☆ 4.7 Article

An infill-based approach towards stiffer auxetic lattices: Design and study of enhanced in-plane elastic properties

MECHANICS OF MATERIALS (2024)

Related references

Note: Only part of the references are listed.

Article Mechanics

Effect of Poisson's ratio on the indentation of open cell foam

O. Duncan et al.

Summary: This study investigates the conformity of conventional and auxetic foam indentation response with classical indentation theory. Foam cubes with dimensions of 20-25 mm were produced, with Poisson's ratios ranging from negative to positive values (-0.35 to 0.3). These cubes were subjected to compression testing and indentation using cylindrical and stud indenters, to a depth of 20% of their thickness. The true strains were measured using digital image correlation to determine the Poisson's ratios and study foam deformation during indentation. By using incremental Poisson's ratios and tangent moduli, the indentation force vs. displacement was measured and calculated. The normalized root mean square errors between the measured and calculated indentation forces were found to be approximately 5% of the measured values. The densification and compression of the foam during indentation increased with the magnitude of the negative Poisson's ratio, potentially exceeding the predictions from indentation theory.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2023)

Add to Collection

Article Engineering, Multidisciplinary

In-plane energy absorption characteristics of a modified re-entrant auxetic structure fabricated via 3D printing

Niranjan Kumar Choudhry et al.

Summary: In this study, the in-plane energy absorption characteristics of modified re-entrant auxetic honeycombs were investigated, showing a 36% improvement in specific energy absorption capacity compared to conventional structures. The introduced nodes with low rotational stiffness contributed to the enhanced energy absorption capacity of the modified structure.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Engineering, Manufacturing

Study on 3D printed auxetic structure-based non-pneumatic tyres (NPT'S)

Narasimhulu Andriya et al.

Summary: This study aims to investigate the 3D printing technique based on FDM using a customized 3D printer and TPU material, and develop auxetic structures for non-pneumatic tyres. Through finite element analysis, it was found that the reentrant hexagonal type auxetic structure is most suitable for city utilitarian vehicles.

MATERIALS AND MANUFACTURING PROCESSES (2022)

Add to Collection

Review Chemistry, Physical

Auxetic Metamaterials for Biomedical Devices: Current Situation, Main Challenges, and Research Trends

Vladislav A. Lvov et al.

Summary: Auxetic metamaterials with a negative Poisson ratio have the properties of lateral expansion when stretched and densification when compressed. Due to their similarity to biological tissues, auxetics have potential applications in the field of medicine. This research study provides a comprehensive overview of auxetic metamaterials in biomedical devices, including prosthetics, orthotics, ergonomic appliances, in vitro medical devices, and tissue engineering scaffolds.

MATERIALS (2022)

Add to Collection

Review Physics, Condensed Matter

Auxetic Materials for Personal Protection: A Review

Danish Tahir et al.

Summary: Life-changing illnesses and fatalities caused by inefficient personal protective clothing and equipment are increasing. The discrepancy between test standards, environmental conditions, and actual collisions is the reason why personal protection equipment and clothing have not reduced injuries in fields such as military and sports. Auxetic materials are suggested as a solution due to their unique properties. This review discusses the importance of auxetic materials in personal protection and explores possible improvements in protection products.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Implementation of periodic boundary conditions for loading of mechanical metamaterials and other complex geometric microstructures using finite element analysis

Luke Mizzi et al.

Summary: The implementation of PBCs is crucial and challenging in computational analysis of structures and materials, especially for complex geometries like mechanical metamaterials. This work analyzes a common PBCs implementation technique and introduces an alternative method for simulating 2D microstructural geometries with quadrilateral unit cells. It also provides a detailed schematic for studying 3D systems using both methods.

ENGINEERING WITH COMPUTERS (2021)

Add to Collection

Article Engineering, Mechanical

A novel hybrid-honeycomb structure: Enhanced stiffness, tunable auxeticity and negative thermal expansion

Xiang-Long Peng et al.

Summary: A novel hybrid-honeycomb structure with enhanced stiffness is proposed, and its effective thermoelastic properties can be widely tunable by tailoring the microstructural geometry and the constituent materials. The structure can be designed to concurrently possess an enhanced stiffness and a high degree of auxeticity and negative thermal expansion by properly choosing the geometrical and material parameters.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Impact behavior of nanoengineered, 3D printed plate-lattices

J. Jefferson Andrew et al.

Summary: The study investigated the low-velocity impact behavior of polymer composite plate-lattices manufactured via fused filament fabrication technology, with results indicating the SC-BCC-FCC nanocomposite plate-lattice providing the most favorable impact response and MWCNT significantly influencing the PPR and HDPE plate-lattices.

MATERIALS & DESIGN (2021)

Add to Collection

Article Nanoscience & Nanotechnology

In-plane dynamic crushing of a novel gradient square honeycomb with enhanced energy absorption

Wei Min Wang et al.

