component. Catalysts co-poisoned by K species and SO2 have fewer active sites and nitrate species, resulting in poor low-temperature NH3-SCR activity.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Article Chemistry, Physical

Comparative analysis of the dual origins of the N2O byproduct on MnOx, FeOx, and MnFeOx sphere catalysts for a low-temperature SCR of NO with NH3

Zhichao Chen et al.

Summary: The study found that the MnFeOx catalyst exhibited higher catalytic activity but poorer N-2 selectivity due to the coupling effect of Mn and Fe cations, which led to enhanced redox capacity.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Chemistry, Applied

Crucial roles of support modification and promoter introduction in Fe/CNT catalyzed syngas conversion to lower olefins

Yuan Fang et al.

Summary: This study finds that using defect-rich carbon nanotubes as catalyst support can improve the performance of Fischer-Tropsch synthesis products, and K and Mn promoters can further enhance this process.

CATALYSIS TODAY (2021)

Article Chemistry, Physical

Mechanism of selective catalytic reduction of NOx with NH3 over CeO2-TiO2: Insight from in-situ DRIFTS and DFT calculations

Tianyu Liu et al.

Summary: The reaction mechanism over CeO2-TiO2 catalyst involves both E-R and L-H mechanisms, with NH2NO species playing a key role as an intermediate. DFT calculations provide insights into the adsorption energy, activation energy barrier, and reaction heat for various steps in the process.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

The influence of CNTs addition on Mn-Ce/TiO2 catalyst for low-temperature NH3-SCR of NO

Jae-Rang Youn et al.

Summary: By adding CNTs to Mn-Ce/TiO2 catalyst, the efficiency and N-2 selectivity of low-temperature selective catalytic reduction of NO with NH3 can be significantly improved. The addition of CNTs provides more NOx adsorption sites, making the reaction more efficient.

CATALYSIS COMMUNICATIONS (2021)

Article Energy & Fuels

Highly efficient MnOx/biochar catalysts obtained by air oxidation for low-temperature NH3-SCR of NO

Lu Liu et al.

Summary: A novel air oxidation treatment strategy was proposed to modify Mn-doped biochar catalysts for enhanced removal of NO at low temperature. The results showed that air oxidation significantly increased the specific surface area and total pore volume of the catalysts, enhancing their surface acidity and redox capabilities, leading to improved efficiency in NO conversion.
Article Energy & Fuels

Catalytic cracking of n-heptane over Fe modified HZSM-5 nanosheet to produce light olefins

Jie Wang et al.

Summary: Fe modification of NS zeolite catalysts resulted in lower n-heptane cracking conversion but enhanced ethylene and propylene yields due to decreased acid content and restricted deep hydrogen transfer. The Fe@NS catalyst showed improved stability and higher light olefin yields compared to Fe/NS and parent NS catalysts.
Article Chemistry, Physical

A computational study of CO oxidation on IrO2 (110) surface

Chen-Hao Yeh et al.

Summary: Through density functional theory calculations, ab initio molecular dynamics, and microkinetic simulations, it is found that the CO oxidation on the oxygen-rich iridium oxide (O-IrO2 (110)) surface mainly proceeds via Langmuir-Hinshelwood and Eley-Rideal mechanisms. However, the Mars-Van Krevelen mechanism for CO oxidation on this surface is more difficult to proceed.

APPLIED SURFACE SCIENCE (2021)

Article Energy & Fuels

An Experimental Study on the Characteristics of NOx Distributions at the SNCR Inlets of a Large-Scale CFB Boiler

Jin Yan et al.

Summary: This study conducted field tests on a typical 300 MW CFB boiler, analyzing the two-dimensional distributions of flue gas composition at SNCR inlets for the first time. The research found that optimizing urea injections can significantly reduce urea solution consumption while ensuring ultra-low emission of NOx.

ENERGIES (2021)

Article Chemistry, Applied

Catalytic oxidation of CO over V2O5/TiO2 and V2O5-WO3/TiO2 catalysts: A DFT study

Teng-ge Mi et al.

Summary: The study investigates the mechanisms of carbon monoxide (CO) oxidation on two SCR catalyst models and finds that the CO oxidation cycle consists of two key stages. The activation energy for CO oxidation on V2O5/TiO2 surface is lower than that on V2O5-WO3/TiO2, indicating that WO3 doping inhibits the CO oxidation.

