☆ 4.6 Review

Critical Review of Comparative Study of Selective Laser Melting and Investment Casting for Thin-Walled Parts

MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Review Cardiac & Cardiovascular Systems

Shaping the Future of Cardiovascular Disease by 3D Printing Applications in Stent Technology and its Clinical Outcomes

Muneeb Ullah et al.

Summary: 3D printing technology has brought innovation in the field of cardiovascular medicine, especially in the management of cardiovascular disease (CVD). It has revolutionized the design and fabrication of intravascular stents, providing tailored solutions for complex anatomies and individualized patient needs. The advantages of 3D-printed stents include improved biocompatibility, enhanced mechanical properties, and reduced risk of restenosis. However, there are regulatory considerations and challenges in implementing 3D-printed stents in clinical practice.

CURRENT PROBLEMS IN CARDIOLOGY (2024)

Add to Collection

Article Automation & Control Systems

Effects of process parameters on friability and surface quality in the rapid investment casting process

Konstantin Fedorov et al.

Summary: This research investigates surface erosion of ceramic shells in the rapid investment casting (RIC) process using a friability test and microscopy analysis. The impact of different pattern materials, shell facecoat composition, and burnout temperature is explored. Results show that among 3D printing feedstock, ABS produces the most surface erosion, while PVB is the least and is comparable to conventional foundry wax. The absence of stucco in the facecoat reduces friability, and burnout temperature has a varying effect on friability depending on the pattern material.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2023)

Add to Collection

Review Materials Science, Multidisciplinary

Current Status and Challenges of Powder Bed Fusion-Based Metal Additive Manufacturing: Literature Review

Naol Dessalegn Dejene et al.

Summary: Powder bed fusion (PBF) is a common additive manufacturing technology for fabricating complex geometries using various materials, however the quality and reliability of parts produced by this technology are crucial aspects. This study focuses on selective laser melting (SLM) and discusses the present state of the art and technological challenges in PBF. The review work highlights the status and challenges of PBF metal-based AM, with a focus on process parameters and flaws that affect part quality and reliability.

METALS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Analyzing the influence of the investment casting process parameters on microstructure and mechanical properties of open-pore Al-7Si foams

Mahan Firoozbakht et al.

Summary: This study investigates the influence of microstructure tuning on the mechanical properties of aluminum-silicon alloy foams. It is found that by reducing the mold temperature, the microstructure of the cast struts can be improved, resulting in higher ductility and energy absorption efficiency. However, declining mold filling has a negative effect on the overall mechanical properties.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Add to Collection

Article Engineering, Manufacturing

Recoater-Induced Distortions and Build Failures in Selective Laser Melting of Thin-Walled Ti6Al4V Parts

Xufei Lu et al.

Summary: This study investigates the challenges of residual stresses, warpage, and recoater crashes in selective laser melting (SLM) of thin-walled structures. It develops a numerical model to simulate the SLM process and enhances it with recoater effects. The study finds that higher laser energy input results in larger residual stresses and warpage, leading to recoater crashes. Potential solutions to mitigate warpage and recoater crashes are assessed using the validated model.

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2023)

Add to Collection

Review Engineering, Biomedical

4D Printing in Biomedical Engineering: Advancements, Challenges, and Future Directions

Maziar Ramezani et al.

Summary: 4D printing is a transformative technology in biomedical engineering with potential applications in tissue engineering, drug delivery, medical devices, and diagnostics. This review paper provides a comprehensive analysis of the advancements, challenges, and future directions of 4D printing in this field. The development of smart materials and various fabrication techniques are discussed, along with the persisting challenges related to material limitations, fabrication complexities, and regulatory considerations. The future of 4D printing in biomedical engineering lies in material innovations, fabrication advancements, and emerging applications such as personalised medicine, nanomedicine, and bioelectronic devices.

JOURNAL OF FUNCTIONAL BIOMATERIALS (2023)

Add to Collection

Article

Design for Additive Manufacturing: Recent Innovations and Future Directions

Paul F. Egan

Designs (2023)

Add to Collection

Article Green & Sustainable Science & Technology

Simulation Analysis of Stress Field of Walnut Shell Composite Powder in Laser Additive Manufacturing Forming

Yueqiang Yu et al.

Summary: A calculation model of stress field in laser additive manufacturing of walnut shell composite powder was established, and the stress field was simulated by the sequential coupling method. The experimental results were in good agreement with the simulation results, and the distribution and variation of stress and strain field were obtained.

