Related references
Note: Only part of the references are listed.Eco-friendly particleboard production from coconut waste valorization
Maila Janaina Coelho de Souza et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2023)
Residual sugarcane bagasse conversion in India: current status, technologies, and policies
Shireen Quereshi et al.
BIOMASS CONVERSION AND BIOREFINERY (2022)
New formaldehyde-free adhesives for wood manufacturing: In vitro evaluation of potential toxicity of fine dust collected during wood sawing using a new experimental model to simulate occupational inhalation exposure
Delia Cavallo et al.
TOXICOLOGY (2022)
Substitution of urea-formaldehyde by renewable phenolic compound for environmentally appropriate production of particleboards
Ana Carolina Correa Furtini et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)
Characterization of particleboards of African mahogany sawdust made with tannic powders of Bridelia and African locust bean pods
Soviwadan Drovou et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2022)
Feasibility of incorporating thermally treated lignocellulosic waste in particleboard composites
Fabricio Gomes Goncalves et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2022)
Developing 3-layer tea oil camellia (Camellia oleifera Abel.) shells-based particleboard with systematic study on particle geometry and distribution
Kamran Choupani Chaydarreh et al.
INDUSTRIAL CROPS AND PRODUCTS (2022)
Grape Canes (Vitis vinifera L.) Applications on Packaging and Particleboard Industry: New Bioadhesive Based on Grape Extracts and Citric Acid
Jorge Santos et al.
POLYMERS (2022)
Properties of sorghum (Sorghum bicolor) biomass particleboard at different maleic acid content and particle size as potential materials for table tennis blade
Jajang Sutiawan et al.
BIOMASS CONVERSION AND BIOREFINERY (2022)
Conventional low-density particleboards produced from Mauritia flexuosa and Eucalyptus spp. wood
Douglas Lamounier Faria et al.
CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2022)
Alternative Materials from Agro-Industry for Wood Panel Manufacturing-A Review
Nicolas Neitzel et al.
MATERIALS (2022)
Influence of mixing waste tobacco stalks and paper mulberry wood chips on the physico-mechanical properties, formaldehyde emission, and termite resistance of particleboard
Juanito P. Jimenez et al.
INDUSTRIAL CROPS AND PRODUCTS (2022)
Renewable Tannin-Based Adhesive from Quebracho Extract and Furfural for Particleboards
Emanuele Cesprini et al.
FORESTS (2022)
Relationship between internal bond properties and x-ray densitometry of wood plastic composite
Yonny Martinez Lopez et al.
COMPOSITES PART B-ENGINEERING (2021)
Impact of condensation degree of melamine-formaldehyde resins on their curing behavior and on the final properties of high-pressure laminates
J. Santos et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2021)
Alternative lignocellulosic raw materials in particleboard production: A review
Marta Pedzik et al.
INDUSTRIAL CROPS AND PRODUCTS (2021)
Development of bio-based cornstarch-Mimosa tannin-sugar adhesive for interior particleboard production
Salise Oktay et al.
INDUSTRIAL CROPS AND PRODUCTS (2021)
Difficulty of internal bond prediction of particleboard using the density profile
Hideaki Korai
JOURNAL OF WOOD SCIENCE (2021)
Layer-by-Layer Assembly of Polystyrene/Ag for a Highly Reproducible SERS Substrate and Its Use for the Detection of Food Contaminants
Sihan Zhang et al.
POLYMERS (2021)
Investigation of agro-industrial lignocellulosic wastes in fabrication of particleboard for construction use
Rhagnya Sharon Ferreira Martins et al.
JOURNAL OF BUILDING ENGINEERING (2021)
Particleboards produced with different proportions of Hevea brasiliensis: Residual wood valorization in higher value added products
Douglas Lamounier Faria et al.
CIENCIA E AGROTECNOLOGIA (2021)
A study of the influence of press parameters on particleboards' performance
C. Goncalves et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2020)
Wood Composites and Their Polymer Binders
Antonio Pizzi et al.
POLYMERS (2020)
Production of particleboard using olive stone waste for interior design
Eman Farag et al.
JOURNAL OF BUILDING ENGINEERING (2020)
Potential destination of Brazilian cocoa agro-industrial wastes for production of materials with high added value
Maria Cecillia Ramos de Araujo Veloso et al.
WASTE MANAGEMENT (2020)
Low-density particleboard properties produced with jupati particles and eucalyptus wood
Maria Cecillia Ramos de Araujo Veloso et al.
REVISTA BRASILEIRA DE CIENCIAS AGRARIAS-AGRARIA (2020)
Economic feasibility analysis of commercial formaldehyde-based adhesives
Minliang Yang et al.
SN APPLIED SCIENCES (2020)
Properties of particleboards manufactured from bamboo (Dendrocalamus asper)
Flavia Maria Silva Brito et al.
