☆ 4.7 Article

A novel two-dimensional non-contact platform based on near-field acoustic levitation

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2024)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Nonlinear coupling between radial and axial vibrations during single-axis acoustic levitation in mid-air

Naohiro Sugita et al.

Summary: In this study, a nonlinear dynamic model for single-axis standing-wave acoustic levitation is investigated both theoretically and experimentally. The aim is to understand the nonlinear coupling between radial and axial vibrations and its impact on levitation stability. A power series expansion of the acoustic radiation force acting on a levitated spherical particle is employed, allowing for the specific consideration of the nonlinear coupling term in the equation of motion. Experimental measurements are compared with the derived asymptotic solutions to validate the coupling effect. The results show that the natural radial frequency decreases due to axial vibration, leading to destabilization of the radial equilibrium state.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

Add to Collection

Article Engineering, Mechanical

Squeeze film air bearing for controlling the shaft positions based on a radial basis function neural network

Pengfei Zhang et al.

Summary: This study proposes a squeeze film air bearing (SFAB) with flexure pivot-tilting pads, and uses an intelligence algorithm to predict the desired pad amplitudes for controlling the shaft positions. Experimental results verify that the SFAB can precisely control the shaft positions.

TRIBOLOGY INTERNATIONAL (2023)

Add to Collection

Article Physics, Applied

Theoretical investigation of the levitation force generated by underwater squeeze action

Yuanyuan Liu et al.

Summary: This study proposes an analytical model for underwater near-field acoustic levitation (NFAL) and investigates its levitation performance. The study deduces the Reynolds equations to describe the film pressure distribution and determine the compressibility of the fluid. The comparison of calculated squeeze film forces with experimental observations confirms the fluid's compressibility. The numerical results show that increasing the water temperature decreases the mean squeeze film force above 20 degrees C, while increasing the vibration amplitude increases the mean squeeze film force.

JAPANESE JOURNAL OF APPLIED PHYSICS (2023)

Add to Collection

Article Acoustics

On the coupled dynamics of near-field acoustic levitation bearing

Yaoke Wang

JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2023)

Add to Collection

Article Engineering, Electrical & Electronic

A novel non-contact carrying and transportation method based on near-field acoustic levitation and negative pressure adsorption

Yuanbo Li et al.

Summary: A novel non-contact carrying and transportation technology is proposed based on near-field acoustic levitation and negative pressure adsorption effect. This technology enables the levitation of disk-shaped objects at a height of tens or even hundreds of micrometers and generates restoring force to move the objects towards the center of the acoustic emission plate during transportation. The study demonstrates improved speed and efficiency in the non-contact transportation system.

SENSORS AND ACTUATORS A-PHYSICAL (2023)

Add to Collection

Article Mechanics

Viscoacoustic squeeze-film force on a rigid disk undergoing small axial oscillations

S. Ramanarayanan et al.

Summary: This paper investigates the air flow induced by a rigid circular disk or piston vibrating harmonically near a parallel surface. It proposes a viscoacoustic analysis method to explore different flow regions and corresponding flow parameters. The analysis provides a unified theory for axisymmetric squeeze films and offers a simplified parametric description of the time-averaged repulsion/attraction force, which may have value in applications such as non-contact fluid bearings and robot locomotion.

JOURNAL OF FLUID MECHANICS (2022)

Add to Collection

Article Acoustics

Rapid rise of planar object by near-field acoustic levitation on recessed acoustic radiation surface

Kohei Aono et al.

Summary: NFAL can create levitation for a planar object on the vibrating surface, while a vibrating surface with a recess can lead to jumping behavior accompanied by a snapping sound. Jumping occurs when the minimum value of the acoustic radiation force exceeds the weight of the object, and the snapping sound is generated by focused sound pressure due to acoustic resonance in the recessed space.

ULTRASONICS (2022)

Add to Collection

Article Engineering, Mechanical

Modeling and stability characteristics of bump-type gas foil bearing rotor systems considering stick-slip friction

Runeng Zhou et al.

