☆ 4.7 Article

3D-printed GelMA/CaSiO3 composite hydrogel scaffold for vascularized adipose tissue restoration

REGENERATIVE BIOMATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Biomedical

Silicate ions as soluble form of bioactive ceramics alleviate aortic aneurysm and dissection

Yumei Que et al.

Summary: Silicate ions, as soluble form of bioactive ceramics, effectively alleviate aortic aneurysm and dissection by regulating the local vascular microenvironment and reducing senescence, inflammation, and cell apoptosis. In vitro experiments show that silicate ions can alleviate senescence, inflammation, and apoptosis of vascular-related cells and regulate their interactions. In vivo studies confirm that silicate ions can effectively alleviate aortic senescence, inflammation, and cell apoptosis, leading to reduced aortic dilation and elastin degradation. This bioactive ceramic derived therapy has the potential to attenuate AAD progression.

BIOACTIVE MATERIALS (2023)

Add to Collection

Review Biotechnology & Applied Microbiology

Overcoming functional challenges in autologous and engineered fat grafting trends

Gretel S. Major et al.

Summary: Autologous fat grafting shows promise in repairing soft tissue deformities, but engineered solutions are needed to improve adipose tissue survival due to high resorption rates. Advances in material development and biofabrication have laid the foundation for functional adipose tissue constructs, but a balance is required between clinically feasible delivery and enhanced graft structural integrity. A new approach that combines clinical and research objectives can assist in developing mature adipose tissue constructs with controlled spatial arrangement and increased potential for neovascularization.

TRENDS IN BIOTECHNOLOGY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Engineering Densely Packed Adipose Tissue via Environmentally Controlled In-Bath 3D Bioprinting

Minjun Ahn et al.

Summary: This study demonstrates the successful engineering of fully-mature densely packed adipose tissue (DPAT) in vitro using environmentally controlled in-bath 3D bioprinting. A bath suspension composed of hybrid bioink and decellularized matrix is utilized to selectively and compactly proliferate and differentiate preadipocytes into mature adipocytes. The resulting DPAT construct exhibits physiological changes associated with obesity under relevant conditions and shows potential in overcoming obesity-related complications.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Engineering, Biomedical

Multiscale Hierarchical Architecture-Based Bioactive Scaffolds for Versatile Tissue Engineering

Hongshi Ma et al.

Summary: This study utilizes bioinspired calcium silicate nanowires and alginate composite hydrogels as building blocks to construct multiscale hierarchical bioactive scaffolds, and successfully promotes tissue regeneration from tendon to bone.

ADVANCED HEALTHCARE MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Bioactive NIR-II Light-Responsive Shape Memory Composite Based on Cuprorivaite Nanosheets for Endometrial Regeneration

Chenle Dong et al.

Summary: A NIR-II light-responsive shape memory composite has been developed for preventing intrauterine adhesions (IUAs) and promoting the regeneration of injured endometrium. The composite, consisting of cuprorivaite nanosheets as photothermal conversion agents and a polymer as shape memory building blocks, shows excellent shape memory performance and antiadhesion effect under NIR-II light. In addition, the released ions can stimulate endometrial regeneration. This study provides a new strategy for treating IUAs and has important clinical implications.

ADVANCED SCIENCE (2022)

Add to Collection

Article Engineering, Biomedical

Multi-functional wound dressings based on silicate bioactive materials

Chen Fan et al.

Summary: The article introduces an ideal wound dressing that actively stimulates wound healing and has multi-functional capabilities to address various specific wound conditions. Silicate bioceramics and bioglasses are promising materials that can accelerate wound healing by regulating cells. These materials can be further functionalized through structural design or doping with functional components to address different wound healing demands.

BIOMATERIALS (2022)

Add to Collection

Article Polymer Science

Bioprinting of 3D Adipose Tissue Models Using a GelMA-Bioink with Human Mature Adipocytes or Human Adipose-Derived Stem Cells

Franziska B. Albrecht et al.

Summary: This study investigates the relationship between adipose tissue and multiple diseases, highlighting the importance of suitable in vitro models for research purposes. The researchers successfully developed physiological in vitro adipose tissue models using bioprinting technology.

GELS (2022)

Add to Collection

Article Engineering, Biomedical

Flexible Adipose-Vascular Tissue Assembly Using Combinational 3D Printing for Volume-Stable Soft Tissue Reconstruction

Won-Woo Cho et al.