REVISTA BRASILEIRA DE CIENCIAS AGRARIAS-AGRARIA (2020)
Effect of Filler Content of Chemically Treated Short Bagasse Fiber-Reinforced Cardanol Polymer Composites
A. Balaji et al.
JOURNAL OF NATURAL FIBERS (2019)
Effect of the initial F/U molar ratio in urea-formaldehyde resins synthesis and its influence on the performance of medium density fiberboard bonded with them
Mohsen Khonakdar Dazmiri et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)
Does the Addition of Cotton Wastes Affect the Properties of Particleboards?
Mario Vanoli Scatolino et al.
FLORESTA E AMBIENTE (2019)
Use of soybean hulls for the production of conventional panels of low density agglomerates
Ingrid Luz Guimaraes et al.
REVISTA BRASILEIRA DE CIENCIAS AGRARIAS-AGRARIA (2019)
Coconut shell particles reinforced cardanol-formaldehyde resole resin biocomposites: Effect of treatment on thermal properties
R. Udhayasankar et al.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2018)
Energy efficient room temperature synthesis of cardanol-based novolac resin using acoustic cavitation
Nilesh L. Jadhav et al.
ULTRASONICS SONOCHEMISTRY (2018)
Biobased Aromatic-Aliphatic Polyols from Cardanol by Thermal Thiol-Ene Reaction
Maha L. Shrestha et al.
JOURNAL OF RENEWABLE MATERIALS (2018)
X-RAY DENSITOMETRY IN THE EVALUATION OF DENSITY IN PARTICLEBOARD PANEL
Fabricio Gomes Goncalves et al.
CIENCIA FLORESTAL (2018)
Utilization of construction and demolition waste for particleboard production
Rafael da Rosa Azambuja et al.
JOURNAL OF BUILDING ENGINEERING (2018)
Facilitating active learning within green chemistry
Louise Summerton et al.
CURRENT OPINION IN GREEN AND SUSTAINABLE CHEMISTRY (2018)
Cardanol: A promising building block for biobased polymers and additives
Sylvain Caillol
CURRENT OPINION IN GREEN AND SUSTAINABLE CHEMISTRY (2018)
Mechanical behavior of short bagasse fiber reinforced cardanol-formaldehyde composites
A. Balaji et al.
FIBERS AND POLYMERS (2017)
Antifungal activities of wood extractives
Nicolas Valette et al.
FUNGAL BIOLOGY REVIEWS (2017)
Eucalyptus wood and coffee parchment for particleboard production: Physical and mechanical properties
Mario Vanoli Scatolino et al.
CIENCIA E AGROTECNOLOGIA (2017)
Reduction of Formaldehyde Emission from Particleboard by Phenolated Kraft Lignin
Hamed Younesi-Kordkheili et al.
JOURNAL OF ADHESION (2016)
Polysaccharides and lignin from oak wood used in cooperage: Composition, interest, assays: A review
Alexandra Le Floch et al.
CARBOHYDRATE RESEARCH (2015)
Mussel-inspired polydopamine coating as a versatile platform for synthesizing polystyrene/Ag nanocomposite particles with enhanced antibacterial activities
Ying Cong et al.
JOURNAL OF MATERIALS CHEMISTRY B (2014)
Synthesis and Characterization of Molecularly Imprinted Polymer Membrane for the Removal of 2,4-Dinitrophenol
Nor Azah Yusof et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2013)
Accelerated Artificial Aging of Particleboards from Residues of CCB Treated Pinus sp and Castor Oil Resin
Marilia da Silva Bertolini et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2013)
Thermal decomposition of wood: Kinetics and degradation mechanisms
Matheus Poletto et al.
BIORESOURCE TECHNOLOGY (2012)
Polyols and Rigid Polyurethane Foams from Cashew Nut Shell Liquid
Mihail Ionescu et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2012)
Biocomposites reinforced with natural fibers: 2000-2010
Omar Faruk et al.
PROGRESS IN POLYMER SCIENCE (2012)
Heating values of wood pellets from different species
C. Telmo et al.
BIOMASS & BIOENERGY (2011)
A review on the tensile properties of natural fiber reinforced polymer composites
H. Ku et al.
COMPOSITES PART B-ENGINEERING (2011)
Cardanol-formaldehyde thermoset composites reinforced with buriti fibers: Preparation and characterization
Reginaldo da Silva Santos et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Nonisothermal Degradation of Wood Using Thermogravimetric Measurements
Otavio Bianchi et al.
POLIMEROS-CIENCIA E TECNOLOGIA (2010)
Recent developments in eco-efficient bio-based adhesives for wood bonding: opportunities and issues
A. Pizzi
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2006)
Differential scanning calorimetry characterization of urea-formaldehyde resin curing behavior as affected by less desirable wood material and catalyst content
C Xing et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2005)
Characterization of chars from pyrolysis of lignin
RK Sharma et al.
FUEL (2004)
Characterisation of tannin resin blends for particle board applications
ETN Bisanda et al.
CEMENT & CONCRETE COMPOSITES (2003)
Relationships between lignin contents and heating values of biomass
A Demirbas
ENERGY CONVERSION AND MANAGEMENT (2001)
Cure characteristics of alkali catalysed cashew nut shell liquid-formaldehyde resin
LY Mwaikambo et al.
JOURNAL OF MATERIALS SCIENCE (2001)