Related references
Note: Only part of the references are listed.In situ transformations during SLM of an ultra-strong TiC reinforced Ti composite
Sasan Dadbakhsh et al.
Scientific Reports (2020)
Effect of TiB2 addition on the microstructure and wear resistance of Ti-6Al-4V alloy fabricated through direct metal laser sintering (DMLS)
Aniruddha S. Patil et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Microstructural evolution and mechanical properties of in-situ as-cast beta titanium matrix composites
Vitor V. Rielli et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Selective Laser Melting process optimization of Ti-Mo-TiC metal matrix composites
Bey Vrancken et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)
Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: A state of the art review
W. H. Yu et al.
PROGRESS IN MATERIALS SCIENCE (2019)
In-situ Ti-6Al-4V/TiC composites synthesized by reactive spark plasma sintering: processing, microstructure, and dry sliding wear behaviour
Mingwen Bai et al.
WEAR (2019)
Effects of boron addition on microstructures and mechanical properties of Ti-6Al-4V manufactured by direct laser deposition
K. Zhang et al.
MATERIALS & DESIGN (2019)
Selective Laser Melting to Manufacture In Situ Metal Matrix Composites: A Review
Sasan Dadbakhsh et al.
ADVANCED ENGINEERING MATERIALS (2019)
Melt pool geometry and microstructure of Ti6Al4V with B additions processed by selective laser melting additive manufacturing
Yining He et al.
MATERIALS & DESIGN (2019)
Microstructure and mechanical properties of in situ formed TiC-reinforced Ti-6Al-4V matrix composites
Wen-Hou Wei et al.
MATERIALS SCIENCE AND TECHNOLOGY (2018)
Laser deposition-additive manufacturing of TiB-Ti composites with novel three-dimensional quasi-continuous network microstructure: Effects on strengthening and toughening
Yingbin Hu et al.
COMPOSITES PART B-ENGINEERING (2018)
Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: A review
H. Shipley et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)
Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: A review
Hooyar Attar et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)
Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V
Haider Ali et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of trace lanthanum hexaboride and boron additions on microstructure, tensile properties and anisotropy of Ti-6Al-4V produced by additive manufacturing
M. J. Bermingham et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Strengthening of stainless steel by titanium carbide addition and grain refinement during selective laser melting
Bandar AlMangour et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of TiC particle size on the microstructure and tensile properties of TiCp/Ti6Al4V composites fabricated by laser melting deposition
Jiandong Wang et al.
OPTICS AND LASER TECHNOLOGY (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
In-Situ Nanoparticles: A New Strengthening Method for Metallic Structural Material
Shiwei Pan et al.
APPLIED SCIENCES-BASEL (2018)
Melt pool temperature and cooling rates in laser powder bed fusion
Paul A. Hooper
ADDITIVE MANUFACTURING (2018)
Fatigue life of additively manufactured Ti-6Al-4V in the very high cycle fatigue regime
J. Guenther et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
In-situ formation of novel TiC-particle-reinforced 316L stainless steel bulk-form composites by selective laser melting
Bandar AlMangour et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Rapid in-situ reaction synthesis of novel TiC and carbon nanotubes reinforced titanium matrix composites
Xianglong Sun et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)
Strengthening effects of TiC particles and microstructure refinement in in situ TiC-reinforced Ti matrix composites
Fengcang Ma et al.
MATERIALS CHARACTERIZATION (2017)
In-situ residual stress reduction, martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of Selective Laser Melted Ti6Al4V
Haider Ali et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
The formation mechanism of TiC reinforcement and improved tensile strength in additive manufactured Ti matrix nanocomposite
Beibei He et al.
VACUUM (2017)
The influences of melting degree of TiC reinforcements on microstructure and mechanical properties of laser direct deposited Ti6Al4V-TiC composites
Shunyu Liu et al.
MATERIALS & DESIGN (2017)
Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review
Lai-Chang Zhang et al.
ADVANCED ENGINEERING MATERIALS (2016)
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
Saad A. Khairallah et al.
ACTA MATERIALIA (2016)
The metallurgy and processing science of metal additive manufacturing
W. J. Sames et al.
INTERNATIONAL MATERIALS REVIEWS (2016)
Fundamental Study on Laser Interactions With Nanoparticles-Reinforced Metals-Part II: Effect of Nanoparticles on Surface Tension, Viscosity, and Laser Melting
Chao Ma et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2016)
Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting
Galina Kasperovich et al.
MATERIALS & DESIGN (2016)
On the role of melt flow into the surface structure and porosity development during selective laser melting
Chunlei Qiu et al.
ACTA MATERIALIA (2015)
Particulate migration behavior and its mechanism during selective laser melting of TiC reinforced Al matrix nanocomposites
Pengpeng Yuan et al.
MATERIALS & DESIGN (2015)
Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting
J. A. Cherry et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process
V. Manvatkar et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
Selective laser melting of in situ titanium-titanium boride composites: Processing, microstructure and mechanical properties
Hooyar Attar et al.
ACTA MATERIALIA (2014)
Comparative study of microstructures and mechanical properties of in situ Ti-TiB composites produced by selective laser melting, powder metallurgy, and casting technologies
H. Attar et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti-6A1-4V
M. Simonelli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Selective Laser Melting Additive Manufacturing of Ti-Based Nanocomposites: The Role of Nanopowder
Dongdong Gu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
On the Texture Formation of Selective Laser Melted Ti-6Al-4V
Marco Simonelli et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
On the superposition of strengthening mechanisms in dispersion strengthened alloys and metal-matrix nanocomposites: Considerations of stress and energy
J. B. Ferguson et al.
METALS AND MATERIALS INTERNATIONAL (2014)
Laser additive manufacturing of metallic components: materials, processes and mechanisms
D. D. Gu et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
Fiji: an open-source platform for biological-image analysis
Johannes Schindelin et al.
NATURE METHODS (2012)
In-situ Formation of Titanium Boride and Titanium Carbide by Selective Laser Melting
Timo Kuehnle et al.
LASER ASSISTED NET SHAPE ENGINEERING 7 (LANE 2012) (2012)
Nanocrystalline TiC reinforced Ti matrix bulk-form nanocomposites by Selective Laser Melting (SLM): Densification, growth mechanism and wear behavior
Dongdong Gu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
A 'missing' family of classical orthogonal polynomials
Luc Vinet et al.
JOURNAL OF PHYSICS A-MATHEMATICAL AND THEORETICAL (2011)
A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti-6Al-4V powders
M. Naveed Ahsan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting
T. Vilaro et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Selective Laser Melting of in-situ TiC/Ti5Si3 composites with novel reinforcement architecture and elevated performance
Dongdong Gu et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Friction and wear behavior of titanium matrix (TiB plus TiC) composites
I. Y. Kim et al.
WEAR (2011)
In-situ TiC particle reinforced Ti-Al matrix composites: Powder preparation by mechanical alloying and Selective Laser Melting behavior
Dongdong Gu et al.
APPLIED SURFACE SCIENCE (2009)
Growth morphologies and mechanisms of TiC grains during Selective Laser Melting of Ti-Al-C composite powder
Dongdong Gu et al.
MATERIALS LETTERS (2009)
Microstructural and mechanical characteristics of in situ metal matrix composites
SC Tjong et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2000)
Share Paper
