Related references
Note: Only part of the references are listed.
Article
Thermodynamics
Gao Shu et al.
Summary: Solar energy provides an alternative solution to building energy utilization, addressing the issues of energy conservation and emission reduction. To overcome the fluctuation in energy supply, a latent heat phase change module is designed. Experimental studies on the effects of heating and cooling temperatures on thermal cycles provide guidance for the design of passive building energy utilization.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
(2023)
Article
Thermodynamics
Xinyu Huang et al.
Summary: The melting performance of a rotating triplex-tube latent heat thermal energy storage unit is optimized using the Taguchi design and response surface method. The effects of fin distribution, fin number, and fin material on the melting performance are quantitatively revealed. The optimal design reduces the total melting time and increases the average heat absorption rate compared to the original structure.
Article
Thermodynamics
Siyuan Yang et al.
Summary: The air-conditioning water system deviates from its optimum state under partial load, so it is crucial to dynamically adjust the operating parameters of the equipments in the system to maximize energy efficiency. An improved parallel artificial immune system (IPAIS) algorithm is proposed to determine the optimal parameters under different loads. The algorithm is tested using a simulation experiment on an actual air-conditioning water system, and it achieves superior optimization results compared to other algorithms in terms of convergence, robustness, and computational complexity.
ENERGY CONVERSION AND MANAGEMENT
(2023)
Article
Automation & Control Systems
Anjing Guo et al.
Summary: The gravitational search algorithm is enhanced by utilizing position information of Kbest and Dbest particles, leading to improved exploration and exploitation abilities as well as accelerated convergence rate.
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE
(2023)
Article
Computer Science, Artificial Intelligence
Xiaobing Yu et al.
Summary: Autonomous navigation is crucial for UAVs, especially during disasters. A Hybrid GWO and Differential Evolution (HGWODE) algorithm is developed to address UAV path planning. HGWODE combines GWO and DE algorithms to achieve a balance between exploitation and exploration. The improved positioning equation in HGWODE enhances exploitation by having wolves search strategically around the alpha wolf. The rank-based mutation strategy in the DE algorithm promotes exploitation without compromising exploration. Testing on CEC 2014 and UAV path planning demonstrates that HGWODE outperforms GWO and its variants, providing smoother and shorter paths for UAVs.
EXPERT SYSTEMS WITH APPLICATIONS
(2023)
Article
Mathematics
Iman Faridmehr et al.
Summary: This paper proposes a novel optimization method called the mountaineering team-based optimization (MTBO) algorithm, which is inspired by human cooperation in reaching a mountaintop. The algorithm captures different phases of climbers' movement and incorporates social cooperation to solve optimization problems. The algorithm outperforms state-of-art metaheuristic methods and exhibits robustness, ease of implementation, and faster convergence to optimal global solutions for a wide range of real-world test functions.
Article
Engineering, Multidisciplinary
Mohamed Abdel-Basset et al.
Summary: Due to the increasing complexity of optimization problems, deterministic and heuristic approaches are insufficient. Metaheuristics, particularly the Young's Double-Slit Experiment (YDSE) optimizer proposed in this paper, have emerged as effective alternatives. The YDSE optimizer is inspired by Young's double-slit experiment in classical physics and balances exploration and exploitation using constructive and destructive interference. Through comparisons with other metaheuristics on various benchmarks, it has proven superior performance and outperformed previous winners. Published by Elsevier B.V.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
(2023)
Article
Automation & Control Systems
Emine Bas
Summary: The optimization process aims to find the best values for system characteristics to minimize the cost of system design. Optimization approaches have been successful in addressing discrete and unconstrained problems in artificial intelligence and machine learning. The Aquila Optimizer (AO) is a heuristic algorithm based on swarm intelligence that mimics the natural behavior of the Aquila. A new algorithm, BAO, is proposed for binary optimization problems and shows promising results compared to other recent heuristic algorithms.
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE
(2023)
Article
Construction & Building Technology
Xinyu Huang et al.
Summary: Latent heat storage technology is important for utilizing clean energy in building heating, but the low thermal conductivity of heat storage medium hinders its large-scale application. This paper investigates the solidification performance of a triplex-tube latent heat thermal energy storage unit using the rotation mechanism. Different design optimization methods are employed for in-depth analysis. The results show that the optimized structure significantly improves heat release rate and reduces solidification time.