Summary: In this study, a comprehensive model was developed to investigate the effect of friction on the stability and frictional dissipation mechanism of gas foil bearing (GFB) rotor systems. The results revealed that the friction coefficient and disturbance magnitude affect the stick-slip states, which directly govern the dissipation capacity of the foil structure.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Physics, Applied

Stiffness modeling for near field acoustic levitation bearings

Yaoke Wang et al.

Summary: In this study, the dynamic characteristics of near field levitation bearings were investigated by defining and deriving two types of system stiffness through theoretical analysis. The results indicate that the proposed stiffness model can effectively predict levitation force and height, and eliminate structural resonance effects. Additionally, unique dynamic behaviors were investigated and predicted based on the stiffness model.

APPLIED PHYSICS LETTERS (2021)

Add to Collection

Article Acoustics

Design of ultrasonic standing wave levitation support for three-dimensional printed filaments

Huaying Wu et al.

Summary: This paper proposes a method for support-free FDM printing using an ultrasonic phased array device to levitate slender objects in the air, reducing the deformation of single filaments due to gravity on bridge structures. The experiments demonstrate the feasibility of the ultrasonic phased array system playing an important role in the field of support-free FDM printing.

JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2021)

Add to Collection

Article Acoustics

Theoretical analysis of a contactless transportation system for cylindrical objects based on ultrasonic levitation

Yuanyuan Liu et al.

Summary: This paper introduces a contactless transportation system for cylindrical objects based on grooved radiators. The system utilizes asymmetrical pressure distribution generated by grooves on the concave surface of the radiator to drive the levitator horizontally. Parameter studies show that groove depth, arc length, width, radiator vibration amplitude, and levitator weight are key factors influencing thrusting force.

JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2021)

Add to Collection

Article Acoustics

Levitating Force and Stability Analysis of Near-field Acoustic Levitation using Flexural Vibrations of the Plate

Saurabh Yadav et al.

Summary: In this study, the finite element approach was used to simulate the near-field acoustic levitation phenomenon and analyze the resonance frequency and total radiation force of the driver. The results were validated with experimental studies and the translational and rotational stability of the levitating object was also studied.

ACOUSTICAL PHYSICS (2021)

Add to Collection

Article Physics, Applied

Contactless pick-and-place of millimetric objects using inverted near-field acoustic levitation

Marco A. B. Andrade et al.

APPLIED PHYSICS LETTERS (2020)

Add to Collection

Article Engineering, Mechanical

Running Performance of a Squeeze Film Air Bearing with Flexure Pivot Tilting Pad

Minghui Shi et al.

TRIBOLOGY TRANSACTIONS (2020)

Add to Collection

Article Chemistry, Analytical

Chladni Figures in Modal Analysis of a Double-Panel Structure

Jaroslaw Rzepecki et al.

SENSORS (2020)

Add to Collection

Article Acoustics

Stabilizing near-field acoustic levitation: Investigation of non-linear restoring force generated by asymmetric gas squeeze film

Yuanyuan Liu et al.

JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2020)

Add to Collection

Article Engineering, Mechanical

Investigation on the rotordynamic performance of hybrid bump-metal mesh foil bearings rotor system

Wanhui Liu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Add to Collection

Article Engineering, Mechanical

Nonlinear responses and bifurcations of a rotor-bearing system supported by squeeze-film damper with retainer spring subjected to base excitations

Xi Chen et al.

NONLINEAR DYNAMICS (2020)

Add to Collection

Article Physics, Applied

Increase of holding force in near-field acoustic levitation of tabular object inserted between opposing vibration sources

Kohei Aono et al.

JAPANESE JOURNAL OF APPLIED PHYSICS (2019)

Add to Collection

Article Automation & Control Systems

A Contactless Stage Based on Near-Field Acoustic Levitation for Object Handling and Positioning-Concept, Design, Modeling, and Experiments

Ran Gabai et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2019)

Add to Collection

Review Engineering, Manufacturing

Near-field acoustic levitation and applications to bearings: a critical review

Minghui Shi et al.

INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2019)

Add to Collection

Article Engineering, Mechanical

Integrated Numerical Analysis on the Performance of a Hybrid Gas-Lubricated Bearing Utilizing Near-Field Acoustic Levitation

Kai Feng et al.

TRIBOLOGY TRANSACTIONS (2018)

Add to Collection

Article Engineering, Mechanical

Numerical and experimental study on the influence of material characteristics on the levitation performance of squeeze-film air bearing

Minghui Shi et al.

TRIBOLOGY INTERNATIONAL (2018)

Add to Collection

Article Engineering, Mechanical

Theoretical investigation and prototype design for non-parallel squeeze film movement platform driven by standing waves

Bin Wei et al.

TRIBOLOGY INTERNATIONAL (2018)

Add to Collection

Article Engineering, Mechanical

Nonlinear Analysis of Stability and Unbalanced Response on Spherical Spiral-Grooved Gas Bearings

Wenjun Li et al.

TRIBOLOGY TRANSACTIONS (2018)

Add to Collection

Article Engineering, Mechanical

Effect of Surface Grooves on the Characteristics of Noncontact Transportation Using Near-Field Acoustic Levitation

Wenjun Li et al.

TRIBOLOGY TRANSACTIONS (2018)

Add to Collection

Article Engineering, Mechanical

Thermohydrodynamic Analysis and Thermal Management of Spherical Spiral Groove Gas Bearings

Kai Feng et al.

TRIBOLOGY TRANSACTIONS (2017)

Add to Collection

Article Engineering, Mechanical

Modeling and closed loop control of near-field acoustically levitated objects

Dotan Ilssar et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

Add to Collection

Article Engineering, Mechanical

Modelling and experimental study on the influence of surface grooves on near-field acoustic levitation

Wenjun Li et al.

TRIBOLOGY INTERNATIONAL (2017)

Add to Collection

Article Engineering, Chemical

Extended Duration Running and Impulse Loading Characteristics of an Acoustic Bearing with Enhanced Geometry

T. A. Stolarski et al.

TRIBOLOGY LETTERS (2017)

Add to Collection

Article Physics, Applied

Acoustic levitation of a large solid sphere

Marco A. B. Andrade et al.

APPLIED PHYSICS LETTERS (2016)

Add to Collection

Article Physics, Applied

Self-running and self-floating two-dimensional actuator using near-field acoustic levitation

Keyu Chen et al.

APPLIED PHYSICS LETTERS (2016)

Add to Collection

Article Engineering, Mechanical

Acoustic journal bearing - Performance under various load and speed conditions

T. A. Stolarski et al.

TRIBOLOGY INTERNATIONAL (2016)

Add to Collection

Article Engineering, Mechanical

NFAL Prototype Design and Feasibility Analysis for Self-Levitated Conveying

Xiaoni Chang et al.

TRIBOLOGY TRANSACTIONS (2016)

Add to Collection

Article Acoustics

Two-Dimensional Noncontact Transportation of Small Objects in Air Using Flexural Vibration of a Plate

Ryota Kashima et al.

IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2015)

Add to Collection

Article Acoustics

Numerical analysis of the transportation characteristics of a self-running sliding stage based on near-field acoustic levitation

Kai Feng et al.

JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2015)

Add to Collection

Article Robotics

A survey of non-prehensile pneumatic manipulation surfaces: principles, models and control

Guillaume J. Laurent et al.

