☆ 4.7 Article

Charge transfer doping of graphene oxide with nickel oxide nanoparticles for stable and efficient carbon-based, all-inorganic CsPbBr3 perovskite solar cells

DALTON TRANSACTIONS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Non-preheating fabricated semitransparent quasi-2D perovskite solar cells

Wenjie Luo et al.

Summary: A non-preheating film-casting method is proposed to achieve a highly uniform and phase controllable quasi-2D perovskite film. The resulting film shows good light utilization efficiency, power conversion efficiency, and stability in semitransparent solar cells.

CHEMICAL COMMUNICATIONS (2023)

Add to Collection

Article Engineering, Environmental

Efficient interface engineering of N, N'-Dicyclohexylcarbodiimide for stable HTMs-free CsPbBr3 perovskite solar cells with 10.16%-efficiency

Jingwei Zhu et al.

Summary: By depositing DCC at the PVSK/carbon back interface, an effective interface engineering approach is employed to passivate surface defects, improve contact, and boost the efficiency of carbon-based perovskite solar cells. This modification not only enhances the performance but also ensures long-term stability of the device under harsh conditions.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Multidisciplinary Sciences

Constructing heterojunctions by surface sulfidation for efficient inverted perovskite solar cells

Xiaodong Li et al.

Summary: A stable perovskite heterojunction was achieved in inverted solar cells by sulfidating the surface of lead-rich perovskite films, resulting in improved power conversion efficiency and open-circuit voltage.

SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Room Temperature Fabrication of SnO2 Electrodes Enabling Barrier-Free Electron Extraction for Efficient Flexible Perovskite Photovoltaics

Jun-Xing Zhong et al.

Summary: Room temperature-processed electron transport layers (RT-ETLs) have great potential in fabricating high-performance flexible perovskite solar cells (PSCs) in an energy-saving manner. However, the performance of RT-ETL is normally limited due to various issues. In this study, a novel strategy is demonstrated to prepare annealing-free RT-ETL, which optimizes the interfacial energy level alignment and significantly enhances the device efficiency.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Improving Heat Transfer Enables Durable Perovskite Solar Cells

Ning Yang et al.

Summary: A solution for improving the thermal stability of hybrid perovskite solar cells (PSCs) is reported. By introducing hexagonal boron nitride (h-BN) inside the device and a radiator fin outside, the dissipated heat within the absorber can be rapidly removed, effectively reducing the cell temperature. The study shows that this strategy significantly improves the thermal conductivity of perovskite and prolongs the lifetime of PSCs.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

In situ formation of inorganic healing overlayer for interface-stabilized all-inorganic CsPbIBr2 perovskite solar cells

Junshuai Zhang et al.

Summary: This study presents an interface-stabilization strategy for a perovskite film by forming an inorganic ZrO2 layer to strengthen the perovskite lattice, resulting in improved efficiency and stability of the device.

CHEMICAL COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

In situ lead oxysalt passivation layer for stable and efficient perovskite solar cells

Wenjing Hou et al.

Summary: By employing a Rb2SO4 additive to passivate the Pb2+ defects in a perovskite film and forming PbSO(4) in situ, the surface and grain boundaries of the perovskite film are covered to prevent decomposition by moisture. Ultimately, a device modified with Rb2SO4 achieved improved power conversion efficiency (22.25%) and long-term stability.

CHEMICAL COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Physical

Efficient and stable flexible perovskite solar cells based on graphene-AgNWs substrate and carbon electrode without hole transport materials

JunJun Jin et al.

Summary: The study successfully prepared flexible C-PSCs based on carbon electrodes, achieving an optimal efficiency of 9.73% through low-temperature solution process. These devices exhibited superior mechanical robustness and long-term durability compared to their counterparts on flexible ITO/PET substrates.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

p-Type Charge Transfer Doping of Graphene Oxide with (NiCo)1-yFeyOx for Air-Stable, All-Inorganic CsPbIBr2 Perovskite Solar Cells

Jian Du et al.

Summary: By utilizing (NiCo)(1-y)FeyOx nanoparticle decorated graphene oxide (GO), the efficiency of all-inorganic CsPbIBr2 PSC was significantly improved, resolving the contradiction between charge extraction and localization. The top device exhibited excellent long-term stability under 10% relative humidity without encapsulation for over 70 days.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Energy & Fuels

Tri-Brominated Perovskite Film Management and Multiple-Ionic Defect Passivation for Highly Efficient and Stable Solar Cells

Zekun Gong et al.

Summary: The study demonstrates that adding TBBPA to perovskite films can manipulate crystal growth and passivate defects, improving hole mobility and energy level alignment of CsPbBr3 perovskite films, resulting in significantly enhanced performance of PSCs.

SOLAR RRL (2021)

Add to Collection

Article Chemistry, Physical

The poly(styrene-co-acrylonitrile) polymer assisted preparation of high-performance inverted perovskite solar cells with efficiency exceeding 22%

Jiabao Yang et al.

Summary: The solution treatment of perovskite films introduces defects in the grain boundaries, affecting the efficiency and stability of perovskite solar cells. By synthesizing the PS-PAN polymer and incorporating it into the perovskite film, the efficiency of the solar cells is significantly improved and maintained under various environmental conditions.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Synergistic Effects of Eu-MOF on Perovskite Solar Cells with Improved Stability

Jie Dou et al.

