☆ 4.7 Review

Thermally responsive polymers for overcoming thermal runaway in high-safety electrochemical storage devices

MATERIALS CHEMISTRY FRONTIERS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Insight into thermal regulation of supercapacitors via surface-engineered phase change microcapsules

Yan Hu et al.

Summary: Constructing an efficient thermal management system using phase change microcapsules (MEPCMs) is important for resolving the thermal runaway issue in energy storage devices. Conventional MEPCMs, however, hinder the electrochemical performance and are difficult to uniformly fix in the electrodes. To address these challenges, a novel electrochemically active double-shell phase change microcapsule was designed by incorporating polypyrrole onto the dense amine resin shell of the inert MEPCM. The active MEPCMs@PPy were uniformly immobilized on the electrode material's surface using reduced graphene oxide, resulting in a stable and efficient operation of the flexible supercapacitor.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Deciphering the Electrochemical Behaviors of the Electrode-Electrolyte Coupling toward Advanced Electrochemical Energy Storage Device

Zhenheng Sun et al.

Summary: This study establishes an electrochemical kinetic evolution model of redox electrolyte in the electrode, revealing that the redox reaction of electrolyte originates from charge transfer between ions in the electric double layer. By adjusting the electrolyte concentration, the electrochemical performance is optimized, and the decline of coulombic efficiency is systematically analyzed.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Phase change material microcapsules with melamine resin shell via cellulose nanocrystal stabilized Pickering emulsion in-situ polymerization

Zhe Zhang et al.

Summary: PCM microcapsules with MF shell were successfully prepared with CNCs as emulsifiers, achieving stable encapsulation of PCMs and enhanced heat conduction efficiency.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Composite phase change material with room-temperature-flexibility for battery thermal management

Weifeng Wu et al.

Summary: This study successfully prepared a flexible composite phase change material with well-retained flexibility in a wide temperature range by carefully selecting a specific copolyester thermoplastic elastomer. The material demonstrated outstanding applicability and cooling performance in various battery cells and modules, significantly lowering the maximum temperature and improving thermal management efficiency.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Synergistic effects of core@double-shell structured magnesium hydroxide microcapsules on flame retardancy and smoke suppression in flexible poly(vinyl chloride)

Jingshui Xu et al.

Summary: A core@double-shell structured encapsulated flame retardant was prepared for poly(vinyl chloride) (PVC) to improve its flame retardancy and smoke suppression effects. The results showed that the composite of PVC with 10 wt% MH@DOPO@MF had the best flame retardancy and smoke suppression performance.

RSC ADVANCES (2022)

Add to Collection

Article Chemistry, Applied

A new flame-retardant polymer electrolyte with enhanced Li-ion conductivity for safe lithium-sulfur batteries

Hongping Li et al.

Summary: Flame-retardant polymer electrolytes (FRSPEs) have been successfully developed by introducing a novel liquid monomer with flame-retardant composition, which effectively solves the poor lithium ion conductivity issue of traditional FRSPEs. With outstanding flame-retardant property and favorable lithium ion conductivity, the prepared FRSPE shows excellent electrochemical performance.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Bioinspired Thermal Runaway Retardant Capsules for Improved Safety and Electrochemical Performance in Lithium-Ion Batteries

Zhenhai Gao et al.

Summary: The development of electric vehicles relies on addressing battery fire hazards, and encapsulating thermal runaway retardants (TRRs) is a promising approach to improve safety without compromising performance, showing potential for practical application.

ADVANCED SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Fundamental Insights into Battery Thermal Management and Safety

Ryan S. Longchamps et al.

Summary: This article presents a new perspective on battery thermal management and safety for electric vehicles, emphasizing the importance of high-temperature battery operation and heat-resistant materials in future research and development. The application of heat-resistant batteries can enhance battery safety and calendar life, while simplifying thermal management systems.

ACS ENERGY LETTERS (2022)

Add to Collection

Review Energy & Fuels

Recent research progress on phase change materials for thermal management of lithium-ion batteries

Maoyong Zhi et al.

Summary: With the shift towards new energy replacing traditional fossil fuels, PCM-based BTM has emerged as a crucial thermal management solution for lithium-ion batteries. PCM utilizes latent heat to enhance thermal management efficiency and properties, making it a better fit for battery thermal management systems.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Engineering, Environmental

Temperature-responsive coating endowing LiNi0.8Co0.1Mn0.1O2 cathode materials with improved cycling stability and overheating self-protection function

Tengfei Li et al.

