☆ 4.7 Article

Efficient extraction of platinum(IV) using tertiary-amine groups functionalized thiacalix[4]arene as extractant

MINERALS ENGINEERING (2024)

Related references

Note: Only part of the references are listed.

Review Materials Science, Multidisciplinary

Recovery of platinum from spent automotive catalyst based on hydrometallurgy

Tao Ge et al.

Summary: Platinum (Pt) is a critical raw material for automotive catalytic converters due to its high-temperature stability, corrosion resistance, and catalytic activity. However, its limited primary resources and uneven distribution make it difficult to meet the growing demand. Spent automotive catalyst (SAC) is currently the most important secondary resource of platinum, with a higher platinum content than primary sources. This paper provides an overview of the technologies for platinum recovery from SAC, with a focus on enrichment and refining processes based on hydrometallurgical techniques. Future directions for research and development in platinum recovery from SAC are also proposed.

RARE METALS (2023)

Add to Collection

Review Engineering, Chemical

Platinum group metals recycling from spent automotive catalysts: metallurgical extraction and recovery technologies

Jinsong Xia et al.

Summary: Platinum group metals (PGMs), essential in various catalytic industries, are found abundantly in Spent Automotive Catalysts (SAC) and have higher grades than natural ores. However, the low recycling rate of SAC in many countries leads to the loss of valuable resources. This paper reviews the technologies for recycling PGMs from SAC, including metallurgical extraction and solution purification techniques, discussing the mechanisms, discoveries, challenges, and providing suggestions for future research and industrial applications. Overall, it presents a critical perspective on the current advances in PGMs recycling from SAC.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

Add to Collection

Article Engineering, Chemical

Separation of platinum group metals using deep eutectic solvents based on quaternary ammonium salts

Olga Mokhodoeva et al.

Summary: A new technique for selective separation and enrichment of platinum group metals without the use of chelating agents is presented. The process involves extracting precious metals into a hydrophobic deep eutectic solvent and re-extracting them with ammonium hydroxide and nitric acid solutions. The technique has a high extraction efficiency for platinum, palladium, ruthenium, iridium, and rhodium.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Independent gradient model based on Hirshfeld partition: A new method for visual study of interactions in chemical systems

Tian Lu et al.

Summary: The powerful independent gradient model (IGM) method has limitations in graphically studying weak interactions. In this article, an improved version of IGM, called IGM based on Hirshfeld partition (IGMH), is proposed to overcome the shortcomings. The rigorous physical background of IGMH is demonstrated through various application examples, showcasing its important value in intuitively understanding interactions in chemical systems.

JOURNAL OF COMPUTATIONAL CHEMISTRY (2022)

Add to Collection

Article Engineering, Chemical

Urea-Introduced Ionic Liquid for the Effective Extraction of Pt(IV) and Pd(II) Ions

Yuki Ueda et al.

Summary: By changing the pH region, the urea-introduced imidazolium-based ionic liquid can selectively extract Pt(IV) and Pd(II) ions. The extraction equilibrium time for Pd(II) is much shorter in the ionic liquid extraction system compared to the conventional organic extraction system. The extraction mechanism involves anion-exchange and ligand-exchange reactions.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2022)

Add to Collection

Article Engineering, Chemical

Hydrometallurgical recovery of platinum-group metals from spent auto-catalysts-Focus on leaching and solvent extraction

Ana Paula Paiva et al.

Summary: To ensure the supply of raw materials for important products in strategic sectors, the recovery of critical metals from secondary sources becomes increasingly urgent. This article investigates the operations of leaching and solvent extraction in order to optimize conditions and propose new arrangements to improve them.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Organic

A highly selective fluorescence probe for Co2+ or Cu2+ detection based on a new tetraquinoline-substituted calix[4]arene derivative

Serkan Sayin

Summary: A new calixarene-based fluorescent chemosensor was synthesized and showed remarkable affinity and high selectivity for Cu2+ and Co2+ ions.

TETRAHEDRON (2022)

Add to Collection

Review Chemistry, Inorganic & Nuclear

Calix[n]arenes and its derivatives as organocatalysts

Garima Sachdeva et al.

Summary: Organocatalysts, small organic compounds that replicate the actions of enzymes and inorganic catalysts, have the advantages of being inexpensive, less toxic, and widely available. Calix[n]arenes, vase-shaped supramolecules with a hollow cavity, have been extensively used in host-guest chemistry. The cavities of calix[n]arene scaffolds, their well-defined conformation, and non-covalent interactions play an important role in organocatalysis. This review covers the developments and future perspectives in the use of calixarene in organocatalysis, highlighting substrate scopes and analyzing mechanistic aspects when required.

COORDINATION CHEMISTRY REVIEWS (2022)

Add to Collection

Article Engineering, Chemical

Effective extraction of Pt(IV) as [PtCl6]2- from hydrochloric acid using a simple urea extractant

Yuki Ueda et al.

Summary: A new extractant, 1-butyl-3-(2-ethylhexyl)urea (L), was studied for its efficient extraction of [PtCl6](2-) from HCl solutions, showing high selectivity and revealing the mechanism of extraction and changes in water content after extraction.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Review Chemistry, Physical

Precious metal recovery

Yao Chen et al.

Summary: As non-renewable resources, the demand for precious metals (PMs) is increasing, leading to a growing focus on the recovery of secondary resources. However, the chemical stability of PMs makes recovery conditions harsher and poses serious safety concerns. This article discusses research progress on PM recovery strategies, challenges, and future prospects.

JOULE (2021)

Add to Collection

Review Engineering, Environmental

Separation and purification of platinum group metals from aqueous solution: Recent developments and industrial applications

Huandong Zheng et al.