FUEL PROCESSING TECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

被撤回的出版物: Two new coordination polymers: Magnetic properties and treatment activity on non-small cell lung cancer by reversing the resistance of the cancer cells (Retracted article. See vol. 16, 2023)

Yi-Long Wan et al.

Summary: This study synthesized two new transition metal coordination polymers with antiferromagnetic coupling, and evaluated their application on non-small cell lung cancer while discussing the related mechanism. The compounds were tested for their viability on NSCLC cells and the expression levels of the ezh2 gene were detected after treatment.

ARABIAN JOURNAL OF CHEMISTRY (2021)

Article Chemistry, Physical

Study on the Mechanism of SO2 Poisoning of MnOx/PG for Lower Temperature SCR by Simple Washing Regeneration

Xianlong Zhang et al.

Summary: Manganese oxide-supported palygorskite (MnOx/PG) catalysts are efficient for low-temperature SCR of NOx, but tend to be poisoned by SO2. The deactivation mechanism involves the formation of polysulfuric acid due to oxidation of SO2, leading to wrapping of the active component and blocking of micropores. Water-washed regeneration can recover the catalyst activity.

CATALYSTS (2021)

Article Chemistry, Multidisciplinary

Promotion of Phosphorus on Carbon Supports for MnOx-CeO2 Catalysts in Low-Temperature NH3-SCR with Enhanced SO2 Resistance

He Wang et al.

Summary: The study demonstrates that P-doping on carbon support significantly enhances the NH3-SCR performance of MnOx-CeO2/P-CA catalysts by improving surface hydrophilicity, facilitating component dispersion, and enhancing electronic interactions between MnOx and CeO2.

CHEMISTRYSELECT (2021)

Article Energy & Fuels

Mechanism of N2O generation over chromium poisoned γ-Fe2O3 catalyst during selective catalytic reduction of NOx with NH3

Xiaoyu Li et al.

Summary: The poisoning effect of Cr on the generation of N2O over gamma-Fe2O3 catalyst during the selective catalytic reduction of NOx with ammonia was observed. The mechanisms of N2O generation at different temperatures were identified, with Cr showing both promotion and inhibition effects on NOx conversion. The formation of FeCr2O4 in the poisoned catalyst was found to be a key factor in enhancing N2O production.
Article Energy & Fuels

Numerical study of the combustion and application of SNCR for NOx reduction in a lab-scale biomass boiler

Seyed Morteza Mousavi et al.

Summary: This paper presents a numerical study on flow, reactions, and NOx emissions from a biomass boiler, utilizing detailed reaction mechanisms and CFD simulations. The study identifies different pathways for NOx formation and evaluates the performance of the Selective Non-Catalytic Reduction (SNCR) method, showing a reduction of up to 63% in NOx emissions.
Article Engineering, Environmental

N2O inhibition by toluene over Mn-Fe spinel SCR catalyst

Peng Lu et al.

Summary: This study investigated the impact of toluene on the N2O formation mechanism, revealing its inhibitory effect on N2O generation from both NH3 oxidation and NSCR pathways.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Chemistry, Physical

Density functional theory researches for atomic structure, properties prediction, and rational design of selective catalytic reduction catalysts: Current progresses and future perspectives

Bin Guan et al.

Summary: The review discusses the application of density functional theory (DFT) in studying the SCR reaction in various aspects such as surface adsorption, active site characteristics, reaction mechanism, poisoning mechanism, and hydrothermal aging mechanism. It shows that catalysts can be improved and rationally designed using quantum chemistry calculations, providing valuable insights for optimizing SCR catalysts and understanding complex reaction mechanisms.

MOLECULAR CATALYSIS (2021)

Article Chemistry, Physical

In-situ fabrication of three-dimensional porous structure Mn-based catalytic filter for low-temperature NO reduction with NH3

Weijie Zheng et al.

Summary: A novel in-situ synthesis method was used to prepare highly dispersed manganese-based catalysts on PPS to enhance NOx reduction with NH3. The best Mn-based catalytic filter showed excellent performance with 100% NO conversion at 120 degrees C and over 90% conversion in a wide temperature range. The synergistic effect between tin and cerium ions, 3D porous structure, weak crystallization, and high ratios of Mn4+/Mn3+ were key factors contributing to the superior catalytic performance.

MOLECULAR CATALYSIS (2021)

Review Engineering, Environmental

Review on the selective catalytic reduction of NOx with H2 by using novel catalysts

Yu Guan et al.

