☆ 4.6 Article

Effects of ethylammonium and rubidium addition to guanidinium-based CH3NH3PbI3 perovskite photovoltaic devices prepared at 190 °C in ambient air

MATERIALS TODAY COMMUNICATIONS (2024)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Structural and Photophysical Properties of Guanidinium-Iodide-Treated Perovskite Solar Cells

Mostafa Othman et al.

Summary: The use of guanidinium iodide (GAI) cation as an interface engineering technique in perovskite solar cells improves stability by passivating defects on surfaces and grain boundaries. However, the relationship between structural and photophysical properties is not well understood. This study demonstrates that an optimal concentration of GAI can eliminate excess PbI2, improve crystallinity, and increase grain size. Higher concentrations induce the formation of new phases and reduce crystallinity and grain size. GAI treatment also helps remove microscale heterogeneities, resulting in optimum device performance.

SOLAR RRL (2023)

Add to Collection

Article Physics, Applied

First-principles calculations and device characterizations of formamidinium-cesium lead triiodide perovskite crystals stabilized by germanium or copper

Ayu Enomoto et al.

Summary: To prevent the formation of the photo-inactive d-phase of formamidinium-cesium lead triiodide, copper or germanium was added to the perovskite compounds to stabilize the photoactive a-phase. The substitution of lead by germanium (Ge) or copper (Cu) was found to stabilize the a-phase. First-principles molecular dynamics calculations showed that the displacements of formamidinium molecules were suppressed by Ge doping. X-ray diffraction results indicated that Ge or Cu doping of the perovskite compounds effectively suppressed the phase transition from a- to d-phase.

JAPANESE JOURNAL OF APPLIED PHYSICS (2023)

Add to Collection

Article Physics, Applied

First-principles calculation analysis and photovoltaic properties of Cu compound-added perovskite solar cells

Riku Okumura et al.

Summary: Experiments and first-principles calculations were conducted to study the effects of Cu substitution in CH3NH3PbI3 perovskite crystals. The calculations showed that the Cu d orbital formed above the VB maximum could act as an acceptor or defect level. The impact of Cu addition on device properties was investigated, and the device with 2% Cu exhibited higher efficiencies than the standard device. However, the decrease in short-circuit current density with increasing Cu content was attributed to the defect level of the Cu d orbitals. The first-principles calculations and experimental results provided insights into the role of Cu in CH3NH3-based perovskite crystals.

JAPANESE JOURNAL OF APPLIED PHYSICS (2023)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Effects of Co-Addition of Guanidinium and Cesium to CH3NH3PbI3 Perovskite Solar Cells

Takeo Oku et al.

Summary: The effects of co-additions of guanidinium (GA) and cesium (Cs) on methylammonium lead iodide (MAPbI(3)) perovskite solar cells were studied. First-principles calculations showed a decrease in total energy by the addition of GA. Although the co-addition of GA/Cs was found to decrease carrier mobilities, it improved the device performance. This improvement can be attributed to enhanced grain growth and reduced defects. The changes in conversion efficiencies of the best performing device were small, indicating the effectiveness of the GA/Cs co-addition for device stability.

INORGANICS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Tailoring Interlayer Spacers for Efficient and Stable Formamidinium-Based Low-Dimensional Perovskite Solar Cells

Lei Cheng et al.

Summary: By introducing a secondary interlayer spacer, the film quality of formamidinium-based low-dimensional perovskite is substantially improved, leading to enhanced device performance.

ADVANCED MATERIALS (2022)

Add to Collection

Article Physics, Applied

Fabrication and characterization of CH3NH3PbI3 solar cells with added guanidinium and inserted with decaphenylpentasilane

Iori Ono et al.