Summary: This study reports a temperature-sensitive reversible switching material as a coating, which successfully improves the cycling stability and overheating selfprotection function of NCM811 cathode materials, providing a new opportunity for the commercial application of NCM811.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

A safer organic cathode material with overheating self-protection function for lithium batteries

Tengfei Li et al.

Summary: This study introduces a novel thermal protection strategy for safer lithium batteries, utilizing the intrinsic overheating protection function of cathode materials without introducing extra thermal protection elements.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Thermal-triggered fire-extinguishing separators by phase change materials for high-safety lithium-ion batteries

Zhifang Liu et al.

Summary: This study reports a novel separator design that can absorb thermal energy within the battery and improve fire safety. The separator is made of a thermo-responsive composite material, featuring a phase-change material (PCM) and a flame retardant. The PCM can store heat and control the release of the flame retardant. Upon thermal runaway, the PCM undergoes solid-liquid transition to release the flame retardant, effectively reducing the safety risks.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

In-situ generation of fluorinated polycarbonate copolymer solid electrolytes for high-voltage Li-metal batteries

Yong Wang et al.

Summary: Polymer-based solid-state lithium metal batteries are considered ideal for portable and flexible devices due to increasing energy demand. This study introduces a fluorine containing polycarbonate-based electrolyte to expand the electrochemical window and improve ionic conductivity, allowing for the use of high-energy-density cathode materials. The proposed polycarbonate electrolyte shows promise for further application in high-voltage cathode materials for lithium metal batteries (LMBs).

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Safety issue on PCM-based battery thermal management: Material thermal stability and system hazard mitigation

Jingwen Weng et al.

Summary: Although lithium-ion batteries are widely used, the thermal safety issues remain a concern. This article focuses on phase-change-material (PCM)-based battery thermal management systems (BTMs) and highlights the importance of meeting prerequisites for heat dissipation and thermal hazard mitigation. It compares the thermo-physical properties of modified PCMs and the structural design of structure-enhanced PCM-based BTMs. Future research directions for system resilience are proposed.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Developing Thermoregulatory Hydrogel Electrolyte to Overcome Thermal Runaway in Zinc-Ion Batteries

Yuan Meng et al.

Summary: A self-adaptive thermoregulatory hydrogel electrolyte (TRHE) has been developed to address the thermal issues associated with zinc-ion batteries (ZIBs) under harsh conditions, improving their electrochemical performance.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Critical perspective on smart thermallyself-protective lithium batteries br

Jinqiu Zhou et al.

Summary: This paper reviews the research progress of internal intelligent thermal protection methods to improve the thermal safety of lithium batteries. Strategies such as phase separation/transition of electrolytes and thermoregulating separators have been developed to alleviate thermal runway. However, methods to switch off cell reactions are also needed to avoid heat-generation and thermal runaway.

MATERIALS TODAY (2022)

Add to Collection

Article Chemistry, Physical

Solvation Structure-Tunable Phase Change Electrolyte for Stable Lithium Metal Batteries

Hongfei Xu et al.

Summary: The study presents a phase change electrolyte that can regulate the solvation structure by changing the physical state of the electrolyte. The electrolyte shows high ionic conductivity and electrochemical stability, effectively suppressing lithium dendrite growth and dissolution of active anodic materials, leading to improved electrochemical performance of lithium metal batteries.

ACS ENERGY LETTERS (2022)

Add to Collection

Review Chemistry, Physical

Carbon nanomaterials and their composites for supercapacitors

Mingzhu Zhong et al.

Summary: This review introduces the research progress of supercapacitors, focusing on the application of pure carbon nanomaterials and multistage carbon nanostructures as electrodes. The synergistic effect of composites can enhance the performance of supercapacitors, while increasing the components to form ternary composites is a simple and effective method.

CARBON ENERGY (2022)

Add to Collection

Article Electrochemistry

A polymer electrolyte with a thermally induced interfacial ion-blocking function enables safety-enhanced lithium metal batteries

Huanrui Zhang et al.

Summary: Lithium metal batteries are considered one of the most promising energy storage systems due to their high capacity and low potential. However, safety issues caused by lithium dendrite growth and pulverization have limited their practical application. To address this, researchers have developed an in situ polymer electrolyte with thermally induced interfacial ion-blocking ability, resulting in improved safety and cyclability of lithium metal batteries.

ESCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Chemo-thermal surface dedoping for high-performance tin perovskite solar cells

Jianheng Zhou et al.

Summary: In this study, a surface-dedoping approach is used to enhance the efficiency of tin perovskite solar cells. By optimizing the film morphology, negative effects are avoided. The method also improves carrier lifetime and reduces trap density, resulting in higher device efficiency. Furthermore, the tin perovskite solar cells exhibit stability even after long-term storage.