Summary: Selective catalytic reduction is a common technology used to control nitrogen oxides (NOx) in various industries. Recently, selective catalytic reduction with H-2 (H-2-SCR) has emerged as a promising DeNO(x) technology, with this review covering reaction mechanisms, catalyst types, preparation methods, performance effects, and other related aspects.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Engineering, Environmental

Nb2O5-modified Mn-Ce/AC catalyst with high ZnCl2 and SO2 tolerance for low-temperature NH3-SCR of NO

Yuhan Zhou et al.

Summary: This study found that doping Nb2O5 can enhance the SCR performance and sulfur resistance of Zn-Mn-Ce/AC catalyst, form new acidic sites by preferentially reacting with SO2, promote NH3 adsorption and inhibit SO2 adsorption, which hinders the reaction between NH3 and SO2 and slows the formation of ammonium sulfate channels on the catalyst.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Engineering, Environmental

Synergistic effect and mechanism of FeOx and CeOx co-doping on the superior catalytic performance and SO2 tolerance of Mn-Fe-Ce/ACN catalyst in low-temperature NH3-SCR of NOx

Lijun Jiang et al.

Summary: This study achieved excellent performance of Mn-Fe(0.4)-Ce(0.4)/ACN catalyst by co-doping FeOx and CeOx, including improved catalytic activity, N-2 selectivity, and SO2 tolerance. Co-doping FeOx and CeOx promoted NH3-SCR performance and effectively inhibited the adsorption and reaction of SO2.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Review Chemistry, Multidisciplinary

A review of Mn-based catalysts for low-temperature NH3-SCR: NOx removal and H2O/SO2 resistance

Guiying Xu et al.

Summary: This review discusses the importance of NOx removal, the effects of H2O and SO2 on catalysts, and the resistance of Mn-based catalysts. It analyzes the impact of factors such as metal modification and support selection on resistance, and proposes future research focus and countermeasures to solve existing problems.

NANOSCALE (2021)

Article Chemistry, Multidisciplinary

Adsorption mechanism of NH3, NO, and O2 molecules over the FexOy/AC catalyst surface: a DFT-D3 study

Chaoyue Xie et al.

Summary: In this study, models of FexOy/AC were built to investigate the adsorption mechanisms of NH3, NO, and O-2 molecules on their surfaces using DFT-D3 study. It was found that Fe2O3 cluster has the best adsorption property for NH3, leading to NH3-SCR deNO(x) reaction. Additionally, three types of adsorption products were observed when NO is adsorbed on the FexOy/AC surface.

NEW JOURNAL OF CHEMISTRY (2021)

Article Chemistry, Applied

Catalytic reduction of NO by CO with Cu-based and Mn-based catalysts

Kuan Lun Pan et al.

CATALYSIS TODAY (2020)

Article Engineering, Environmental

MOFs-based coating derived Me-ZIF-67@CuOx materials as low-temperature NO-CO catalysts

Yuan Wang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Review Chemistry, Multidisciplinary

Low-temperature selective catalytic reduction of NOx with NH3 over zeolite catalysts: A review

Yijuan Pu et al.

CHINESE CHEMICAL LETTERS (2020)

Article Engineering, Environmental

Unraveling the Unexpected Offset Effects of Cd and SO2 Deactivation over CeO2-WO3/TiO2 Catalysts for NOx Reduction

Lijun Yan et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Article Chemistry, Applied

Enhanced SO2 tolerance of FeCeOx/CNTs catalyst for NO and Hg0 removal by coating shell SiO2

Huawei Zhang et al.

FUEL PROCESSING TECHNOLOGY (2020)

Review Environmental Sciences

Density functional theory (DFT) studies of vanadium-titanium based selective catalytic reduction (SCR) catalysts

Ziwei Zhao et al.

JOURNAL OF ENVIRONMENTAL SCIENCES (2020)

Article Chemistry, Physical

Sn-doped rutile TiO2 for vanadyl catalysts: Improvements on activity and stability in SCR reaction

Wenzhe Si et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2020)

Article Chemistry, Multidisciplinary

Systematic effects of Fe doping on the activity of V2O5/TiO2-carbon nanotube catalyst for NH3-SCR of NOx

S. Raja et al.

JOURNAL OF NANOPARTICLE RESEARCH (2020)

Article Engineering, Environmental

V2O5-modified Mn-Ce/AC catalyst with high SO2 tolerance for low-temperature NH3-SCR of NO

Lijun Jiang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Multidisciplinary Sciences

TiO2-SiO2 supported MnWOx catalysts by liquid-phase deposition for low-temperature NH3-SCR

Weizhe Lu et al.

