☆ 4.6 Article

One-step Surface-to-bulk Modification of NaCrO2 Cathode for Durable Sodium-ion Batteries

BATTERIES & SUPERCAPS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Uniform P2-K0.6CoO2 Microcubes as a High-Energy Cathode Material for Potassium-Ion Batteries

Zhuangzhuang Zhang et al.

Summary: A self-templating strategy was used to prepare homogeneous P2-K0.6CoO2 (KCO) microcubes, which showed improved electrochemical properties for potassium storage due to the reduced interface between the electrolyte and the active material.

NANO LETTERS (2023)

Add to Collection

Article Chemistry, Physical

High-Performing All-Solid-State Sodium-Ion Batteries Enabled by the Presodiation of Hard Carbon

Jin An Sam Oh et al.

Summary: All-solid-state sodium ion batteries (AS(3)iBs) are highly sought after for their safety and stability. Hard carbon (HC), which is low cost and high capacity, is crucial for practical large-scale sodium-ion batteries. Two strategies, additional pyrolysis and presodiation, are explored to improve the initial Coulombic efficiency (ICE) of HC. Results show that presodiated HC exhibits an outstanding ICE (>99%) compared to thermally treated (90%) or pristine HC (83%), and AS(3)iB using presodiated HC and NaCrO2 as the anode and cathode achieves a high ICE of 92% and an initial discharge energy density of 294Whkgcathode-1$294\ {\rm Wh}\ {\rm{kg}}_{{\rm{cathode}}}<^>{ - 1}$.

ADVANCED ENERGY MATERIALS (2023)

Add to Collection

Article Engineering, Environmental

Double sites doping local chemistry Adjustment: A Multiple-Layer oriented P2-Type cathode with Long-life and Water/Air stability for sodium ion batteries

Baixue Ouyang et al.

Summary: P2-type Ni/Mn layered oxides have attracted intensive interest as promising cathode materials due to their high specific capacities and unique 2D Na+ diffusion path. However, the poor stability and irreversible phase transition at high voltage hinder their practical applications. In this study, a novel double site substitution strategy is reported to enhance the stability and sodium ion transport ability of the materials, leading to the preparation of a high-performance P2-K0.05Na0.67Mn0.6Ni0.3Cu0.1O2 cathode material.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Chemistry, Physical

MnFe Prussian blue analogue-derived P3-K0.5Mn0.67Fe0.33O1.95N0.05 cathode material for high-performance potassium-ion batteries

Liping Duan et al.

Summary: Potassium-ion batteries (PIBs) are highly promising for next-generation energy storage due to their high theoretical energy density and abundant natural resources. To overcome the challenges of large volume expansion and sluggish K+ transport, researchers have developed a new synthetic method to create a high-efficiency PIB cathode material called KMFON. The synthesized KMFON exhibits large interlayer spacing, small K+ migration energy barrier, high electronic conductivity, and fast K+ transport kinetics. It demonstrates excellent capacity, rate performance, and cycling performance, highlighting its potential as a cathode material for PIBs.

ENERGY STORAGE MATERIALS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

A Universal Strategy toward Air-Stable and High-Rate O3 Layered Oxide Cathodes for Na-Ion Batteries

Xin-Guang Yuan et al.

Summary: Introducing proper Na vacancies into the lattice of O3-type layered oxides simultaneously improves stability, diffusion pathways, and lowers energy barriers, showing great potential for commercial application. This strategy can be easily applied to various O3 materials before or after treatment, indicating its universality.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Effect of carbon shell over NaCrO2 core by C2H2 decomposition to enhance electrochemical properties for rechargeable Sodium-ion batteries

Abhishek Bhardwaj et al.

Summary: Carbon shell was synthesized over NaCrO2 surface using chemical vapor decomposition to enhance its electrochemical performance for sodium-ion batteries. XRD, FESEM, HRTEM, Raman, and TGA analyses were conducted to study the influence of carbon deposition on NaCrO2, and it was found that the optimized carbon deposition sample showed the highest specific capacity and capacity retention in cycling tests for sodium-ion batteries.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Electrochemistry

Inhibiting electrochemical phase transition of NaCrO2 with long-cycle stability by surface fluorination treatment

Jiahui Wu et al.