MATTER (2022)

Add to Collection

Article Chemistry, Physical

Electrospinning-Based Strategies for Battery Materials

Xiaoyan Li et al.

Summary: Electrospinning is a popular technique for preparing 1D nanomaterials that can be assembled into 2D/3D structures. When combined with other material processing techniques, it allows for powerful synthesis strategies to tailor the structural and compositional features of energy storage materials. The use of electrospun frameworks in enhancing electronic conductivity and structural integrity of electrodes shows promise for future applications in energy storage.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Review Electrochemistry

Strategies to Solve Lithium Battery Thermal Runaway: From Mechanism to Modification

Lingchen Kong et al.

Summary: As global energy policy shifts towards renewable energy, lithium batteries have become a focus due to their advantages over other batteries. Safety promotion is urgent as energy density increases. Various strategies such as design and modification of battery components are discussed in this review to suppress thermal runaway and improve safety.

ELECTROCHEMICAL ENERGY REVIEWS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Unraveling the Role of Neutral Units for Single-Ion Conducting Polymer Electrolytes

Sheng Zhao et al.

Summary: Single-ion conducting polymer electrolytes (SICPEs) are considered an advanced electrolyte system with high energy efficiency for battery applications, but their relatively low ionic conductivity remains a major bottleneck. Polyethylene oxide (PEO) is recognized as a benchmark for solid polymer electrolytes due to its high salt solubility and reasonable ionic conductivity.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Copper Sulfide Nanodisk-Doped Solid-Solid Phase Change Materials for Full Spectrum Solar-Thermal Energy Harvesting and Storage

Feng Xiong et al.

Summary: Novel shape-stable composite PCMs based on CuS nanoparticles and PU matrix have been developed, exhibiting outstanding thermophysical properties for high-efficiency solar-thermal energy storage. The composite PCM shows excellent shape stability, thermal stability, and thermal reliability, making it an imperative candidate for real-world applications.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

An Air-Stable and Li-Metal-Compatible Glass-Ceramic Electrolyte enabling High-Performance All-Solid-State Li Metal Batteries

Feipeng Zhao et al.

Summary: The study synthesized a new glass-ceramic solid-state electrolyte with high ionic conductivity and excellent air-stability, which can be used for the preparation of high-performance all-solid-state Li metal batteries.

ADVANCED MATERIALS (2021)

Add to Collection

Article Thermodynamics

Thermal management of Lithium-ion battery pack through the application of flexible form-stable composite phase change materials

Qiqiu Huang et al.

Summary: The study successfully prepared a novel flexible composite SBS@PA/EG for battery thermal management systems, effectively controlling the maximum temperature and temperature difference of the battery module.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Thermoregulating Separators Based on Phase-Change Materials for Safe Lithium-Ion Batteries

Zhifang Liu et al.

Summary: This study presents a novel design for a thermoregulating separator using a phase-change material (PCM) that can effectively mitigate the issue of overheating in lithium-ion batteries (LIBs).

ADVANCED MATERIALS (2021)

Add to Collection

Article Polymer Science

RAFT-Polymerized N-Cyanomethylacrylamide-Based (Co)polymers Exhibiting Tunable UCST Behavior in Water

Nicolas Audureau et al.

Summary: A new family of UCST-thermoresponsive polymers based on N-cyanomethylacrylamide (CMAm) were synthesized and demonstrated to have well-controlled phase transitions and molar mass dependent transition temperatures. By copolymerizing with acrylamide or acrylic acid, the transition temperature can be modulated over a wide range, resulting in thermoresponsive and pH responsive copolymers that show sharp and reversible UCST-type transitions close to physiological temperature, making them promising candidates for biomedical applications.

MACROMOLECULAR RAPID COMMUNICATIONS (2021)

Add to Collection

Article Multidisciplinary Sciences

Thermal-expansion offset for high-performance fuel cell cathodes

Yuan Zhang et al.

Summary: This study demonstrates an approach to achieving full thermo-mechanical compatibility between the cathode and other cell components for solid oxide fuel cells. By introducing a thermal-expansion offset and using reactive sintering to form a composite electrode, the research shows high activity and excellent stability of the electrode. The introduction of reactive negative-thermal-expansion components may provide a general strategy for developing fully compatible and highly active electrodes for SOFCs.

NATURE (2021)

Add to Collection

Article Engineering, Industrial

An integrated safety and security analysis for cyber-physical harm scenarios

Nelson H. Carreras Guzman et al.

