Related references
Note: Only part of the references are listed.A novel energy evaluation approach of machining processes based on data analysis
Ma Feng et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2023)
An Enhanced Social Engineering Optimizer for Solving an Energy-Efficient Disassembly Line Balancing Problem Based on Bucket Brigades and Cloud Theory
Guangdong Tian et al.
IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2023)
Performance analysis and multi-objective optimization of bionic dendritic furcal energy-absorbing structures for trains
Yong Peng et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)
A survey of multi-criteria decision-making techniques for green logistics and low-carbon transportation systems
Guangdong Tian et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2023)
Capacitated multi-objective disassembly scheduling with fuzzy processing time via a fruit fly optimization algorithm
Gang Yuan et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)
The combined social engineering particle swarm optimization for real-world engineering problems: A case study of model-based structural health monitoring
Nizar Faisal Alkayem et al.
APPLIED SOFT COMPUTING (2022)
Stochastic Hybrid Discrete Grey Wolf Optimizer for Multi-Objective Disassembly Sequencing and Line Balancing Planning in Disassembling Multiple Products
Xiwang Guo et al.
IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2022)
Multi-objective scheduling of priority-based rescue vehicles to extinguish forest fires using a multi-objective discrete gravitational search algorithm
Guangdong Tian et al.
INFORMATION SCIENCES (2022)
Inverse Analysis of Structural Damage Based on the Modal Kinetic and Strain Energies with the Novel Oppositional Unified Particle Swarm Gradient-Based Optimizer
Nizar Faisal Alkayem et al.
APPLIED SCIENCES-BASEL (2022)
Development of an Improved Water Cycle Algorithm for Solving an Energy-Efficient Disassembly-Line Balancing Problem
Xuesong Zhang et al.
PROCESSES (2022)
Recycling of spent Lithium-ion Batteries: A comprehensive review for identification of main challenges and future research trends
Guangdong Tian et al.
SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2022)
A novel energy efficiency grade evaluation approach for machining systems based on inherent energy efficiency
Feng Ma et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2021)
A hybrid approach based on MCDM methods and Monte Carlo simulation for sustainable evaluation of potential solar sites in east of Iran
Devika Kannan et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Scheme selection of design for disassembly (DFD) based on sustainability: A novel hybrid of interval 2-tuple linguistic intuitionistic fuzzy numbers and regret theory
Wenjie Wang et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Multiobjective optimization of machining center process route: Tradeoffs between energy and cost
Yongmao Xiao et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Feasibility study of integrating the renewable energy system in Popova Island using the Monte Carlo model and HOMER
Laetitia Uwineza et al.
ENERGY STRATEGY REVIEWS (2021)
Pricing and coordination of waste electrical and electronic equipment under third-party recycling in a closed-loop supply chain
Yong Liu et al.
ENVIRONMENT DEVELOPMENT AND SUSTAINABILITY (2021)
A novel approach to CNC machining center processing parameters optimization considering energy-saving and low-cost
Yongmao Xiao et al.
JOURNAL OF MANUFACTURING SYSTEMS (2021)
Disassembly Sequence Planning for Intelligent Manufacturing Using Social Engineering Optimizer
Cheng Zhang et al.
SYMMETRY-BASEL (2021)
A fast branch, bound and remember algorithm for disassembly line balancing problem
Zixiang Li et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2020)
3D-based multi-objective cooperative disassembly sequence planning method for remanufacturing
Xuhui Xia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Robotic disassembly line balancing problem: A mathematical model and ant colony optimization approach
Zeynel Abidin Cil et al.
APPLIED MATHEMATICAL MODELLING (2020)
Multiobjective Bike Repositioning in Bike-Sharing Systems via a Modified Artificial Bee Colony Algorithm
Hongfei Jia et al.
IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2020)
Mathematical prediction of the time evolution of the COVID-19 pandemic in Italy by a Gauss error function and Monte Carlo simulations
Ignazio Ciufolini et al.
