4.6 Article

Research on Lightning Current Shunting Characteristics Between Tower and Ground Wires Based on Field Test and Numerical Simulation

Journal

IEEE TRANSACTIONS ON POWER DELIVERY
Volume 38, Issue 2, Pages 1386-1394

Publisher

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
DOI: 10.1109/TPWRD.2022.3213932

Keywords

Poles and towers; Wires; Power transmission lines; Electrodes; Grounding; Lightning; Impedance; Current shunting; field test; ground wires; lightning response; transmission line; transmission tower

Ask authors/readers for more resources

A field test on a 220 kV transmission line was conducted to obtain the characteristics of lightning current shunting. The test results were compared with simulation results, confirming the feasibility of commonly used simulation models. The main influencing factors of shunting were discussed. The results showed significant changes in the tower current compared to the applied impulse current, with high frequency components entering the tower, resulting in a steeper current waveform. This difference was closely related to the waveform of the applied impulse current, with slower waveforms causing larger differences between the tower current and the original impulse current. Although some current flows along the ground wires, this phenomenon may pose higher requirements for the tower grounding device.
When lightning strikes the transmission tower, lightning current is shunted between the ground wires and the tower. The shunting changes the current waveform in the tower, which may affect the potential rise of the tower and the grounding device. A field test is conducted on a 220 kV transmission line and the characteristics of lightning current shunting are obtained in this paper. The test results are compared with the simulation results, which verifies the feasibility of the commonly used simulation models. The main influencing factors of the shunting are discussed. The results show that the current in the tower changes obviously in our case compared to the applied impulse current. The high frequency components of the impulse current mainly enter the tower, which leads to a steeper current waveform in the tower. The difference is closely related to the waveform of the applied impulse current. The slower the impulse current waveform, the greater the difference between the front time and amplitude of the current in the tower and that of the original impulse current. Although part of the current flows along ground wires, this phenomenon may put forward higher requirements for the tower grounding device.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.6
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available