Related references
Note: Only part of the references are listed.Process-performance-prediction integration for fatigue life improvement technologies: An implementation in cold expansion of hole structures
Kai-Shang Li et al.
INTERNATIONAL JOURNAL OF FATIGUE (2023)
Fretting fatigue total life assessment including wear and a varying critical distance
A. L. Pinto et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
Effect of cold expansion on high-temperature low-cycle fatigue performance of the nickel-based superalloy hole structure
Xin Wang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Experimental and numerical investigation on the fretting fatigue behavior of cold expanded Al-alloy 2024-T3 plates
T. N. Chakherlou et al.
ENGINEERING FAILURE ANALYSIS (2021)
A dynamic cold expansion method to improve fatigue performance of holed structures based on electromagnetic load
Zheng Guo et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Experimental and numerical investigations on the influence of cold expansion on low cycle fatigue life of bolt holes in aeroengine superalloy disk at elevated temperature
Hui Liu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Split sleeve cold expansion of AZ31B sheet: Microstructure, texture and residual stress
Sasan Faghih et al.
MATERIALS & DESIGN (2020)
Continuous fatigue crack length estimation for aluminum 6061-T6 plates with a notch
Hyung Jin Lim et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)
Effects of chamfering, cold expansion, bolt clamping, and their combinations on fatigue life of aluminum-lithium alloy single plate
Yongjie Huang et al.
ADVANCES IN MECHANICAL ENGINEERING (2018)
A new approach for pre-stressing of rail-end-bolt holes
J. T. Maximov et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2017)
Investigation on fatigue performance of cold expansion holes of 6061-T6 aluminum alloy
Wang Yan-li et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Fatigue performance of bonded crack retarders in the presence of cold worked holes and interference-fit fasteners
Abdul Khadar Syed et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Numerical simulations of the fatigue damage evolution at a fastener hole treated by cold expansion or with interference fit pin
Ying Sun et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)
Cold expansion technology of connection holes in aircraft structures: A review and prospect
Fu Yucan et al.
CHINESE JOURNAL OF AERONAUTICS (2015)
Numerical and experimental investigation of the cold expansion process with split sleeve in titanium alloy TC4
X. Yuan et al.
INTERNATIONAL JOURNAL OF FATIGUE (2015)
Prediction of fatigue life in cold expanded fastener holes subjected to bolt tightening in Al alloy 7075-T6 plate
H. Taghizadeh et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)
Fatigue life of cold-expanded fastener holes with interference-fit fasteners at short edge margins
G. M. Vallieres et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2015)
Predicting crack growth in specimens with overloads and cold-worked holes with residual stresses
J. C. Newman et al.
ENGINEERING FRACTURE MECHANICS (2014)
A novel method and tool which enhance the fatigue life of structural components with fastener holes
J. T. Maximov et al.
ENGINEERING FAILURE ANALYSIS (2013)
Fractographic examination of coupons representing aircraft structural joints with and without hole cold expansion
Marko Yanishevsky et al.
ENGINEERING FAILURE ANALYSIS (2013)
Effect of residual stresses induced by cold expansion on the crack growth in 6082 aluminum alloy
Z. Semari et al.
ENGINEERING FRACTURE MECHANICS (2013)
Effect of edge distance ratio on residual stresses induced by cold expansion and fatigue life of TC4 plates
Jun Liu et al.
ENGINEERING FRACTURE MECHANICS (2013)
Prediction of fatigue life in cold expanded Al-alloy 2024-T3 plates used in double shear lap joints
Hadi Taghizadeh et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2013)
A comparative numerical study of combined cold expansion and local torsion on fastener holes
A. H. Shamdani et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2012)
Effect of Hardening Induced by Cold Expansion on Damage Fatigue Accumulation and Life Assessment of Aluminum Alloy 6082 T6
Bendouba Mostefa et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2012)
Correlation of one-dimensional fatigue crack growth at cold-expanded holes using linear fracture mechanics and superposition
Daniel H. Stuart et al.
ENGINEERING FRACTURE MECHANICS (2011)
Study on the Residual Stress Fields, Surface Quality, and Fatigue Performance of Cold Expansion Hole
Yongshou Liu et al.
MATERIALS AND MANUFACTURING PROCESSES (2011)
Cold expansion of holes and resulting fatigue life enhancement and residual stresses in Al 2024 T3 alloy - An experimental study
H. D. Gopalakrishna et al.
ENGINEERING FAILURE ANALYSIS (2010)
Finite element method and experimental investigation on the residual stress fields and fatigue performance of cold expansion hole
Liu Yongshou et al.
MATERIALS & DESIGN (2010)
Predicting corner crack fatigue propagation from cold worked holes
Keith W. Jones et al.
ENGINEERING FRACTURE MECHANICS (2009)
Effect of local cold working on the fatigue life of 7475-T7351 aluminium alloy hole specimens
M. Burlat et al.
ENGINEERING FRACTURE MECHANICS (2008)
The theory of critical distances: a review of its applications in fatigue
Luca Susmel
ENGINEERING FRACTURE MECHANICS (2008)
Effect of cold expansion on fatigue performance of open holes
J. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Numerical and experimental study of the cold expansion process in 7085 plate using a modified split sleeve
M. E. Karabin et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Fatigue crack propagation from a cold-worked hole
S. Pasta
ENGINEERING FRACTURE MECHANICS (2007)
Material fatigue properties for assessing mechanical components weakened by notches and defects
B Atzori et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2005)
A novel method of cold expansion which creates near-uniform compressive tangential residual stress around a fastener hole
TN Chakherlou et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2004)
Residual stress measurement and fatigue crack growth prediction after cold expansion of cracked fastener holes
D Stefanescu et al.
JOURNAL OF AEROSPACE ENGINEERING (2004)
Prediction of the growth rate for fatigue cracks emanating from cold expanded holes
VD Lacarac et al.
INTERNATIONAL JOURNAL OF FATIGUE (2004)
Fatigue life improvement in fatigue-aged fastener holes using the cold expansion technique
X Zhang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2003)
Predicting fatigue crack growth life for cold-worked holes based on existing closed-form residual stress models
Z Wang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2003)