4.8 Article

Electrolyte-Gated Perovskite Transistors Functionalized with Conjugated Polymers

Related references

Note: Only part of the references are listed.
Article Polymer Science

Structurally-tuned benzo[1,2-b:4,5:b']dithiophene-based polymer as a dopant-free hole transport material for perovskite solar cells

Henry Opoku et al.

Summary: By modulating the pyridine content in the polymer, a high performance dopant-free hole transport material was developed for perovskite solar cells, leading to significantly improved power conversion efficiencies up to 21.1%.

JOURNAL OF POLYMER SCIENCE (2022)

Article Engineering, Electrical & Electronic

High-performance inorganic metal halide perovskite transistors

Ao Liu et al.

Summary: This study reports on the successful fabrication of high-performance p-channel transistors by optimizing the doping and crystallization behavior of solution-processed metal halide perovskite thin films. The optimized transistors exhibit high hole mobility, high on/off current ratios, as well as high operational stability and reproducibility.

NATURE ELECTRONICS (2022)

Article Chemistry, Applied

Inclusion of triphenylamine unit in dopant-free hole transport material for enhanced interfacial interaction in perovskite photovoltaics

Ji Hyeon Lee et al.

Summary: In this study, a high-performance dopant-free hole transport material (HTM) was developed by partially substituting a conjugated polymer with a triphenylamine unit. The modified HTM showed enhanced interaction with perovskite and improved passivation ability. Additionally, an increase in face-on oriented crystallites after the substitution enhanced the charge transport ability of the HTM. The perovskite photovoltaics (PPVs) fabricated using the triphenylamine-substituted HTM exhibited a higher efficiency of 20.4% and enhanced long-term stability compared to the devices using a control polymer without triphenylamine substitution (15.8%).

DYES AND PIGMENTS (2022)

Article Nanoscience & Nanotechnology

Exploiting the full advantages of colloidal perovskite nanocrystals for large-area efficient light-emitting diodes

Young-Hoon Kim et al.

Summary: In this study, highly efficient large-area PeLEDs with high uniformity were achieved through the use of colloidal perovskite nanocrystals. The precrystallized PNCs were not affected by the film formation process and a modified bar-coating method facilitated the formation of uniform large-area films. This method shows promise for the development of large-scale industrial displays and solid-state lighting.

NATURE NANOTECHNOLOGY (2022)

Article Multidisciplinary Sciences

Reconfigurable halide perovskite nanocrystal memristors for neuromorphic computing

Rohit Abraham John et al.

Summary: This study presents a reconfigurable halide perovskite nanocrystal memristor that can switch between different modes and has excellent endurance. It addresses the diverse switching requirements of various computing frameworks.

NATURE COMMUNICATIONS (2022)

Article Multidisciplinary Sciences

Ultra-bright, efficient and stable perovskite light-emitting diodes

Joo Sung Kim et al.

Summary: This study reports the development of ultra-bright, efficient, and stable light-emitting diodes (PeLEDs) made of core/shell perovskite nanocrystals. The nanocrystals, obtained through in situ reaction of benzylphosphonic acid with polycrystalline perovskite films, demonstrate strong carrier confinement and maintain good charge-transport properties.

NATURE (2022)

Review Materials Science, Multidisciplinary

Application of Ionic Liquids and Derived Materials to High-Efficiency and Stable Perovskite Solar Cells

Junsheng Luo et al.

Summary: Ionic liquids have shown great potential for improving device efficiency and stability in metal halide perovskite solar cells (PSCs). This review provides an overview of the structure and properties of typical ionic liquids and discusses their various applications in different layers of PSCs. The interaction between ionic liquids and function layers, as well as the relationship between molecular structures of ionic liquids and the photovoltaic performances of PSCs, are also emphasized.

ACS MATERIALS LETTERS (2022)

Article Materials Science, Multidisciplinary

Pyridine Derivatives' Surface Passivation Enables Efficient and Stable Carbon-Based Perovskite Solar Cells

Kai Zou et al.

