☆ 4.6 Article

Confinement of MACl guest in 2D ZIF-8 triggers interface and bulk passivation for efficient and UV-stable perovskite solar cells

JOURNAL OF MATERIALS CHEMISTRY C (2023)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Dual passivation of SnO2/Perovskite heterogeneous interfacial defects for efficient perovskite solar cells

Yutian Xu et al.

Summary: This study presents a heterointerface engineering strategy using reduced L-glutathione (GSH) as a multifunctional molecule to improve the efficiency and stability of perovskite solar cells (PSCs). The introduction of GSH improves the crystallization of SnO2, enhances the affinity between SnO2 and perovskite, and passivates the defects at the heterogeneous interfaces while accelerating electron transport. The PSCs based on the GSH-SnO2 layer achieve a significantly increased power conversion efficiency (PCE) of 21.66% with no noticeable hysteresis and exhibit better environmental stability.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Myth behind Metastable and Stable n-Hexylammonium Bromide- Based Low-Dimensional Perovskites

Yingping Fan et al.

Summary: In this study, the physical and chemical properties of an n-hexylammonium bromide (HABr)-based lowdimensional perovskite were investigated. It was discovered that a new fluxional ligand ion, HA2PbI2Br2, can be used as a stable and efficient surface modifier to enhance the stability and efficiency of photovoltaic devices.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2023)

Add to Collection

Article Chemistry, Physical

Boosted charge extraction of SnO2 nanorod arrays via nanostructural and surface chemical engineering for efficient and stable perovskite solar cells

Yutian Xu et al.

Summary: This study significantly improves the performance of SnO2 NRAs ETL in perovskite solar cells through microstructural and surface chemical engineering, achieving a record PCE of 20.18%.

APPLIED SURFACE SCIENCE (2023)

Add to Collection

Article Engineering, Environmental

Hypervalent potassium xanthate modified SnO2 for highly efficient perovskite solar modules

Pin Lv et al.

Summary: In this study, tin oxide is modified to enhance the efficiency of perovskite solar cells. The modification method reduces interfacial defects and improves charge transfer. The modified solar cells showed a power conversion efficiency of 23.4% and stable performance even after aging for 600 hours.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Interfacial Modification via a 1,4-Butanediamine-Based 2D Capping Layer for Perovskite Solar Cells with Enhanced Stability and Efficiency

Xiaojie Wang et al.

Summary: Introducing diammonium cations in constructing 3D/2D stacked perovskite solar cells can enhance photovoltaic efficiency and environmental stability. The 2D capping layer passivates surface defects, suppresses nonradiative recombination, and regulates energy level arrangement. Additionally, the method improves water resistance of perovskites.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Symmetrical Acceptor-Donor-Acceptor Molecule as a Versatile Defect Passivation Agent toward Efficient FA0.85MA0.15PbI3 Perovskite Solar Cells

Wenjing Zhao et al.

Summary: This study adopts an organic acceptor-donor-acceptor (A-D-A) molecule called IDT-OD as a defect passivation agent to improve the efficiency and stability of perovskite solar cells (PSCs). The symmetrical double arms structure of IDT-OD molecule helps to form a superior perovskite layer, resulting in enhanced performance of the cells.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Improving Contact and Passivation of Buried Interface for High-Efficiency and Large-Area Inverted Perovskite Solar Cells

Xiaojia Xu et al.

Summary: By molecular engineering the structure of PTAA and designing multifunctional pyridine units, this study improved the performance of HTMs and inverted-structured PSCs. Optimization of hydrophilicity and passivation efficacy was achieved by controlling the linking-site and chemical structure of the pyridine unit, leading to enhanced efficiency of the PSCs.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

CsI Enhanced Buried Interface for Efficient and UV-Robust Perovskite Solar Cells

Hang Xu et al.

Summary: By utilizing CsI-SnO2 complex as the buried interface for the electron transport layer, an effective strategy for enhancing the efficiency and stability of perovskite solar cells has been achieved. CsI modification facilitates perovskite film growth and defect passivation, while the gradient distribution of Cs+ contributes to suitable band alignment and enhanced resistance to UV exposure, resulting in significantly improved power conversion efficiency and UV stability for FAPbI(3)-based PSCs.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Environmental Sciences

Enhanced NO2 gas-sensing performance by core-shell SnO2/ZIF-8 nanospheres

Mengmeng Zhan et al.