ENERGY AND BUILDINGS
(2023)
Article
Thermodynamics
Fatima Belabbes et al.
Summary: The accurate extraction of photovoltaic cells and panels parameters is crucial for energy forecasting and power point identification. This paper proposes the usage of the Snake optimization algorithms to extract parameters of three types of photovoltaic cells. The Snake algorithm outperforms several others, and an improved version is developed with better results. The improved snake algorithm reduces computational time and is one of the best algorithms for parameter extraction.
ENERGY CONVERSION AND MANAGEMENT
(2023)
Article
Thermodynamics
Zhao Du et al.
Summary: This study focuses on improving the thermal conductivity of phase change materials in order to enhance the performance of a square latent heat storage device. The addition of fin and foam metal reduces the complete melting time of the phase change materials and increases temperature uniformity. However, it also leads to a decrease in total heat storage. Dynamic temperature studies further investigate the effect of fins and metal foam on the internal melting process.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
(2023)
Article
Energy & Fuels
Ze Li et al.
Summary: Currently, the energy consumption of the parallel chillers system is a significant portion of the total energy consumption of central air conditioning system. To address this issue, an improved sparrow search algorithm (TMSSA) is proposed to reduce energy consumption and carbon emissions. The TMSSA algorithm enhances population diversity and convergence speed through initializing the population using Tent chaotic map, improves randomness and local search ability with a Levy flight mechanism, and increases robustness through Gaussian mutation method. The algorithm is proven to be highly accurate, fast-converging, and robust with excellent energy-saving performance.
Article
Thermodynamics
Jae-Hee Lee et al.
Summary: In heat-pump-driven liquid-desiccant (HPLD) air-conditioning systems, optimizing capacity matching and releasing extra condensing heat are crucial for dehumidification performance, operational feasibility, and system stability. This study conducted a multi-objective optimization to simultaneously maximize system coefficient of performance (COP) and minimize a capacity-matching index of extra condenser. The results showed that the air and solution flow rates of the regenerator should be higher and lower, respectively, than those of the absorber. The optimum temperature of the absorber inlet solution was around 18 degrees C, while the temperature of the regenerator inlet solution was significantly influenced by the decision-making scenario. The system COP increased by 24% and the capacity-matching index of extra condenser decreased by 55% compared to the initial values.
APPLIED THERMAL ENGINEERING
(2023)
Article
Thermodynamics
Junyan Han et al.
Summary: Given the challenges of grid management, it is crucial to develop energy management systems that optimize resource performance and enable control of power exchange with the grid. This article proposes a two-objective optimization model that incorporates demand response and integrated energy systems, taking into account economic and energy efficiency benefits. A two-stage modeling and solution approach is used, and a multi-objective grasshopper optimization algorithm (GOA) is developed to improve energy generation and transfer efficiency.
APPLIED THERMAL ENGINEERING
(2023)
Article
Thermodynamics
Xianzhong Chen et al.
Summary: In this study, an optimization control method based on knowledge and operational data was investigated for a centralized water-cooling heat dissipation system in a data center. A numerical model was established to describe the system, and thermal characteristic parameters were extracted and identified using real-time operational data. The model accuracy was validated with actual data, and the water flow rate of the system was optimized to improve the average PUE. A prediction model combining heat transfer mechanisms was developed, and machine learning algorithms were applied to establish neural networks for real-time optimization and prediction based on operational data.
APPLIED THERMAL ENGINEERING
(2023)
Article
Thermodynamics
Qiu-Yu Wang et al.
Summary: This paper proposes a novel model for the optimal scheduling of multi-energy microgrid (MEM) systems using renewable energy sources. The model incorporates emerging technologies such as electric vehicle parking lots, power-to-gas facilities, and demand response programs. The goal is to minimize operational costs and maximize profits through energy exchanges in electricity, heat, and gas markets. Simulation results demonstrate a significant reduction in total operating costs by integrating new technologies and multi-energy storage systems.
APPLIED THERMAL ENGINEERING
(2023)
Article
Thermodynamics
Jinshi Wang et al.
Summary: This study proposes a distributed multi-energy system (DMES) with renewable energy and energy storage technologies for urban development. A multi-objective cooptimization framework is used to address the design complexities of DMES. The results show that the improved NSGA-II algorithm can obtain a more uniform Pareto frontier and that renewable energy devices have a significant impact on the energy supply system.
