☆ 4.7 Review

Recent progress in the development of high-efficiency inverted perovskite solar cells

NPG ASIA MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Improving Contact and Passivation of Buried Interface for High-Efficiency and Large-Area Inverted Perovskite Solar Cells

Xiaojia Xu et al.

Summary: By molecular engineering the structure of PTAA and designing multifunctional pyridine units, this study improved the performance of HTMs and inverted-structured PSCs. Optimization of hydrophilicity and passivation efficacy was achieved by controlling the linking-site and chemical structure of the pyridine unit, leading to enhanced efficiency of the PSCs.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

MoO3 doped PTAA for high-performance inverted perovskite solar cells

Chenyue Wang et al.

Summary: This study successfully improved the performance of planar perovskite solar cells by doping poly[bis(4-phenyl)(2,4,6-triMethylphenyl)aMine] (PTAA) with 3 wt% molybdenum oxide (MoO3), resulting in better hole transport efficiency and extraction at the PTAA/perovskite interface. The power conversion efficiency of the fabricated PSCs using MoO3-doped PTAA HTL reached 20.06%, compared to 17.71% with pristine PTAA HTL, demonstrating the potential of MoO3 as a dopant for enhancing HTLs in high-performance PSCs and other perovskite-based optoelectronics.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Multidisciplinary Sciences

All-perovskite tandem solar cells with improved grain surface passivation

Renxing Lin et al.

Summary: Researchers have developed ammonium-cation-passivated Pb-Sn perovskites with long diffusion lengths, enabling high-efficiency all-perovskite tandem solar cells. By enhancing the adsorption of the passivator using a stronger surface-passivator interaction, the carrier diffusion length within Pb-Sn perovskites is doubled, resulting in an efficiency of over 22%. The certified efficiency of 26.4% achieved in the all-perovskite tandem solar cells exceeds that of the best-performing single-junction perovskite solar cells.

NATURE (2022)

Add to Collection

Article Optics

Large-area perovskite solar cells employing spiro-Naph hole transport material

Mingyu Jeong et al.

Summary: By utilizing a symmetry-tuned strategy at the molecular level, we have developed a new class of spiro-Naph analogues as the hole transport material in perovskite solar cells, resulting in improved stability and power conversion efficiency.

NATURE PHOTONICS (2022)

Add to Collection

Article Multidisciplinary Sciences

Constructing heterojunctions by surface sulfidation for efficient inverted perovskite solar cells

Xiaodong Li et al.

Summary: A stable perovskite heterojunction was achieved in inverted solar cells by sulfidating the surface of lead-rich perovskite films, resulting in improved power conversion efficiency and open-circuit voltage.

SCIENCE (2022)

Add to Collection

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Improved Performance and Stability of Perovskite Solar Modules by Regulating Interfacial Ion Diffusion with Nonionic Cross-Linked 1D Lead-Iodide

Haipeng Zeng et al.

Summary: The introduction of a novel compound DPPO significantly improved the electronic quality and stability of perovskite films, leading to high-efficiency and stable solar modules.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Review Chemistry, Physical

Recent Progress of Critical Interface Engineering for Highly Efficient and Stable Perovskite Solar Cells

Yahong Li et al.

Summary: Organic-inorganic lead halide perovskite solar cells have shown great potential as a new generation of solar-based renewable energy, with record-breaking power conversion efficiency. However, the long-term stability remains a major concern for commercialization. Interface engineering is identified as a valid strategy to enhance both efficiency and stability of PSCs, with latest research summarizing advancements for various interfaces.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Stable α-FAPbI3 in Inverted Perovskite Solar Cells with Efficiency Exceeding 22% via a Self-Passivation Strategy

Diwei Zhang et al.

Summary: The deposition of FAPbI(3) films assisted by methylamine chloride shows promising photovoltaic performance in inverted-structured solar cells. The addition of excess PbI2 effectively reduces charge trap densities and prolongs carrier lifetimes. By optimization, a remarkable power conversion efficiency of 22.13% has been achieved, with excellent long-term stability.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Co-assembled Monolayers as Hole-Selective Contact for High-Performance Inverted Perovskite Solar Cells with Optimized Recombination Loss and Long-Term Stability

Xiang Deng et al.

Summary: This paper introduces a new method of using co-assembled monolayer (co-SAM) to achieve efficient hole selection and suppressed recombination in inverted perovskite solar cells (PSCs) by adjusting the position of substituents in the compound. By utilizing co-SAM, excellent performance and stability of the solar cells are achieved.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Optics

Quantum-size-tuned heterostructures enable efficient and stable inverted perovskite solar cells

Hao Chen et al.

Summary: The energy landscape of reduced-dimensional perovskites (RDPs) can be tailored by adjusting their layer width. In this study, a method to increase the layer width of RDPs in 2D/3D heterostructures is reported to address electron blocking at the interface. This method allows for the development of efficient inverted perovskite solar cells with high stability.

NATURE PHOTONICS (2022)

Add to Collection

Article Multidisciplinary Sciences

Organometallic-functionalized interfaces for highly efficient inverted perovskite solar cells

Zhen Li et al.

Summary: Functionalizing the interfaces of multication and halide perovskite solar cells with an organometallic compound, ferrocenyl-bis-thiophene-2-carboxylate (FcTc(2)), enhances their efficiency and stability. The resulting devices exhibit high performance and stability, as demonstrated by tests and continuous operation.