Summary: This study investigated the effects of adding guanidinium (GA) on CH3NH3PbI3 perovskite solar cells fabricated at a high temperature. The results showed that the addition of GA and the insertion of decaphenylpentasilane between the perovskite and hole transport layer improved the external quantum efficiency and short-circuit current density of the cells. The conversion efficiencies remained stable after one month. X-ray diffraction revealed an increased lattice constant and improved surface morphology with the addition of GA.

JAPANESE JOURNAL OF APPLIED PHYSICS (2022)

Add to Collection

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Effects of Adding Alkali Metals and Organic Cations to Cu-Based Perovskite Solar Cells

Riku Okumura et al.

Summary: First-principles electronic band calculations were used to investigate the effects of alkali metals and organic cations added to Cu-based perovskite solar cells. The study found that the addition of Cu and Na increased the solar conversion efficiencies, in agreement with the calculations. Excitation from iodine p-orbitals and copper d-orbitals to alkali metal s-orbitals could suppress carrier recombination and promote carrier transport.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Reducing Defects of All-Inorganic ?-CsPbI2Br Thin Films by Ethylammonium Bromide Additives for Efficient Perovskite Solar Cells

Jyoti Patil et al.

Summary: This study successfully deposited ethylammonium perovskite thin films under ambient conditions and found that ethylammonium bromide additive helps to obtain highly crystalline and large-grain perovskite films. Devices fabricated with an optimized amount of ethylammonium bromide exhibited the highest power conversion efficiency and demonstrated good long-term stability under thermal stress.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Effects of Cu, K and Guanidinium Addition to CH3NH3PbI3 Perovskite Solar Cells

Ayu Enomoto et al.

Summary: In this study, perovskite solar cells with added copper and potassium or guanidinium were fabricated and characterized. The effects of the additives on the photovoltaic properties and stability of the cells were investigated. The results showed that the addition of copper and potassium improved the stability and conversion efficiency of the solar cells.

JOURNAL OF ELECTRONIC MATERIALS (2022)

Add to Collection

Article Energy & Fuels

Above 23% Efficiency by Binary Surface Passivation of Perovskite Solar Cells Using Guanidinium and Octylammonium Spacer Cations

Naeimeh Mozaffari et al.

Summary: Dimensional engineering technique is an efficient method to improve the performance of perovskite solar cells. This study presents a passivation approach for the perovskite/hole transport layer interface using a mixture of guanidinium and n-octylammonium cations. The dual-cation passivation layer provides higher voltage and efficiency, as well as better stability, with a more hydrophobic and smoother surface.

SOLAR RRL (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Roles of Organic Ligands in Ambient Stability of Layered Halide Perovskites

Yalan Zhang et al.

Summary: This study reveals the key role of organic ligands in the structural stability and morphological evolution of layered perovskites. The presence of hydration-prone BDA ligands in perovskites leads to decreased intrinsic stability and deteriorated optoelectronic properties during ambient aging. On the other hand, the presence of GA ligands enhances the intrinsic structural stability and optoelectronic properties, resulting in less performance degradation during aging.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Multidisciplinary Sciences

Compositional texture engineering for highly stable wide-bandgap perovskite solar cells

Qi Jiang et al.

Summary: This study demonstrates the development of highly stable and efficient wide-bandgap perovskite solar cells through a combination of rapid bromine crystallization and gentle gas-quenching method. The resulting perovskite films exhibit reduced defect density and enable the realization of high efficiency and operational stability in wide-bandgap perovskite solar cells. Additionally, the integration of narrow-bandgap perovskite solar cells leads to the creation of an all-perovskite, two-terminal tandem device with high open-circuit voltage.

SCIENCE (2022)

Add to Collection

Article Multidisciplinary Sciences

Deterministic fabrication of 3D/2D perovskite bilayer stacks for durable and efficient solar cells

Siraj Sidhik et al.