EUROPEAN PHYSICAL JOURNAL PLUS (2020)
A bi-objective home healthcare routing and scheduling problem considering patients' satisfaction in a fuzzy environment
Amir Mohammad Fathollahi-Fard et al.
APPLIED SOFT COMPUTING (2020)
Energy consumption and profit -oriented disassembly line balancing for waste electrical and electronic equipment
Kaipu Wang et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Model review and algorithm comparison on multi-objective disassembly line balancing
Yuanjun Laili et al.
JOURNAL OF MANUFACTURING SYSTEMS (2020)
Approach based on TOPSIS and Monte Carlo simulation methods to evaluate lake eutrophication levels
Song-Shun Lin et al.
WATER RESEARCH (2020)
A Stochastic Sequence-dependent Multi-objective Disassembly Line Balancing Model Subject to Task Failure and Resource Constraint via Multi-objective Cuckoo Search
TianYuan Wang et al.
2020 IEEE INTERNATIONAL CONFERENCE ON SYSTEMS, MAN, AND CYBERNETICS (SMC) (2020)
Impact of emission reduction investments on decisions and profits in a supply chain with two competitive manufacturers
Jinjin Liu et al.
COMPUTERS & INDUSTRIAL ENGINEERING (2020)
Disassembly line balancing problem: a review of the state of the art and future directions
Eren Ozceylan et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2019)
Modeling and Planning for Dual-Objective Selective Disassembly Using AND/OR Graph and Discrete Artificial Bee Colony
Guangdong Tian et al.
IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2019)
Nonempirical hybrid multi-attribute decision-making method for design for remanufacturing
Qing-Shan Gong et al.
ADVANCES IN MANUFACTURING (2019)
A memetic algorithm using emperor penguin and social engineering optimization for medical data classification
Santos Kumar Baliarsingh et al.
APPLIED SOFT COMPUTING (2019)
Recycling End-of-Life Electric Vehicle Lithium-Ion Batteries
Mengyuan Chen et al.
JOULE (2019)
The Social Engineering Optimizer (SEO)
Amir Mohammad Fathollahi-Fard et al.
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2018)
Disassembly Sequence Planning Considering Fuzzy Component Quality and Varying Operational Cost
Guangdong Tian et al.
IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2018)
Dual-Objective Program and Scatter Search for the Optimization of Disassembly Sequences Subject to Multiresource Constraints
Xiwang Guo et al.
IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2018)
A Pareto firefly algorithm for multi-objective disassembly line balancing problems with hazard evaluation
Lixia Zhu et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2018)
An improved gravitational search algorithm for profit-oriented partial disassembly line balancing problem
Yaping Ren et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2017)
A novel approach for parallel disassembly design based on a hybrid fuzzy-time model
Zhi-feng Zhang et al.
JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A (2015)
Dealing with uncertainty in disassembly line design
M. Lounes Bentaha et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2014)
A Chance Constrained Programming Approach to Determine the Optimal Disassembly Sequence
Guangdong Tian et al.
IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2013)
Influence factor analysis and prediction models for component removal time in manufacturing
Guangdong Tian et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2013)
Evaluation model and algorithm of product disassembly process with stochastic feature
Guangdong Tian et al.
CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2012)
Energy evaluation method and its optimization models for process planning with stochastic characteristics: A case study in disassembly decision-making
Guangdong Tian et al.
COMPUTERS & INDUSTRIAL ENGINEERING (2012)
Probability Evaluation Models of Product Disassembly Cost Subject to Random Removal Time and Different Removal Labor Cost
Guangdong Tian et al.
IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2012)
Expected energy analysis for industrial process planning problem with fuzzy time parameters
Guangdong Tian et al.
COMPUTERS & CHEMICAL ENGINEERING (2011)
Precision Evaluation of Three-dimensional Feature Points Measurement by Binocular Vision
Guan Xu et al.
JOURNAL OF THE OPTICAL SOCIETY OF KOREA (2011)
Disassembly to order system under uncertainty
E Kongar et al.
OMEGA-INTERNATIONAL JOURNAL OF MANAGEMENT SCIENCE (2006)