4.7 Article

Design and preparation of ternary polymer nanocomposites for high energy density film capacitors

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

High-performing polysulfate dielectrics for electrostatic energy under harsh conditions

He Li et al.

Summary: Designing high-capacity polymer dielectrics that can operate efficiently under harsh electrical conditions is challenging. However, polysulfates synthesized through SuFEx catalysis were found to be high-performing dielectric polymers that can overcome these challenges. Free-standing polysulfate thin films exhibit superior insulating properties and dielectric stability at high temperatures, which can be further improved with ultrathin oxide coatings. These advancements lead to electrostatic film capacitors with high breakdown strength and discharged energy density, outperforming current state-of-the-art dielectric materials.

JOULE (2023)

Article Nanoscience & Nanotechnology

2D Nanosheet Spray Coating for Scalable Processing of High-Energy-Density Dielectric Polymer Films

Mengjiao Shi et al.

Summary: A surface engineering approach of directly spray coating 2D nanosheets on polymer film surface is reported to improve the energy storage properties of dielectric polymer films. The spraying of 2D calcium niobate nanosheets on biaxially oriented polypropylene films leads to a significant increase in breakdown strength and dielectric constant, resulting in a maximum 64% enhancement of energy density. Ultraviolet irradiation further improves the adhesion of nanosheets and achieves an ultrahigh energy density of 11.6 J cm(-3) with a high energy efficiency of 90%. This work provides a cost-effective and scalable approach to enhance the energy density of dielectric polymer films, which is of great significance for compact and efficient power systems.

ADVANCED ELECTRONIC MATERIALS (2023)

Article Materials Science, Multidisciplinary

High-temperature energy storage dielectric with inhibition of carrier injection/migration based on band structure regulation

Guang Liu et al.

Summary: In this study, a polycarbonate-based energy storage dielectric with BN/SiO2 heterojunctions was designed to improve the insulation performance at high temperatures. The composite film showed excellent high-temperature energy storage properties, with the ability to withstand high electric field intensity even at 150 degrees C.

INFOMAT (2023)

Article Nanoscience & Nanotechnology

Improving high-temperature energy storage performance of PI dielectric capacitor films through boron nitride interlayer

Kaiyi Zhang et al.

Summary: This study introduces a facile preparation method to suppress the conductivity loss of polyimide films by inserting boron nitride interlayer, which significantly reduces the leakage current density and improves the energy density.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article Chemistry, Physical

Ultrahigh charge-discharge efficiency and high energy density of a high-temperature stable sandwich-structured polymer

Hanxi Chen et al.

Summary: This study introduces a sandwich-structured dielectric polymer nanocomposite with superior high-temperature capacitive performances, which can increase the discharged energy density at elevated temperatures. Unlike traditional single-layer designs, this sandwich structure integrates the complementary properties of multiple components in a synergistic manner, providing a new direction for the development of high-temperature dielectric materials.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Engineering, Environmental

High energy density of ferroelectric polymer nanocomposites utilizing PZT@SiO2 nanocubes with morphotropic phase boundary

Bing Xie et al.

Summary: Polymer-based nanocomposites with high εr ceramic fillers embedded in a high-Eb polymer matrix are extensively studied for their potential as flexible dielectrics in high-Ue film capacitors. By designing core-shell structured PZT@SiO2 nanofillers, the paradox between εr and Eb is effectively resolved, resulting in improved Ue and high discharging efficiency.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Materials Science, Composites

Crosslinked polyetherimide nanocomposites with superior energy storage achieved via trace Al2O3 nanoparticles

Lixue Zhu et al.

Summary: This study demonstrates the preparation of polymer dielectric materials that can operate under high temperatures using crosslinked nanocomposites. The nanocomposites improve the dielectric properties by altering the microstructure and facilitating dipole rotations. These materials exhibit excellent dielectric stability, high discharge energy density, and efficient charge-discharge performance at elevated temperatures.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Review Energy & Fuels

A review on polyvinylidene fluoride polymer based nanocomposites for energy storage applications

Ritanjali Behera et al.

Summary: Dielectric polymer nanocomposite materials have great potential for a variety of energy storage applications. This review focuses on the research of Poly (vinylidene fluoride) (PVDF) polymer and copolymer nanocomposites in capacitors, supercapacitors, pulse power energy storage, electric vehicles, energy harvesting, etc. It mainly discusses the electrical characteristics of composite film materials with different types of fillers and suggests that surface modification of nanomaterials can improve the electrical properties of the composites. The use of multilayer nanocomposites has shown promise in enhancing electrical characteristics compared to two-phase and three-phase nanocomposites.