JOURNAL OF RENEWABLE MATERIALS (2023)

Add to Collection

Article Optics

Porosity, microstructure and mechanical property of welded joints produced by different laser welding processes in selective laser melting AlSi10Mg alloys

Li Cui et al.

Summary: The susceptibility to hydrogen pores in the welded joints of SLM AlSi10Mg alloys was investigated through different welding methods. It was found that autogenous laser welding and single-pass laser welding had a high sensitivity to hydrogen pores, while LMD welding effectively reduced the size and porosity of the pores. SLM AlSi10Mg alloys exhibited lower hardness and ultimate tensile strength in laser welding compared to LMD welding, which can be attributed to the refined microstructures and reduced hydrogen pores in the welded metal.

OPTICS AND LASER TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

Effects of Power and Laser Speed on the Mechanical Properties of AlSi7Mg0.6 Manufactured by Laser Powder Bed Fusion

Sebastien Vaudreuil et al.

Summary: The AlSi7Mg0.6 alloy is commonly used in LPBF for aerospace engineering parts with complex geometries. This study evaluated the influence of laser parameters on mechanical properties and identified an optimal processing region. Results showed that laser power and scanning speed had a significant impact on mechanical properties, while the laser strategy had limited influence. Surface plots revealed a region of higher mechanical properties when using specific energy densities. Optimal performance was achieved by combining mid-speed and power within this region.

MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Roadmap: Numerical-Experimental Investigation and Optimization of 3D-Printed Parts Using Response Surface Methodology

Hamid Reza Vanaei et al.

Summary: By considering important variables, such as temperature and mechanical characteristics, the fused filament fabrication process can be optimized. Through numerical-experimental methods, the influence of variables on product quality was investigated. By applying the optimized data, favorable adhesion and improved process quality can be achieved in the FFF process.

MATERIALS (2022)

Add to Collection

Review Engineering, Manufacturing

A review on metal additive manufacturing for intricately shaped aerospace components

Vaishnav Madhavadas et al.

Summary: Additive manufacturing is a rapidly growing industrial technique that brings innovative solutions to various manufacturing problems. In the aerospace industry, additive manufacturing is particularly advantageous for producing complex structures and alloys with a high strength-to-weight ratio. This review comprehensively discusses the application of additive manufacturing in the aerospace industry, including different techniques, comparison with conventional methods, and future prospects.

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Engineering, Manufacturing

Study of SLA Printing Parameters Affecting the Dimensional Accuracy of the Pattern and Casting in Rapid Investment Casting

Nazym Badanova et al.

Summary: In Rapid Investment Casting, the dimensional accuracy and geometric characteristics of manufactured parts are crucial for product assembly. This study focuses on the effect of SLA printing parameters, such as layer thickness and build angle, on the accuracy of Castable Wax printed patterns and Al cast parts. The study found that build angle and layer thickness were the most impactful parameters, affecting both the dimensional and geometric accuracy.

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review

Niloofar Sanaei et al.

Summary: Additive manufacturing is emerging as an alternative method for producing unique and complex parts, with fatigue performance being a key consideration. Defects such as Lack of Fusion, porosities, and un-melted particles can affect fatigue performance, but can be minimized through process optimization and post-processing. Analytical techniques can reduce the need for costly fullscale testing for assessing reliability in fatigue performance.

PROGRESS IN MATERIALS SCIENCE (2021)

Add to Collection

Review Chemistry, Physical

Current Trends in Automotive Lightweighting Strategies and Materials

Frank Czerwinski

Summary: The automotive lightweighting trends are driven by sustainability, cost, and performance, generating a high demand for lightweight materials and design concepts in modern mobility and transportation as part of circular economy solutions. Current strategies focus not only on weight reduction, but also on structural efficiency, economic and environmental impacts, and guidelines for materials selection, substitution rules, and multi-material design paradigm to address global R&D activities and industry transition.

MATERIALS (2021)

Add to Collection

Article Crystallography

Analysis of Microstructure and Mechanical Properties in As-Built/As-Cast and Heat-Treated Conditions for IN718 Alloy Obtained by Selective Laser Melting and Investment Casting Processes

Juan Carlos Pereira et al.

