4.8 Article

Direct Writing of Silver Nanowire Patterns with Line Width down to 50 μm and Ultrahigh Conductivity

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

High-resolution and large-size stretchable electrodes based on patterned silver nanowires composites

Yong Lin et al.

Summary: This paper proposes a method for preparing large-size stretchable circuit boards with high-resolution electrodes using screen printing and vacuum filtration. The prepared electrodes have smooth edges and controllable conductivity, making them suitable for strain-insensitive stretchable circuits in wearable and health-related electronic applications.

NANO RESEARCH (2022)

Article Robotics

Variable Stiffness Electroadhesion and Compliant Electroadhesive Grippers

Rui Chen et al.

Summary: Soft adhesion technology is widely used in material handling applications where safe interactions with external environments are required. The VSEA pad, integrating electrostatic layer jamming and soft electroadhesion, demonstrates rapid response and significant stiffness change. This solution overcomes difficulties in lifting heavy objects and adhering to nonplanar materials.

SOFT ROBOTICS (2022)

Review Materials Science, Multidisciplinary

Recent Development and Applications of Advanced Materials via Direct Ink Writing

Alpha Chi Him Tsang et al.

Summary: Direct ink writing (DIW) is a low-cost and environmentally-friendly method for rapid design and construction of scalable 3D structures, utilizing optimized rheological properties and a wide range of nanomaterials to enhance performance. It has potential applications in medical, energy storage, and environmental treatment fields.

ADVANCED MATERIALS TECHNOLOGIES (2022)

Review Materials Science, Multidisciplinary

A review of silver nanowire-based composites for flexible electronic applications

Neha Sharma et al.

Summary: Silver nanowires have become a crucial component in flexible electronic devices due to their good electrical conductivity and bendability. Forming composites with other materials can further enhance their properties and functionality. These composites have diverse applications in various fields beyond just transparent conducting electrodes.

FLEXIBLE AND PRINTED ELECTRONICS (2022)

Article Nanoscience & Nanotechnology

Liquid Metal Microgels for Three-Dimensional Printing of Smart Electronic Clothes

Pengcheng Wu et al.

Summary: This study proposes a recyclable liquid-metal-microgel (LMM) ink composed of gallium-based liquid metal droplets encapsulated by alginate microgel shells, demonstrating excellent printability and adhesion to various substrates, with the ability to recover conductivity through activation. The activated LMM circuit shows superior electrical performance, including significant resistance response to strain and great durability to nonplanar forces.

ACS APPLIED MATERIALS & INTERFACES (2022)

Review Chemistry, Multidisciplinary

Direct Ink Writing: A 3D Printing Technology for Diverse Materials

M. A. S. R. Saadi et al.

Summary: Direct ink writing (DIW) is a versatile 3D printing technique that allows printing of a wide range of materials. This comprehensive review explores the process of DIW printing of complex 3D structures and discusses its diverse applications in various industries.

ADVANCED MATERIALS (2022)

Article Chemistry, Multidisciplinary

Realizing 17.5% Efficiency Flexible Organic Solar Cells via Atomic-Level Chemical Welding of Silver Nanowire Electrodes

Guang Zeng et al.

Summary: In this study, an ionic liquid (IL)-type reducing agent containing Cl- and a dihydroxyl group was used to control the reduction process of silver (Ag) in AgNW-based FTEs, achieving atomic-level contact between AgNWs and reduced Ag, thus improving the mechanical stability and optoelectronic properties of flexible FTEs.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2022)

Article Nanoscience & Nanotechnology

Human Skin-Inspired Electrospun Patterned Robust Strain-Insensitive Pressure Sensors and Wearable Flexible Light-Emitting Diodes

Loganathan Veeramuthu et al.

Summary: Wearable skin-inspired electronic skins have made remarkable progress in recent years, with promising features such as comfort, lightweight, and durability, leading to significant advancements in wearable sensors and optoelectronics.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Chemistry, Multidisciplinary

Room-Temperature Annealing-Free Gold Printing via Anion-Assisted Photochemical Deposition

Dong Wu et al.

Summary: This study introduces a new gold printing technique that allows for direct printing of highly conductive gold patterns without post-treatment. By controlling the types of ions in the precursor ink, the morphology and conductivity of the printed patterns can be adjusted. The printed gold electrodes demonstrate reliable performance in biomedical applications.