Summary: Timely detection of harmful, poisonous, and air pollutant gases is crucial for protecting humans from exposure to severe gas levels. Gas-sensing devices based on sphere-like porous SnO2/ZIF-8 nanocomposites provide high surface area, porosity, and active sites for excellent responses in metal oxide gas sensors. The engineered gas sensors show excellent sensing sensitivity, rapid response and recovery times, and favorable selectivity for NO2 gases. Therefore, NO2 gas sensors based on core-shell SnO2/ZIF-8 nanospheres have promising applications in industrial settings.

CHEMOSPHERE (2022)

Add to Collection

Article Chemistry, Physical

Chlorobenzenesulfonic Potassium Salts as the Efficient Multifunctional Passivator for the Buried Interface in Regular Perovskite Solar Cells

Yao Dong et al.

Summary: This study presents a novel agent for modifying the interface properties of perovskite solar cells, resulting in improved efficiency and stability. The agent interacts with the surface of SnO2, filling oxygen vacancies and reducing defect density. The modified devices exhibit efficient charge extraction and transport, leading to high conversion efficiency and stability.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

A Multifunctional Fluorinated Polymer Enabling Efficient MAPbI3-Based Inverted Perovskite Solar Cells

Ming Luo et al.

Summary: By exploring the new polymer material BN-12, the defects of Pb2+ and MA+ in the p-i-n structure can be effectively passivated, leading to improved efficiency and long-term stability of perovskite solar cells.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Fast Charge Transfer and High Stability via Hybridization of Hygroscopic Cu-BTC Metal-Organic Framework Nanocrystals with a Light-Absorbing Layer for Perovskite Solar Cells

Jiyoung Lee et al.

Summary: This study presents a strategy to achieve moisture-stable perovskite solar cells (PSCs) by hybridizing hygroscopic metal-organic frameworks with a light-absorbing perovskite layer. This hybridization enhances perovskite crystallization and facilitates the transfer of photoexcited electrons, resulting in high power conversion efficiency and long-term stability.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Robust Interfacial Modifier for Efficient Perovskite Solar Cells: Reconstruction of Energy Alignment at Buried Interface by Self-Diffusion of Dopants

Lipeng Wang et al.

Summary: This study reports the use of self-diffusion interfacial doping with ionic potassium L-aspartate to restrain carrier trap induced recombination in perovskite solar cells. The diffusion of potassium ions into the perovskite film provides an n-doping effect, leading to improved carrier transport efficiency and energy level alignment. The modified devices achieved high power conversion efficiency and enhanced stability.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Asymmetric organic diammonium salt buried in SnO2 layer enables fast carrier transfer and interfacial defects passivation for efficient perovskite solar cells

Hongru Ma et al.

Summary: Reasonably passivating interfacial defects and reducing non-radiative recombination are effective strategies to improve the efficiency and stability of perovskite solar cells. In this study, the burying of a suitable ammonium salt in the electron transport layer was found to enhance the electron mobility, optimize the energy level arrangement, and improve the crystallinity of the perovskite layer. As a result, the power conversion efficiency of the solar cells was significantly improved, and their operational stability was enhanced.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Low-cost and easily prepared interface layer towards efficient and negligible hysteresis perovskite solar cells

Wei Wu et al.

Summary: In this study, high-performance perovskite solar cells (PSCs) with matched energy level alignment and minimal non-radiative recombination at the buried perovskite/charge transport material interface were successfully fabricated by inserting a CsTFSI interlayer. The CsTFSI modification improved the interface properties between the charge transport material and perovskite, leading to a considerable increase in power conversion efficiency (PCE) of the devices.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Defect passivation and electrical conductivity enhancement in perovskite solar cells using functionalized graphene quantum dots

Yichuan Rui et al.

Summary: By incorporating single-crystalline graphene quantum dots into perovskite films, defect states can be effectively passivated, resulting in improved electrical conductivities, enhanced morphology quality, fast carrier separation and transport, and enhanced photovoltaic parameters and power conversion efficiency (PCE). This approach provides a new insight into defect passivation in perovskites for achieving higher photovoltaic performances.