Summary: Realizing solution-processed heterostructures in halide perovskites is a long-standing challenge due to solvent incompatibilities. However, by utilizing the solvent dielectric constant and Gutmann donor number, it is possible to grow phase-pure two-dimensional (2D) halide perovskite stacks with desired composition, thickness, and bandgap onto 3D perovskites without dissolving the underlying substrate. The thickness dependence of the 2D perovskite layer shows expected trends for different device architectures, indicating the influence of band alignment and carrier transport limits.

SCIENCE (2022)

Add to Collection

Article Optics

Ethylammonium Bromide- and Potassium-Added CH3NH3PbI3 Perovskite Solar Cells

Shuhei Terada et al.

Summary: In this study, perovskite solar cells were successfully fabricated in ordinary air by using perovskite solutions with added potassium iodide and ethylammonium bromide, which improved the performance of the cells. First-principles calculations were in agreement with the experimental results, providing a theoretical basis for enhancing device stability and photovoltaic properties.

PHOTONICS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient and stable formamidinium-caesium perovskite solar cells and modules from lead acetate-based precursors

Jie Zhao et al.

Summary: Controlling the crystallization process of perovskite thin films is crucial for enhancing the quality and efficiency of perovskite solar cells. This study explores the use of lead acetate as a precursor to form mixed A-cation perovskites and achieves high-quality films with a power conversion efficiency of up to 21.0%. The developed method shows great potential in upscaling perovskite solar cell technology.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Add to Collection

Article Engineering, Multidisciplinary

Fabrication and Characterization of SnCl2- and CuBr-Added Perovskite Photovoltaic Devices

Yugo Asakawa et al.

Summary: Perovskite photovoltaic devices added with Sn and Cu were fabricated and characterized, showing improved performance and reduced energy gap.

TECHNOLOGIES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Balanced change in crystal unit cell volume and strain leads to stable halide perovskite with high guanidinium content

Patricio Serafini et al.

Summary: Recent studies suggest that strain plays a significant role in determining the efficiency and stability of halide perovskite devices. This study systematically characterizes the phenomenon in a standard methylammonium lead iodine perovskite system, by substituting some methylammonium with guanidinium, incorporating PbS quantum dot additives, and combining guanidinium and PbS. The results show that the control of strain and unit cell volume expansion can significantly improve the efficiency and stability of solar cells.

RSC ADVANCES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Facile Fabrication of Self-Assembly Functionalized Polythiophene Hole Transporting Layer for High Performance Perovskite Solar Cells

Chi-Yuan Chang et al.

Summary: Ultra-uniform hole-transporting material (HTM) fabricated by self-assembling COOH-functionalized P3HT allows for the growth of high-quality perovskite thin films, resulting in devices with higher open-circuit voltage and extended lifetime. The self-assembly approach optimizes the growth of perovskite crystalline films, providing a new facile way for the fabrication of high-efficiency perovskite devices.

ADVANCED SCIENCE (2021)

Add to Collection

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Add to Collection

Article Chemistry, Physical

Interfacial Passivation Engineering of Perovskite Solar Cells with Fill Factor over 82% and Outstanding Operational Stability on n-i-p Architecture

Bowen Yang et al.

Summary: The use of cyclohexylethylammonium iodide (CEAI) as an interface material successfully improved the fill factor and power conversion efficiency of perovskite solar cells. This was achieved through the formation of a 2D perovskite interlayer, which reduced trap-assisted recombination and enhanced surface hydrophobicity for outstanding stability.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Energy & Fuels

Insight into the Role of Guanidinium and Cesium in Triple Cation Lead Halide Perovskites

Susana Ramos-Terron et al.

Summary: The impact of partial replacement of methylammonium in the MAPbI(3) perovskite with cesium or guanidinium cations to fabricate thin films of triple cation Cs(x)Gua(y)MA(1-x-y)PbI(3) perovskites was studied. Structural changes and optoelectronic properties were found to be significantly affected by the incorporation of cesium or guanidinium.

SOLAR RRL (2021)

Add to Collection

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Additive Effects of Guanidinium Iodide on CH3NH3PbI3 Perovskite Solar Cells

Taku Kishimoto et al.