ADVANCED MATERIALS (2022)

Article Nanoscience & Nanotechnology

L-Citrulline-Modified Ti3C2TX MXene Nanosheets Embedded in Polyacrylamide/Sodium Alginate Hydrogels for Electromagnetic Interference Shielding

Bihua Xia et al.

Summary: A robust and mechanically composite hydrogel with efficient electromagnetic interference shielding performance was fabricated by incorporating L-citrulline-modified Ti3C2Tx MXene nanosheets into poly-acrylamide/sodium alginate hydrogels using ferrous chloride. The composite hydrogels showed optimal tensile strength and EMI shielding effectiveness, making them suitable for applications in the electronic skin field.

ACS APPLIED NANO MATERIALS (2022)

Article Materials Science, Multidisciplinary

Flexible and Transferable Silver Nanowire Liquid Crystal Polymer Film Obtained via Photo-Alignment Programming

Jingxin Sang et al.

Summary: A micro-domain photo-alignment technology is proposed to align silver nanowires (AgNWs) in a liquid crystal polymer (LCP) film, resulting in high order parameter. The aligned AgNWs can be easily transferred to flexible and functional substrates to improve the mechanical properties of LCP films.

ADVANCED OPTICAL MATERIALS (2022)

Article Chemistry, Multidisciplinary

Origin of Capillary-Force-Induced Welding in Ag Nanowires and Ag Nanowire/Carbon Nanotube Conductive Networks

Yangyang Wang et al.

Summary: This study presents a model for quantifying the capillary force between two nano-objects and investigates the capillary force between silver nanowires (AgNWs) and carbon nanotubes (CNTs) during water evaporation. The results demonstrate the significance of nano-object radius in capillary-force-induced welding.

LANGMUIR (2022)

Article Nanoscience & Nanotechnology

Highly Conductive and Compliant Silver Nanowire Nanocomposites by Direct Spray Deposition

Yong Lin et al.

Summary: This study reports a simple coating process to create Ag NW nanocomposites on various flexible/stretchable substrates, which exhibit excellent conductivity and high deformability. The patterned features of conductive nanocomposites can be conveniently accessed using shadow masks or selective laser ablation.

ACS APPLIED MATERIALS & INTERFACES (2022)

Review Chemistry, Physical

Self-assembly, alignment, and patterning of metal nanowires

Ying Chen et al.

Summary: Metal nanowires (MNWs) have become a new class of nanomaterials due to their unique advantages. Well-organized MNWs can enhance performance and create new functions and structures. This paper provides a comprehensive review of assembly strategies for MNWs and discusses their applications and challenges.

NANOSCALE HORIZONS (2022)

Article Engineering, Electrical & Electronic

Robust and Highly Conductive PEDOT:PSS:Ag Nanowires/Polyethyleneimine Multilayers Based on Ionic Layer-by-Layer Assembly for E-Textiles and 3D Electronics

Seung Hyun Kim et al.

Summary: This study demonstrates the production of robust and highly conductive multilayers through layer-by-layer assembly. The use of PEI results in the highest electrical conductivity and interfacial adhesion. Additionally, PEI provides a powerful interconnection for electrical circuit patterns with low contact resistance and robust mechanical durability.

ACS APPLIED ELECTRONIC MATERIALS (2022)

Review Chemistry, Multidisciplinary

3D Printed Flexible Strain Sensors: From Printing to Devices and Signals

Haodong Liu et al.

Summary: The revolutionary advancements in flexible electronics offer great potential for wearable devices and electronic skin, with flexible strain sensors serving as essential components in integrated electronic systems. 3D printing technology is preferred for manufacturing flexible strain sensors due to its cost-effectiveness, accuracy, and efficiency. Various printing methods, such as DLP, FDM, and DIW, are discussed in this study, along with the sensing mechanisms of the printed sensors and suggestions for future research directions.

ADVANCED MATERIALS (2021)

Review Materials Science, Multidisciplinary

Direct Ink Writing of Materials for Electronics-Related Applications: A Mini Review

Zhenzhong Hou et al.

Summary: The fabrication of electronics-related components via direct ink writing (DIW) has attracted much attention recently due to the more complicated structures, higher accuracy, improved efficiency, and enhanced performances. DIW technology allows materials to be directly printed on a variety of flat substrates, making it suitable for applications such as wearable devices and on-chip integrations. The combination of DIW and electronic devices will help to improve the quality of human life and promote the development of science and society.