SCIENCE (2022)

Add to Collection

Article Multidisciplinary Sciences

Damp heat-stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions

Randi Azmi et al.

Summary: By tailoring the dimensional fragments of two-dimensional perovskite layers, damp-heat stable perovskite solar cells with high power conversion efficiencies were successfully fabricated. These cells retain over 95% of their initial value after more than 1000 hours under damp-heat test conditions, meeting one of the critical industrial stability standards for photovoltaic modules.

SCIENCE (2022)

Add to Collection

Article Multidisciplinary Sciences

Scalable processing for realizing 21.7%-efficient all-perovskite tandem solar modules

Ke Xiao et al.

Summary: Efficient all-perovskite tandem solar modules were fabricated using tunable cesium ratio of mixed-halide perovskite and an electrically conductive conformal diffusion barrier. These modules demonstrated high efficiency and stability even after continuous operation.

SCIENCE (2022)

Add to Collection

Article Chemistry, Applied

Self-assembled donor-acceptor hole contacts for inverted perovskite solar cells with an efficiency approaching 22%: The impact of anchoring groups

Qiaogan Liao et al.

Summary: In this study, a series of self-assembled molecules with different anchoring groups were designed and synthesized, showing great potential in high-performance perovskite solar cells. The molecules with cyanoacrylic acid anchoring groups exhibited stronger dipole moments and formed a homogeneous monolayer on the conductive glass surface. By optimizing the structure and properties of the self-assembled film, remarkable power conversion efficiency was achieved.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

Boost the efficiency of nickel oxide-based formamidinium-cesium perovskite solar cells to 21% by using coumarin 343 dye as defect passivator

Sanwan Liu et al.

Summary: This study introduces an organic dye C343 into the perovskite to improve the efficiency and stability of nickel oxide-based inverted perovskite solar cells. The strong coordination between C343 and Pb2+ optimizes perovskite crystal growth and reduces defects densities within perovskite films, leading to one of the highest efficiencies reported for FACs perovskite and nickel oxide based inverted PSCs. Additionally, the utilization of C343 benefits devices' stability, maintaining performance over 94% and 95% after aging and continuous operation for 500 hours, respectively.

NANO ENERGY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Effective Passivation with Size-Matched Alkyldiammonium Iodide for High-Performance Inverted Perovskite Solar Cells

Sanwan Liu et al.

Summary: This study systematically investigates the defect passivation role of several alkylammonium salts in formamidinium-cesium perovskite, finding that BDAI(2) salt exhibits the best passivation effect by reducing trap-state density and enhancing carrier extraction. BDAI(2)-modified devices achieve impressive efficiencies in both rigid and flexible substrates, with 92% of the initial efficiency maintained after long-term operation under continuous illumination. The mechanical flexibility of the BDAI(2)-modified flexible device is also improved due to the release of residual stress.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Organic Hole-Transport Layers for Efficient, Stable, and Scalable Inverted Perovskite Solar Cells

Yiguo Yao et al.

Summary: This review systematically summarizes recent progress in using organic hole-transporting layers (HTLs) in inverted p-i-n perovskite solar cells (PSCs), including conductive polymers, small molecules, and self-assembled monolayers. The molecular structure, hole-transport properties, energy levels, and relevant device properties and performances of organic HTLs are analyzed. Design principles and future outlook for highly efficient organic HTLs in inverted PSCs are proposed, aiming to inspire further innovative development of novel organic HTLs for more efficient, stable, and scalable inverted PSCs.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Inverted planar heterojunction perovskite solar cells with high ultraviolet stability

Xueliang Zhu et al.

Summary: The study focuses on the UV-induced degradation of inverted perovskite solar cells and proposes a method to suppress it effectively by modifying the heterojunction with a self-assembled monolayer. The findings provide insights into the long-term stability of perovskite PVs and offer a potential solution to mitigate UV-ID issues.

NANO ENERGY (2022)

Add to Collection

Article Energy & Fuels

Solar cell efficiency tables (Version 60)

Martin A. Green et al.

Summary: This article presents consolidated tables showing the highest independently confirmed efficiencies for solar cells and modules. The guidelines for including results in these tables are outlined, and new entries since January 2022 are reviewed. An appendix describing temporary electrical contacting methods and terminology for large-area solar cells is also included.

PROGRESS IN PHOTOVOLTAICS (2022)

Add to Collection

Article Multidisciplinary Sciences

Inactive (PbI2)2RbCl stabilizes perovskite films for efficient solar cells

Yang Zhao et al.

Summary: In halide perovskite solar cells, introducing RbCl doping effectively stabilizes the perovskite phase by converting excess PbI2 into an inactive compound. This strategy achieved a certified PCE of 25.6% for FAPbI(3) perovskite solar cells, with high device stability and minimal hysteresis effects.

SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Surface redox engineering of vacuum-deposited NiOx for top-performance perovskite solar cells and modules

Minyon Du et al.

Summary: A surface redox engineering (SRE) method is proposed to match vacuum-deposited NiOx with slot-die-coated perovskite films, resulting in high-performance PSCs and perovskite submodules.

JOULE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Versatile Hole Selective Molecules Containing a Series of Heteroatoms as Self-Assembled Monolayers for Efficient p-i-n Perovskite and Organic Solar Cells

Asmat Ullah et al.