Summary: This study focuses on the surface modification of sodium-ion battery cathode material to enhance its surface and interface stability, which leads to improved rate capability and cycle performance.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Methods of improving the initial Coulombic efficiency and rate performance of both anode and cathode materials for sodium-ion batteries

Nkongolo Tshamala Aristote et al.

Summary: This review article summarizes the methods to improve the initial coulombic efficiency (ICE) and rate performance of sodium-ion batteries (SIBs), emphasizing the importance of increasing the transport rate of sodium ions and highlighting the significance of high ICE and rate performance in advancing the commercialization of SIBs.

CHINESE CHEMICAL LETTERS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Air-stability of sodium-based layered-oxide cathode materials

Hu-Rong Yao et al.

Summary: Sodium-ion batteries have the potential to be a viable alternative to lithium-ion batteries for large-scale grid energy storage. However, the poor air-stability of most cathode materials hampers their commercialization. This review provides insights into the current understanding and solutions of air-sensitivity in sodium-based layered-type cathode materials, aiming to promote the feasible application of sodium-ion batteries.

SCIENCE CHINA-CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

Hysteresis-Suppressed Reversible Oxygen-Redox Cathodes for Sodium-Ion Batteries

Natalia Voronina et al.

Summary: Oxygen-redox-based cathode materials have potential as high-capacity and stable electrodes for sodium-ion batteries. By doping with Ni, the layered oxide cathode material Na-0.75[Li0.15Ni0.15Mn0.7]O-2 exhibits improved capacity and cycling stability.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Formation of NaF-Rich Solid Electrolyte Interphase on Na Anode through Additive-Induced Anion-Enriched Structure of Na+ Solvation

Huaping Wang et al.

Summary: By employing an additive strategy, the decomposition of PF6- and the formation of a stable NaF-rich solid electrolyte interphase (SEI) were achieved, resulting in the inhibition of dendrite growth on high-capacity sodium (Na) anodes. The use of electrolytes containing 4-acetylpyridine (4-APD) enabled excellent cycling performance and stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Chemistry, Physical

Facilitating reversible transition metal migration and expediting ion diffusivity via oxygen vacancies for high performance O3-type sodium layered oxide cathodes

Chenhan Lin et al.

Summary: This study proposes a novel design strategy for sodium-ion battery (SIB) cathodes by modifying NaCrO2 cathode with oxygen vacancies. The oxygen vacancy-modified NaCrO2 cathode exhibits higher reversible discharge capacity and excellent cycling performance at high voltages. Moreover, the oxygen vacancies expedite ion diffusivity, resulting in superior rate capability. This finding provides insights for the structural design of O3-type layered oxide cathodes for SIBs.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Chemistry, Physical

Expanded solid-solution behavior and charge-discharge asymmetry in NaxCrO2 Na-ion battery electrodes

Christian L. Jakobsen et al.

Summary: Sodium chromium oxide (NaCrO2) has been studied as a positive electrode material for Na-ion batteries due to its high capacity retention. This paper investigates the structural evolution of NaCrO2 during Na-ion extraction and insertion using operando powder X-ray diffraction. A previously overlooked phase transition is discovered, and its influence on interlayer repulsion and distortion of the [NaO6]-polyhedra is analyzed. The findings are corroborated by analysis of Na-ion diffusion coefficients and reveal substantial charge-discharge asymmetry with a preference for solid-solution and two-phase behavior.

JOURNAL OF POWER SOURCES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Oxidation-Resistant Electrolyte for 4.7 V Sodium Metal Batteries Enabled by Anion/Cation Solvation Engineering

Daxiong Wu et al.