Summary: A novel square honeycomb with rods added to the interior of square cell elements was proposed to improve energy absorption and modify dynamic crushing behavior. Numerical simulations showed that one of the gradient square honeycombs demonstrated the best specific energy absorption at low velocities, while the buffered square honeycomb exhibited the best crushing force efficiency at mid-velocity collisions. Additionally, the slip degree of honeycomb deformation mode was strongly inhibited for one of the novel square honeycombs, showing the zero Poisson ratio effect.

AIP ADVANCES (2021)

Add to Collection

Article Engineering, Multidisciplinary

Numerical modelling of the elastic properties of 3D-printed specimens of thermoplastic matrix reinforced with continuous fibres

E. Polyzos et al.

Summary: Numerical modelling of 3D-printed Fused Filament Fabrication (FFF) specimens with thermoplastic matrices reinforced with continuous fibres, focusing on the elastic properties, revealed good correlation with analytical models for the micro- and meso-scale and with experimental data for the macro-scale, indicating validity and efficiency of the developed approach.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Mechanics

In-plane dynamic response and multi-objective optimization of negative Poisson's ratio (NPR) honeycomb structures with sinusoidal curve

Fengxiang Xu et al.

Summary: By establishing models and conducting optimization designs, this study demonstrates the advantages of sinusoidal NPR honeycomb structures in energy absorption performance, showing that they have better energy absorption performance than traditional honeycomb structures.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Compressive mechanical properties of ex-situ auxetic composite-filled tubes

Yingying Xue et al.

Summary: Auxetic materials are a class of materials that exhibit transverse expansion when longitudinally stretched. Research on new three-component auxetic composite-filled tubes showed that they have superior compressive properties compared to empty tubes and auxetic composites, significantly enhancing energy absorption and delaying crack initiation and propagation.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Mechanics

Mechanical properties of hybrid metamaterial with auxetic chiral cellular structure and silicon filler

Nejc Novak et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Engineering, Aerospace

Deformation behaviors and energy absorption of auxetic lattice cylindrical structures under axial crushing load

Yongguang Guo et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Engineering, Mechanical

On the out-of-plane ballistic performances of hexagonal, reentrant, square, triangular and circular honeycomb panels

Yuanlong Wang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Bioinspired Compliance Grading Motif of Mortar in Nacreous Materials

Jabir Ubaid et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Mechanics

In-plane elasticity of a strengthened re-entrant honeycomb cell

Tarik Baran et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2020)

Add to Collection

Review Materials Science, Biomaterials

The use of auxetic materials in tissue engineering

Paul Mardling et al.

BIOMATERIALS SCIENCE (2020)

Add to Collection

Article Engineering, Mechanical

Geometrically nonlinear dynamic response of eccentrically stiffened circular cylindrical shells with negative poisson's ratio in auxetic honeycombs core layer

Pham Hong Cong et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

Add to Collection

Article Chemistry, Physical

Two-Dimensional Carbon-Based Auxetic Materials for Broad-Spectrum Metal-Ion Battery Anodes

Shuaiwei Wang et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

Add to Collection

Review Instruments & Instrumentation

Perspective of additive manufacturing for metamaterials development

Xin Wu et al.

SMART MATERIALS AND STRUCTURES (2019)

Add to Collection

Article Engineering, Multidisciplinary

Enhanced compressive mechanical properties of aluminum based auxetic lattice structures filled with polymers

Yingying Xue et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Mechanics

Stiffness and Strength of Hexachiral Honeycomb-Like Metamaterials

Thomas Tancogne-Dejean et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Experimental and numerical studies on the compressive mechanical properties of the metallic auxetic reentrant honeycomb

Zhichao Dong et al.

MATERIALS & DESIGN (2019)

Add to Collection

Article Engineering, Mechanical

Nonlinear dynamic response and vibration of sandwich composite plates with negative Poisson's ratio in auxetic honeycombs

Nguyen Dinh Duc et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical behaviors of hierarchical cellular structures with negative Poisson's ratio

Jiahong Hou et al.

JOURNAL OF MATERIALS SCIENCE (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Mechanical metamaterials associated with stiffness, rigidity and compressibility: A brief review

Xianglong Yu et al.

PROGRESS IN MATERIALS SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Novel Negative Poisson's Ratio Lattice Structures with Enhanced Stiffness and Energy Absorption Capacity

Zeyao Chen et al.

MATERIALS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Exploiting negative Poisson's ratio to design 3D-printed composites with enhanced mechanical properties

Tiantian Li et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Physics, Applied

Multi-material 3D printed mechanical metamaterials: Rational design of elastic properties through spatial distribution of hard and soft phases

M. J. Mirzaali et al.

APPLIED PHYSICS LETTERS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Design and modeling of auxetic and hybrid honeycomb structures for in-plane property enhancement

Aniket Ingrole et al.

MATERIALS & DESIGN (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Designing two-dimensional metamaterials of controlled static and dynamic properties

Nikolaos Karathanasopoulos et al.