Summary: Inverted perovskite solar cells offer advantages such as easy processing and high stability, but face challenges in achieving high power conversion efficiency. This study introduces excellent hole-selective materials for inverted PSCs and demonstrates the potential of engineered self-assembled monolayers (SAMs) in achieving high-performance solar cells. The Se-containing SAM shows the strongest interaction with the perovskite absorber and achieves a PCE of 22.73%.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

Surface reaction for efficient and stable inverted perovskite solar cells

Qi Jiang et al.

Summary: In this study, a reactive surface engineering approach was used to enhance the performance of perovskite solar cells with an inverted structure. The resulting p-i-n solar cells showed a high power conversion efficiency of over 25% and remained stable after long-term operation under extreme conditions.

NATURE (2022)

Add to Collection

Article Chemistry, Physical

Can Nanosecond Laser Achieve High-Performance Perovskite Solar Modules with Aperture Area Efficiency Over 21%?

Yanyan Gao et al.

Summary: This study demonstrates the feasibility of using a nanosecond pulse laser to fabricate high-efficiency perovskite solar modules by reducing the heat-affected zone and improving the interconnection quality to overcome CTM efficiency losses.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A vertically oriented two-dimensional Ruddlesden-Popper phase perovskite passivation layer for efficient and stable inverted perovskite solar cells

Yunseong Choi et al.

Summary: In this study, a highly oriented butylammonium RP perovskite surface passivation layer was developed via vacuum deposition. The passivation layer reduced the trap density of the bulk perovskite and enhanced charge transport, resulting in a power conversion efficiency of 21.4% for vacuum-processed perovskite solar cells. This passivation strategy offers potential for the development of efficient, stable, and scalable perovskite solar cells.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Robust hole transport material with interface anchors enhances the efficiency and stability of inverted formamidinium-cesium perovskite solar cells with a certified efficiency of 22.3%

Rui Chen et al.

Summary: A functionalized poly(triarylamine) was used as the hole transport layer in inverted perovskite solar cells, resulting in improved efficiency and stability.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Engineering of dendritic dopant-free hole transport molecules: enabling ultrahigh fill factor in perovskite solar cells with optimized dendron construction

Wei Chen et al.

Summary: A novel dendritic engineering strategy was utilized to design dopant-free hole-transporting materials (HTMs) for high-performance perovskite solar cells (PVSCs). HTMs MPA-Cz-BTI and MCz-Cz-BTI exhibited improved interfacial contact with the perovskite active layer, resulting in high power conversion efficiencies and ultrahigh fill factors.

SCIENCE CHINA-CHEMISTRY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient Inverted Perovskite Solar Cells with Low Voltage Loss Achieved by a Pyridine-Based Dopant-Free Polymer Semiconductor

Xianglang Sun et al.

Summary: This study presents a new pyridine-based polymer hole-transporting material, PPY2, that can simultaneously reduce non-radiative recombination processes in inverted perovskite solar cells. By using PPY2, the research has successfully improved the performance metrics of PVSCs and achieved good long-term photostability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Multidisciplinary Sciences

Anomalous collapses of Nares Strait ice arches leads to enhanced export of Arctic sea ice

G. W. K. Moore et al.

Summary: Ice arches at the northern and southern ends of Nares Strait, a key passage in the Arctic, are forming for shorter durations, leading to increased ice transport and accelerating the export of multi-year ice.

NATURE COMMUNICATIONS (2021)

Add to Collection

Review Chemistry, Applied

Nickel oxide for inverted structure perovskite solar cells

Fei Ma et al.

Summary: Inverted perovskite solar cells (PSCs) have attracted great attention due to their potential for improving stability. The use of nickel oxide (NiOx) as a hole transporting layer has shown promising results in achieving efficient and stable device performance, with efficiencies over 20%. Further research is ongoing to address current challenges and improve the development of efficient and stable NiOx based PSCs.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Direct Observation on p- to n-Type Transformation of Perovskite Surface Region during Defect Passivation Driving High Photovoltaic Efficiency

Shaobing Xiong et al.

Summary: The use of natural additive capsaicin in perovskite solar cells leads to defect passivation and transformation of surface energetics, resulting in improved charge transport, efficiency, and stability. This approach shows potential for significant enhancement of PSC performance.

JOULE (2021)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Add to Collection

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Black phosphorus doped Poly(triarylamine) as hole transport layer for highly efficient perovskite solar cells

Wei Dong et al.

Summary: In this study, the use of BP:PTAA as hole transport layer in PSCs significantly improved charge extraction and device stability, resulting in higher power conversion efficiency. By enhancing interface properties and optimizing film quality, interfacial charge recombination and trap assisted recombination were successfully suppressed.

ORGANIC ELECTRONICS (2021)

Add to Collection

Article Chemistry, Physical

Scaling-up perovskite solar cells on hydrophobic surfaces

Furkan H. Isikgor et al.

Summary: The challenge of obtaining large-area perovskite solar cells with similar performance to lab-scale ones is largely attributed to a polarity mismatch between the perovskite-precursor solution and the underlying hydrophobic contact materials. By replacing DMSO with NMP in the co-solvent system, the binding energy is profoundly changed, enabling the formation of uniform and dense films over large areas. This work paves the way for the scalability of solution-processed perovskite optoelectronic devices.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Propylammonium Chloride Additive for Efficient and Stable FAPbI3 Perovskite Solar Cells

Yong Zhang et al.

