Related references
Note: Only part of the references are listed.
Article
Chemistry, Multidisciplinary
Zhiyan Chen et al.
Summary: In this work, ternary charge transfer crystals were used to realize organic multiferroic magnetoelectric coupling effect. The introduction of the third component induced a dimerization between neighbor donor and acceptor, breaking the lattice symmetry and leading to a nonpolar to polar phase transition. The dipolar polarization could be effectively tuned by a magnetic field, resulting in the magnetoelectric coupling effect. Additionally, the introduction of the third component also modified the electron-phonon interaction, leading to anisotropic magnetism in ternary crystals.
Article
Chemistry, Physical
Xinjun He et al.
Summary: Organic solar cells (OSC) require control over molecular crystal orientation, domain size, and vertical distribution to improve charge collection. To achieve this, a liquid additive is used to enhance phase separation during film formation, resulting in a favorable vertical distribution and enlarged domain size. This manipulation improves exciton/charge dynamics, leading to high fill factors and efficiency of 18.72%.
ADVANCED ENERGY MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Heng Zhao et al.
Summary: This study demonstrates a novel approach to achieve high-efficiency fabrication of large-area, thick organic solar cells using slot-die coating and a ternary strategy. By incorporating a highly crystalline molecule, BTR-Cl, the phase separation kinetics of the film is regulated, resulting in improved molecular crystallinity and vertical phase separation, leading to high power conversion efficiencies.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Jianqiang Qin et al.
Summary: The study introduces a volatile solid additive-assisted sequential deposition strategy to optimize the morphology of the active layer in organic solar cells, resulting in enhanced performance. The combination of a volatile solid additive and sequential deposition method proves to be effective in developing high-performance OSCs.
Article
Chemistry, Physical
Lei Zhu et al.
Summary: Morphological control of donor and acceptor domains is crucial for efficient organic photovoltaics, and this study demonstrates a double-fibril network strategy to achieve a high power conversion efficiency of 19.3%.
Article
Chemistry, Multidisciplinary
Guilong Cai et al.
Summary: The study achieved a high open-circuit voltage binary D18-Cl/L8-BO system with the use of a volatile solid additive, 1,4-diiodobenzene (DIB), increasing crystalline packing and decreasing vertical domain sizes of phase separation. This led to improved exciton dissociation, charge transport, and collection, resulting in the best-performing device with an efficiency of 18.7%, making it the highest V-OC reported among OSCs with efficiencies over 17%. This work demonstrates the potential of solid additives with two iodine atoms to tune morphology in the vertical direction for future optimization of OSCs.
Article
Chemistry, Multidisciplinary
Lian Zhong et al.
Summary: Recently, highly volatile solid additives have been gaining attention due to their ability to enhance molecular packing order and potentially solve the issues of poor reproducibility and instability in polymer solar cells (PSCs) caused by solvent additives. This study introduces a commercially available, low-cost, and highly volatile material, naphthalene (NA), as a solid additive in PSCs based on PM6: Y6. NA is able to effectively restrict excessive aggregation and produce comparable efficiencies to PSCs processed with traditional solvent additives. The results show that NA-processed PSCs achieve a higher maximum power conversion efficiency (PCE) of 16.52% compared to CN-processed PSCs with thermal annealing (TA). NA-processed PSCs also exhibit comparable efficiencies without TA treatment and higher reproducibility/stability than CN-processed PSCs. This study demonstrates the potential of using low-cost and highly volatile solid additives to improve device performance in PSCs, as well as the possibility of exploring new solid additives that can be easily made volatile without TA.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Wei Gao et al.
Summary: By adopting the asymmetric selenium substitution strategy and using a pseudosymmetric electron acceptor, the power conversion efficiency of planar-mixed heterojunction organic solar cells (PMHJ OSCs) can be significantly improved. The increased dielectric constant and improved dimer packing lead to lower exciton binding energy, more efficient exciton dissociation, and reduced radiative recombination loss. These findings provide an effective way to develop highly efficient acceptor materials for OSCs.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Yanan Wei et al.
Summary: The variation of the vertical component distribution has a significant impact on the photovoltaic performance of organic solar cells. This study demonstrates that sequential deposition of materials can improve the efficiency of solar cells.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Jingwei Xue et al.
Summary: Organic solar cells (OSCs) have shown great potential, but traditional methods and toxic solvents limit their commercialization and efficiency. A dual-slot-die sequential processing (DSDS) strategy is proposed to overcome these limitations. The unique film-formation mechanism contributes to the improved performance.
