4.5 Article

Characterization of sulfur and chlorine behavior during pyrolysis of biomass and waste

Related references

Note: Only part of the references are listed.
Article Chemistry, Applied

Study on the mechanism of lead release from ash under the action of high-temperature flue gas

Wenting Xu et al.

Summary: This study investigated the effect of the interaction between high-temperature combustion flue gas and ash on the distribution of Pb using a double-layer fixed-bed reactor. The results showed noticeable gaseous Pb adsorption by ash in the case of high-Pb flue gas and less ash melting, while significant Pb release from ash occurred under the action of high-temperature flue gas in other cases. The release of Pb from ash was found to be influenced by ash melting, with gaseous Na and reducing components promoting the release by promoting ash melting, and H2S and HCl promoting the release by forming more volatile compounds.

FUEL PROCESSING TECHNOLOGY (2022)

Article Energy & Fuels

Experimental study on transformation of alkali and alkaline earth metals during biomass gasification

Lei Deng et al.

Summary: A fixed-bed reactor was used to simulate CO2 gasification and examine the transformation of alkali and alkaline earth metals (AAEMs) in biomass. The study found that the release of AAEMs followed a specific sequence and the alkali metals mainly appeared as water-soluble inorganic salts. Higher temperatures led to the formation of compounds with other elements. Larger particle sizes were beneficial for the transformation of potassium from water-soluble to organic forms, particularly in candlenut wood.

JOURNAL OF THE ENERGY INSTITUTE (2022)

Article Engineering, Chemical

Design and thermal characterization of an induction-heated reactor for pyrolysis of solid waste

Oscar Sosa Sabogal et al.

Summary: A small-scale induction heated reactor (IHR) was developed for studying fast pyrolysis, which showed good reproducibility with results obtained in a pilot scale fluidized bed reactor (FBR), demonstrating differences in gas and tar composition attributed to secondary reactions influenced by higher heat transfer rates and bed material in FBR.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2021)

Article Materials Science, Multidisciplinary

Stabilisation of sheep wool fibres under air atmosphere: Study of physicochemical changes

Ana Claudia Pina et al.

Summary: This study analyzed the oxidative stabilization process of wool as a precursor for carbon fibers, revealing that the structure and morphology of the fibers can be preserved below 400℃. The chemical composition of the wool changed with the stabilization temperature, resulting in materials with fibrous morphology and high carbon yield after oxidation at 300℃, suitable for producing carbon fibers.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2021)

Article Environmental Sciences

On the Measurement of the Main Inorganic Contaminants Derived from Cl, S and N in Simulated Waste-Derived Syngas

Vanessa F. de Almeida et al.

WASTE AND BIOMASS VALORIZATION (2020)

Article Engineering, Environmental

Speciation of Sulfur in Biochar Produced from Pyrolysis and Gasification of Oak and Corn Stover

Singfoong Cheah et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2014)

Article Chemistry, Analytical

Transformation of sulfur during pyrolysis of inertinite-rich coals and correlation with their characteristics

Meijun Wang et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2013)

Review Energy & Fuels

An overview of the organic and inorganic phase composition of biomass

Stanislav V. Vassilev et al.

Article Energy & Fuels

Release of K, Cl, and S during Pyrolysis and Combustion of High-Chlorine Biomass

Joakim M. Johansen et al.

ENERGY & FUELS (2011)

Article Energy & Fuels

Sulfur transformations during thermal conversion of herbaceous biomass

JN Knudsen et al.

ENERGY & FUELS (2004)

Article Energy & Fuels

Inorganic matter characterization in vegetable biomass feedstocks

F Suárez-García et al.