Summary: In this study, n-propylammonium chloride (PACl) is proposed as an alternative to methylammonium chloride (MACl) to improve the stability and efficiency of FAPbI(3)-based perovskite solar cells. The addition of PACl increases perovskite grain size and significantly prolongs carrier lifetime. Compared to MACl, the PACl additive leads to better stability against moisture due to the in situ formed barrier at the bulk perovskite.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Large-Grain Double Cation Perovskites with 18 μs Lifetime and High Luminescence Yield for Efficient Inverted Perovskite Solar Cells

Emilio Gutierrez-Partida et al.

Summary: Recent advancements in perovskite solar cell research have focused on improving efficiency and stability by developing high-quality double cation perovskite materials. The low-bandgap cells exhibited high fill factor and short-circuit current, showcasing reduced charge transport losses. The implied efficiency in the neat material reached 28.4% through minimizing interfacial recombination and optical losses.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Multidisciplinary Sciences

Iodine reduction for reproducible and high-performance perovskite solar cells and modules

Shangshang Chen et al.

Summary: Organic iodide perovskite precursors can be oxidized to I-2, impacting the performance and reproducibility of PSCs, but adding benzylhydrazine hydrochloride can effectively improve the situation. The stabilized efficiency of PSCs has been greatly enhanced after treatment.

SCIENCE ADVANCES (2021)

Add to Collection

Review Chemistry, Multidisciplinary

A Review on Encapsulation Technology from Organic Light Emitting Diodes to Organic and Perovskite Solar Cells

Qian Lu et al.

Summary: Organic light emitting diodes, organic photovoltaics, and perovskite solar cells are vulnerable to degradation induced by moisture and oxygen, requiring robust encapsulation techniques with high barrier performance against these elements for protection. The advantages and disadvantages of various encapsulation technologies and materials, along with their applications in different devices, have been compared. Ongoing challenges and future perspectives in the field of encapsulation have also been addressed.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Cation-size mismatch and interface stabilization for efficient NiOx-based inverted perovskite solar cells with 21.9% efficiency

Yousheng Wang et al.

Summary: The study focuses on the importance of stabilizing perovskite phases and interfaces in stacked perovskite photovoltaics for efficiency and stability. Special A-site cation combinations and interface treatment techniques were used to prepare hysteresis-free, high-efficiency solar cells based on NiOx.

NANO ENERGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Understanding the effect of antisolvent on processing window and efficiency for large-area flexible perovskite solar cells

Cong Chen et al.

Summary: By studying the interaction between solvents and antisolvents in the film preparation process, a new one-step method assisted by antisolvent strategy has been successfully proposed to widen the processing window for fabricating perovskite solar cells, leading to improved power conversion efficiency.

MATERIALS TODAY PHYSICS (2021)

Add to Collection

Article Chemistry, Physical

Insights into Accelerated Degradation of Perovskite Solar Cells under Continuous Illumination Driven by Thermal Stress and Interfacial Junction

Dhruba B. Khadka et al.

Summary: The operational stability of encapsulated halide perovskite solar cells (HaPSCs) is crucial for commercialization. Research shows that degradation mechanisms are related to interface deterioration, bulk decomposition, and formation of voids and PbI2, with NiOx devices exhibiting improved stability due to their immunity to iodine and moisture-resistive properties. Additionally, formation of voids and PbI2 crystallites at columnar intergrains or at the HTL/ HaP interface is identified as the primary cause of device degradation.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

A general approach to high-efficiency perovskite solar cells by any antisolvent

Alexander D. Taylor et al.

Summary: The authors report a general method for fabricating highly efficient perovskite solar cells using any antisolvent by manipulating the application rate. A detailed study of 14 different antisolvents revealed two key factors affecting film quality, leading to power conversion efficiencies exceeding 21% in devices made from a wide range of precursor chemistries.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Multidisciplinary Sciences

Slot-die coating large-area formamidinium-cesium perovskite film for efficient and stable parallel solar module

Zhichun Yang et al.

Summary: This study utilized diphenyl sulfoxide (DPSO) additive to enhance the efficiency and stability of perovskite solar cells, resulting in the successful fabrication of high-efficiency solar modules.

SCIENCE ADVANCES (2021)

Add to Collection

Article Chemistry, Physical

A simple one-step method with wide processing window for high-quality perovskite mini-module fabrication

Hsin-Hsiang Huang et al.

Summary: The study introduced sulfolane as an additive in the perovskite precursor to achieve high-quality and high uniformity crystalline perovskite layers on a large scale, resulting in a record PCE of 16.06%. The encapsulated mini module showed stable performance, retaining about 90% of the initial efficiency after operating under high temperature and extended irradiation for 250 hours.

JOULE (2021)

Add to Collection

Article Chemistry, Physical

Enhanced electrical properties of Li-salts doped mesoporous TiO2 in perovskite solar cells

Minjin Kim et al.

Summary: The study found that the anions of Li-salt dopants affect the electrical properties of ETLs, with Li2CO3 doping leading to deeper conduction bands and higher efficiency in PSCs.

JOULE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Passivation of the Buried Interface via Preferential Crystallization of 2D Perovskite on Metal Oxide Transport Layers

Bin Chen et al.

Summary: By utilizing 2D perovskite post-treatments and passivation layers with organic cations, significant enhancements in performance of perovskite solar cells are observed, including increased open-circuit voltage and reduced surface recombination velocity.