Summary: This study introduces a new concept of assembling cell-laden tissue modules for soft tissue engineering, aiming to achieve nonhypoxic, flexible, and volume-stable tissue assembly. The significance of engineered tissue assembly is demonstrated through various evaluations, showing stable volume and significant neovascularization/adipogenesis in the implanted assembly. The work presents a novel approach of cell printing-based tissue assembly for functional reconstruction of soft tissue.

ADVANCED HEALTHCARE MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Strontium ions protect hearts against myocardial ischemia/reperfusion injury

Min Xing et al.

Summary: The injection of composite hydrogels containing strontium ions into infarcted myocardium after ischemia and reperfusion in mice significantly attenuated functional deterioration and scar formation, while also reducing cardiomyocyte apoptosis and promoting angiogenesis. These findings suggest the cardioprotective effects of strontium ions against ischemia/reperfusion injury, providing a potential new therapeutic approach for ischemic heart disease.

SCIENCE ADVANCES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printed Enzyme-Functionalized Scaffold Facilitates Diabetic Bone Regeneration

Chen Yang et al.

Summary: A multifunctional scaffold for diabetic bone defect has been developed, with properties including osteogenesis, angiogenesis, and anti-inflammation. Enzyme functionalization and mineralization were key strategies in addressing the high risk of fractures and poor bone healing ability in diabetic patients. The scaffold showed promising outcomes in enhancing bone tissue regeneration in in vitro and in vivo studies, highlighting the potential of multifunctional scaffolds for diabetic bone regeneration.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Targeted hot ion therapy of infected wound by glycol chitosan and polydopamine grafted Cu-SiO2 nanoparticles

Qing Xu et al.

Summary: This study developed multifunctional nanoparticles for combating drug-resistant bacteria and repairing infectious tissue. These nanoparticles showed high-efficiency, quick, and long-term antibacterial effects through near-infrared light-induced heating and copper ion release, as well as immune response promotion and stimulation of angiogenesis.

NANO TODAY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Three-dimensional bioprinting adipose tissue and mammary Organoids feasible for artificial breast structure regeneration

Yutong Chen et al.

Summary: Breast reconstruction is crucial for mental health, current methods have limitations, and 3D bioprinting technology shows promise as an alternative solution.

MATERIALS & DESIGN (2021)

Add to Collection

Review Cell Biology

In situ Adipogenesis in Biomaterials Without Cell Seeds: Current Status and Perspectives

Jiqiao Yang et al.

Summary: Current strategies for soft tissue replacement include autologous fat grafts and tissue fillers, but they have drawbacks. Adipose tissue engineering (ATE) has emerged as a suitable substitute for soft tissue repair, utilizing scaffolds, cells, and a tolerant environment to regenerate bioactive vascularized adipose tissue.

FRONTIERS IN CELL AND DEVELOPMENTAL BIOLOGY (2021)

Add to Collection

Article Engineering, Biomedical

Engineering of diseased human skin equivalent using 3D cell printing for representing pathophysiological hallmarks of type 2 diabetes in vitro

Byoung Soo Kim et al.

Summary: The study successfully developed a 3D diseased skin tissue model with pathophysiological hallmarks of type 2 diabetes using 3D cell printing technique. By incorporating a perfusable vascularized diabetic hypodermis, the structural similarities and diabetic properties of the model were enhanced. The feasibility of using this new disease model for drug development was demonstrated through the application of test drugs.

BIOMATERIALS (2021)

Add to Collection

Article Engineering, Biomedical

3D Printing of Strontium Silicate Microcylinder-Containing Multicellular Biomaterial Inks for Vascularized Skin Regeneration

Jingge Ma et al.

Summary: This study presents a novel approach to fabricate functional skin substitutes with angiogenesis-induced function using cell-writing bioprinting technology. The vascularization-induced multicellular system based on strontium silicate microcylinders demonstrates outstanding angiogenic activity, accelerating the healing of acute and chronic wounds in animal models. This study offers a valuable strategy for regenerating vascularized complex and hierarchical tissues.

ADVANCED HEALTHCARE MATERIALS (2021)

Add to Collection

Review Surgery

3D Printing in Breast Reconstruction: From Bench to Bed

Xingdou Mu et al.

Summary: Surgical management of breast cancer often results in breast loss, and current breast reconstruction methods may not be sufficient for tissue replacement needs. Tissue engineering using emerging materials shows promise in generating suitable replacements. Three-dimensional printing technology has gained significant interest and application in the medical field, particularly in complex medical situations requiring anatomical surgical considerations and precise reconstructive procedures.