APPLIED THERMAL ENGINEERING
(2023)
Article
Energy & Fuels
Fangfei Li et al.
Summary: In this study, the flip mechanism is applied to improve the characteristics of uneven melting in the melting process of the triplex-tube latent heat energy storage unit. Numerical simulation is used and verified by experimental data. The results show that a single flip can significantly improve the melting performance of the unit under different dimensionless times. However, the flip has a negative effect on the total heat absorption in one melting cycle. The addition of flip effectively reduces the negative influence of the hard-to-melt zone during the melting process.
Article
Thermodynamics
Zhikun Gao et al.
Summary: An improved parallel particle swarm optimization (IPPSO) algorithm is proposed for the optimal chiller loading problem in parallel chillers system. Experimental results show that the algorithm has significant advantages in energy-saving effect and convergence speed.
INTERNATIONAL JOURNAL OF REFRIGERATION
(2022)
Article
Computer Science, Artificial Intelligence
Changting Zhong et al.
Summary: The proposed comprehensive learning Harris hawks equilibrium optimization (CLHHEO) algorithm enhances the convergence and exploration capacity of HHO by incorporating comprehensive learning, equilibrium optimizer, and terminal replacement mechanism. Experimental results show that CLHHEO outperforms HHO and other state-of-the-art metaheuristic algorithms in terms of solution quality for both unconstrained and constrained optimization problems.
EXPERT SYSTEMS WITH APPLICATIONS
(2022)
Article
Computer Science, Interdisciplinary Applications
Jeng-Shyang Pan et al.
Summary: This paper introduces a new nature-inspired metaheuristic algorithm called the gannet optimization algorithm (GOA). By mathematizing the behaviors of gannets, GOA is able to explore and exploit in large-scale constrained optimization problems, providing better solutions. Experimental results show that GOA has shorter running time in high dimensions and is suitable for many constrained engineering design problems.
MATHEMATICS AND COMPUTERS IN SIMULATION
(2022)
Article
Computer Science, Artificial Intelligence
Changting Zhong et al.
Summary: This paper presents a novel swarm-based metaheuristic algorithm called beluga whale optimization (BWO), which is inspired by the behaviors of beluga whales, for solving optimization problems. BWO consists of three phases: exploration, exploitation, and whale fall, corresponding to pair swim, prey, and whale fall behaviors, respectively. The self-adaptive balance factor and probability of whale fall in BWO play significant roles in controlling the exploration and exploitation capabilities. Additionally, Levy flight is introduced to enhance the global convergence in the exploitation phase. The effectiveness of BWO is evaluated using 30 benchmark functions and compared with 15 other metaheuristic algorithms through qualitative, quantitative, and scalability analysis. The results show that BWO is a competitive algorithm for solving unimodal and multimodal optimization problems. Furthermore, BWO achieves the first overall rank in the scalability analysis of benchmark functions among the compared metaheuristic algorithms. Four engineering problems are also solved to demonstrate the merits and potential of BWO in solving complex real-world optimization problems. The source code of BWO is publicly available.
KNOWLEDGE-BASED SYSTEMS
(2022)
Article
Thermodynamics
Zhiguang He et al.
Summary: This paper studied the optimization of the integrated heat pipe cooling system in terms of energy consumption, establishing heat transfer and energy consumption models as well as calculating energy efficiency optimization strategies using genetic algorithms. The energy efficiency of the system was significantly improved through the optimization process, demonstrating the potential for energy savings in data center cooling systems.
APPLIED THERMAL ENGINEERING
(2021)
Article
Computer Science, Information Systems
Qiang Lu et al.
Summary: The SPJ-GEP algorithm maintains population diversity and enhances accuracy in solving symbolic regression problems by efficiently jumping between subspaces. It does not significantly increase computational complexity compared to traditional GEP methods, and evaluation results indicate improved accuracy compared to baseline methods.
INFORMATION SCIENCES
(2021)
Article
Engineering, Multidisciplinary
Laith Abualigah et al.
Summary: The Arithmetic Optimization Algorithm (AOA) is a new meta-heuristic method that makes use of the distribution behavior of arithmetic operators, demonstrating promising results in solving challenging optimization problems across various search spaces.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
(2021)
Article
Computer Science, Artificial Intelligence
Jui-Sheng Chou et al.