JOURNAL OF ENERGY STORAGE (2022)

Article Polymer Science

All-Organic Dielectrics with High Breakdown Strength and Energy Storage Density for High-Power Capacitors

Qi-Kun Feng et al.

Summary: A novel strategy of blending core-shell structured MBS rubber particles into a polymer matrix is proposed to improve the breakdown strength and energy storage performances of polymer-based films. The blended films exhibit advantages such as reduced crystalline grains, enhanced mechanical properties, and restriction on carrier motion, leading to superior energy storage performance.

MACROMOLECULAR RAPID COMMUNICATIONS (2021)

Article Nanoscience & Nanotechnology

High Energy Storage Performance of PMMA Nanocomposites Utilizing Hierarchically Structured Nanowires Based on Interface Engineering

Bing Xie et al.

Summary: By incorporating BT@SiO2@dopa NWs into the PMMA matrix, the discharge energy density and discharge efficiency of nanocomposites have been significantly improved. Both experimental and theoretical simulations have shown that the double core-shell structure nanowire fillers can effectively alleviate local field distortion, inhibit leakage current, and suppress remnant electric displacement, resulting in high energy density and efficiency. These findings are conducive to the development of high-performance film dielectric capacitor materials using PMMA-based nanocomposites for high energy storage density.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

Ultrahigh Energy Storage Performance of Layered Polymer Nanocomposites over a Broad Temperature Range

Peng Wang et al.

Summary: The layered polymer composite shows higher dielectric constant and improved capacitive performance under high temperatures and voltages, with lower dielectric loss compared to current polymer materials. This efficient route to dielectric polymeric materials demonstrates high energy densities and low loss over a broad temperature range.

ADVANCED MATERIALS (2021)

Proceedings Paper Polymer Science

Effect of BaTiO3 Nanofillers on the Energy Storage Performance of Polymer Nanocomposites

Anju Yadav et al.

Summary: Polymer nanocomposites with barium titanate fillers exhibit superior energy storage performance due to enhanced breakdown strength and improved dielectric properties. The concentration of barium titanate fillers plays a crucial role in achieving large dielectric constants and energy densities in ceramic/polymer composites for energy storage device applications.

MACROMOLECULAR SYMPOSIA (2021)

Article Chemistry, Physical

High-temperature all-organic energy storage dielectric with the performance of self-adjusting electric field distribution

Guang Liu et al.

Summary: In this study, a composite dielectric material of polycarbonate (PC) and poly(vinylidene fluoride) (PVDF) was prepared, which demonstrated a self-adjusting electric field distribution behavior at high temperatures. This new material not only prevents premature breakdown of PVDF, but also improves energy storage density and charge-discharge efficiency.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Nanoscience & Nanotechnology

Multilayer Structured Poly(vinylidene fluoride)-Based Composite Film with Ultrahigh Breakdown Strength and Discharged Energy Density

Yongjing Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Engineering, Electrical & Electronic

Polymer nanocomposites for high-energy-density capacitor dielectrics: Fundamentals and recent progress

Qi Li et al.

IEEE ELECTRICAL INSULATION MAGAZINE (2020)

Article Multidisciplinary Sciences

Polymer/molecular semiconductor all-organic composites for high-temperature dielectric energy storage

Chao Yuan et al.

NATURE COMMUNICATIONS (2020)

Article Engineering, Environmental

Polymer-based dielectric nanocomposites with high energy density via using natural sepiolite nanofibers

Shaonan Chen et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Physics, Applied

High energy storage performance for dielectric film capacitors by designing 1D SrTiO3@SiO2 nanofillers

Bing Xie et al.

JOURNAL OF ADVANCED DIELECTRICS (2018)

Article Physics, Applied

Insulated gate and surface passivation structures for GaN-based power transistors

Zenji Yatabe et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2016)

Article Multidisciplinary Sciences

Flexible high-temperature dielectric materials from polymer nanocomposites

Qi Li et al.

NATURE (2015)

Article Multidisciplinary Sciences

A dielectric polymer with high electric energy density and fast discharge speed

Baojin Chu et al.

SCIENCE (2006)

Article Nanoscience & Nanotechnology

Internal charge behaviour of nanocomposites

JK Nelson et al.

NANOTECHNOLOGY (2004)

Article Engineering, Electrical & Electronic

Surface passivation of GaN and GaN/AlGaN heterostructures by dielectric films and its application to insulated-gate heterostructure transistors

T Hashizume et al.

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2003)