Related references
Note: Only part of the references are listed.
Article
Engineering, Mechanical
Jiayao Sun et al.
Summary: In this paper, a methodology for predicting extreme riser loads based on experimental measurements was introduced. The ACER method was proposed and validated using experimental data, showing its accuracy and reliability in analyzing extreme value predictions. This method can be used in the design stage to minimize potential riser damage and operational risks.
PROBABILISTIC ENGINEERING MECHANICS
(2022)
Article
Engineering, Ocean
Yihan Xing et al.
Summary: This study investigates the extreme positional responses of the subsea shuttle tanker (SST) during offloading when the aft thruster fails. Empirical data is generated using time-domain simulations, and accurate bivariate extreme value predictions are obtained using the averaged conditional exceedance rate (ACER) method. The results show that the response at the aft where the thruster fails is approximately 1.3-2.6 times larger than the response at the fore of the SST.
APPLIED OCEAN RESEARCH
(2022)
Article
Engineering, Mechanical
Oleg Gaidai et al.
Summary: This paper presents a practical approach to studying extreme wind speeds and wave heights in offshore engineering, as well as a new technique to improve correlated extreme value predictions.
PROBABILISTIC ENGINEERING MECHANICS
(2022)
Article
Engineering, Marine
Xiaosen Xu et al.
Summary: This study presents an efficient Monte Carlo based method to study bivariate extreme dynamic response statistics in the context of FOWT design. The ACER2D method enables accurate and efficient predictions of extreme return period contours, which can help optimize FOWT design values and reduce structural production costs.
Article
Environmental Sciences
Xiaosen Xu et al.
Summary: This study analyzes the structural loads of floating offshore wind turbines due to environmental loads and proposes a unique reliability approach for multi-dimensional structural responses. The probability of system failure can be accurately predicted using measured structural response.
FRONTIERS IN MARINE SCIENCE
(2022)
Article
Engineering, Marine
Oleg Gaidai et al.
Summary: The paper introduces a novel structural reliability method for multi-dimensional structural responses, providing accurate predictions of system failure probability. The study focuses on container ships facing extreme stresses and roll angles in harsh weather conditions, highlighting the significance of data measured on actual ships for understanding ship motions statistics.
Article
Engineering, Marine
Rajiv Balakrishna et al.
Summary: This study uses a novel statistical model called ACER2D to estimate the extreme load responses of a 10 MW semi-submersible floating wind turbine. The results show that the ACER2D method can offer more accurate predictions.
Article
Environmental Sciences
Oleg Gaidai et al.
Summary: This paper presents a novel structural reliability method for analyzing extreme event risks in multi-dimensional environmental systems. By applying this method to selected measurement sites in Southern Norway, the study demonstrates its effectiveness and compares it with traditional methods. The proposed method can handle high-dimensional systems with cross-correlations and accurately predict system failure probabilities.
FRONTIERS IN ENVIRONMENTAL SCIENCE
(2022)
Article
Engineering, Mechanical
Oleg Gaidai et al.
Summary: This paper presents an alternative method for extrapolation based on the intrinsic properties of the data set itself, without assuming any specific functional classes. The proposed method can be applied in engineering design and is illustrated through two examples, one using synthetic data and the other using actual onboard measured data from a container ship. The accuracy of the proposed method is compared with the Naess-Gaidai extrapolation method, and new methods for smoothing distribution tail irregularities are also discussed.
FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND
(2022)
Article
Engineering, Multidisciplinary
Oleg Gaidai et al.
Summary: This paper focuses on determining extreme positional responses at one location when the aft thruster fails during offloading using data with a shorter time record from another location at the subsea shuttle tanker (SST).
RESULTS IN ENGINEERING
(2022)
Article
Engineering, Mechanical
Oleg Gaidai et al.
Summary: This paper considers the feasibility of the bivariate correction method in predicting the extreme load and motion responses of a floating wind turbine (FWT). A novel methodology is proposed to accurately correct the data and improve the bivariate predictions. The results show that the bivariate correction method can provide more robust and precise predictions.
FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND
(2022)
Article
Engineering, Marine
Oleg Gaidai et al.
Summary: This paper focuses on predicting extreme motions during WFSV operation and studying safety concerns when docking against wind towers, using AQWA software to analyze vessel response to hydrodynamic wave loads under actual sea conditions. A novel method for estimating bivariate statistics, based on Monte Carlo simulations, is outlined to mitigate excessive motions and reduce risks to crew during certain sea conditions.
SHIPS AND OFFSHORE STRUCTURES
(2021)
Article
Engineering, Marine
Xiaosen Xu et al.
Summary: The paper discusses the use of the FAST code to analyze internal bending moments of offshore wind turbines due to environmental wave loads. A computationally efficient Monte Carlo based methodology is proposed for estimating extreme load or response statistics. The approach may be beneficial in minimizing potential FOWT mechanical damage during the design stage by defining optimal wind turbine parameters.
SHIPS AND OFFSHORE STRUCTURES
(2021)
Article
Engineering, Marine
Yuliang Zhao et al.
Summary: This study evaluates the design loads of mooring lines for offshore floating structures subjected to random loads using statistical models such as the global maxima method, Weibull distribution, POT method and ACER method. By considering different load combinations and the Nataf transformation model, a more reliable design load estimation is established.
Article
Engineering, Civil
Xu Xiao-sen et al.
Summary: The paper focuses on the robust prediction of extreme motions during operation of maintenance vessels in offshore wind energy industry, particularly the safety of docking against wind towers. The vessel response to hydrodynamic wave loads under actual sea conditions was analyzed using AQWA software. A novel method for estimating extreme roll statistics was proposed to provide accurate extreme value prediction.
CHINA OCEAN ENGINEERING
(2021)
Article
Engineering, Ocean
Zhang Jian et al.
JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME
(2018)
Article
Green & Sustainable Science & Technology
Oleg Gaidai et al.
Article
Energy & Fuels
Nikolay Dimitrov
Article
Engineering, Marine
Suresh Rajendran et al.
Article
Engineering, Civil
A. Naess et al.
JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS
(2015)
Review
Green & Sustainable Science & Technology
Joel Igba et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS
(2015)
Article
Engineering, Ocean
A. Naess et al.
JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME
(2009)
Article
Engineering, Mechanical
A. Naess et al.
JOURNAL OF ENGINEERING MECHANICS
(2008)