Summary: Increasing digitalization and autonomous solutions promise to enhance performance and reliability in physical systems, but also bring new vulnerabilities and risks that challenge traditional safety analysis. Cyber security threats are becoming key factors in complex accident scenarios in cyber-physical systems, emphasizing the need for integrated safety and security analysis.

SAFETY SCIENCE (2021)

Add to Collection

Article Multidisciplinary Sciences

Smart composite nanofiber mats with thermal management functionality

Nuray Kizildag

Summary: This study successfully produced PAN nanofibers with thermal management functionality by adding PCMs to the electrospinning solution. The tunability of the thermoregulation properties of the nanofibers was achieved by adding PCMs with different melting points simultaneously. The addition of PCMs imparted hydrophobicity to the nanofibers, showing potential for wider temperature range thermoregulation ability.

SCIENTIFIC REPORTS (2021)

Add to Collection

Article Polymer Science

Cross-linking induced thermo-responsive self-healing hydrogel with gel-sol-gel transition constructed on dynamic covalent bond

Jiafu Shen et al.

Summary: This study focused on the synthesis of thermo-responsive hydrogels with ketone groups, showing excellent mechanical properties and chemical stabilities. The hydrogel demonstrated reversible gel-sol transitions under different conditions and exhibited wonderful biocompatibility, extending its potential applications as biomaterials.

JOURNAL OF POLYMER RESEARCH (2021)

Add to Collection

Article Chemistry, Physical

Recent advances in lithium-ion battery separators with reversible/irreversible thermal shutdown capability

Jiayi Li et al.

Summary: Advancements in separator technology for lithium-ion batteries have been developed to ensure safety, service life, and user experience. The focus is on incorporating thermal shutdown functions to prevent safety issues caused by elevated temperatures. Growing demand for recycling and sustainability has led to the development of functional separators with irreversible or reversible thermal shutdown ability for future utility and manufacture.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Rapidly Thermoreversible and Biodegradable Polypeptide Hydrogels with Sol-Gel-Sol Transition Dependent on Subtle Manipulation of Side Groups

Dan Zhao et al.

Summary: Thermoreversible hydrogels composed of PEG/P(EEO(2)LG) block copolymers exhibit rapid gel-to-sol transition rates within seconds, making them suitable for biomedical applications. These innovative hydrogels also show better biocompatibility and biodegradability compared to traditional hydrogels.

BIOMACROMOLECULES (2021)

Add to Collection

Review Engineering, Environmental

Preparation and application of three-dimensional filler network towards organic phase change materials with high performance and multi-functions

Fei Xue et al.

Summary: Organic phase change materials (OPCMs) are energy storage materials with excellent properties, but their application is limited by low thermal conductivity and unstable morphology in the melting state. Pre-constructing a 3D filler network is an effective method to modify OPCMs, improving thermal conductivity, phase change enthalpy, and encapsulation ability. Various methods have been developed to prepare 3D filler networks for composite PCMs, enhancing performance and enabling large-scale production.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Synergistic effects in cross-linked blends of ion-conducting PEO-/PPO-based unsaturated polyesters

Pia B. Sassmann et al.

Summary: The ion-conductive unsaturated polyesters were synthesized from poly(ethylene oxide) or poly(propylene oxide) and maleic anhydride, doped with LiClO4 and cross-linked with styrene. The resistivity of the polyesters was found to be influenced by the ratios of oxygen to lithium ions and the molecular weights of the polymers. Blending short-chain PPO and long-chain PEO polyesters in a 1:1 ratio resulted in a network with significantly lower resistivity compared to pure PPO and PEO materials.

IONICS (2021)

Add to Collection

Article Polymer Science

Cross-linked Single-Ion Solid Polymer Electrolytes with Alternately Distributed Lithium Sources and Ion-Conducting Segments for Lithium Metal Batteries

Shaoshan Chen et al.

Summary: Solid polymer electrolytes with improved energy densities and operational safety have replaced liquid electrolytes in next-generation Li metal batteries. The introduced single-ion SPE showed enhanced ionic conductivity and mechanical strength, making it a potential candidate for safe LMB applications.

MACROMOLECULES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Fully Organic Bulk Polymer with Metallic Thermal Conductivity and Tunable Thermal Pathways

Yongzheng Zhang et al.