Summary: In this study, an improved strategy for the electrolyte of sodium metal batteries (SMBs) was proposed, resulting in a 4.7 V resistant electrolyte. The additives in the electrolyte enhanced the oxidative stability and protected the electrode-electrolyte interface, leading to a high capacity retention and Coulombic efficiency of the battery.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Corrugated Layered Titanates as High-Voltage Cathode Materials for Potassium-Ion Batteries

Jiaying Liao et al.

Summary: In this study, a series of corrugated layered titanates were developed as cathodes for potassium-ion batteries. By extending the distance between potassium ions and reducing electrostatic repulsion, high working voltage, large capacity, and long lifetime were achieved.

ACS MATERIALS LETTERS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Self-Template Synthesis of NaCrO2 Submicrospheres for Stable Sodium Storage

Shuo Wang et al.

Summary: This study focuses on the design and synthesis of the sodium-ion battery cathode material O3-NaCrO2, successfully producing s-NaCrO2 with high diffusion rate and stable structure. The s-NaCrO2 exhibits outstanding electrochemical performance and cycling stability in both high and low temperature environments, showing feasibility and potential application prospects.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

Ca-substituted P3-type NaxNi1/3Mn1/3Co1/3O2 as a potential high voltage cathode active material for sodium-ion batteries

Masaki Matsui et al.

Summary: The study found that Ca doping can improve the electrochemical performance of layered sodium transition metal oxide, reduce the overpotential during charge and discharge processes, and promote the migration of Na+ ions. Doping also suppresses the irreversible phase transition of sodium ions from the layered structure, significantly improving battery cycling stability and capacity retention.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

O3-Type NaCrO2 as a Superior Cathode Material for Sodium/Potassium-Ion Batteries Ensured by High Structural Reversibility

Jinji Liang et al.

Summary: This study successfully synthesized NaCrO2 using a freeze-drying-assisted sol-gel method, confirming for the first time the coexistence of three phases during charging. This delayed the disappearance of the O3 phase, improved structural reversibility, and resulted in superior cycle stability and outstanding rate capability.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

Degradation by Kinking in Layered Cathode Materials

Yanshuai Li et al.

Summary: Layered cathode materials, such as Na-NMC, commonly used in lithium and sodium ion batteries, can experience mechanical degradation due to electrochemically induced buckling and delamination cracking of intercalation layers. The formation of kinks in the delaminated layers, resulting from severe local bending and dislocations, is observed during in situ mechanical compression experiments. This new degradation mechanism highlights the importance of addressing weak interlayer bonding to mitigate degradation in layered cathode materials.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Optimized Cathode for High-Energy Sodium-Ion Based Dual-Ion Full Battery with Fast Kinetics

Zhiqin Sun et al.

Summary: Developing a new type of cathode material, this study achieved efficient and stable storage of ClO4-, improving the performance of dual-ion batteries. The results indicate that the new P-PANI cathode has a high reversible capacity and demonstrates high energy density performance when paired with a hard carbon anode.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Engineering, Chemical

Pre-sodiation strategy for superior sodium storage batteries

Yongkai Xu et al.

Summary: The study found that pretreating sodium can improve the initial coulombic efficiency and cycle stability of sodium metal batteries, and the NaFeS2@C material exhibits ultrahigh initial coulombic efficiency and remarkable capacity in the battery.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Recent progress of emerging cathode materials for sodium ion batteries

Jun Xiao et al.

Summary: This review summarizes the recent development of cathode materials for SIBs and modified strategies to improve their electrochemical performance. It also presents critical challenges and perspectives for promoting the development of SIBs.

MATERIALS CHEMISTRY FRONTIERS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Sodium transition metal oxides: the preferred cathode choice for future sodium-ion batteries?

Qiannan Liu et al.

Summary: The exploration of next-generation sodium-ion batteries (SIBs) aims to replace lithium-ion batteries and address the depletion of lithium resources. Sodium transition metal oxides are considered promising cathode materials with anionic redox activity. Research on anionic redox in Li-rich transition metal oxides provides insight into high-capacity cathode materials for SIBs, with challenges and strategies discussed. It is expected that this work will provide new perspectives on controlling anionic redox activity and finding novel high-capacity oxide cathode materials for SIBs.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Engineering, Environmental

Na+/vacancies promise excellent electrochemical properties for sodium ion batteries

Tao Chen et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Superlattice-Stabilized Layered Oxide Cathode for Sodium-Ion Batteries

Qi Li et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Enhanced performance on layered O3-Na0.95CrO2 cathode material for emerging sodium-ion batteries

Kouthaman Mathiyalagan et al.