MATERIALS FUTURES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Two-dimensional SnS2 nanosheets as electron transport and interfacial layers enable efficient perovskite solar cells

Yichuan Rui et al.

Summary: In this study, 2D SnS2 nanosheets were prepared as low-temperature processed ETLs for PSCs, showing excellent performance. When used as sole ETLs, SnS2 nanosheets can improve the energy conversion efficiency of PSCs, and as an interfacial modifier for traditional SnO2 ETL, they enhance the performance and stability of PSCs.

JOURNAL OF MATERIALS CHEMISTRY C (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Imidazole additives in 2D halide perovskites: impacts of -CN versus -CH3 substituents reveal the mediation of crystal growth by phase buffering

Shuang Yu et al.

Summary: In this paper, highly ordered lattice arrangements in 2D lead halide perovskites were achieved using the 4,5-dicyanoimidazole (DCI) additive. Through a series of characterization methods, the epitaxial growth of multi-phases was revealed, which effectively reduced trap density and prolonged carrier lifetime.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Buried Interfaces in Halide Perovskite Photovoltaics

Xiaoyu Yang et al.

Summary: Research has shown that losses at buried interfaces in perovskite photovoltaics are mainly caused by sub-microscale extended imperfections and lead-halide inhomogeneities, which are major obstacles to improving device performance. By utilizing passivation molecules for microstructural reconstruction, these losses can be significantly reduced, unlocking the full potential for enhancing device performance.

ADVANCED MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Aqueous One-Step Modulation for Synthesizing Monodispersed ZIF-8 Nanocrystals for Mixed-Matrix Membrane

Xu Jiang et al.

Summary: In this study, a method was developed to synthesize monodispersed ZIF-8 nanocrystals with unique dopamine surface decoration layer in situ, which went through a triple-stage crystallization process to form a rhombic dodecahedron structure. The resulting ZIF-8-DA nanocrystals maintained their crystallinity and abundant microporosity, leading to enhanced gas permeability and selectivity in mixed-matrix membranes.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Two-Dimensional Metal-Organic Frameworks-Based Grain Termination Strategy Enables High-Efficiency Perovskite Photovoltaics with Enhanced Moisture and Thermal Stability

Lele Qiu et al.

Summary: Efficient and stable grain passivation in perovskite films is achieved by preparing formic acid-functionalized 2D metal-organic frameworks (MOFs) as the terminated agent, leading to improved performance and stability of perovskite solar cells.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Tin Oxide Electron-Selective Layers for Efficient, Stable, and Scalable Perovskite Solar Cells

Cesur Altinkaya et al.

Summary: Tin oxide (SnO2) has emerged as a promising alternative to electron-selective layers (ESLs) in perovskite solar cells (PSCs), offering advantages such as high optical transmission, high carrier mobility, and low-temperature processability. It has the potential to play a key role in large-scale deployment and manufacturing.

ADVANCED MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Solvent Engineering of the Precursor Solution toward Large-Area Production of Perovskite Solar Cells

Lingfeng Chao et al.

Summary: Solar cells based on emerging organic-inorganic hybrid perovskite materials have achieved impressive power conversion efficiency, but challenges remain in producing industrial-scale cells through solution methods. Advanced progress has been made in solvent engineering to regulate coordination and reduce toxicity of precursor solutions, showing promising prospects for future industrial production of high-performance cells.

ADVANCED MATERIALS (2021)

Add to Collection

Article Energy & Fuels

Solvent-Additive Engineering-Assisted Improvement of Interface Contact for Producing Highly Efficient Inverted Perovskite Solar Cells

Fan Zhang et al.

Summary: By employing solvent-additive engineering with different classes of solvents, interface contact issues in inverted perovskite solar cells can be improved, leading to a high-quality perovskite layer and enhanced efficiency.

SOLAR RRL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Universal Bottom Contact Modification with Diverse 2D Spacers for High-Performance Inverted Perovskite Solar Cells

Jun Li et al.

Summary: This study investigates the effect of different 2D spacers on the bottom interface of inverted p-i-n PVSCs, revealing a significant improvement in efficiency and stability after optimization, attributed to the formation of 2D/3D heterojunction and related mechanisms. Additionally, the unencapsulated devices demonstrate excellent stability with 90% retention of initial efficiency after storage under ambient conditions.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Programmable Logic in Metal-Organic Frameworks for Catalysis

Yu Shen et al.