Summary: This study analyzed new customized heat treatments for IN718 alloy parts produced by selective laser melting (SLM), compared the microstructure and mechanical properties with those reported in literature, and discussed the differences in strengthening mechanisms between SLM and investment casting. The results show that the fine and homogeneous microstructure obtained from SLM processing, along with specific strengthening mechanisms, allow for superior mechanical properties compared to standard heat treatment used in investment casting.

CRYSTALS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Metal additive manufacturing in aerospace: A review

Byron Blakey-Milner et al.

Summary: Metal additive manufacturing in aerospace industry offers significant opportunities for cost reduction, material innovation, design flexibility, and lightweighting. The technology not only enhances performance but also simplifies design and manufacturing processes.

MATERIALS & DESIGN (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Best of Both Worlds: Synergistically Derived Material Properties via Additive Manufacturing of Nanocomposites

Mia Carrola et al.

Summary: The combination of nanomaterials and additive manufacturing can bring impressive properties, but achieving cooperative synergistic effects and novel material properties requires deeper research. By studying the cooperative effects at processing, morphological, and architectural levels, material performance can be improved, emerging properties explored, and the additive manufacturing process enhanced.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Environmental analysis of selective laser melting in the manufacturing of aeronautical turbine blades

Sharon Torres-Carrillo et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Comparison of AlSi7Mg0.6 alloy obtained by selective laser melting and investment casting processes: Microstructure and mechanical properties in as-built/as-cast and heat-treated conditions

Juan Carlos Pereira et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Engineering, Manufacturing

CoCr alloy processed by Selective Laser Melting (SLM): effect of Laser Energy Density on microstructure, surface morphology, and hardness

Lavinia Tonelli et al.

Journal of Manufacturing Processes (2020)

Add to Collection

Article Automation & Control Systems

Exploring the fabrication limits of thin-wall structures in a laser powder bed fusion process

Ziheng Wu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Review Chemistry, Analytical

Application of Stereolithography Based 3D Printing Technology in Investment Casting

Muslim Mukhtarkhanov et al.

MICROMACHINES (2020)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Powder bed fusion process in additive manufacturing: An overview

Riya Singh et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Add to Collection

Review Pharmacology & Pharmacy

Shaping the future: recent advances of 3D printing in drug delivery and healthcare

Sarah J. Trenfield et al.

EXPERT OPINION ON DRUG DELIVERY (2019)

Add to Collection

Article Automation & Control Systems

Effect of substrate material on the molten pool characteristics in selective laser melting of thin wall parts

Shiwen Liu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Fatigue performance of selective laser melted Ti6Al4V components: state of the art

Behzad Fotovvati et al.

MATERIALS RESEARCH EXPRESS (2019)

Add to Collection

Article Engineering, Mechanical

Fatigue characteristics of steels manufactured by selective laser melting

Shahriar Afkhami et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

Add to Collection

Proceedings Paper Engineering, Manufacturing

Design and Topology Optimization of 3D-Printed Wax Patterns for Rapid Investment Casting

Jiayi Wang et al.

47TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 47) (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Metal Alloys for Fusion-Based Additive Manufacturing

Duyao Zhang et al.

ADVANCED ENGINEERING MATERIALS (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Solid State Porous Metal Production: A Review of the Capabilities, Characteristics, and Challenges

Mark A. Atwater et al.

ADVANCED ENGINEERING MATERIALS (2018)

Add to Collection

Review Engineering, Multidisciplinary

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

Tuan D. Ngo et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Engineering, Manufacturing

The influence of scan length on fabricating thin-walled components in selective laser melting

Zhonghua Li et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)

Add to Collection

Article Engineering, Multidisciplinary

Investigations for mechanical properties and biocompatibility of SS-316L implant prepared as rapid investment casting for batch production

Jaspreet Singh et al.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2018)

Add to Collection

Review Engineering, Manufacturing

Development and surface improvement of FDM pattern based investment casting of biomedical implants: A state of art review

Daljinder Singh et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

Add to Collection

Article Engineering, Industrial

Opportunities and challenges of quality engineering for additive manufacturing

Bianca M. Colosimo et al.

JOURNAL OF QUALITY TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Physical

Study of Size Effect on Microstructure and Mechanical Properties of AlSi10Mg Samples Made by Selective Laser Melting

Zhichao Dong et al.