Summary: The addition of a small amount of guanidinium (GA(+)) improves the photoconversion efficiencies and stabilities of CH3NH3PbI3 (MAPbI(3)) perovskite solar cells. The lattice volumes are increased by the presence of GA(+), while energy gaps are decreased. Furthermore, the carrier trap density is reduced by GA(+) doping, suggesting the suppression of lattice defects.

PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of Polysilane Addition to Chlorobenzene and High Temperature Annealing on CH3NH3PbI3 Perovskite Photovoltaic Devices

Takeo Oku et al.

Summary: In this study, CH3NH3PbI3 perovskite photovoltaic devices treated with a polysilane layer showed high photoconversion efficiencies even after 255 days in ambient air. Raman scattering spectroscopy and ab initio molecular orbital calculations suggested that the polysilane layer increased hole transport efficiency in the treated devices, which was confirmed by their high shunt resistances.

COATINGS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of mixed-valence states of Eu-doped FAPbI3 perovskite crystals studied by first-principles calculation

Atsushi Suzuki et al.

Summary: The study shows that the incorporation of europium affects the electronic structure and effective mass of perovskite crystals, potentially improving carrier mobility. The hybrid orbitals distribution caused by the doping of Eu3+ ions influences band dispersion and may enhance carrier transport efficiency.

MATERIALS ADVANCES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Unraveling the compositional heterogeneity and carrier dynamics of alkali cation doped 3D/2D perovskites with improved stability

Ming-Chun Tang et al.

Summary: Researchers have developed a novel 3D/2D layered perovskite solar cell by growing a 2D Ruddlesden-Popper layer on top of a 3D rubidium (Rb+)-doped triple-cation perovskite. This structure exhibits higher power conversion efficiency and long-term stability, showing potential for commercial applications.

MATERIALS ADVANCES (2021)

Add to Collection

Review Chemistry, Physical

A Review on Additives for Halide Perovskite Solar Cells

Shuang Liu et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Minimizing non-radiative recombination losses in perovskite solar cells

Deying Luo et al.

NATURE REVIEWS MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Effects of Co-Addition of Sodium Chloride and Copper(II) Bromide to Mixed-Cation Mixed-Halide Perovskite Photovoltaic Devices

Naoki Ueoka et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Energy & Fuels

Polysilane-Inserted Methylammonium Lead Iodide Perovskite Solar Cells Doped with Formamidinium and Potassium

Takeo Oku et al.

ENERGIES (2020)

Add to Collection

Article Multidisciplinary Sciences

Impact of strain relaxation on performance of α-formamidinium lead iodide perovskite solar cells

Gwisu Kim et al.

SCIENCE (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of doping with Na, K, Rb, and formamidinium cations on (CH3NH3)0.99Rb0.01Pb0.99Cu0.01I3-x(Cl, Br)x perovskite photovoltaic cells

Naoki Ueoka et al.

AIP ADVANCES (2020)

Add to Collection

Article Materials Science, Ceramics

Fabrication and characterization of potassium- and formamidinium-added perovskite solar cells

Satsuki Kandori et al.

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Crystal structures of perovskite halide compounds used for solar cells

Takeo Oku

REVIEWS ON ADVANCED MATERIALS SCIENCE (2020)

Add to Collection

Article Multidisciplinary Sciences

Perovskite-polymer composite cross-linker approach for highly-stable and efficient perovskite solar cells

Tae-Hee Han et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Stable Triple-Cation (Cs+-MA+-FA+) Perovskite Powder Formation under Ambient Conditions for Hysteresis-Free High-Efficiency Solar Cells

Ranbir Singh et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Multidisciplinary Sciences

Atomic-level passivation mechanism of ammonium salts enabling highly efficient perovskite solar cells

Essa A. Alharbi et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Physical

Tailoring Triple-Anion Perovskite Material for Indoor Light Harvesting with Restrained Halide Segregation and Record High Efficiency Beyond 36%

Rui Cheng et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Effects of annealing temperature on decaphenylcyclopentasilane-inserted CH3NH3PbI3 perovskite solar cells

Masaya Taguchi et al.