Summary: This study demonstrates the incorporation of highly aligned ultrahigh molecular weight polyethylene microfibers into a silicone matrix to create an organic bulk polymer composite with continuous vertical phonon pathways. The resulting material exhibits a perpendicular thermal conductivity of 38.27 W m(-1) K-1, equivalent to metals and significantly higher than other bulk organic polymers. By utilizing the mechanical flexibility of the microfibers, this processing method allows for tailored heat transfer pathways in a macroscopic 3D space, opening up opportunities for efficient thermal management in high-performance devices.

ADVANCED SCIENCE (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Developments of Advanced Electrospinning Techniques: A Critical Review

Ya Li et al.

Summary: Electrospinning, a low-cost and straightforward method, has attracted great attention for its functional nanofibrous materials that can be widely used in various fields. This paper comprehensively reviews the latest advances in developing this unique technique and provides a future vision for challenges and perspectives in the field.

ADVANCED MATERIALS TECHNOLOGIES (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Engineering the Thermal Conductivity of Functional Phase-Change Materials for Heat Energy Conversion, Storage, and Utilization

Kunjie Yuan et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Review Polymer Science

A review on Polymeric-Based Phase Change Material for Thermo-Regulating Fabric Application

Deepak G. Prajapati et al.

POLYMER REVIEWS (2020)

Add to Collection

Article Thermodynamics

A novel heat pipe assisted separation type battery thermal management system based on phase change material

Wencan Zhang et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Materials Science, Characterization & Testing

Studies on ionics conduction properties of modification CMC-PVA based polymer blend electrolytes via impedance approach

N. F. Mazuki et al.

POLYMER TESTING (2020)

Add to Collection

Article Chemistry, Physical

A Temperature-Responsive Electrolyte Endowing Superior Safety Characteristic of Lithium Metal Batteries

Qian Zhou et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Biophysics

Pharmaceutical excipient salts effect on micellization and drug solubilization of PEO-PPO-ph-PPO-PEO block copolymer

Yaoyao Zhu et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis of novel microencapsulated phase change material with SnO2/CNTs shell for solar energy storage and photo-thermal conversion

Xiaochun Ma et al.

MATERIALS RESEARCH EXPRESS (2020)

Add to Collection

Article Multidisciplinary Sciences

Water-mediated crystallohydrate-polymer composite as a phase-change electrolyte

Ziyang Tai et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Physical

Self-Healing Janus Interfaces for High-Performance LAGP-Based Lithium Metal Batteries

Qi Liu et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Thermal-Gated Polymer Electrolytes for Smart Zinc-Ion Batteries

Jiacai Zhu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Review Engineering, Multidisciplinary

Recent advances of polymeric phase change composites for flexible electronics and thermal energy storage system

Hailong Hu

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Thermoreversible and Self-Protective Sol-Gel Transition Electrolytes for All-Printed Transferable Microsupercapacitors as Safer Micro-Energy Storage Devices

Hao Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Multidisciplinary Sciences

Properties enhancement of carboxymethyl cellulose with thermo-responsive polymer as solid polymer electrolyte for zinc ion battery

Isala Dueramae et al.

SCIENTIFIC REPORTS (2020)

Add to Collection

Article Energy & Fuels

Novel network structural PEG/PAA/SiO2 composite phase change materials with strong shape stability for storing thermal energy

Zilu Liu et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

Add to Collection

Article Energy & Fuels

Ultralight and fire-extinguishing current collectors for high-energy and high-safety lithium-ion batteries

Yusheng Ye et al.

NATURE ENERGY (2020)

Add to Collection

Article Polymer Science

Room-Temperature Self-Standing Cellulose-Based Hydrogel Electrolytes for Electrochemical Devices

Inaki Gomez et al.

POLYMERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Phenoxazine as a high-voltage p-type redox center for organic battery cathode materials: small structural reorganization for faster charging and narrow operating voltage

Kyunam Lee et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Custom design of solid-solid phase change material with ultra-high thermal stability for battery thermal management

Changren Xiao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Preparation, characterization, and thermal properties of novel fire-resistant microencapsulated phase change materials based on paraffin and a polystyrene shell

Berk Kazanci et al.

RSC ADVANCES (2020)

Add to Collection

Review Chemistry, Physical

Mitigating Thermal Runaway of Lithium-Ion Batteries

Xuning Feng et al.

JOULE (2020)

Add to Collection

Review Chemistry, Physical

Thermal conductivity enhancement on phase change materials for thermal energy storage: A review

Shaofei Wu et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Review Energy & Fuels

Supercooling of phase-change materials and the techniques used to mitigate the phenomenon

Md. Hasan Zahir et al.