ADVANCED MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Stabilizing perovskite-substrate interfaces for high-performance perovskite modules

Shangshang Chen et al.

Summary: The study found that DMSO liquid additive trapped in perovskite-substrate interfaces during film formation led to voids, accelerating film degradation. Partial replacement of DMSO with solid-state carbohydrazide reduced interfacial voids and increased stability. Blade-coated p-i-n structure PSCs achieved a maximum PCE of 23.6% without efficiency loss after stability tests, demonstrating improved efficiency and stability with the new approach.

SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Co-Evaporated Formamidinium Lead Iodide Based Perovskites with 1000 h Constant Stability for Fully Textured Monolithic Perovskite/Silicon Tandem Solar Cells

Marcel Ross et al.

Summary: Formamidinium iodide (FAI) based perovskite absorbers have shown to be ideal candidates for highly efficient and stable perovskite solar cells. By co-evaporating FAPbI(3) and controlling the composition, stability of the black perovskite phase at room temperature is achieved. The addition of methylammonium iodide (MAI) during the co-evaporation process leads to good absorption properties and high PSC efficiencies, maintaining stability over long periods of operation.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Releasing Nanocapsules for High-Throughput Printing of Stable Perovskite Solar Cells

Zengqi Huang et al.

Summary: A printable and stable perovskite nanocapsules ink has been developed to achieve high-throughput printing of large-area, highly uniform perovskite films with micron grain size. The printed PSCs and 25 cm(2) modules exhibit power conversion efficiencies of 22.10% and 16.12%, respectively.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Sequentially Slot-Die-Coated Perovskite for Efficient and Scalable Solar Cells

Iwan Zimmermann et al.

Summary: This study presents a sequential deposition method for high efficiency triple cation perovskite solar cells, achieving uniform perovskite layers by carefully tuning the ink composition and deposition parameters. The power conversion efficiencies reached up to 19% for small laboratory solar cells and 15.2% for mini-modules, making them among the highest reported efficiencies for slot-die-coated perovskite.

ADVANCED MATERIALS INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

Mitigating the Lead Leakage of High-Performance Perovskite Solar Cells via In Situ Polymerized Networks

Benfang Niu et al.

Summary: By implanting in situ polymerized networks into perovskites, the leakage of lead ions has been successfully mitigated, improving the performance of PSCs.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Energy & Fuels

Defect compensation in formamidinium-caesium perovskites for highly efficient solar mini-modules with improved photostability

Yehao Deng et al.

Summary: The addition of excessive AX in formamidinium-caesium mixed-cation perovskites improves their photostability by compensating iodide vacancies and suppressing ion migration and defects generation during long-term illumination. This approach impedes the generation of hole traps and phase segregation, ultimately enhancing the stability and efficiency of the perovskite mini-modules.

NATURE ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Revealing phase evolution mechanism for stabilizing formamidinium-based lead halide perovskites by a key intermediate phase

Zi-Ang Nan et al.

Summary: This study investigates the phase transition process of FA-based perovskites and identifies a key intermediate, providing insights into the phase evolution and stabilization mechanism. The findings deepen the understanding of the roles of cations and anions in maximizing halogen and cage concentrations, and offer suggestions for fabricating high-performance and stable PCSs by controlling various factors.

CHEM (2021)

Add to Collection

Article Multidisciplinary Sciences

Efficient and stable inverted perovskite solar cells with very high fill factors via incorporation of star-shaped polymer

Qi Cao et al.

Summary: This study introduces a star-shaped polymer to enhance charge transport and inhibit ion migration in perovskite solar cells, leading to improved efficiency and stability. Modified devices demonstrate significant performance enhancements and excellent long-term operational stability.

SCIENCE ADVANCES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Star-polymer multidentate-cross-linking strategy for superior operational stability of inverted perovskite solar cells at high efficiency

Qi Cao et al.

Summary: Metal halide perovskites have gained significant attention for their excellent optoelectronic properties, with the efficiency and stability of perovskite solar cells being major research focuses. The multidentate-cross-linking strategy has successfully enhanced device efficiency and improved operational stability, offering a new direction for commercial applications.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Lessons learned from spiro-OMeTAD and PTAA in perovskite solar cells

Florine M. Rombach et al.

Summary: Organic semiconductors are crucial in thin-film electronic devices, especially as hole transport layers (HTLs) in perovskite solar cells (PSCs). Spiro-OMeTAD and PTAA have been the leading materials for high efficiency HTLs, with research on their properties contributing to a better understanding of their success mechanisms. This review provides key insights into the electronic and morphological properties, doping strategies, and degradation pathways of spiro-OMeTAD and PTAA, guiding the development of future HTL materials with improved stability and efficiency for PSCs.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Review Chemistry, Physical

Inorganic top electron transport layer for high performance inverted perovskite solar cells

Boping Yang et al.

Summary: This review discusses the progress of inorganic top ETL for high-performance inverted PSCs, highlighting the principles and advantages of inorganic ETL, established top ETLs, as well as various fabrication strategies. The review also presents conclusions and future directions for top ETL in inverted PSCs, addressing challenges and potential solutions.

ECOMAT (2021)

Add to Collection

Review Chemistry, Physical

Strategies of modifying spiro-OMeTAD materials for perovskite solar cells: a review

Guanhua Ren et al.