Summary: Surface passivation is an effective strategy to reduce defects in perovskite solar cells. In this study, the passivation effects of pyridine and its derivatives with different functional groups were compared. Py-NH2 was found to be the best passivation agent, reducing defect density and improving conversion efficiency and long-term stability in carbon-based perovskite solar cells.

ACS MATERIALS LETTERS (2022)

Article Chemistry, Physical

High-Performance Layered Perovskite Transistors and Phototransistors by Binary Solvent Engineering

Huihui Zhu et al.

Summary: Perovskite materials have been successfully utilized in high-performance p-channel lead-free layered perovskite phenethylammonium tin iodide TFTs, showing improved mobility, current on/off ratio, and bias stress stability. Complementary inverters with high gain and optimized perovskite phototransistors with remarkable photodetectivity have also been demonstrated, attracting attention for potential applications beyond the energy sector.

CHEMISTRY OF MATERIALS (2021)

Article Multidisciplinary Sciences

Distribution control enables efficient reduced-dimensional perovskite LEDs

Dongxin Ma et al.

Summary: By using a fluorinated triphenylphosphine oxide additive to control cation diffusion and passivate surfaces, the efficiency and operating lifetimes of perovskite light-emitting diodes have been improved. Although reduced-dimensional perovskites show promise in increasing stability and photoluminescence quantum yield, challenges such as lower EQEs and inferior color purities remain.

NATURE (2021)

Article Chemistry, Multidisciplinary

Stable Layered 2D Perovskite Solar Cells with an Efficiency of over 19% via Multifunctional Interfacial Engineering

Yawen Huang et al.

Summary: Scientists successfully optimized the secondary crystallization process of 2D perovskite through multifunctional interface engineering, achieving efficient and stable solar cells with high conversion efficiency, which could retain high efficiency even after long-term storage under ambient conditions.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Article Nanoscience & Nanotechnology

Charge Transport in 2D Layered Mixed Sn-Pb Perovskite Thin Films for Field-Effect Transistors

Cuiqing Qin et al.

Summary: The synthesis and tuning of physical properties of 2D layered Sn-Pb perovskite solid solutions were reported, showing significant impact on transistor performance. Field-effect transistors constructed on cheap polymer dielectrics demonstrated good performance for the first time. The work contributes to enhancing understanding of ion migration mechanisms in 2D layered perovskite field-effect transistors.

ADVANCED ELECTRONIC MATERIALS (2021)

Article Chemistry, Physical

A tailored graft-type polymer as a dopant-free hole transport material in indoor perovskite photovoltaics

Henry Opoku et al.

Summary: A novel graft-type polymer composed of benzo[1,2-b:4,5-b ']dithiophene-based main chain and poly(ethylene glycol) side chains was developed as an efficient dopant-free hole transport material for perovskite photovoltaics, exhibiting high hole mobility and improved device stability. The optimized polymeric HTM showed significantly high power conversion efficiencies of 38.2% and 21.7% under different light conditions.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Engineering, Electrical & Electronic

High-Performance Organic Field-Effect Transistors Gated by Imidazolium-Based Ionic Liquids

Yogesh Yadav et al.

Summary: By utilizing imidazolium-based ionic liquid (IL) gating in organic field-effect transistors (OFETs), high charge carrier density and hole mobility in P3HT have been achieved, positioning these devices as potential candidates for electrical sensor platforms. The systematic variation of IL components and gate-electrode metal work function also provide insights into the electrical performance of the OFETs. Additionally, the long shelf life of IL-gated OFETs further enhances their practicality for various applications.

ACS APPLIED ELECTRONIC MATERIALS (2021)

Article Multidisciplinary Sciences

A general approach for hysteresis-free, operationally stable metal halide perovskite field-effect transistors

Satyaprasad P. Senanayak et al.

SCIENCE ADVANCES (2020)

Article Chemistry, Multidisciplinary

Crown Ether Modulation Enables over 23% Efficient Formamidinium-Based Perovskite Solar Cells

Tzu-Sen Su et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Review Materials Science, Multidisciplinary

Strain Engineering in Halide Perovskites

Erin G. Moloney et al.