Summary: The study reviewed various improvements and new technologies for the separation and purification of PGMs, emphasizing the importance of reducing resource depletion and environmental pollution. The separation mechanism and optimized process parameters are summarized, along with highlighting the advantages, challenges, and perspectives in commercial applications. The paper aims to present current research for scholars, and identify a safe and effective method for PGMs separation.

RESOURCES CONSERVATION AND RECYCLING (2021)

Add to Collection

Review Engineering, Chemical

Separation of platinum, palladium and rhodium from aqueous solutions using ion exchange resin: A review

Jae-chun Lee et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Extraction of Pd(ii) and Pt(ii) from aqueous hydrochloric acid with 1,3-diaminocalix[4]arene: switching of the extraction selectivity by using different extraction modes

Naoya Morohashi et al.

RSC ADVANCES (2020)

Add to Collection

Article Engineering, Chemical

Efficient extraction of precious metal ions by a membrane emulsification circulation extractor

Kebao He et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Article Engineering, Chemical

Separation of Pt(IV), Pd(II), Ru(III) and Rh(III) from model chloride solutions by liquid-liquid extraction with phosphonium ionic liquids

Martyna Rzelewska-Piekut et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Extraction and complexation of lanthanide ions by dihomooxacalix[4]arene and calix[4]arene tetraketone derivatives: An experimental and molecular dynamics investigation

Joel D. Fonseca et al.

COMPTES RENDUS CHIMIE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Calix[4] arene-Based n-Dialkylamino Extractants for Selective Platinum Group Metal Separation from Automotive Catalysts

Manabu Yamada et al.

CHEMISTRYSELECT (2017)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Extraction and separation of trivalent rare earth metal ions from nitrate medium by p-phosphonic acid calix[4]arene

Youcai Lu et al.

HYDROMETALLURGY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Comparative study on the methods for predicting the reactive site of nucleophilic reaction

Jingsi Cao et al.

SCIENCE CHINA-CHEMISTRY (2015)

Add to Collection

Article Geosciences, Multidisciplinary

Platinum in Earth surface environments

F. Reith et al.

EARTH-SCIENCE REVIEWS (2014)

Add to Collection

Review Metallurgy & Metallurgical Engineering

Solvent extraction of platinum using amine based extractants in different solutions: A review

Manis Kumar Jha et al.

HYDROMETALLURGY (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis and characterisation of p-diethylaminomethylthiacalix[4]arene for selective recovery of platinum from automotive catalyst residue

Manabu Yamada et al.

SUPRAMOLECULAR CHEMISTRY (2014)

Add to Collection

Review Metallurgy & Metallurgical Engineering

Hydrometallurgical recovery/recycling of platinum by the leaching of spent catalysts: A review

Manis Kumar Jha et al.

HYDROMETALLURGY (2013)

Add to Collection

Article Thermodynamics

Adsorption of Au(III), Pd(II), and Pt(IV) from Aqueous Solution onto Graphene Oxide

Li Liu et al.

JOURNAL OF CHEMICAL AND ENGINEERING DATA (2013)

Add to Collection

Article Engineering, Environmental

Platinum Availability for Future Automotive Technologies

Elisa Alonso et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Multiwfn: A multifunctional wavefunction analyzer

Tian Lu et al.

JOURNAL OF COMPUTATIONAL CHEMISTRY (2012)

Add to Collection

Article Chemistry, Organic

Alkylammonium Cation Complexation into the Narrow Cavity of Dihomooxacalix[4]arene Macrocycle

Carmine Gaeta et al.

JOURNAL OF ORGANIC CHEMISTRY (2012)

Add to Collection

Article Engineering, Chemical

Preparation and uranyl ion extraction studies of calix[4]arene-based magnetite nanoparticles

Serkan Sayin et al.

DESALINATION (2011)

Add to Collection

Article Engineering, Chemical

Synthesis of calix[4]arene bearing pyridinium units supported silica gel for sorption of arsenate and dichromate anions

Serkan Sayin et al.

DESALINATION (2010)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Separation of platinum and palladium from chloride solution by solvent extraction using Alamine 300

Basudev Swain et al.

HYDROMETALLURGY (2010)

Add to Collection

Review Chemistry, Inorganic & Nuclear

Coordination chemistry of calix[4]arene derivatives with lower rim functionalisation and their applications

Bernadette S. Creaven et al.

COORDINATION CHEMISTRY REVIEWS (2009)

Add to Collection

Review Chemistry, Physical

Universal Solvation Model Based on Solute Electron Density and on a Continuum Model of the Solvent Defined by the Bulk Dielectric Constant and Atomic Surface Tensions

Aleksandr V. Marenich et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2009)

Add to Collection

Article Chemistry, Applied

The synthesis and complexation of novel azosubstituted calix[4]arenes and thiacalix[4]arenes

Kamil Lang et al.

DYES AND PIGMENTS (2008)

Add to Collection

Article Engineering, Chemical

Selective thiacalix[4]arene bearing three amide groups as ionophore of binary Pd(II) and Au(III) extraction by a supported liquid membrane system

Asma Zaghbani et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2007)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis and inclusion properties of a novel thiacalix[4]arene-based hard-soft receptor with 1,3-alternate conformation

Takehiko Yamato et al.

JOURNAL OF INCLUSION PHENOMENA AND MACROCYCLIC CHEMISTRY (2006)

Add to Collection

Review Chemistry, Applied

A review of methods of separation of the platinum-group metals through their chloro-complexes

FL Bernardis et al.

REACTIVE & FUNCTIONAL POLYMERS (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.