ROYAL SOCIETY OPEN SCIENCE (2019)

Article Engineering, Environmental

Fe2O3-CeO2@Al2O3 Nanoarrays on Al-Mesh as SO2-Tolerant Monolith Catalysts for NO, Reduction by NH3

Lupeng Han et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Article Nanoscience & Nanotechnology

Synthesis of MnO2-CuO-Fe2O3/CNTs catalysts: low-temperature SCR activity and formation mechanism

Yanbing Zhang et al.

BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2019)

Article Chemistry, Physical

Effective Ce-based catalysts deposition on ceramic open cell foams

Riccardo Balzarotti et al.

APPLIED CATALYSIS A-GENERAL (2019)

Article Chemistry, Physical

SO2 promoted V2O5-MoO3/TiO2 catalyst for NH3-SCR of NOx at low temperatures

Yunfan Xu et al.

APPLIED CATALYSIS A-GENERAL (2019)

Article Energy & Fuels

Low-temperature flue gas denitration with transition metal oxides supported on biomass char

Jie Yang et al.

JOURNAL OF THE ENERGY INSTITUTE (2019)

Article Chemistry, Physical

TRA and DRIFTS studies of the fast SCR reaction over CeO2/TiO2 catalyst at low temperatures

Li Cao et al.

APPLIED CATALYSIS A-GENERAL (2018)

Article Chemistry, Physical

Catalytic upgrading of ethanol to n-butanol over M-CeO2/AC (M = Cu, Fe, Co, Ni and Pd) catalysts

Xianyuan Wu et al.

CATALYSIS COMMUNICATIONS (2017)

Article Engineering, Environmental

Hollow MnOx-CeO2 mixed oxides as highly efficient catalysts in NO oxidation

Qun Shen et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Article Chemistry, Physical

The deactivation of Ce/TiO2 catalyst for NH3-SCR reaction by alkali metals: TPD and DRIFT studies

Shu-xian Wang et al.

CATALYSIS COMMUNICATIONS (2017)

Article Engineering, Chemical

Effect of V2O5 Additive on the SO2 Resistance of a Fe2O3/AC Catalyst for NH3-SCR of NOx at Low Temperatures

Weiwei Yang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)

Article Chemistry, Physical

DFT insights into the adsorption of NH3-SCR related small gases in Mn-MOF-74

Minhua Zhang et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)

Review Chemistry, Physical

Ceria-based catalysts for low-temperature selective catalytic reduction of NO with NH3

Changjin Tang et al.

CATALYSIS SCIENCE & TECHNOLOGY (2016)

Article Chemistry, Physical

Performance impact and poisoning mechanism of arsenic over commercial V2O5-WO3/TiO2 SCR catalyst

Ming Kong et al.

CATALYSIS COMMUNICATIONS (2015)

Article Engineering, Chemical

Effect of SO2 on Activated Carbon Honeycomb Supported CeO2-MnOx Catalyst for NO Removal at Low Temperature

Yanli Wang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)

Article Engineering, Environmental

Activated carbon fibers loaded with MnO2 for removing NO at room temperature

Mingxi Wang et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Article Engineering, Chemical

Multiple Roles of SO2 in Selective Catalytic Reduction of NO by NH3 over V2O5/AC Catalyst

Pan Li et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)

Article Chemistry, Physical

Highly dispersed CeO2 on carbon nanotubes for selective catalytic reduction of NO with NH3

Cheng Fang et al.

CATALYSIS SCIENCE & TECHNOLOGY (2013)

Article Chemistry, Physical

The influence of sulfur dioxide and water on the performance of a marine SCR catalyst

Mathias Magnusson et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2012)

Article Chemistry, Physical

Low-temperature SCR of NO with NH3 over CeO2 supported on modified activated carbon fibers

Lili Zhu et al.

CATALYSIS COMMUNICATIONS (2011)

Article Chemistry, Multidisciplinary

A superior catalyst for low-temperature NO reduction with NH3

GS Qi et al.

CHEMICAL COMMUNICATIONS (2003)