Summary: This review mainly discusses the impact of different doping strategies and mechanisms on device performance and stability in organic-inorganic hybrid perovskite solar cells, along with the development of potential dopants to address stability issues in doped spiro-OMeTAD based PSCs.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Physical

Local Order and Rotational Dynamics in Mixed A-Cation Lead Iodide Perovskites

Giuseppe Fisicaro et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

Add to Collection

Article Multidisciplinary Sciences

Triple-halide wide-band gap perovskites with suppressed phase segregation for efficient tandems

Jixian Xu et al.

SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Impermeable Charge Transport Layers Enable Aqueous Processing on Top of Perovskite Solar Cells

Tobias Gahlmann et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

High Electron Affinity Enables Fast Hole Extraction for Efficient Flexible Inverted Perovskite Solar Cells

Pengbin Ru et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Chemi-Structural Stabilization of Formamidinium Lead Iodide Perovskite by Using Embedded Quantum Dots

Sofia Masi et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Energy & Fuels

Managing grains and interfaces via ligand anchoring enables 22.3%-efficiency inverted perovskite solar cells

Xiaopeng Zheng et al.

NATURE ENERGY (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Scalable fabrication and coating methods for perovskite solar cells and solar modules

Nam-Gyu Park et al.

NATURE REVIEWS MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Boosting the Conversion Efficiency Over 20% in MAPbI3 Perovskite Planar Solar Cells by Employing a Solution-Processed Aluminum-Doped Nickel Oxide Hole Collector

Bhaskar Parida et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Energy & Fuels

Non-Uniform Chemical Corrosion of Metal Electrode of p-i-n Type of Perovskite Solar Cells Caused by the Diffusion of CH3NH3I

Shuxuan Guo et al.

ENERGY TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Gaining Insight into the Effect of Organic Interface Layer on Suppressing Ion Migration Induced Interfacial Degradation in Perovskite Solar Cells

Jiaoyi Ning et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Review Chemistry, Applied

Additives in metal halide perovskite films and their applications in solar cells

Zonghao Liu et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

Multisource Vacuum Deposition of Methylammonium-Free Perovskite Solar Cells

Yu-Hsien Chiang et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

High-Performance Perovskite Single-Junction and Textured Perovskite/Silicon Tandem Solar Cells via Slot-Die-Coating

Anand S. Subbiah et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Overcoming Redox Reactions at Perovskite-Nickel Oxide Interfaces to Boost Voltages in Perovskite Solar Cells

Caleb C. Boyd et al.

JOULE (2020)

Add to Collection

Article Chemistry, Physical

Self-Elimination of Intrinsic Defects Improves the Low-Temperature Performance of Perovskite Photovoltaics

Yihua Chen et al.

JOULE (2020)

Add to Collection

Article Multidisciplinary Sciences

A piperidinium salt stabilizes efficient metal-halide perovskite solar cells

Yen-Hung Lin et al.

SCIENCE (2020)

Add to Collection

Review Chemistry, Physical

Barrier Designs in Perovskite Solar Cells for Long-Term Stability

Shasha Zhang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Teaching an Old Anchoring Group New Tricks: Enabling Low-Cost, Eco-Friendly Hole-Transporting Materials for Efficient and Stable Perovskite Solar Cells

Yang Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Physical

Zwitterionic-Surfactant-Assisted Room-Temperature Coating of Efficient Perovskite Solar Cells

Kuan Liu et al.

JOULE (2020)

Add to Collection

Article Multidisciplinary Sciences

Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction

Amran Al-Ashouri et al.

SCIENCE (2020)

Add to Collection

Article Multidisciplinary Sciences

Chemical anti-corrosion strategy for stable inverted perovskite solar cells

Xiaodong Li et al.

SCIENCE ADVANCES (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Efficiency progress of inverted perovskite solar cells

Xuesong Lin et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Energy & Fuels

Dynamic Antisolvent Engineering for Spin Coating of 10 x 10 cm2 Perovskite Solar Module Approaching 18%

Tongle Bu et al.

SOLAR RRL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A universal solution processed interfacial bilayer enabling ohmic contact in organic and hybrid optoelectronic devices

Joel Troughton et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Alkali Chlorides for the Suppression of the Interfacial Recombination in Inverted Planar Perovskite Solar Cells

Wei Chen et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Hole-transporting layer based on a conjugated polyelectrolyte with organic cations enables efficient inverted perovskite solar cells

Luozheng Zhang et al.

NANO ENERGY (2019)

Add to Collection

Article Multidisciplinary Sciences

Bilateral alkylamine for suppressing charge recombination and improving stability in blade-coated perovskite solar cells

Wu-Qiang Wu et al.

SCIENCE ADVANCES (2019)

Add to Collection

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Dopant-Free Small-Molecule Hole-Transporting Material for Inverted Perovskite Solar Cells with Efficiency Exceeding 21%

Yang Wang et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

On the Relation between the Open-Circuit Voltage and Quasi-Fermi Level Splitting in Efficient Perovskite Solar Cells

Pietro Caprioglio et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Thermally stable methylammonium-free inverted perovskite solar cells with Zn2+ doped CuGaO2 as efficient mesoporous hole-transporting layer

Yu Chen et al.

NANO ENERGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient and Stable Inverted Perovskite Solar Cells Incorporating Secondary Amines

Hao Chen et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Achieving efficient inverted planar perovskite solar cells with nondoped PTAA as a hole transport layer

Qian Zhao et al.