COMPUTATIONAL MATERIALS SCIENCE (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Impact Testing of Polymer-filled Auxetics Using Split Hopkinson Pressure Bar

Tomas Fila et al.

ADVANCED ENGINEERING MATERIALS (2017)

Add to Collection

Article Mechanics

Bending behavior of sandwich composite structures with tunable 3D-printed core materials

Tiantian Li et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Mechanics

A novel auxetic honeycomb with enhanced in-plane stiffness and buckling strength

Ming-Hui Fu et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Dynamic Crushing Strength Analysis of Auxetic Honeycombs

Xiuhui Hou et al.

ACTA MECHANICA SOLIDA SINICA (2016)

Add to Collection

Article Mechanics

Novel structure with negative Poisson's ratio and enhanced Young's modulus

Zi-Xing Lu et al.

COMPOSITE STRUCTURES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Negative Poisson's Ratio in Single-Layer Graphene Ribbons

Jin-Wu Jiang et al.

NANO LETTERS (2016)

Add to Collection

Article Multidisciplinary Sciences

Self-assembly of coherently dynamic, auxetic, two-dimensional protein crystals

Yuta Suzuki et al.

NATURE (2016)

Add to Collection

Review Engineering, Mechanical

Auxetic Cellular Materials - a Review

Nejc Novak et al.

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Crashworthiness assessment of auxetic foam-filled tube under quasi-static axial loading

S. Mohsenizadeh et al.

MATERIALS & DESIGN (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Tailoring Graphene to Achieve Negative Poisson's Ratio Properties

Joseph N. Grima et al.

ADVANCED MATERIALS (2015)

Add to Collection

Proceedings Paper Engineering, Manufacturing

Experimental investigation on energy absorption of auxetic foam-filled thin-walled square tubes under quasi-static loading

S. Mohsenizadeh et al.

2ND INTERNATIONAL MATERIALS, INDUSTRIAL, AND MANUFACTURING ENGINEERING CONFERENCE, MIMEC2015 (2015)

Add to Collection

Article Materials Science, Composites

Highly oriented carbon fiber-polymer composites via additive manufacturing

Halil L. Tekinalp et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2014)

Add to Collection

Article Materials Science, Textiles

Auxetic materials and their potential applications in textiles

Zhengyue Wang et al.

TEXTILE RESEARCH JOURNAL (2014)

Add to Collection

Article Materials Science, Textiles

Innovative three-dimensional fabric structure with negative Poisson's ratio for composite reinforcement

Zhaoyang Ge et al.

TEXTILE RESEARCH JOURNAL (2013)

Add to Collection

Article Thermodynamics

A Comparative Study of Ballistic Resistance of Sandwich Panels with Aluminum Foam and Auxetic Honeycomb Cores

Shu Yang et al.

ADVANCES IN MECHANICAL ENGINEERING (2013)

Add to Collection

Review Materials Science, Multidisciplinary

Seeing auxetic materials from the mechanics point of view: A structural review on the negative Poisson's ratio

Yunan Prawoto

COMPUTATIONAL MATERIALS SCIENCE (2012)

Add to Collection

Article Materials Science, Textiles

Development of auxetic fabrics using flat knitting technology

Hong Hu et al.

TEXTILE RESEARCH JOURNAL (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Bioinspired Structural Material Exhibiting Post-Yield Lateral Expansion and Volumetric Energy Dissipation During Tension

Lifeng Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2010)

Add to Collection

Article Materials Science, Textiles

Negative Poisson's Ratio Weft-knitted Fabrics

Yanping Liu et al.

TEXTILE RESEARCH JOURNAL (2010)

Add to Collection

Article Engineering, Electrical & Electronic

Auxetic materials for bioprostheses [In the Spotlight]

Fabrizio Scarpa

IEEE SIGNAL PROCESSING MAGAZINE (2008)

Add to Collection

Article Physics, Multidisciplinary

Effect of a negative Poisson ratio in the tension of ceramics

Fan Song et al.

PHYSICAL REVIEW LETTERS (2008)

Add to Collection

Article Physics, Applied

Natrolite: A zeolite with negative Poisson's ratios

Joseph N. Grima et al.

JOURNAL OF APPLIED PHYSICS (2007)

Add to Collection

Article Instruments & Instrumentation

Dynamic properties of high structural integrity auxetic open cell foam

F Scarpa et al.

SMART MATERIALS & STRUCTURES (2004)

Add to Collection

Review Materials Science, Multidisciplinary

On auxetic materials

W Yang et al.

JOURNAL OF MATERIALS SCIENCE (2004)

Add to Collection

Article Engineering, Mechanical

Dynamic crushing of auxetic open-cell polyurethane foam

F Scarpa et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2002)

Add to Collection

Article Materials Science, Multidisciplinary

Auxetic behavior from rotating squares

JN Grima et al.

JOURNAL OF MATERIALS SCIENCE LETTERS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.