INTELLIGENT SERVICE ROBOTICS (2015)

Add to Collection

Article Engineering, Mechanical

Discharge Coefficients in Aerostatic Bearings With Inherent Orifice-Type Restrictors

S. H. Chang et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2015)

Add to Collection

Article Engineering, Mechanical

Running performance of an aerodynamic journal bearing with squeeze film effect

Tomohiro Shou et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)

Add to Collection

Article Engineering, Mechanical

An ultrasonic levitation journal bearing able to control spindle center position

Su Zhao et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2013)

Add to Collection

Article Acoustics

Development and study of novel non-contact ultrasonic motor based on principle of structural asymmetry

Dmitry A. Stepanenko et al.

ULTRASONICS (2012)

Add to Collection

Article Mechanics

A standing wave acoustic levitation system for large planar objects

Su Zhao et al.

ARCHIVE OF APPLIED MECHANICS (2011)

Add to Collection

Article Physics, Applied

Acoustic wave levitation: Handling of components

Vincent Vandaele et al.

JOURNAL OF APPLIED PHYSICS (2011)

Add to Collection

Article Instruments & Instrumentation

Analysis of the particle stability in a new designed ultrasonic levitation device

Sebastian Baer et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2011)

Add to Collection

Article Engineering, Electrical & Electronic

Modeling characterization and optimization design for PZT transducer used in Near Field Acoustic Levitation

Jin Li et al.

SENSORS AND ACTUATORS A-PHYSICAL (2011)

Add to Collection

Article Engineering, Mechanical

Study of design parameters for squeeze film air journal bearing - excitation frequency and amplitude

C. Wang et al.

MECHANICAL SCIENCES (2011)

Add to Collection

Article Physics, Applied

Influence of gas inertia and edge effect on squeeze film in near field acoustic levitation

Jin Li et al.

APPLIED PHYSICS LETTERS (2010)

Add to Collection

Article Acoustics

Modeling and Experimental Study on Near-Field Acoustic Levitation by Flexural Mode

Pinkuan Liu et al.

IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2009)

Add to Collection

Article Engineering, Mechanical

Experimental and Analytical Investigation of a Dynamic Gas Squeeze Film Bearing Including Asperity Contact Effects

Manoj Mahajan et al.

TRIBOLOGY TRANSACTIONS (2008)

Add to Collection

Article Engineering, Electrical & Electronic

A non-contact linear bearing and actuator via ultrasonic levitation

Takeshi Ide et al.

SENSORS AND ACTUATORS A-PHYSICAL (2007)

Add to Collection

Article Engineering, Mechanical

Float characteristics of a squeeze-film air bearing for a linear motion guide using ultrasonic vibration

Shigeka Yoshimoto et al.

TRIBOLOGY INTERNATIONAL (2007)

Add to Collection

Article Engineering, Mechanical

Evaluation of a wafer transportation speed for propulsion nozzle array on air levitation system

In-Ho Moon et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2006)

Add to Collection

Article Engineering, Mechanical

Load-carrying capacity generation in squeeze film action

T. A. Stolarski et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2006)

Add to Collection

Article Physics, Applied

A low-profile design for the noncontact ultrasonically levitated stage

T Ide et al.

JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS (2005)

Add to Collection

Article Acoustics

Estimating the ratio between travelling and standing vibration waves under non-stationary conditions

I Bucher

JOURNAL OF SOUND AND VIBRATION (2004)

Add to Collection

Letter Acoustics

New type of linear ultrasonic actuator based on a plate-shaped vibrator with triangular grooves

JH Hu et al.

IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2004)

Add to Collection

Article Acoustics

Noncontacting lateral transportation using gas squeeze film generated by flexural traveling waves - Numerical analysis

A Minikes et al.

JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2003)

Add to Collection

Article Physics, Applied

A multi-transducer near field acoustic levitation system for noncontact transportation of large-sized planar objects

T Amano et al.

JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS (2000)

Add to Collection

Article Acoustics

Non-contact transportation using near-field acoustic levitation

S Ueha et al.

ULTRASONICS (2000)

Add to Collection

Article Acoustics

Holding characteristics of planar objects suspended by near-field acoustic levitation

E Matsuo et al.

ULTRASONICS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.