Summary: Metal-organic frameworks (MOFs) are widely studied in catalysis due to their flexible components, high surface area, and uniform active sites. However, the complex structures of MOFs pose challenges for researchers in selecting suitable catalysts. A programmable design strategy based on metal ions, organic ligands, modifiers, and post-treatment modules is proposed to design MOF catalysts for various reactions, enabling precise construction and regulation of their microenvironments for heterogeneous catalysis, electrocatalysis, and photocatalysis. This modular design concept offers a potent tool for exploring structure-activity relationships and accelerating the tailored design of multicomponent catalysts.

ADVANCED MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Multimodal host-guest complexation for efficient and stable perovskite photovoltaics

Hong Zhang et al.

Summary: The study adopted a multimodal host-guest complexation strategy to enhance the stability and optoelectronic properties of formamidinium lead iodide perovskites, resulting in high-efficiency and high-stability solar cells. This supramolecular approach demonstrates the broad applications of host-guest chemistry in photovoltaics.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Energy & Fuels

Optimizing Vertical Crystallization for Efficient Perovskite Solar Cells by Buried Composite Layers

Xiaoyu Yang et al.

Summary: A new buried contact using graphitic carbon nitride and tin oxide has been reported to optimize the electron-transporting layer in planar-heterojunction perovskite solar cells. By manipulating the vertical composition and crystallinity of the top perovskite film, the efficiency of the PSCs has been improved.

SOLAR RRL (2021)

Add to Collection

Article Chemistry, Physical

Grain Size and Interface Modification via Cesium Carbonate Post-Treatment for Efficient SnO2-Based Planar Perovskite Solar Cells

Tianpeng Li et al.

Summary: Cesium carbonate (Cs2CO3) modification improves the electronic properties of tin dioxide (SnO2) electron transport layer (ETL), reducing surface roughness and enhancing surface wettability to promote larger perovskite grains. It lowers film work function, accelerates electron transfer, and suppresses carrier recombination, leading to significantly enhanced power conversion efficiency. Additionally, optimization of both perovskites and perovskite/SnO2 interfaces effectively suppresses device hysteresis.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Depth-dependent defect manipulation in perovskites for high-performance solar cells

Yuzhuo Zhang et al.

Summary: A depth-dependent manipulation strategy is demonstrated to concurrently modulate the bulk and interfacial defects in perovskite films, resulting in improved efficiency of PSCs. This strategy provides new insights into spatial defect modulation and may open up promising ways for defect modulator design for highly efficient perovskite optoelectronic devices.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Nondestructive passivation of the TiO2 electron transport layer in perovskite solar cells by the PEIE-2D MOF interfacial modified layer

Jun Ji et al.

Summary: The microstructure of the positive electrode material of lithium nickelate is closely related to its performance, with factors such as impurities, crystal morphology, grain size, and lattice distortion directly affecting the material's properties. Therefore, it is of great significance to rationally design and control its microstructure.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Formation of C-X Bonds in CO2 Chemical Fixation Catalyzed by Metal-Organic Frameworks

Sheng-Li Hou et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Spray-coated monodispersed SnO2 microsphere films as scaffold layers for efficient mesoscopic perovskite solar cells

Xinyi Fan et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Review Chemistry, Physical

Additive Engineering for Efficient and Stable Perovskite Solar Cells

Fei Zhang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

MACl-Induced Intermediate Engineering for High-Performance Mixed-Cation Perovskite Solar Cells

Muhammad Mateen et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Review Chemistry, Multidisciplinary

High-Efficiency Perovskite Solar Cells

Jin Young Kim et al.

CHEMICAL REVIEWS (2020)

Add to Collection

Article Chemistry, Physical

Anatase TiO2 nanorod arrays as high-performance electron transport layers for perovskite solar cells

Tianpeng Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Chemistry, Physical

Solution-processed p-type nanocrystalline CoO films for inverted mixed perovskite solar cells

Bin Li et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

Add to Collection

Article Engineering, Chemical

Surface Molecular Separator for Selective Gas Sensing

Pil Gyu Choi et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Add to Collection

Article Nanoscience & Nanotechnology

2D metal-organic framework for stable perovskite solar cells with minimized lead leakage

Shengfan Wu et al.