APPLIED ENERGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Engineering Janus Interfaces of Ceramic Electrolyte via Distinct Functional Polymers for Stable High-Voltage Li-Metal Batteries

Jia-Yan Liang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Thermodynamics

Effect of fumed silica additive on supercooling, thermal reliability and thermal stability of Na2HPO4•12H2O as inorganic PCM

Shuaiqiao Peng et al.

THERMOCHIMICA ACTA (2019)

Add to Collection

Article Multidisciplinary Sciences

Nanostructured polymer films with metal-like thermal conductivity

Yanfei Xu et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

All-Printed Substrate-Versatile Microsupercapacitors with Thermoreversible Self-Protection Behavior Based on Safe Sol-Gel Transition Electrolytes

Shaoshuai Ma et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Thermoresponsive in Situ Forming Hydrogel with Sol-Gel Irreversibility for Effective Methicillin-Resistant Staphylococcus aureus Infected Wound Healing

Xu Yan et al.

ACS NANO (2019)

Add to Collection

Review Energy & Fuels

A Review of Phase Change Materials for the Thermal Management and Isothermalisation of Lithium-Ion Cells

S. Landini et al.

JOURNAL OF ENERGY STORAGE (2019)

Add to Collection

Review Chemistry, Physical

Progress of enhancing the safety of lithium ion battery from the electrolyte aspect

Qingsong Wang et al.

NANO ENERGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Synergistic Effect of Aligned Graphene Nanosheets in Graphene Foam for High-Performance Thermally Conductive Composites

Zhaohong Wu et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

A solid-state single-ion polymer electrolyte with ultrahigh ionic conductivity for dendrite-free lithium metal batteries

Chen Cao et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

A novel shape-stabilization strategy for phase change thermal energy storage

Changhui Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Frontiers in carbon dots: design, properties and applications

Zeyu Li et al.

MATERIALS CHEMISTRY FRONTIERS (2019)

Add to Collection

Review Polymer Science

Microencapsulation by in situ Polymerization of Amino Resins

Olivier Nguon et al.

POLYMER REVIEWS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Promising and Reversible Electrolyte with Thermal Switching Behavior for Safer Electrochemical Storage Devices

Yunhui Shi et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Thermal-Responsive Polymers for Enhancing Safety of Electrochemical Storage Devices

Hui Yang et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Polymer Science

Excellent thermal stability P(BeA-co-MMA) microcapsules with high thermal energy storage capacity

Yuchen Mao et al.

POLYMER (2018)

Add to Collection

Article Polymer Science

A thermo-/pH-responsive hydrogel (PNIPAM-PDMA-PAA) with diverse nanostructures and gel behaviors as a general drug carrier for drug release

Yan Chen et al.

POLYMER CHEMISTRY (2018)

Add to Collection

Article Chemistry, Physical

Microencapsulating inorganic and organic flame retardants for the safety improvement of lithium-ion batteries

Chi-An Chen et al.

SOLID STATE IONICS (2018)

Add to Collection

Article Multidisciplinary Sciences

A smart safe rechargeable zinc ion battery based on sol-gel transition electrolytes

Funian Mo et al.

SCIENCE BULLETIN (2018)

Add to Collection

Article Materials Science, Multidisciplinary

n-Phase micromechanical framework for the conductivity and elastic modulus of particulate composites: Design to microencapsulated phase change materials (MPCMs)-cementitious composites

Wenxiang Xu et al.

MATERIALS & DESIGN (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Two-dimensional materials for miniaturized energy storage devices: from individual devices to smart integrated systems

Panpan Zhang et al.

CHEMICAL SOCIETY REVIEWS (2018)

Add to Collection

Review Chemistry, Physical

A comprehensive review on a passive (phase change materials) and an active (thermoelectric cooler) battery thermal management system and their limitations

Abu Raihan Mohammad Siddique et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Review Chemistry, Physical

Recent Advances in Aqueous Zinc-Ion Batteries

Guozhao Fang et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Core-Shell Microcapsules Containing Flame Retardant Tris(2-chloroethyl phosphate) for Lithium-Ion Battery Applications

Marta Baginska et al.

ACS OMEGA (2018)

Add to Collection

Review Chemistry, Physical

Thermal runaway mechanism of lithium ion battery for electric vehicles: A review

Xuning Feng et al.

ENERGY STORAGE MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Controlled Sol-Gel Transitions of a Thermoresponsive Polymer in a Photoswitchable Azobenzene Ionic Liquid as a Molecular Trigger

Caihong Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Article Energy & Fuels

Synthesis and Performances of Phase Change Materials Microcapsules with a Polymer/BN/TiO2 Hybrid Shell for Thermal Energy Storage

Na Sun et al.