FRONTIERS IN MATERIALS (2021)

Article Nanoscience & Nanotechnology

Atmospheric Pressure and Ambient Temperature Plasma Jet Sintering of Aerosol Jet Printed Silver Nanoparticles

Nazli Turan et al.

Summary: The passage discusses the application of atmospheric pressure nonthermal plasmas in sintering printed films, demonstrating the surface modifications achieved through nonthermal plasmas under ambient conditions. These results offer a new direction for future electronic device manufacturing, showcasing the potential of utilizing nonthermal plasmas for additive manufacturing on flexible and low-melting-point materials.

ACS APPLIED MATERIALS & INTERFACES (2021)

Review Nanoscience & Nanotechnology

3D Printing of Multilayered and Multimaterial Electronics: A Review

Guo Liang Goh et al.

Summary: 3D printing, also known as additive manufacturing, has been utilized in electronics manufacturing for the fabrication of various electronic components and devices. There is ongoing research on 3D printing of multilayered and multimaterial electronics, but a comprehensive review on the design and fabrication consideration is yet to be done.

ADVANCED ELECTRONIC MATERIALS (2021)

Article Materials Science, Multidisciplinary

Stretchable and Soft Electroadhesion Using Liquid-Metal Subsurface Microelectrodes

Sungjune Park et al.

Summary: Electroadhesion utilizes electric fields to modulate adhesion, with electrodes made from liquid metal allowing for excellent deformability and conductivity on soft and stretchable substrates. Stretching improves electroadhesion performance, while using liquid-filled microchannels can help maintain contact during peeling.

ADVANCED MATERIALS TECHNOLOGIES (2021)

Article Chemistry, Multidisciplinary

Direct Writing Micropatterns with a Resolution up to 1 μm

Kejie Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Nanoscience & Nanotechnology

Work Function Engineering of Electrohydrodynamic-Jet-Printed PEDOT:PSS Electrodes for High-Performance Printed Electronics

Benzheng Lyu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Multidisciplinary Sciences

3D printing of conducting polymers

Hyunwoo Yuk et al.

NATURE COMMUNICATIONS (2020)

Review Engineering, Electrical & Electronic

Silver nanowire networks with preparations and applications: a review

Dongchen Tan et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Article Computer Science, Cybernetics

Electrowetting: A Consideration in Electroadhesion

Xinyi Li et al.

IEEE TRANSACTIONS ON HAPTICS (2020)

Article Chemistry, Physical

Direct ink writing advances in multi-material structures for a sustainable future

Victoria G. Rocha et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Engineering, Electrical & Electronic

Lifting-Force Maximization of a Micropatterned Electroadhesive Device Comparable to the Human-Finger Grip

Kisuk Choi et al.

ACS APPLIED ELECTRONIC MATERIALS (2020)

Review Materials Science, Multidisciplinary

Printing Conductive Nanomaterials for Flexible and Stretchable Electronics: A Review of Materials, Processes, and Applications

Qijin Huang et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

Article Materials Science, Multidisciplinary

Ultrastretchable Hybrid Electrodes of Silver Nanowires and Multiwalled Carbon Nanotubes Realized by Capillary- Force-Induced Welding

Yangyang Wang et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

Article Chemistry, Multidisciplinary

Direct-Ink-Write 3D Printing of Hydrogels into Biomimetic Soft Robots

Yin Cheng et al.

ACS NANO (2019)

Article Materials Science, Multidisciplinary

All-Fabric Wearable Electroadhesive Clutch

Vivek Ramachandran et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

Article Materials Science, Multidisciplinary

Stretchable Suction Cup with Electroadhesion

Yuto Okuno et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

Article Nanoscience & Nanotechnology

Strongly Adhesive Silver Nanowire Ink Makes Delamination-Free Transparent Conductive Films Possible

Guixin Wang et al.

ACS APPLIED NANO MATERIALS (2019)

Article Chemistry, Multidisciplinary

Silver nanowire inks for direct-write electronic tattoo applications

Nicholas X. Williams et al.

NANOSCALE (2019)

Review Chemistry, Multidisciplinary

Conductive nanomaterials for 2D and 3D printed flexible electronics

Alexander Kamyshny et al.