ORGANIC ELECTRONICS (2019)

Add to Collection

Article Chemistry, Physical

Interfacial engineering of front-contact with finely tuned polymer interlayers for high-performance large-area flexible perovskite solar cells

Zhiliang Liu et al.

NANO ENERGY (2019)

Add to Collection

Article Chemistry, Physical

Precursor Engineering for a Large-Area Perovskite Solar Cell with >19% Efficiency

Do-Kyoung Lee et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Multidisciplinary Sciences

Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide

Hanul Min et al.

SCIENCE (2019)

Add to Collection

Article Chemistry, Applied

The fabrication of homogeneous perovskite films on non-wetting interfaces enabled by physical modification

Jiang You et al.

JOURNAL OF ENERGY CHEMISTRY (2019)

Add to Collection

Article Chemistry, Physical

Engineering Green-to-Blue Emitting CsPbBr3 Quantum-Dot Films with Efficient Ligand Passivation

Maowei Jiang et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Multidisciplinary Sciences

Double-slit photoelectron interference in strong-field ionization of the neon dimer

Maksim Kunitski et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Multidisciplinary Sciences

Tailoring solvent coordination for high-speed, room-temperature blading of perovskite photovoltaic films

Yehao Deng et al.

SCIENCE ADVANCES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

20.7% highly reproducible inverted planar perovskite solar cells with enhanced fill factor and eliminated hysteresis

Xixia Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Conformal monolayer contacts with lossless interfaces for perovskite single junction and monolithic tandem solar cells

Amran Al-Ashouri et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Methylammonium Chloride Induces Intermediate Phase Stabilization for Efficient Perovskite Solar Cells

Minjin Kim et al.

JOULE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

The impact of energy alignment and interfacial recombination on the internal and external open-circuit voltage of perovskite solar cells

Martin Stolterfoht et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Efficient Perovskite Solar Cell Modules with High Stability Enabled by Iodide Diffusion Barriers

Enbing Bi et al.

JOULE (2019)

Add to Collection

Article Chemistry, Physical

Thermal degradation of formamidinium based lead halide perovskites into sym-triazine and hydrogen cyanide observed by coupled thermogravimetry-mass spectrometry analysis

Emilio J. Juarez-Perez et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Multidisciplinary

[6,6]-Phenyl-C-61-Butyric Acid Methyl Ester/Cerium Oxide Bilayer Structure as Efficient and Stable Electron Transport Layer for Inverted Perovskite Solar Cells

Rui Fang et al.

ACS NANO (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Perovskite Solar Cells with Inorganic Electron- and Hole-Transport Layers Exhibiting Long-Term (≈500 h) Stability at 85 °C under Continuous 1 Sun Illumination in Ambient Air

Seongrok Seo et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Molecule-Doped Nickel Oxide: Verified Charge Transfer and Planar Inverted Mixed Cation Perovskite Solar Cell

Wei Chen et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Improving the efficiency and environmental stability of inverted planar perovskite solar cells via silver-doped nickel oxide hole-transporting layer

Ying Wei et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Mixed A-Cation Perovskites for Solar Cells: Atomic-Scale Insights Into Structural Distortion, Hydrogen Bonding, and Electronic Properties

Dibyajyoti Ghosh et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Tuning Molecular Interactions for Highly Reproducible and Efficient Formamidinium Perovskite Solar Cells via Adduct Approach

Jin-Wook Lee et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Sputtered indium zinc oxide rear electrodes for inverted semitransparent perovskite solar cells without using a protective buffer layer

Tina Wahl et al.

ORGANIC ELECTRONICS (2018)

Add to Collection

Article Chemistry, Physical

High-Performance Multilayer Encapsulation for Perovskite Photovoltaics

Michael Wong-Stringer et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Understanding the Doping Effect on NiO: Toward High-Performance Inverted Perovskite Solar Cells

Wei Chen et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Extending the Continuous Operating Lifetime of Perovskite Solar Cells with a Molybdenum Disulfide Hole Extraction Interlayer

George Kakavelakis et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Low-Temperature Solution-Processed CuCrO2 Hole-Transporting Layer for Efficient and Photostable Perovskite Solar Cells

Hua Zhang et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Comparison of processing windows and electronic properties between CH3NH3PbI3 perovskite fabricated by one-step and two-step solution processes

Menglin Li et al.

ORGANIC ELECTRONICS (2018)

Add to Collection

Article Chemistry, Physical

Self-Assembled Hole Transporting Monolayer for Highly Efficient Perovskite Solar Cells

Artiom Magomedov et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

The introduction of a perovskite seed layer for high performance perovskite solar cells

Jaeki Jeong et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Energy & Fuels

Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells

Martin Stolterfoht et al.

NATURE ENERGY (2018)

Add to Collection

Article Multidisciplinary Sciences

Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture

Silver-Hamill Turren-Cruz et al.

SCIENCE (2018)

Add to Collection

Article Multidisciplinary Sciences

Universal passivation strategy to slot-die printed SnO2 for hysteresis-free efficient flexible perovskite solar module

Tongle Bu et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Physical

Poly(3,4-Ethylenedioxythiophene): Methylnaphthalene Sulfonate Formaldehyde Condensate: The Effect of Work Function and Structural Homogeneity on Hole Injection/ Extraction Properties

Yuda Li et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Energy & Fuels

Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells

Qi Jiang et al.