FRONTIERS IN SURGERY (2021)

Add to Collection

Review Polymer Science

Silicone-based biomaterials for biomedical applications: Antimicrobial strategies and 3D printing technologies

Mina Zare et al.

Summary: Silicone, a synthetic polymer widely used in the biomedical industry since 1940, is praised for its excellent mechanical properties and biocompatibility. Its inert nature and hydrophobic surface make silicone biomaterials highly biocompatible. Silicone is utilized in various biomedical applications, such as medical inserts, specialty contact lenses, and drains.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Multidisciplinary Sciences

Conditioning the microenvironment for soft tissue regeneration in a cell free scaffold

Irini Gerges et al.

Summary: By adjusting the mechanical properties and biochemical cues of 3D scaffolds, soft tissue formation can be promoted, with mechanical and biochemical conditioning showing equivalent efficacy in promoting adipose tissue formation. This study opens up a new avenue for designing synthetic 3D scaffolds for the regeneration of large volumes of soft and adipose tissue.

SCIENTIFIC REPORTS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printed Wesselsite Nanosheets Functionalized Scaffold Facilitates NIR-II Photothermal Therapy and Vascularized Bone Regeneration

Chen Yang et al.

Summary: This study presents a novel multifunctional bone scaffold integrating a NIR-II photothermal conversion agent with tremendous bioactivity with polycaprolactone via 3D printing. The scaffold triggers osteosarcoma ablation and promotes cellular proliferation and osteogenic differentiation, leading to enhanced vascularized bone regeneration in vivo. This research provides a new approach for the development of therapeutic bioceramic-based multifunctional bone scaffolds for repairing tumor-induced bone defects.

ADVANCED SCIENCE (2021)

Add to Collection

Review Biochemistry & Molecular Biology

Application of 3D bioprinting in the prevention and the therapy for human diseases

Hee-Gyeong Yi et al.

Summary: Rapid development of vaccines and therapeutics is crucial to combat new pathogens and infectious diseases. Introducing advanced technologies, such as 3D bioprinting, for drug discovery can accelerate the process and offer advantages in the production of medicine and cell/drug delivery systems.

SIGNAL TRANSDUCTION AND TARGETED THERAPY (2021)

Add to Collection

Article Engineering, Biomedical

Tuning the mechanics of 3D-printed scaffolds by crystal lattice-like structural design for breast tissue engineering

Muran Zhou et al.

BIOFABRICATION (2020)

Add to Collection

Review Oncology

Patient preferences for locoregional therapy in early-stage breast cancer

Christina A. Minami et al.

BREAST CANCER RESEARCH AND TREATMENT (2020)

Add to Collection

Review Pharmacology & Pharmacy

Engineered biomaterial strategies for controlling growth factors in tissue engineering

Na Guan et al.

DRUG DELIVERY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Bioceramics to regulate stem cells and their microenvironment for tissue regeneration

Yanling Zhou et al.

MATERIALS TODAY (2019)

Add to Collection

Article Surgery

Autogenous Fat Grafting to the Breast and Gluteal Regions: Safety Profile Including Risks and Complications

Mustafa Chopan et al.

PLASTIC AND RECONSTRUCTIVE SURGERY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Ion Therapy: A Novel Strategy for Acute Myocardial Infarction

Min Yi et al.

ADVANCED SCIENCE (2019)

Add to Collection

Review Surgery

The use of acellular dermal matrix in breast reconstruction: evolution of techniques over 2 decades

Ilana G. Margulies et al.

GLAND SURGERY (2019)

Add to Collection

Article Engineering, Biomedical

Regulation of immune response by bioactive ions released from silicate bioceramics for bone regeneration

Yan Huang et al.

ACTA BIOMATERIALIA (2018)

Add to Collection

Review Oncology

Recent Advances and Future Directions in Postmastectomy Breast Reconstruction

Niamh O'Halloran et al.

CLINICAL BREAST CANCER (2018)

Add to Collection

Editorial Material Medicine, General & Internal

Breast Reconstruction Following Breast Cancer Treatment-2018

Gordon K. Lee et al.

JAMA-JOURNAL OF THE AMERICAN MEDICAL ASSOCIATION (2018)

Add to Collection

Review Engineering, Multidisciplinary

A Review of 3D Printing Technology for Medical Applications

Qian Yan et al.

ENGINEERING (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Silicon-Enhanced Adipogenesis and Angiogenesis for Vascularized Adipose Tissue Engineering

Xiaoya Wang et al.

