Related references
Note: Only part of the references are listed.Experimental characterization and modelling of adhesive bonded joints under static and non-monotonic fracture loading in the mode II regime
Marco Lamberti et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2023)
Cyclic behaviour modelling of GFRP adhesive connections by an imperfect soft interface model with damage evolution
M. Lamberti et al.
COMPOSITE STRUCTURES (2022)
Nonlinear Analytical Procedure for Predicting Debonding of Laminate from Substrate Subjected to Monotonic or Cyclic Load
Marco Lamberti et al.
MATERIALS (2022)
Stress analysis of double-lap bi-material joints bonded with thick adhesive
Mohamed Nasr Saleh et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)
A nonlinear semi-analytical model for predicting debonding of FRP laminates from RC beams subjected to uniform or concentrated load
A. G. Razaqpur et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Modelling of a GFRP adhesive connection by an imperfect soft interface model with initial damage
A. Maurel-Pantel et al.
COMPOSITE STRUCTURES (2020)
Durability of adhesively bonded joints between pultruded GFRP adherends under hygrothermal and natural ageing
J. M. Sousa et al.
COMPOSITES PART B-ENGINEERING (2019)
Influence of elevated temperatures on epoxy adhesive used in CFRP strengthening systems for civil engineering applications
J. P. Firmo et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)
Effect of hygrothermal aging on the quasi-static behaviour of CFRP joints varying the overlap length
J. J. M. Machado et al.
COMPOSITE STRUCTURES (2019)
Durability of steel-CFRP structural adhesive joints with polyurethane adhesives
Pedro Galvez et al.
COMPOSITES PART B-ENGINEERING (2019)
Behaviour of environmentally degraded epoxy adhesives as a function of temperature
G. Viana et al.
JOURNAL OF ADHESION (2017)
Effect of Humidity on The Fatigue Behaviour of Adhesively Bonded Aluminium Joints
M. Costa et al.
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES (2017)
Toughening of Epoxy Adhesives by Combined Interaction of Carbon Nanotubes and Silsesquioxanes
Giuseppina Barra et al.
MATERIALS (2017)
Durability of bonded FRP-to-steel joints: Effects of moisture, de-icing salt solution, temperature and FRP type
Mohsen Heshmati et al.
COMPOSITES PART B-ENGINEERING (2017)
Determination of Traction Separation Law for Interfacial Failure in Adhesive Joints at Different Loading Rates
Chaitanya K. Desai et al.
JOURNAL OF ADHESION (2016)
Influence of web/flange reinforcement on the GFRP bonded beams mechanical response: A comparison with experimental results and a numerical prediction
Marco Lamberti et al.
COMPOSITE STRUCTURES (2016)
Effect of temperature and strain rate on single lap joints with dissimilar lightweight adherends bonded with an acrylic adhesive
R. Avendano et al.
COMPOSITE STRUCTURES (2016)
Effects of moisture on the long-term performance of adhesively bonded FRP/steel joints used in bridges
Mohsen Heshmati et al.
COMPOSITES PART B-ENGINEERING (2016)
Testing of new adhesive and CFRP laminate for steel-CFRP joints under sustained loading and temperature cycles
Ankit Agarwal et al.
COMPOSITES PART B-ENGINEERING (2016)
An investigation of hygrothermal effects on adhesive materials and double lap shear joints of CFRP composite laminates
Shufeng Liu et al.
COMPOSITES PART B-ENGINEERING (2016)
Preliminary study on bio-based polyurethane adhesive/aluminum laminated composites for automotive applications
Norazwani Muhammad Zain et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2016)
Pre-applicable structural adhesives for timber engineering: Glued-in G-FRP rods
Michael Adam et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2016)
Mechanical behavior of polyurethane adhesive joints used in laminated materials for marine structures
Cristina Alia et al.
OCEAN ENGINEERING (2016)
Nesting effect on the mode II fracture toughness of woven laminates
Mireia Olave et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Glass transition evaluation of commercially available epoxy resins used for civil engineering applications
Julien Michels et al.
COMPOSITES PART B-ENGINEERING (2015)
Experimental and numerical study on the effect of humidity-temperature cycling on structural multi-material adhesive joints
Jakub Korta et al.
COMPOSITES PART B-ENGINEERING (2015)
Environmental durability of adhesively bonded FRP/steel joints in civil engineering applications: State of the art
Mohsen Heshmati et al.
COMPOSITES PART B-ENGINEERING (2015)
Accelerated ageing of polylactide in aqueous environments: Comparative study between distilled water and seawater
Morgan Deroine et al.
POLYMER DEGRADATION AND STABILITY (2014)
Instrumented end notched flexure - Crack propagation and process zone monitoring Part II: Data reduction and experimental
M. K. Budzik et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)
Analysis of adhesive joints used to bond FRP laminates to steel members - A numerical and experimental study
Reza Haghani
CONSTRUCTION AND BUILDING MATERIALS (2010)
The Effect of Surface Treatment on the Behavior of Toughened Acrylic Adhesive/GRP(epoxy) Composite Joints
R. Chamochin et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2010)
Diffusion behavior of water in polyamide 6 organoclay nanocomposites
N. Abacha et al.
EXPRESS POLYMER LETTERS (2009)
Buckling Behaviour of Carbon-Epoxy Adhesively-Bonded Scarf Repairs
R. D. S. G. Campilho et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2009)
Equivalent crack based analyses of ENF and ELS tests
M. F. S. F. de Moura et al.
ENGINEERING FRACTURE MECHANICS (2008)
Structural engineering of polyurethane coatings for high performance applications
D. K. Chattopadhyay et al.
PROGRESS IN POLYMER SCIENCE (2007)