ENERGY & FUELS (2017)

Add to Collection

Article Thermodynamics

Thermal sensitive flexible phase change materials with high thermal conductivity for thermal energy storage

Wan-Wan Li et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

Add to Collection

Article Engineering, Chemical

A low cost shutdown sandwich-like composite membrane with superior thermo-stability for lithium-ion battery

Dan Li et al.

JOURNAL OF MEMBRANE SCIENCE (2017)

Add to Collection

Review Green & Sustainable Science & Technology

A review on current status and challenges of inorganic phase change materials for thermal energy storage systems

Shamseldin A. Mohamed et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Add to Collection

Article Chemistry, Physical

Study on a reliable epoxy-based phase change material: facile preparation, tunable properties, and phase/microphase separation behavior

Qingsong Lian et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Physical

Preparation and physicochemical properties of microcapsules containing phase-change material with graphene/organic hybrid structure shells

Jun-Feng Su et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Multidisciplinary Sciences

Electrospun core-shell microfiber separator with thermal-triggered flame-retardant properties for lithium-ion batteries

Kai Liu et al.

SCIENCE ADVANCES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Smart Electrochemical Energy Storage Devices with Self-Protection and Self-Adaptation Abilities

Yun Yang et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Synthesis and Characterization of Microencapsulated Phase Change Materials with Poly(urea-urethane) Shells Containing Cellulose Nanocrystals

Youngman Yoo et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Physics, Applied

Mitigating thermal runaway of lithium-ion battery through electrolyte displacement

Yang Shi et al.

APPLIED PHYSICS LETTERS (2017)

Add to Collection

Article Electrochemistry

Boehmite-based Microcapsules as Flame-retardants for Lithium-ion Batteries

Pei-Hsuan Huang et al.

ELECTROCHIMICA ACTA (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Single lithium-ion conducting solid polymer electrolytes: advances and perspectives

Heng Zhang et al.

CHEMICAL SOCIETY REVIEWS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Role of Amines in Thermal-Runaway-Mitigating Lithium-Ion Battery

Yang Shi et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Self-Healing Hydrogels

Danielle Lynne Taylor et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Thermoplastic Elastomer-Enabled Smart Electrolyte for Thermoresponsive Self-Protection of Electrochemical Energy Storage Devices

Ye Shi et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Exothermic behaviors of mechanically abused lithium-ion batteries with dibenzylamine

Yang Shi et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection

Article Polymer Science

Design of Thermoresponsive Polymers with Aqueous LCST, UCST, or Both: Modification of a Reactive Poly(2-vinyl-4,4-dimethylazIactone) Scaffold

Yicheng Zhu et al.

MACROMOLECULES (2016)

Add to Collection

Article Polymer Science

Pluronic nanoparticles as anti-oxidant carriers for polymers

Nadka Tzankova Dintcheva et al.

POLYMER DEGRADATION AND STABILITY (2016)

Add to Collection

Review Green & Sustainable Science & Technology

Types, methods, techniques, and applications for microencapsulated phase change materials (MPCM): A review

Jessica Giro-Paloma et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Add to Collection

Review Chemistry, Physical

Polymer Nanocomposites-A Comparison between Carbon Nanotubes, Graphene, and Clay as Nanofillers

Mrinal Bhattacharya

MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Self-Protection of Electrochemical Storage Devices via a Thermal Reversible Sol-Gel Transition

Hui Yang et al.

ADVANCED MATERIALS (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Biomimetic super-lyophobic and super-lyophilic materials applied for oil/water separation: a new strategy beyond nature

Ben Wang et al.

CHEMICAL SOCIETY REVIEWS (2015)

Add to Collection

Article Electrochemistry

Biopolymer electrolytes based on blend of kappa-carrageenan and cellulose derivatives for potential application in dye sensitized solar cell

S. Rudhziah et al.

ELECTROCHIMICA ACTA (2015)

Add to Collection

Review Construction & Building Technology

Review on using microencapsulated phase change materials (PCM) in building applications

Yeliz Konuklu et al.

ENERGY AND BUILDINGS (2015)

Add to Collection

Article Thermodynamics

Developments in organic solid-liquid phase change materials and their applications in thermal energy storage

R. K. Sharma et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Self-Extinguishing Lithium Ion Batteries Based on Internally Embedded Fire-Extinguishing Microcapsules with Temperature-Responsiveness

Taeeun Yim et al.