NATURE ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

The synergistic effect of H2O and DMF towards stable and 20% efficiency inverted perovskite solar cells

Chien-Hung Chiang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Article Energy & Fuels

Selection of anti-solvent and optimization of dropping volume for the preparation of large area sub-module perovskite solar cells

Kun-Mu Lee et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)

Add to Collection

Article Multidisciplinary Sciences

Suppressed decomposition of organometal halide perovskites by impermeable electron-extraction layers in inverted solar cells

K. O. Brinkmann et al.

NATURE COMMUNICATIONS (2017)

Add to Collection

Article Chemistry, Physical

Cesium Doped NiOx as an Efficient Hole Extraction Layer for Inverted Planar Perovskite Solar Cells

Wei Chen et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of BCP buffer layer on eliminating charge accumulation for high performance of inverted perovskite solar cells

Chuanliang Chen et al.

RSC ADVANCES (2017)

Add to Collection

Article Energy & Fuels

Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations

Xiaopeng Zheng et al.

NATURE ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Planar-Structure Perovskite Solar Cells with Efficiency beyond 21%

Qi Jiang et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Metal Acetylacetonate Series in Interface Engineering for Full Low-Temperature-Processed, High-Performance, and Stable Planar Perovskite Solar Cells with Conversion Efficiency over 16% on 1 cm2 Scale

Wei Chen et al.

ADVANCED MATERIALS (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Organic-inorganic hybrid lead halide perovskites for optoelectronic and electronic applications

Yixin Zhao et al.

CHEMICAL SOCIETY REVIEWS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient vacuum deposited p-i-n and n-i-p perovskite solar cells employing doped charge transport layers

Cristina Momblona et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Entropic stabilization of mixed A-cation ABX(3) metal halide perovskites for high performance perovskite solar cells

Chenyi Yi et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency

Michael Saliba et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Multidisciplinary Sciences

A vacuum flash-assisted solution process for high-efficiency large-area perovskite solar cells

Xiong Li et al.

SCIENCE (2016)

Add to Collection

Article Multidisciplinary Sciences

A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells

David P. McMeekin et al.

SCIENCE (2016)

Add to Collection

Article Energy & Fuels

Correlation of energy disorder and open-circuit voltage in hybrid perovskite solar cells

Yuchuan Shao et al.

NATURE ENERGY (2016)

Add to Collection

Article Energy & Fuels

Perovskite solar cells with 18.21% efficiency and area over 1 cm2 fabricated by heterojunction engineering

Yongzhen Wu et al.

NATURE ENERGY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Vacuum-Assisted Thermal Annealing of CH3NH3PbI3 for Highly Stable and Efficient Perovskite Solar Cells

Feng Xian Xie et al.

ACS NANO (2015)

Add to Collection

Article Chemistry, Multidisciplinary

High efficiency stable inverted perovskite solar cells without current hysteresis

Chun-Guey Wu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Hybrid interfacial layer leads to solid performance improvement of inverted perovskite solar cells

Wei Chen et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

High-Efficiency Colloidal Quantum Dot Photovoltaics via Robust Self-Assembled Mono layers

Gi-Hwan Kim et al.

NANO LETTERS (2015)

Add to Collection

Article Multidisciplinary Sciences

Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers

Wei Chen et al.

SCIENCE (2015)

Add to Collection

Article Multidisciplinary Sciences

High-performance photovoltaic perovskite layers fabricated through intramolecular exchange

Woon Seok Yang et al.

SCIENCE (2015)

Add to Collection

Article Multidisciplinary Sciences

Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells

Cheng Bi et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Chemistry, Physical

Formamidinium and Cesium Hybridization for Photo- and Moisture-Stable Perovskite Solar Cell

Jin-Wook Lee et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite

Bert Conings et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

Doped hole transport layer for efficiency enhancement in planar heterojunction organolead trihalide perovskite solar cells

Qi Wang et al.

NANO ENERGY (2015)

Add to Collection

Article Chemistry, Physical

High-Efficiency Solution-Processed Planar Perovskite Solar Cells with a Polymer Hole Transport Layer

Dewei Zhao et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Solvent Annealing of Perovskite-Induced Crystal Growth for Photovoltaic-Device Efficiency Enhancement

Zhengguo Xiao et al.

ADVANCED MATERIALS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

A Fast Deposition-Crystallization Procedure for Highly Efficient Lead Iodide Perovskite Thin-Film Solar Cells

Manda Xiao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Benefits of very thin PCBM and LiF layers for solution-processed p-i-n perovskite solar cells

Jangwon Seo et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells

Nam Joong Jeon et al.

NATURE MATERIALS (2014)

Add to Collection

Editorial Material Optics

Utrathin PV Device is Highly Efficient

[Anonymous]

PHOTONICS SPECTRA (2014)

Add to Collection

Article Chemistry, Physical

Gas-assisted preparation of lead iodide perovskite films consisting of a monolayer of single crystalline grains for high efficiency planar solar cells

Fuzhi Huang et al.

NANO ENERGY (2014)

Add to Collection

Article Chemistry, Multidisciplinary

CH3NH3PbI3 Perovskite/Fullerene Planar-Heterojunction Hybrid Solar Cells

Jun-Yuan Jeng et al.

ADVANCED MATERIALS (2013)

Add to Collection

Article Multidisciplinary Sciences

Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites

Michael M. Lee et al.

SCIENCE (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.