4.8 Article

Novel BaO-decorated carbon-tolerant Ni-YSZ anode fabricated by an efficient phase inversion-impregnation approach

Related references

Note: Only part of the references are listed.
Article Materials Science, Ceramics

A finger-like anode with infiltrated Ni0.1Ce0.9O2-& delta; catalyst using new phase inversion combined tape-casting technology for optimized dry reforming of methane

Yuhang Sha et al.

Summary: A finger-like porous NiO-8%mol doped ZrO2 (YSZ) anode substrate was fabricated using a new phase-inversion combined tape casting technique, and impregnated with Ni0.1Ce0.9O2-δ as catalyst. The conversion rates of CH4 and CO2 in the dry reforming of methane were greatly improved, leading to high electrochemical performance and stability in fuel conversion rates of the button cells.

CERAMICS INTERNATIONAL (2023)

Article Chemistry, Physical

A cathode-supported solid oxide fuel cell prepared by the phase-inversion tape casting and impregnating method

Huilin Zhang et al.

Summary: A cathode-supported SOFC with improved electrochemical performance was successfully fabricated in this study, and the mechanism of electrochemical reaction was investigated using the DRT method. The results showed that the impregnated LSC particles increased the triple phase-boundaries and improved the oxygen reduction reaction rate.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Chemistry, Physical

Novel in-situ MgO nano-layer decorated carbon-tolerant anode for solid oxide fuel cells

Yun Xie et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Chemistry, Physical

Optimization of Ni YSZ anodes for tubular SOFC by a novel and efficient phase inversion-impregnation approach

Zongying Han et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Article Materials Science, Multidisciplinary

Cell-protecting regeneration from anode carbon deposition using in situ produced oxygen and steam: A combined experimental and theoretical study

Zongying Han et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)

Review Chemistry, Physical

Tailoring SOFC Electrode Microstructures for Improved Performance

Paul A. Connor et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Physical

Enhanced coking tolerance of a MgO-modified Ni cermet anode for hydrocarbon fueled solid oxide fuel cells

Qi Yang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Chemistry, Physical

Theoretical investigation of the methane cracking reaction pathways on Ni (111) surface

Jingde Li et al.

CHEMICAL PHYSICS LETTERS (2015)

Article Electrochemistry

Anode substrate with continuous porosity gradient for tubular solid oxide fuel cells

Long Chen et al.

ELECTROCHEMISTRY COMMUNICATIONS (2014)

Article Materials Science, Multidisciplinary

Fabrication and characterization of GDC electrolyte/electrode integral SOFC with BaO/Ni-GDC anode

Xibao Li et al.

MATERIALS RESEARCH BULLETIN (2014)

Article Chemistry, Physical

Barium-modified NiO-YSZ/NiO-GDC cermet as new anode material for solid oxide fuel cells (SOFC)

Monica V. Sandoval et al.

SOLID STATE IONICS (2014)

Article Chemistry, Physical

Barium oxide promoted Ni/YSZ solid-oxide fuel cells for direct utilization of methane

Shamiul Islam et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Article Electrochemistry

Carbon Monoxide Fueled Cone-Shaped Tubular Solid Oxide Fuel Cell with (Ni0.75Fe0.25-5% MgO)/YSZ Anode

Yan Liu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Article Chemistry, Physical

Insight into CH4 dissociation on NiCu catalyst: A first-principles study

Hongyan Liu et al.

APPLIED SURFACE SCIENCE (2012)

Review Chemistry, Physical

Nanoscale and nano-structured electrodes of solid oxide fuel cells by infiltration: Advances and challenges

San Ping Jiang

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

Article Biochemical Research Methods

NIH Image to ImageJ: 25 years of image analysis

Caroline A. Schneider et al.

NATURE METHODS (2012)

Review Green & Sustainable Science & Technology

Comparative study of different fuel cell technologies

S. Mekhilef et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)

Article Chemistry, Physical

Direct octane fuel cells: A promising power for transportation

Mingfei Liu et al.

NANO ENERGY (2012)

Article Chemistry, Physical

(Ni0.75Fe0.25-xMgO)/YSZ anode for direct methane solid-oxide fuel cells

Yan Liu et al.

JOURNAL OF POWER SOURCES (2011)

Article Electrochemistry

Micro-tubular solid oxide fuel cells fabricated by phase-inversion method

Chenghao Yang et al.

ELECTROCHEMISTRY COMMUNICATIONS (2010)

Article Engineering, Chemical

Effects on microstructure of NiO-YSZ anode support fabricated by phase-inversion method

Chao Jin et al.

JOURNAL OF MEMBRANE SCIENCE (2010)

Article Electrochemistry

Improvement of Ni/SDC anode by alkaline earth metal oxide addition for direct methane-solid oxide fuel cells

Makiko Asamoto et al.

ELECTROCHEMISTRY COMMUNICATIONS (2009)

Article Multidisciplinary Sciences

An octane-fueled olid oxide fuel cell

ZL Zhan et al.

SCIENCE (2005)

Article Crystallography

First principles methods using CASTEP

SJ Clark et al.

ZEITSCHRIFT FUR KRISTALLOGRAPHIE (2005)

Article Materials Science, Multidisciplinary

A generalized synchronous transit method for transition state location

N Govind et al.

COMPUTATIONAL MATERIALS SCIENCE (2003)

Letter Chemistry, Physical

A redox-stable efficient anode for solid-oxide fuel cells

SW Tao et al.

NATURE MATERIALS (2003)

Review Chemistry, Multidisciplinary

Solid oxide fuel cells

RM Ormerod

CHEMICAL SOCIETY REVIEWS (2003)

Article Chemistry, Physical

Study on steam reforming of CH4 and C2 hydrocarbons and carbon deposition on Ni-YSZ cermets

T Takeguchi et al.

JOURNAL OF POWER SOURCES (2002)

Article Multidisciplinary Sciences

Materials for fuel-cell technologies

BCH Steele et al.

NATURE (2001)

Article Multidisciplinary Sciences

Direct oxidation of hydrocarbons in a solid-oxide fuel cell

SD Park et al.

NATURE (2000)