CHEMICAL SOCIETY REVIEWS (2019)

Review Engineering, Electrical & Electronic

Recent Progress of Direct Ink Writing of Electronic Components for Advanced Wearable Devices

Yubai Zhang et al.

ACS APPLIED ELECTRONIC MATERIALS (2019)

Article Materials Science, Multidisciplinary

Direct Printing for Additive Patterning of Silver Nanowires for Stretchable Sensor and Display Applications

Le Cai et al.

ADVANCED MATERIALS TECHNOLOGIES (2018)

Article Chemistry, Multidisciplinary

Protein-Based Electronic Skin Akin to Biological Tissues

Minsik Jo et al.

ACS NANO (2018)

Review Chemistry, Multidisciplinary

Chemical formation of soft metal electrodes for flexible and wearable electronics

Dongrui Wang et al.

CHEMICAL SOCIETY REVIEWS (2018)

Article Chemistry, Multidisciplinary

Electrohydrodynamic printing of silver nanowires for flexible and stretchable electronics

Zheng Cui et al.

NANOSCALE (2018)

Article Instruments & Instrumentation

Soft pneumatic grippers embedded with stretchable electroadhesion

J. Guo et al.

SMART MATERIALS AND STRUCTURES (2018)

Review Chemistry, Multidisciplinary

Materials and Structures toward Soft Electronics

Chunfeng Wang et al.

ADVANCED MATERIALS (2018)

Review Polymer Science

Junction Welding Techniques for Metal Nanowire Network Electrodes

Hyungseok Kang et al.

MACROMOLECULAR RESEARCH (2018)

Article Robotics

Inverted and vertical climbing of a quadrupedal microrobot using electroadhesion

Sebastien D. de Rivaz et al.

SCIENCE ROBOTICS (2018)

Article Chemistry, Multidisciplinary

A New 3D Printing Strategy by Harnessing Deformation, Instability, and Fracture of Viscoelastic Inks

Hyunwoo Yuk et al.

ADVANCED MATERIALS (2018)

Article Nanoscience & Nanotechnology

Chemical sintering of direct-written silver nanowire flexible electrodes under room temperature

Zhuang Hui et al.

NANOTECHNOLOGY (2017)

Article Multidisciplinary Sciences

Conductive Cellulose Composites with Low Percolation Threshold for 3D Printed Electronics

Jae Sung Park et al.

SCIENTIFIC REPORTS (2017)

Article Nanoscience & Nanotechnology

Halide Welding for Silver Nanowire Network Electrode

Hyungseok Kang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Nanoscience & Nanotechnology

Fully Packaged Carbon Nanotube Supercapacitors by Direct Ink Writing on Flexible Substrates

Bolin Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Review Materials Science, Multidisciplinary

Printable stretchable interconnects

Wenting Dang et al.

FLEXIBLE AND PRINTED ELECTRONICS (2017)

Article Chemistry, Multidisciplinary

Versatile Soft Grippers with Intrinsic Electroadhesion Based on Multifunctional Polymer Actuators

Jun Shintake et al.

ADVANCED MATERIALS (2016)

Article Chemistry, Multidisciplinary

Facile Synthesis of Sub-20 nm Silver Nanowires through a Bromide-Mediated Polyol Method

Robson Rosa da Silva et al.

ACS NANO (2016)

Review Multidisciplinary Sciences

Printing soft matter in three dimensions

Ryan L. Truby et al.

NATURE (2016)

Review Chemistry, Multidisciplinary

Nanomaterial-Enabled Stretchable Conductors: Strategies, Materials and Devices

Shanshan Yao et al.

ADVANCED MATERIALS (2015)

Article Nanoscience & Nanotechnology

Direct Writing on Paper of Foldable Capacitive Touch Pads with Silver Nanowire Inks

Ruo-Zhou Li et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Article Chemistry, Multidisciplinary

3D-Printing of Lightweight Cellular Composites

Brett G. Compton et al.

ADVANCED MATERIALS (2014)

Article Chemistry, Multidisciplinary

Transparent conductive grids via direct writing of silver nanoparticle inks

Bok Yeop Ahn et al.

NANOSCALE (2011)

Review Multidisciplinary Sciences

Materials and Mechanics for Stretchable Electronics

John A. Rogers et al.

SCIENCE (2010)