NATURE NANOTECHNOLOGY (2020)

Add to Collection

Article Energy & Fuels

Tailoring the Grain Boundaries of Wide-Bandgap Perovskite Solar Cells by Molecular Engineering

Khalid Emshadi et al.

SOLAR RRL (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Enhancing the Efficiency and Stability of Triple-Cation Perovskite Solar Cells by Eliminating Excess PbI2 from the Perovskite/Hole Transport Layer Interface

Zhelu Hu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Functional metal-organic frameworks as effective sensors of gases and volatile compounds

Hai-Yang Li et al.

CHEMICAL SOCIETY REVIEWS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Conjugated Polymer-Assisted Grain Boundary Passivation for Efficient Inverted Planar Perovskite Solar Cells

Wei Chen et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Add to Collection

Article Chemistry, Physical

Spontaneous Interface Ion Exchange: Passivating Surface Defects of Perovskite Solar Cells with Enhanced Photovoltage

Zhipeng Li et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

HRP@ZIF-8/DNA Hybrids: Functionality Integration of ZIF-8 via Biomineralization and Surface Absorption

Lei Wang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Stable Metal-Organic Frameworks: Design, Synthesis, and Applications

Shuai Yuan et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Plant Sunscreen and Co(II)/(III) Porphyrins for UV-Resistant and Thermally Stable Perovskite Solar Cells: From Natural to Artificial

Jing Cao et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Metal-organic frameworks at interfaces of hybrid perovskite solar cells for enhanced photovoltaic properties

Deli Shen et al.

CHEMICAL COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Assembly of ZIF-67 Metal-Organic Framework over Tin Oxide Nanoparticles for Synergistic Chemiresistive CO2 Gas Sensing

Marilyn Esclance DMello et al.

CHEMISTRY-A EUROPEAN JOURNAL (2018)

Add to Collection

Correction Chemistry, Physical

Doping of [In2(phen)3Cl6]•CH3CN•2H2O Indium-Based Metal-Organic Framework into Hole Transport Layer for Enhancing Perovskite Solar Cell Efficiencies (vol 8, 1702052, 2018)

Mengru Li et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Zinc ion as effective film morphology controller in perovskite solar cells

Renjie Chen et al.

SUSTAINABLE ENERGY & FUELS (2018)

Add to Collection

Article Chemistry, Physical

SnO2 nanorod arrays with tailored area density as efficient electron transport layers for perovskite solar cells

Xiaokun Zhang et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Enzyme Encapsulation in Mesoporous Metal-Organic Frameworks for Selective Biodegradation of Harmful Dye Molecules

Effrosyni Gkaniatsou et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Article Chemistry, Physical

Understanding the Photochemical Response of Zeolitic Imidazolate Framework-8 in the Sight of Framework, Uncoordinated 2-Methylimidazole and ZnxOy Clusters

Tianyu Du et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Add to Collection

Article Multidisciplinary Sciences

Efficient and stable solution-processed planar perovskite solar cells via contact passivation

Hairen Tan et al.

SCIENCE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Direct white-light-emitting and near-infrared phosphorescence of zeolitic imidazolate framework-8

Xiaogang Yang et al.

CHEMICAL COMMUNICATIONS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Efficiency and Stability of Inverted Perovskite Solar Cells Using Highly Crystalline SnO2 Nanocrystals as the Robust Electron-Transporting Layer

Zonglong Zhu et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Air-Stable, Efficient Mixed-Cation Perovskite Solar Cells with Cu Electrode by Scalable Fabrication of Active Layer

Yehao Deng et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Planar Heterojunction Perovskite Solar Cells Incorporating Metal-Organic Framework Nanocrystals

Ting-Hsiang Chang et al.

ADVANCED MATERIALS (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Metal-organic framework membranes: from synthesis to separation application

Shilun Qiu et al.

CHEMICAL SOCIETY REVIEWS (2014)

Add to Collection

Article Nanoscience & Nanotechnology

CAF@ZIF-8: One-Step Encapsulation of Caffeine in MOF

Nuria Liedana et al.

ACS APPLIED MATERIALS & INTERFACES (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Role of solvents in coordination supramolecular systems

Cheng-Peng Li et al.

CHEMICAL COMMUNICATIONS (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.