APPLIED SOFT COMPUTING
(2020)
Article
Construction & Building Technology
Jiangyan Liu et al.
ENERGY AND BUILDINGS
(2020)
Article
Computer Science, Theory & Methods
Shimin Li et al.
FUTURE GENERATION COMPUTER SYSTEMS-THE INTERNATIONAL JOURNAL OF ESCIENCE
(2020)
Article
Computer Science, Artificial Intelligence
Saumya Bansal et al.
APPLIED SOFT COMPUTING
(2020)
Article
Automation & Control Systems
Jiankai Xue et al.
SYSTEMS SCIENCE & CONTROL ENGINEERING
(2020)
Article
Computer Science, Interdisciplinary Applications
Zhi-Xin Zheng et al.
MATHEMATICS AND COMPUTERS IN SIMULATION
(2019)
Article
Computer Science, Artificial Intelligence
Gaurav Dhiman et al.
KNOWLEDGE-BASED SYSTEMS
(2019)
Article
Computer Science, Theory & Methods
Ali Asghar Heidari et al.
FUTURE GENERATION COMPUTER SYSTEMS-THE INTERNATIONAL JOURNAL OF ESCIENCE
(2019)
Article
Automation & Control Systems
Pei-yong Duan et al.
OPTIMAL CONTROL APPLICATIONS & METHODS
(2018)
Article
Construction & Building Technology
Zhi-xin Zheng et al.
ENERGY AND BUILDINGS
(2018)
Article
Computer Science, Interdisciplinary Applications
Seyedali Mirjalili et al.
ADVANCES IN ENGINEERING SOFTWARE
(2016)
Article
Energy & Fuels
Gokhan Aydin et al.
ENERGY SOURCES PART B-ECONOMICS PLANNING AND POLICY
(2016)
Article
Computer Science, Artificial Intelligence
Seyedali Mirjalili
KNOWLEDGE-BASED SYSTEMS
(2016)
Article
Energy & Fuels
Gokhan Aydin et al.
ENERGY SOURCES PART B-ECONOMICS PLANNING AND POLICY
(2016)
Article
Computer Science, Interdisciplinary Applications
Seyedali Mirjalili et al.
ADVANCES IN ENGINEERING SOFTWARE
(2014)
Article
Thermodynamics
Leandro dos Santos Coelho et al.
Article
Construction & Building Technology
Ching-Liang Chen et al.
ENERGY AND BUILDINGS
(2014)
Article
Construction & Building Technology
Leandro dos Santos Coelho et al.
ENERGY AND BUILDINGS
(2013)
Article
Computer Science, Interdisciplinary Applications
Hadi Eskandar et al.
COMPUTERS & STRUCTURES
(2012)
Article
Computer Science, Software Engineering
R. V. Rao et al.
COMPUTER-AIDED DESIGN
(2011)
Article
Construction & Building Technology
Wen-Shing Lee et al.
ENERGY AND BUILDINGS
(2011)
Article
Thermodynamics
Yan-Yue Lu et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID
(2011)
Article
Computer Science, Artificial Intelligence
Joaquin Derrac et al.
SWARM AND EVOLUTIONARY COMPUTATION
(2011)
Article
Computer Science, Artificial Intelligence
Yuhui Shi
INTERNATIONAL JOURNAL OF SWARM INTELLIGENCE RESEARCH
(2011)
Article
Thermodynamics
Wen-Shing Lee et al.
APPLIED THERMAL ENGINEERING
(2009)
Article
Computer Science, Interdisciplinary Applications
Bassem Jarboui et al.
COMPUTERS & OPERATIONS RESEARCH
(2009)
Article
Computer Science, Information Systems
Esmat Rashedi et al.
INFORMATION SCIENCES
(2009)
Article
Construction & Building Technology
A. Jahanbani Ardakani et al.
ENERGY AND BUILDINGS
(2008)
Article
Operations Research & Management Science
Dervis Karaboga et al.
JOURNAL OF GLOBAL OPTIMIZATION
(2007)
Article
Thermodynamics
Yung-Chung Chang
Article
Thermodynamics
YC Chang
APPLIED THERMAL ENGINEERING
(2005)
Article
Construction & Building Technology
YC Chang et al.
ENERGY AND BUILDINGS
(2005)
Article
Engineering, Electrical & Electronic
YC Chang
ELECTRIC POWER SYSTEMS RESEARCH
(2004)
