Journal
PROGRESS IN ORGANIC COATINGS
Volume 187, Issue -, Pages -Publisher
ELSEVIER SCIENCE SA
DOI: 10.1016/j.porgcoat.2023.108108
Keywords
Holography; Photopolymer; Thin film coating; Volume transmission grating; Automatic film coater
Ask authors/readers for more resources
In this study, holographic films were prepared using an automatic film applicator, and their performance was compared with films prepared by other methods. The results showed that holographic films prepared with the automatic film applicator had higher diffraction efficiency and more uniform thickness, making them suitable for holographic applications.
Photopolymer films are preferred choice as hologram recording material due to their inherent advantages of reliability, affordability and ease of preparation. For fabrication of these films, different techniques are adopted such as dip coating, spin coating, drop casting etc. The spin coating, and dip coating techniques also find extensive utilization across numerous applications but they have limitations specifically in realizing uniform thickness of films over a larger area. The use of an automatic film applicator based on doctor blade technique is currently a highly advantageous method for use in pharmaceutical applications and offers significant benefits in terms of good uniformity with controlled thickness. In this study, holographic films are prepared using this automatic film applicator. Experimental evidence demonstrates the homogeneity and uniformity of the films fabricated. For a 7.15 mm scan length, the surface roughness of films employing the aforementioned method is 5.1 nm. For optimization purpose, photopolymer film composed of acrylamide (AA) and polyvinyl alcohol (PVA) is prepared. The films prepared with automatic film coater are also compared with the film prepared with other techniques such as drop coating and spin coating and it is observed that the photopolymer film realized by this method is capable of recording holographic gratings with 75 % diffraction efficiency, which is 53 % and 42 % in spin coated and drop casted films respectively for 90 mu m thickness. The results indicate that the automatic film applicator based on doctor blade can potentially be implemented to create uniform, and better-quality photopolymer films for holographic applications while maintaining good repeatability with controlled thickness.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available