ACS MATERIALS LETTERS (2020)

Article Multidisciplinary Sciences

Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss

Mingyu Jeong et al.

SCIENCE (2020)

Article Nanoscience & Nanotechnology

Dimensionality Dependent Plasticity in Halide Perovskite Artificial Synapses for Neuromorphic Computing

Sung-Il Kim et al.

ADVANCED ELECTRONIC MATERIALS (2019)

Article Chemistry, Multidisciplinary

Ambipolar Triple Cation Perovskite Field Effect Transistors and Inverters

Abd Rashid Bin Mohd Yusoff et al.

ADVANCED MATERIALS (2017)

Article Multidisciplinary Sciences

Understanding charge transport in lead iodide perovskite thin-film field-effect transistors

Satyaprasad P. Senanayak et al.

SCIENCE ADVANCES (2017)

Article Chemistry, Multidisciplinary

Direct Vapor Growth of Perovskite CsPbBr3 Nanoplate Electroluminescence Devices

Xuelu Hu et al.

ACS NANO (2017)

Article Nanoscience & Nanotechnology

Solution-Processed Organic and Halide Perovskite Transistors on Hydrophobic Surfaces

Jeremy W. Ward et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Multidisciplinary

Ultrahigh Mobility in Solution-Processed Solid-State Electrolyte-Gated Transistors

Benjamin Nketia-Yawson et al.

ADVANCED MATERIALS (2017)

Article Physics, Applied

Intrinsic carrier transport properties of solution-processed organic-inorganic perovskite films

Toshinori Matsushima et al.

APPLIED PHYSICS EXPRESS (2017)

Article Chemistry, Multidisciplinary

Solution-Processed Organic-Inorganic Perovskite Field-Effect Transistors with High Hole Mobilities

Toshinori Matsushima et al.

ADVANCED MATERIALS (2016)

Article Chemistry, Multidisciplinary

Organometal Halide Perovskite Artificial Synapses

Wentao Xu et al.

ADVANCED MATERIALS (2016)

Article Multidisciplinary Sciences

Size-dependent phase transition in methylammonium lead iodide perovskite microplate crystals

Dehui Li et al.

NATURE COMMUNICATIONS (2016)

Article Multidisciplinary Sciences

Intrinsic and Extrinsic Charge Transport in CH3NH3PbI3 Perovskites Predicted from First-Principles

Tianqi Zhao et al.

SCIENTIFIC REPORTS (2016)

Article Chemistry, Multidisciplinary

A Highly Planar Fluorinated Benzothiadiazole-Based Conjugated Polymer for High-Performance Organic Thin-Film Transistors

Benjamin Nketia-Yawson et al.

ADVANCED MATERIALS (2015)

Article Chemistry, Physical

Temperature-Dependent Polarization in Field-Effect Transport and Photovoltaic Measurements of Methylammonium Lead Iodide

John G. Labram et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Article Chemistry, Physical

Phonon-Electron Scattering Limits Free Charge Mobility in Methylammonium Lead Iodide Perovskites

Melike Karakus et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Article Multidisciplinary Sciences

High-quality bulk hybrid perovskite single crystals within minutes by inverse temperature crystallization

Makhsud I. Saidaminov et al.

NATURE COMMUNICATIONS (2015)

Article Multidisciplinary Sciences

Lead iodide perovskite light-emitting field-effect transistor

Xin Yu Chin et al.

NATURE COMMUNICATIONS (2015)

Article Nanoscience & Nanotechnology

Performance and Stability of Aerosol-Jet-Printed Electrolyte-Gated Transistors Based on Poly(3-hexylthiophene)

Se Hyun Kim et al.

ACS APPLIED MATERIALS & INTERFACES (2013)

Article Chemistry, Multidisciplinary

Cut and Stick Rubbery Ion Gels as High Capacitance Gate Dielectrics

Keun Hyung Lee et al.

ADVANCED MATERIALS (2012)

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Article Chemistry, Physical

High-performance solution-processed polymer ferroelectric field-effect transistors

RCG Naber et al.

NATURE MATERIALS (2005)