☆ 4.7 Article

Microstructural Evolution and Mechanical Properties of Ti2AlNb/GH99 Superalloy Brazed Joints Using TiZrCuNi Amorphous Filler Alloy

AEROSPACE (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Study of anisotropy through microscopy, internal friction and electrical resistivity measurements of Ti-6Al-4V samples fabricated by selective laser melting

Adelaide Nespoli et al.

Summary: This paper investigates the microstructural anisotropy and internal stresses of Ti-6Al-4V samples fabricated by selective laser melting using novel characterization techniques. The study reveals the presence of columnar grains parallel to the building direction in the as-built and 850 degrees C annealed samples, while coarse grains characterize the 1,050 degrees C annealed specimens. Internal friction measurements indicate the presence of internal stress, and storage modulus analyses are sensitive to texture. Electrical resistivity is found to be dependent on grain orientation.

RAPID PROTOTYPING JOURNAL (2022)

Add to Collection

Article Engineering, Mechanical

Study on the influence of process parameters on high performance Ti-6Al-4V parts in laser powder bed fusion

Peng Wang et al.

Summary: The purpose of this paper is to improve the performance and quality of Ti-6Al-4V fabricated by laser powder bed fusion. The effects of process parameters on various properties of the parts were analyzed. The research results provide theoretical and data support for scientific researchers and engineers.

RAPID PROTOTYPING JOURNAL (2022)

Add to Collection

Article Engineering, Manufacturing

Sandwich structure printing of Ti-Ni-Ti by directed energy deposition

Aidin Farzaneh et al.

Summary: In this research, a sandwich structure consisting of Ti-6Al-4V and Nickel was printed using Laser Engineered Net Shaping (LENS). The objective was to propose a new method to produce sandwich structures with dissimilar materials and investigate the interfaces. The results provided insights into the production process and guidance for multi-material printing, with a focus on defect characterization and improvement of interface quality.

VIRTUAL AND PHYSICAL PROTOTYPING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of friction welded carbon steel (EN24) and nickel-based superalloy (IN718)

V. T. Gaikwad et al.

Summary: The study conducted continuous-drive rotary friction welding to join carbon steel and nickel-based superalloy, examining the microstructures, hardness profile, and tensile properties of the joint. The results showed that 100% joint efficiency can be achieved using this method, with significant changes in microstructures observed in the TMAZ and HAZ.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Formation mechanism of interfacial microstructures and mechanical properties of Ti2AlNb/Ni-based superalloy joints brazed with NiCrFeSiB filler metal

Haishui Ren et al.

Summary: The dissimilar brazing process and interfacial microstructure and mechanical properties of Ti2AlNb alloy and GH536 alloy joints were studied. Various reaction layers were formed near the Ti2AlNb base metal, resulting in high micro-hardness and weak link of the joint. Through isothermal solidification, a solid solution was formed, and different phases precipitated during the cooling process in the joint region.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Chemistry, Physical

Microstructure evolution and mechanical properties of high Nb-TiAl alloy/GH4169 joints brazed using CuTiZrNi amorphous filler alloy

Duo Dong et al.

Summary: A CuTiZrNi amorphous filler metal was fabricated and used for brazing high Nb-TiAl alloys and GH4169 superalloys. The joints brazed at different temperatures showed interfacial microstructures and mechanical properties. The joint exhibited maximum shear strength at 960 degrees Celsius due to intensified element diffusion and thickening of the interfacial reaction layer.

INTERMETALLICS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure evolution and mechanical properties of Ti2AlNb/TiAl brazed joint using newly-developed Ti-Ni-Nb-Zr filler alloy

Xinyu Ren et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructures and mechanical properties of Ti3Al/N based superalloy joints brazed with AuNi filler metal

H. S. Ren et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Optics

Dissimilar joining of TiAl alloy and Ni-based superalloy by laser welding technology using V/Cu composite interlayer

Xiaolong Cai et al.

OPTICS AND LASER TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Vacuum brazing of GH99 superalloy using graphene reinforced BNi-2 composite filler

Duo Liu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Brazing Ti-48Al-2Nb-2Cr Alloys with Cu-Based Amorphous Alloy Filler

Gang Wang et al.

APPLIED SCIENCES-BASEL (2018)

Add to Collection

Article Chemistry, Physical

Effect of microstructural parameters on the mechanical behavior of TiAlNb(Cr,Mo) alloys with γ plus σ microstructure at ambient temperature

Michael S. Kesler et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Chemistry, Physical

Transient liquid phase (TLP) bonding of Ti2AlNb alloy using Ti/Ni interlayer: Microstructure characterization and mechanical properties

X. Q. Cai et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Chemistry, Physical

Vacuum brazing of TiAl-based intermetallics with Ti-Zr-Cu-Ni-Co amorphous alloy as filler metal

Xiaoqiang Li et al.

INTERMETALLICS (2015)

Add to Collection

Article Chemistry, Physical

Microstructure evolution and mechanical properties of directionally-solidified TiAlNb alloy in different temperature gradients

Ruirun Chen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Article Chemistry, Physical

Effect of hydrogen on diffusion bonding of TiAl-based intermetallics and Ni-based superalloy using hydrogenated Ti6Al4V interlayer

Peng He et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of composition and heat treatment on the mechanical behavior of Ti-Cu alloys

Alexandra O. F. Hayama et al.

MATERIALS & DESIGN (2014)

Add to Collection

Article Chemistry, Physical

Effects of alloying elements in GH99 superalloy on microstructure evolution of reactive brazing TiAl/GH99 joints

Haixin Li et al.

INTERMETALLICS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and Transformation Behavior of in-situ Shape Memory Alloys by Selective Laser Melting Ti-Ni Mixed Powder

Baicheng Zhang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Growth of isothermally-solidified titanium joints using a multi-component Zr-Ti-Cu-Ni-Be amorphous alloy as a brazing filler

M. K. Lee et al.

MATERIALS CHARACTERIZATION (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Flow behavior and microstructures of superalloy 718 during high temperature deformation

Y. Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Add to Collection

Article Chemistry, Physical

On the constitution of the ternary system Al-Ni-Ti

Julius C. Schuster et al.

INTERMETALLICS (2007)

Add to Collection

Article Engineering, Aerospace

Nickel-based superalloys for advanced turbine engines: Chemistry, microstructure, and properties

TM Pollock et al.

JOURNAL OF PROPULSION AND POWER (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.