ADVANCED MATERIALS
(2022)
Article
Polymer Science
Yong Cui et al.
Summary: The application of organic photovoltaic (OPV) cells in driving off-grid microelectronic devices under indoor lighting has attracted attention. This study successfully optimized the alkyl chains of non-fullerene acceptors to suppress energetic disorder and improve the photovoltaic efficiency of OPV cells. The results suggest that modulation of energetic disorder is crucial for further improving the efficiency of OPV cells.
CHINESE JOURNAL OF POLYMER SCIENCE
(2022)
Article
Chemistry, Multidisciplinary
Congqi Li et al.
Summary: Volatile solid additives (SADs) are a simple and effective method to adjust the film morphology of high-performance organic solar cells (OSCs). This study designed and synthesized two volatilizable SADs, and the results revealed that the planar SAD2 can more easily insert between Y6 molecules, leading to a tighter molecular packing mode and improved photovoltaic performance.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2022)
Article
Energy & Fuels
Kui Jiang et al.
Summary: Researchers have discovered that using donor and acceptor materials with intrinsically weaker exciton binding strengths in sequentially processed planar-mixed heterojunction devices can alleviate photocurrent loss caused by triplet states and achieve higher power conversion efficiencies.
Article
Chemistry, Physical
Feng-Zhe Cui et al.
Summary: This study presents a guest-nanofill strategy to improve the performance of all-polymer solar cells. By adding a third component (small molecule B1), the power conversion efficiency and thermal stability of the cells are significantly enhanced. The vertical-phase-locking effect resulting from the guest-nanofill strategy improves the phase-separated morphology of the films.
ACS ENERGY LETTERS
(2022)
Article
Materials Science, Multidisciplinary
Jiali Song et al.
Summary: The study demonstrates that the incorporation of 2-methoxynaphthalene (2-MN) into PM6:PY-DT blend can effectively manipulate the aggregations of molecules and achieve high efficiency for all-polymer solar cells (all-PSCs). The use of 2-MN as a green and solid additive is a simple and feasible strategy to optimize morphology, promoting eco-friendly fabrication and application of all-PSCs.
Article
Chemistry, Multidisciplinary
Chengliang He et al.
Summary: Manipulating the donor:acceptor energetics is crucial for achieving balanced charge separation and recombination in organic solar cells (OSCs). In this study, a non-fullerene electron acceptor, BTP-H2, was designed and synthesized to pair with the polymer donor PM6, showing strong intermolecular interaction and near-zero highest occupied molecular orbital (HOMO) offset. The results demonstrated efficient charge separation and optimized energy conversion, leading to high-performance OSCs with a power conversion efficiency (PCE) of 18.5% and a peak photon-to-electron response of approximately 90%.
ENERGY & ENVIRONMENTAL SCIENCE
(2022)
Article
Chemistry, Multidisciplinary
Sunan Bao et al.
Summary: Controlling the self-assembly of organic semiconductors to form well-developed nanoscale phase separation is critical for building high-performance organic solar cells. A new approach utilizing the synergistic effect of DTT and CN is developed to tune the morphology of the photoactive layer, leading to a significant increase in power-conversion efficiency and fill factor in ternary OSCs processed with dual additives of CN and DTT.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Runnan Yu et al.
Summary: The use of the small molecule additive DTBF, with high volatility and a strong quadrupole moment, to control the active layer morphology in organic solar cells has led to enhanced photoelectric properties and efficiencies reaching over 17%. This study highlights a simple approach to optimizing active layer morphology by manipulating the quadrupole moment of volatile solid additives.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Ming Zhang et al.
Summary: By utilizing the new physical properties of intimate eutectic mixing in nonfullerene-acceptor-based D-A(1)-A(2) ternary blends, the thin film morphology and electronic properties in organic solar cells are finely tuned to achieve significant enhancement in power conversion efficiency (PCE). The aligned cascading energy levels and suppressed recombination channels confirm efficient charge transfer and transport, leading to an improved PCE of 17.84%.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Physical
Zeng Chen et al.
Summary: Nonfullerene acceptor organic solar cells with power conversion efficiency up to 18% show the formation of NFA triplet exciton as a main non-radiative recombination and energy loss channel. Side-chain fluorination in high-efficiency NFA OSCs efficiently inhibits charge recombination to NFA triplet excitons, leading to higher V-OC and PCE. This paves the way for OSCs with lower V-OC loss and efficiency exceeding 20%.
