4.7 Article

Achieving enhanced cryogenic toughness in a 1 GPa grade HSLA steel through reverse transformation of martensite

Journal

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
Volume 27, Issue -, Pages 6696-6708

Publisher

ELSEVIER
DOI: 10.1016/j.jmrt.2023.11.154

Keywords

Reverse transformation; Martensitic microstructure; Impact toughness; Crack propagation; Cryogenic toughening

Ask authors/readers for more resources

The effect of microstructure on crack resistance and cryogenic toughening in a 3.5 wt% Ni high-strength low-alloy (HSLA) steel was investigated. The results show that lamellarization treatment significantly improves impact toughness and reduces ductile-brittle transition temperature. This improvement is attributed to the refinement of martensitic block size and the increase in high angle grain boundaries.
The effect of microstructure on crack resistance and cryogenic toughening in a 3.5 wt% Ni high-strength low-alloy (HSLA) steel was investigated. Multistage heat treatments involving quenching (Q), lamellarization (L), and tempering (T) were applied to prepare the HSLA steels with various microstructures, focusing on the reverse transformation and reconfiguration of martensite, as well as its influence on impact crack formation and prop-agation behavior by multi-scale characterizations. The results indicate that lamellarization treatment has little influence on tensile properties, but significantly improves impact toughness in the QL and QLT specimens, which exhibit over 30 % increment in Charpy V-notch (CVN) absorbed energy Et tested in range from RT to-196 degrees C, over 25 degrees C decrement in ductile-brittle transition temperature (DBTT), and much higher crack propagation energy Ep and higher ratio of Ep/Et, as compared with the as-quenched (AQ) and QT specimens. The lamellari-zation treatment also contributes to a significant refinement effect on martensitic block size, caused by fresh martensite transformation from the reversed austenite, resulting in an increment in high angle grain boundaries (HAGBs), with introduction of a small amount of retained austenite (RA) as well. Therefore, the impact crack resistance and cryogenic toughness is improved in specimens processed with lamellarization treatment, due to the enhancement in crack deflection and hindering effect of the HAGBs, as well as toughening effect by in situ austenite-to-martensite transformation of the RA. Based on the present study, a 1 GPa grade HSLA steel with high ductility and excellent cryogenic toughness can be produced.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available