MATERIALS (2018)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

A Review On Transition In The Manufacturing Of Mechanical Components From Conventional Techniques To Rapid Casting Using Rapid Prototyping

P. Alen Thomas et al.

MATERIALS TODAY-PROCEEDINGS (2018)

Add to Collection

Article Engineering, Industrial

Structural components manufactured by Selective Laser Melting and Investment Casting-Impact of the process route on the damage mechanism under cyclic loading

S. Leuders et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)

Add to Collection

Article Engineering, Industrial

Modeling of shrinkage during investment casting of thin-walled hollow turbine blades

Y. W. Dong et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)

Add to Collection

Article Metallurgy & Metallurgical Engineering

The role and impact of 3D printing technologies in casting

Jin-wu Kang et al.

CHINA FOUNDRY (2017)

Add to Collection

Review Engineering, Manufacturing

Precision investment casting: A state of art review and future trends

Sunpreet Singh et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)

Add to Collection

Proceedings Paper Physics, Applied

Additive Manufacturing Metrology: State of the Art and Needs Assessment

L. Koester et al.

42ND ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION: INCORPORATING THE 6TH EUROPEAN-AMERICAN WORKSHOP ON RELIABILITY OF NDE (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Prediction of Shrinkage Porosity in Femoral Stem of Titanium Investment Casting

Sutiyoko et al.

ARCHIVES OF FOUNDRY ENGINEERING (2016)

Add to Collection

Article Automation & Control Systems

Computer-aided modeling and experimental verification of optimal gating system design for investment casting of precision rotor

Pei-Hsing Huang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)

Add to Collection

Article Engineering, Industrial

Selective laser melting for manufacturing of thin-walled porous elements

Eberhard Abele et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Selective Laser Melting Technique of Co-Cr Dental Alloys: A Review of Structure and Properties and Comparative Analysis with Other Available Techniques

Theodoros Koutsoukis et al.

JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2015)

Add to Collection

Review Engineering, Mechanical

Differences in microstructure and properties between selective laser melting and traditional manufacturing for fabrication of metal parts: A review

Bo Song et al.

FRONTIERS OF MECHANICAL ENGINEERING (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting

Chunze Yan et al.

MATERIALS & DESIGN (2014)

Add to Collection

Proceedings Paper Engineering, Mechanical

Finite Element Analysis to Improve the Accuracy of Parts Made by Stainless Steel 316L Material Using Selective Laser Melting Technology

Razvan Pacurar et al.

ENGINEERING SOLUTIONS AND TECHNOLOGIES IN MANUFACTURING (2014)

Add to Collection

Article Biochemistry & Molecular Biology

Surface Properties and Corrosion Behavior of Co-Cr Alloy Fabricated with Selective Laser Melting Technique

Xian-zhen Xin et al.

CELL BIOCHEMISTRY AND BIOPHYSICS (2013)

Add to Collection

Article Materials Science, Ceramics

On the Origin of Metallurgical Technologies in the Bronze Age

G. G. Gnesin

POWDER METALLURGY AND METAL CERAMICS (2013)

Add to Collection

Article Engineering, Mechanical

The corrosive effects of artificial saliva on cast and rapid manufacture-produced cobalt chromium alloys

Frank Alifui-Segbaya et al.

RAPID PROTOTYPING JOURNAL (2013)

Add to Collection

Review Engineering, Industrial

Developments in investment casting process-A review

Sarojrani Pattnaik et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Development of a New Ferrous Aluminosilicate Refractory Material for Investment Casting of Aluminum Alloys

Chen Yuan et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)

Add to Collection

Article Automation & Control Systems

Efficacy of powder-based three-dimensional printing (3DP) technologies for rapid casting of light alloys

Simranpreet Singh Gill et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)

Add to Collection

Article Chemistry, Physical

Parametric analysis of the selective laser melting process

I. Yadroitsev et al.

APPLIED SURFACE SCIENCE (2007)

Add to Collection

Article Engineering, Mechanical

Advances in three dimensional printing - state of the art and future perspectives

D. Dimitrov et al.

RAPID PROTOTYPING JOURNAL (2006)

Add to Collection

Review Automation & Control Systems

Rapid prototyping and tooling techniques: a review of applications for rapid investment casting

CM Cheah et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2005)

Add to Collection

Article Engineering, Industrial

Effects of casting process variables on the residual stress in Ni-base superalloys

H Farhangi et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Casting of Ti prostheses and implants with the aid of numerical simulation

M Wu et al.

JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.