Article
Chemistry, Multidisciplinary
Hongyu Fan et al.
Summary: A new and universal morphology controlling method using volatilizable anthracene as solid additive was developed to improve the performance of fused-ring nonfullerene acceptor-based polymer solar cells. This method significantly enhanced the power conversion efficiency of the devices and showed potential for general application in various active layer systems. The remarkable results suggest unprecedented opportunities for building state-of-the-art PSCs.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Yong Cui et al.
Summary: By combining material design and ternary blending strategy, a maximum power conversion efficiency of 19.0% is achieved in single-junction OPV cells. Optimized active layer structure significantly improves the photovoltaic parameters, enhancing the performance and PCE values of the cells.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Xue Zhang et al.
Summary: The study introduces solid but volatile additives to replace common liquid additives with high boiling points in nonfullerene organic solar cells, showing improved efficiency and operational stability through molecular dynamics simulations. This universal strategy enhances pi-pi stacking among nonfullerene acceptor molecules and demonstrates significant improvements in efficiency and operational lifetime in various OSC systems.
Article
Chemistry, Physical
Jiehao Fu et al.
Summary: Introducing a solid additive, 1,4-diiodobenzene (DIB), can enhance the active layer structure of organic solar cells (OSC) and improve performance.
DIB treated OSCs exhibit tighter molecular stacking and more ordered molecular arrangement, leading to increased power conversion efficiency.
In addition to performance enhancement, DIB treatment also improves device stability and is versatile for various types of OSCs.
Article
Chemistry, Physical
Pengqing Bi et al.
Summary: Introducing HDO-4Cl increased the exciton diffusion length in the acceptor phase, reducing non-radiative charge recombination and improving photon utilization efficiency in PBDB-TF: eC9-based OPV cells. This led to achieving a high-efficiency OPV cell with outstanding power conversion efficiency, demonstrating the effectiveness of regulating exciton behaviors in reducing energy loss.
Article
Physics, Applied
Zhiyan Chen et al.
Summary: Adjusting the electron-phonon coupling coefficient by changing the doping ratio of the third component effectively suppresses charge recombination, which is also influenced by external light intensity and temperature. Insights gained from this study may assist in further improving organic photovoltaics.
APPLIED PHYSICS LETTERS
(2021)
Article
Chemistry, Multidisciplinary
Yong Cui et al.
ADVANCED MATERIALS
(2020)
Article
Chemistry, Multidisciplinary
Rui Wang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2020)
Article
Multidisciplinary Sciences
Guichuan Zhang et al.
NATURE COMMUNICATIONS
(2020)
Article
Chemistry, Physical
Andrej Classen et al.
ADVANCED ENERGY MATERIALS
(2019)
Article
Chemistry, Multidisciplinary
Runnan Yu et al.
ADVANCED MATERIALS
(2019)
Review
Chemistry, Multidisciplinary
Caitlin McDowell et al.
ADVANCED MATERIALS
(2018)
Article
Multidisciplinary Sciences
Runnan Yu et al.
NATURE COMMUNICATIONS
(2018)
Article
Multidisciplinary Sciences
Yiwei Zhang et al.
SCIENTIFIC REPORTS
(2017)
Article
Chemistry, Physical
Bertrand J. Tremolet de Villers et al.
CHEMISTRY OF MATERIALS
(2016)
Article
Chemistry, Physical
Xian-Kai Chen et al.
ADVANCED ENERGY MATERIALS
(2016)
Article
Chemistry, Physical
Florian Machui et al.
Article
Multidisciplinary Sciences
Artem A. Bakulin et al.
Article
Chemistry, Multidisciplinary
Lilian Chang et al.
ADVANCED FUNCTIONAL MATERIALS
(2011)
Article
Chemistry, Multidisciplinary
Corey V. Hoven et al.
ADVANCED MATERIALS
(2010)
Article
Chemistry, Multidisciplinary
Jae Kwan Lee et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2008)
Article
Physics, Applied
A. Al Salman et al.
APPLIED PHYSICS LETTERS
(2007)
Article
Materials Science, Multidisciplinary
S Guha et al.
Article
Chemistry, Physical
M Bednarz et al.
JOURNAL OF PHYSICAL CHEMISTRY B
(2001)