ADVANCED SCIENCE (2018)

Add to Collection

Review Materials Science, Biomaterials

Naturally derived proteins and glycosaminoglycan scaffolds for tissue engineering applications

Nehar Celikkin et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)

Add to Collection

Article Surgery

Current Trends in Postmastectomy Breast Reconstruction

Hina Panchal et al.

PLASTIC AND RECONSTRUCTIVE SURGERY (2017)

Add to Collection

Article Engineering, Biomedical

Double printing of hyaluronic acid/poly(glycidol) hybrid hydrogels with poly(ε-caprolactone) for MSC chondrogenesis

Simone Stichler et al.

BIOFABRICATION (2017)

Add to Collection

Article Engineering, Biomedical

Proposal to assess printability of bioinks for extrusion-based bioprinting and evaluation of rheological properties governing bioprintability

Naomi Paxton et al.

BIOFABRICATION (2017)

Add to Collection

Review Medicine, General & Internal

Procedure, applications, and outcomes of autologous fat grafting

Francesco Simonacci et al.

ANNALS OF MEDICINE AND SURGERY (2017)

Add to Collection

Article Oncology

The association between complications and quality of life after mastectomy and breast reconstruction for breast cancer

John P. Browne et al.

CANCER (2017)

Add to Collection

Article Engineering, Biomedical

Highly defined 3D printed chitosan scaffolds featuring improved cell growth

Lisa Elviri et al.

BIOMEDICAL MATERIALS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

3D-Printed Bioactive Ca3SiO5 Bone Cement Scaffolds with Nano Surface Structure for Bone Regeneration

Chen Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Engineering, Biomedical

3D bioprinting of GelMA scaffolds triggers mineral deposition by primary human osteoblasts

Christine McBeth et al.

BIOFABRICATION (2017)

Add to Collection

Article Engineering, Biomedical

Silk based bioinks for soft tissue reconstruction using 3-dimensional (3D) printing with in vitro and in vivo assessments

Maria J. Rodriguez et al.

BIOMATERIALS (2017)

Add to Collection

Review Biotechnology & Applied Microbiology

Scaffolds and cells for tissue regeneration: different scaffold pore sizes-different cell effects

Ieva Bruzauskaite et al.

CYTOTECHNOLOGY (2016)

Add to Collection

Article Biotechnology & Applied Microbiology

A 3D bioprinting system to produce human-scale tissue constructs with structural integrity

Hyun-Wook Kang et al.

NATURE BIOTECHNOLOGY (2016)

Add to Collection

Article Surgery

Adipose Tissue and Extracellular Matrix Development by Injectable Decellularized Adipose Matrix Loaded with Basic Fibroblast Growth Factor

Shipin Zhang et al.

PLASTIC AND RECONSTRUCTIVE SURGERY (2016)

Add to Collection

Article Materials Science, Biomaterials

3D Bioprinting of Spatially Heterogeneous Collagen Constructs for Cartilage Tissue Engineering

Stephanie Rhee et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)

Add to Collection

Article Materials Science, Biomaterials

3D Bioprinting of Spatially Heterogeneous Collagen Constructs for Cartilage Tissue Engineering

Stephanie Rhee et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)

Add to Collection

Article Engineering, Biomedical

Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells

Liliang Ouyang et al.

BIOFABRICATION (2016)

Add to Collection

Article Engineering, Biomedical

Biomimetic 3D tissue printing for soft tissue regeneration

Falguni Pati et al.

BIOMATERIALS (2015)

Add to Collection

Article Engineering, Biomedical

Three-dimensional bioprinting of complex cell laden alginate hydrogel structures

Atabak Ghanizadeh Tabriz et al.

BIOFABRICATION (2015)

Add to Collection

Article Materials Science, Biomaterials

Effects of substrate stiffness on adipogenic and osteogenic differentiation of human mesenchymal stem cells

Wen Zhao et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)

Add to Collection

Article Pathology

Angiogenic growth factor synergism in a murine tissue engineering model of angiogenesis and adipogenesis

John A. Rophael et al.

AMERICAN JOURNAL OF PATHOLOGY (2007)

Add to Collection

Article Surgery

De novo adipose tissue generation through long-term, local delivery of insulin and insulin-like growth factor-1 by PLGA/PEG microspheres in an in vivo rat model: A novel concept and capability

E Yuksel et al.

PLASTIC AND RECONSTRUCTIVE SURGERY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.