NANO LETTERS (2015)

Add to Collection

Article Multidisciplinary Sciences

In-operando high-speed tomography of lithium-ion batteries during thermal runaway

Donal P. Finegan et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Polymer Science

Fabrication of Reversible Phase Transition Polymer Gels toward Metal Ion Sensing

Huan Shao et al.

MACROMOLECULES (2014)

Add to Collection

Article Multidisciplinary Sciences

Improving battery safety by early detection of internal shorting with a bifunctional separator

Hui Wu et al.

NATURE COMMUNICATIONS (2014)

Add to Collection

Article Chemistry, Physical

Upper-critical solution temperature (UCST) polymer functionalized graphene oxide as thermally responsive ion permeable membrane for energy storage devices

Jingmei Shen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis of Multilayer Graphene Balls by Carbon Segregation from Nickel Nanoparticles

Seon-Mi Yoon et al.

ACS NANO (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Reversible Control of Electrochemical Properties Using Thermally-Responsive Polymer Electrolytes

Jesse C. Kelly et al.

ADVANCED MATERIALS (2012)

Add to Collection

Article Electrochemistry

An electrolyte additive for thermal shutdown protection of Li-ion batteries

Lan Xia et al.

ELECTROCHEMISTRY COMMUNICATIONS (2012)

Add to Collection

Article Polymer Science

Positive temperature coefficient effect of polymer-carbon filler composites under self-heating evaluated quantitatively in terms of potential barrier height and width associated with tunnel current

Ru Chen et al.

POLYMER (2012)

Add to Collection

Article Energy & Fuels

Polyurethanes as solid-solid phase change materials for thermal energy storage

Cemil Alkan et al.

SOLAR ENERGY (2012)

Add to Collection

Review Thermodynamics

Organic phase change materials and their textile applications: An overview

Nihal Sarier et al.

THERMOCHIMICA ACTA (2012)

Add to Collection

Article Chemistry, Physical

Autonomic Shutdown of Lithium-Ion Batteries Using Thermoresponsive Microspheres

Marta Baginska et al.

ADVANCED ENERGY MATERIALS (2012)

Add to Collection

Article Chemistry, Physical

Improved Functionality of Lithium-Ion Batteries Enabled by Atomic Layer Deposition on the Porous Microstructure of Polymer Separators and Coating Electrodes

Yoon Seok Jung et al.

ADVANCED ENERGY MATERIALS (2012)

Add to Collection

Article Energy & Fuels

Electrospun phase change fibers based on polyethylene glycol/cellulose acetate blends

Changzhong Chen et al.

APPLIED ENERGY (2011)

Add to Collection

Article Chemistry, Physical

The clouding behaviour of PEO-PPO based triblock copolymers in aqueous ionic surfactant solutions: A new approach for cloud point measurements

Tejas Patel et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2010)

Add to Collection

Review Pharmacology & Pharmacy

Thermoresponsive hydrogels in biomedical applications

Leda Klouda et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2008)

Add to Collection

Article Polymer Science

Thermal stability of composite phase change material microcapsules incorporated with silver nano-particles

Song Qingwen et al.

POLYMER (2007)

Add to Collection

Review Chemistry, Multidisciplinary

Functional inorganic nanofillers for transparent polymers

H. Althues et al.

CHEMICAL SOCIETY REVIEWS (2007)

Add to Collection

Article Chemistry, Multidisciplinary

Comparison of thermosensitive properties of poly(amidoamine) dendrimers with peripheral N-isopropylamide groups and linear polymers with the same groups

Yasuhiro Haba et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2007)

Add to Collection

Article Chemistry, Multidisciplinary

UCST wetting transitions of polyzwitterionic brushes driven by self-association

O Azzaroni et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2006)

Add to Collection

Review Multidisciplinary Sciences

Interfaces and the driving force of hydrophobic assembly

D Chandler

NATURE (2005)

Add to Collection

Article Chemistry, Physical

Development of new safe electrode for lithium rechargeable battery

M Kise et al.

JOURNAL OF POWER SOURCES (2005)

Add to Collection

Article Polymer Science

Rheological study of the sol-gel transition of hybrid gels

Y Zhao et al.

MACROMOLECULES (2003)

Add to Collection

Article Chemistry, Physical

Thermal modeling of secondary lithium batteries for electric vehicle/hybrid electric vehicle applications

S Al-Hallaj et al.

JOURNAL OF POWER SOURCES (2002)

Add to Collection

Review Chemistry, Physical

A view of the hydrophobic effect

NT Southall et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2002)

Add to Collection

Article Physics, Multidisciplinary

Sol-gel transition of concentrated colloidal suspensions

S Romer et al.

PHYSICAL REVIEW LETTERS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.