CHEMICAL PHYSICS LETTERS (2019)

Add to Collection

Article Multidisciplinary Sciences

Light Intensity-dependent Variation in Defect Contributions to Charge Transport and Recombination in a Planar MAPbI3 Perovskite Solar Cell

Shinyoung Ryu et al.

SCIENTIFIC REPORTS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Additive effects of alkali metals on Cu-modified CH3NH3PbI3-δClδ photovoltaic devices

Naoki Ueoka et al.

RSC ADVANCES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Large-Grain Tin-Rich Perovskite Films for Efficient Solar Cells via Metal Alloying Technique

Mohammad Mahdi Tavakoli et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced charge carrier mobility and lifetime suppress hysteresis and improve efficiency in planar perovskite solar cells

Silver-Hamill Turren-Cruz et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Formation of Stable Mixed Guanidinium-Methylammonium Phases with Exceptionally Long Carrier Lifetimes for High-Efficiency Lead Iodide-Based Perovskite Photovoltaics

Dominik J. Kubicki et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Highly (100)-oriented CH3NH3PbI3(Cl) perovskite solar cells prepared with NH4Cl using an air blow method

Takeo Oku et al.

RSC ADVANCES (2018)

Add to Collection

Article Chemistry, Physical

Photodecomposition and thermal decomposition in methylammonium halide lead perovskites and inferred design principles to increase photovoltaic device stability

Emilio J. Juarez-Perez et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Energy & Fuels

A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells

Nam Joong Jeon et al.

NATURE ENERGY (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Progress on lead-free metal halide perovskites for photovoltaic applications: a review

Sebastian F. Hoefler et al.

MONATSHEFTE FUR CHEMIE (2017)

Add to Collection

Article Multidisciplinary Sciences

Fast oxygen diffusion and iodide defects mediate oxygen-induced degradation of perovskite solar cells

Nicholas Aristidou et al.

NATURE COMMUNICATIONS (2017)

Add to Collection

Article Chemistry, Physical

High-Efficiency Rubidium-Incorporated Perovskite Solar Cells by Gas Quenching

Meng Zhang et al.

ACS ENERGY LETTERS (2017)

Add to Collection

Article Energy & Fuels

Large guanidinium cation mixed with methylammonium in lead iodide perovskites for 19% efficient solar cells

Alexander D. Jodlowski et al.

NATURE ENERGY (2017)

Add to Collection

Article Multidisciplinary Sciences

Hysteresis-free perovskite solar cells made of potassium-doped organometal halide perovskite

Zeguo Tang et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Engineering of CH3NH3PbI3 Perovskite Crystals by Alloying Large Organic Cations for Enhanced Thermal Stability and Transport Properties

Wei Peng et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Thermal degradation of CH3NH3PbI3 perovskite into NH3 and CH3I gases observed by coupled thermogravimetry-mass spectrometry analysis

Emilio J. Juarez-Perez et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Guanidinium: A Route to Enhanced Carrier Lifetime and Open-Circuit Voltage in Hybrid Perovskite Solar Cells

Nicholas De Marco et al.

NANO LETTERS (2016)

Add to Collection

Article Multidisciplinary Sciences

Ionic transport in hybrid lead iodide perovskite solar cells

Christopher Eames et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Physics, Applied

Microstructures and photovoltaic properties of perovskite-type CH3NH3PbI3 compounds

Takeo Oku et al.

APPLIED PHYSICS EXPRESS (2014)

Add to Collection

Review Optics

The emergence of perovskite solar cells

Martin A. Green et al.

NATURE PHOTONICS (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.