IONICS (2020)

Add to Collection

Review Chemistry, Physical

Anodes and Sodium-Free Cathodes in Sodium Ion Batteries

Xuming Yang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

In Situ-Formed Cr2O3 Coating on NaCrO2 with Improved Sodium Storage Performance

Shuo Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Review Energy & Fuels

Industrialization of Layered Oxide Cathodes for Lithium-Ion and Sodium-Ion Batteries: A Comparative Perspective

Joe Darga et al.

ENERGY TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Recent advances and prospects of layered transition metal oxide cathodes for sodium-ion batteries

Rui-Min Gao et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Heteroatom-doped carbon-based materials for lithium and sodium ion batteries

Yu Yuan et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Ti-doped NaCrO2 as cathode materials for sodium-ion batteries with excellent long cycle life

Wei Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Recent Progress of Layered Transition Metal Oxide Cathodes for Sodium-Ion Batteries

Qiannan Liu et al.

SMALL (2019)

Add to Collection

Article Chemistry, Multidisciplinary

A Crystalline, 2D Polyarylimide Cathode for Ultrastable and Ultrafast Li Storage

Gang Wang et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Oxygen Vacancy Diffusion and Condensation in Lithium-Ion Battery Cathode Materials

Sanghan Lee et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Realizing a High-Performance Na-Storage Cathode by Tailoring Ultrasmall Na2FePO4F Nanoparticles with Facilitated Reaction Kinetics

Fanfan Wang et al.

ADVANCED SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Enhancing the electrochemical performance of an O3-NaCrO2 cathode in sodium-ion batteries by cation substitution

Yuesheng Wang et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Layer-Based Heterostructured Cathodes for Lithium-Ion and Sodium-Ion Batteries

Ya-Ping Deng et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Electrochemistry

Stabilizing NaCrO2 by Sodium Site Doping with Calcium

Lituo Zheng et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

High Energy Density Sodium-Ion Battery with Industrially Feasible and Air-Stable O3-Type Layered Oxide Cathode

Jianqiu Deng et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Electrochemical performances of lithium and sodium ion batteries based on carbon materials

Ji-Hyun Kim et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2018)

Add to Collection

Review Chemistry, Multidisciplinary

From Lithium-Ion to Sodium-Ion Batteries: Advantages, Challenges, and Surprises

Prasant Kumar Nayak et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Sodium-ion batteries: present and future

Jang-Yeon Hwang et al.

CHEMICAL SOCIETY REVIEWS (2017)

Add to Collection

Article Chemistry, Physical

Layered-to-Rock-Salt Transformation in Desodiated NaxCrO2 (x 0.4)

Shou-Hang Bo et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Improved cycling performance of P2-type layered sodium cobalt oxide by calcium substitution

Masaki Matsui et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Article Chemistry, Physical

Ca-doped NaxCoO2 for improved cyclability in sodium ion batteries

Su Cheol Han et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Review Chemistry, Physical

Update on anode materials for Na-ion batteries

Hongyan Kang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Chemistry, Physical

Phase transition behavior of NaCrO2 during sodium extraction studied by synchrotron-based X-ray diffraction and absorption spectroscopy

Yong-Ning Zhou et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

Add to Collection

Article Electrochemistry

Cycle performance improvement of NaCrO2 cathode by carbon coating for sodium ion batteries

Jing-Jing Ding et al.

ELECTROCHEMISTRY COMMUNICATIONS (2012)

Add to Collection

Article Electrochemistry

Electrochemical intercalation activity of layered NaCrO2 vs. LiCrO2

Shinichi Komaba et al.

ELECTROCHEMISTRY COMMUNICATIONS (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.