Summary: The introduction of an ultrathin Eu-MOF layer in perovskite solar cells has been shown to enhance device stability and light utilization by reducing defect concentration, improving carrier transport, and utilizing the Forster resonance energy transfer effect. This leads to a champion power conversion efficiency of 22.16% and excellent device stability, with 96% of original PCE retained after 2000 hours under 30% relative humidity and 91% retained after 1200 hours at 85 degrees C in N-2 environment.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Printable and Homogeneous NiOx Hole Transport Layers Prepared by a Polymer-Network Gel Method for Large-Area and Flexible Perovskite Solar Cells

Shaohua Zhang et al.

Summary: This study presents a strategy to synthesize NiOx NPs with high crystallinity and good dispersibility through the polymer network micro-precipitation method, effectively alleviating the aggregation issue of NiOx NPs. The addition of ionic liquid not only inhibits the secondary aggregation of NiOx NPs, but also significantly enhances the properties of the colloidal solution. NiOx HTLs based on this technique achieve high power conversion efficiency on both flexible and rigid substrates.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Review Chemistry, Physical

Insights into iodoplumbate complex evolution of precursor solutions for perovskite solar cells: from aging to degradation

Bo Li et al.

Summary: The power conversion efficiency of solution-processed perovskite solar cells is significantly affected by the characteristics of the perovskite precursor solutions, particularly the iodoplumbate complexes in equilibrium in the solution. The coordination of solvent and additive molecules with Pb2+ ions impacts the chemical equilibria and subsequently influences the perovskite crystallization and film quality. The evolution of perovskite precursor solutions driven by components, aging, degradation, and humidity plays a crucial role in the physical properties of perovskite films and the photovoltaic performance of PSCs.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Physical

Spontaneous enhancement of the stable power conversion efficiency in perovskite solar cells

Somayeh Moghadamzadeh et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Zwitterion Coordination Induced Highly Orientational Order of CH3NH3PbI3 Perovskite Film Delivers a High Open Circuit Voltage Exceeding 1.2 V

Weiran Zhou et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Inorganic & Nuclear

A Highly Stable All-Inorganic CsPbBr3 Perovskite Solar Cell

Masood Mehrabian et al.

EUROPEAN JOURNAL OF INORGANIC CHEMISTRY (2019)

Add to Collection

Article Chemistry, Physical

Improving the conductivity of sol-gel derived NiOx with a mixed oxide composite to realize over 80% fill factor in inverted planar perovskite solar cells

Menglin Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Energy & Fuels

Using SnO2 QDs and CsMBr3 (M = Sn, Bi, Cu) QDs as Charge-Transporting Materials for 10.6%-Efficiency All-Inorganic CsPbBr3 Perovskite Solar Cells with an Ultrahigh Open-Circuit Voltage of 1.610 V

Yuanyuan Zhao et al.

SOLAR RRL (2019)

Add to Collection

Article Chemistry, Physical

Congeneric Incorporation of CsPbBr3 Nanocrystals in a Hybrid Perovskite Heterojunction for Photovoltaic Efficiency Enhancement

Huachao Zai et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

High-Purity Inorganic Perovskite Films for Solar Cells with 9.72% Efficiency

Jialong Duan et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon-Electrode-Tailored All-Inorganic Perovskite Solar Cells To Harvest Solar and Water-Vapor Energy

Jialong Duan et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Cadmium sulfide as an efficient electron transport material for inverted planar perovskite solar cells

Jinbiao Jia et al.

CHEMICAL COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

All-Inorganic CsPb1-xGexI2Br Perovskite with Enhanced Phase Stability and Photovoltaic Performance

Fu Yang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Article Chemistry, Physical

Graphene quantum dots decorated TiO2 mesoporous film as an efficient electron transport layer for high-performance perovskite solar cells

Deli Shen et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Energy & Fuels

Accelerated degradation of methylammonium lead iodide perovskites induced by exposure to iodine vapour

Shenghao Wang et al.

NATURE ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Fluorine Functionalized Graphene Nano Platelets for Highly Stable Inverted Perovskite Solar Cells

Gi-Hwan Kim et al.

NANO LETTERS (2017)

Add to Collection

Article Multidisciplinary Sciences

Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells

Woon Seok Yang et al.

SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Cesium Doped NiOx as an Efficient Hole Extraction Layer for Inverted Planar Perovskite Solar Cells

Wei Chen et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Solution-Processed Lithium-Doped ZnO Electron Transport Layer for Efficient Triple Cation (Rb, MA, FA) Perovskite Solar Cells

Md Arafat Mahmud et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

All-Inorganic Perovskite Solar Cells

Jia Liang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Abnormal crystal growth in CH3NH3PbI3-xClx using a multi-cycle solution coating process

Qingfeng Dong et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Hybrid interfacial layer leads to solid performance improvement of inverted perovskite solar cells

Wei Chen et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Add to Collection

Article Energy & Fuels

Effect of solution processed graphene oxide/nickel oxide bi-layer on cell performance of bulk-heterojunction organic photovoltaic

Mi Sun Ryu et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.