Journal
ULTRASONICS
Volume 137, Issue -, Pages -Publisher
ELSEVIER
DOI: 10.1016/j.ultras.2023.107201
Keywords
Resonance stability; Cascaded transducer; Nitinol; Non-linear dynamics; Self-heating experiment
Ask authors/readers for more resources
This study investigates the use of Nitinol, a shape memory alloy, in a Langevin power ultrasonic transducer to mitigate the influence of temperature on device performance. The results demonstrate that by controlling the microstructure of Nitinol, the nonlinear softening of the piezoelectric stack can be reduced, leading to higher and more stable vibration amplitudes. Furthermore, the use of Nitinol allows for stable resonance frequency and performance even with temperature changes and continuous operation.
Across power ultrasonics and sensing, piezoelectric ultrasonic transducers commonly experience degradation in mechanical, electrical, and dynamic performance due to the relatively high sensitivity of piezoelectric materials to changes in temperature. These changes, arising for example through high excitation voltages or environmental conditions, can lead to nonlinear dynamic behaviours which compromise device performance. To overcome this, the excitation signal to the piezoelectric material is often pulsed, mitigating the influence of temperature rises. However, there remain constraints on suitable candidate piezoelectric materials for power ultrasonic devices. As a novel approach to mitigating the influence of temperature on the properties of piezo-electric materials, the phase-transforming shape memory alloy Nitinol is incorporated into the piezoelectric stack of a Langevin power ultrasonic transducer, in a cascade formation. The underlying principle is that the nonlinear hardening response of Nitinol to rising temperature can be used to dynamically compensate for the nonlinear softening of the piezoelectric materials. Thus, the dynamic response of the transducer can be linearised at elevated excitation levels. In this study, two configurations of Langevin transducer are designed and characterised. One transducer incorporates a Nitinol middle mass, and in the second, titanium. A combination of electrical and thermomechanical characterisation is undertaken, where it is demonstrated that the nonlinear softening of the piezoelectric stack can be mitigated through control of the Nitinol microstructure. The vibration amplitudes of the Nitinol-middle cascaded transducer are higher and more stable when the Nitinol is austenite rather than a combination of martensite and austenite at room temperature. It has also been shown that the vibration amplitude and resonance frequency of Nitinol-middle cascaded transducer remain stable as temperature changes from 20 degrees C to 45 degrees C, dependent of the excitation voltage. Moreover, the self-heating experiment demonstrates the resonance stability of the Nitinol-middle cascaded transducer for continuous operation.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available